Search

Penicisteckins A-D (1-4), two pairs of atropodiastereomeric biaryl-type hetero- and homodimeric bis-isochromans with 7,5'- and 7,7'-linkages and a pair of atropodiastereomeric 2-(isochroman-5-yl)-1,4-benzoquinone derivatives [penicisteckins E (5) and F (6)], were isolated from the Penicillium steckii HNNU-5B18. Their structures including the absolute configuration were determined by extensive spectroscopic and single-crystal X-ray diffraction analysis and TDDFT-ECD calculations. Both the bis-isochromans and the isochroman/1,4-benzoquinone conjugates represent novel biaryl scaffolds containing both central and axial chirality elements. The monomer anserinone B (8) exhibited potent antibacterial activities against Staphylococcus aureus ATCC 29213 and methicillin-resistant Staphylococcus aureus with minimal inhibition concentration values ranging from 2 to 8 μg mL-1. Plausible biosynthetic pathways of 1-6 are proposed, which suggest how the absolute configurations of the isolates were established during the biosynthetic scheme.

Broadband high-efficiency luminescent materials have become a hot spot in lead-free perovskite research. There are relatively few broadband yellow-green phosphors with both ultraviolet and blue excitation ranges, which make them more suitable for phosphor-converted white LEDs. Through the ion-exchanged strategy, Cs2Hf1-xTexCl6 (CH1-xTxC) vacancy halide double perovskites were successfully prepared at room temperature. Using different excitation ranges of CH1-xTxC, two types of high-quality white LEDs are obtained. By combining density functional theory calculations and experiments, it is proved that this bright broadband yellow-green emission (photoluminescence quantum yield of 83.46%) is not only derived from the ion transitions of Te4+ but also exhibits the inherent characteristics of self-trapped exciton emission. Our results not only broaden the application fields of lead-free halide perovskites but also provide further insights into the luminescence mechanism.

The rapid development of flexible triboelectric nanogenerators (TENGs) has become an alternative to batteries for wearable devices. Stretchable, multifunctional, and low-cost are the primary development directions for these wearable devices based on TENG. Herein, a stretchable triboelectric generator with coplanar integration was designed for energy harvesting and force sensing. The industrial conductive silicone and silicone were used to fabricate the TENG with a thickness of less than 0.9 mm. When the elongation was less than 150%, TENG exhibited excellent linear characteristics in the resistance-tensile strain correspondence, and the coefficient of determination was 0.99. This stretchable TENG with a sufficient contact area of 9 cm2 could generate a short-circuit current of 2 µA when it was in contact with the skin. Lastly, an intelligent tension monitoring wearable device that can effectively measure the tensile force was developed. Such a stretchable, coplanar integration-based, and low-cost wearable device has excellent applicability in wearable electronics.

Wheat stem (or black) rust, caused by Puccinia graminis f. sp. tritici (Pgt), has been historically among the most devastating global fungal diseases of wheat. The recent occurrence and spread of new virulent races such as Ug99 have prompted global efforts to identify and isolate more effective stem rust resistance (Sr) genes. Here, we report the map-based cloning of the Ug99-effective SrTm5 gene from diploid wheat Triticum monococcum accession PI 306540 that encodes a typical coiled-coil nucleotide-binding leucine-rich repeat protein. This gene, designated as Sr22b, is a new allele of Sr22 with a rare insertion of a large (13.8-kb) retrotransposon into its second intron. Biolistic transformation of an ~112-kb circular bacterial artificial chromosome plasmid carrying Sr22b into the susceptible wheat variety Fielder was sufficient to confer resistance to stem rust. In a survey of 168 wheat genotypes, Sr22b was present only in cultivated T. monococcum subsp. monococcum accessions but absent in all tested tetraploid and hexaploid wheat lines. We developed a diagnostic molecular marker for Sr22b and successfully introgressed a T. monococcum chromosome segment containing this gene into hexaploid wheat to accelerate its deployment and pyramiding with other Sr genes in wheat breeding programmes. Sr22b can be a valuable component of gene pyramids or transgenic cassettes combining different resistance genes to control this devastating disease.

Photothermal therapy (PTT) has inherent advantages in the treatment of hypoxic tumors due to its optically controlled selectivity on tumor ablation and oxygen-independent nature. The subcellular organelle-targeting capability and photothermal conversion efficiency (PCE) at near-infrared (NIR) wavelength are the key parameters in the assessment of the photothermal agent (PTA). Here, we report that carbon dots (CDs) prepared by the hydrothermal treatment of coronene derivatives show a high PCE of 54.7% at 808 nm, which can be attributed to the narrow band gap and the presence of amounts of continuous energy bands on CDs. Moreover, the vibrations in the layered graphite structures of the CDs also increase the rate of nonradiative transition and thus enhance the PCE. Furthermore, the CDs also possess excellent photostability, biocompatibility, and cell penetration capability and could mainly accumulate in the lysosomes. These experiment results have proved that the CDs are suitable as an efficient NIR light-triggered PTA for efficient PTT against cancer.

Owing to the storage and transportation problems of hydrogen fuel, exploring new methods of the real-time hydrogen production from ammonia becomes attractive. In this paper, non-thermal arc plasma (NTAP) combining with NiO/Al2O3 catalyst is developed to produce hydrogen from ammonia with high efficiency and large scale. The effects of ammonia gas flow rate and discharge power on the gas temperature, electron density, the hydrogen production rate, and energy efficiency were investigated. Experimental results show that the optical emission spectrum of NTAP working with pure ammonia medium was dominated by the atom spectrum of H α , H β , and molecular spectrum of NH component. Under the optimum experimental condition of plasma discharge, the highest energy efficiency of hydrogen production reached 783.4 L/kW ⋅ h at NH3 gas flow rate of 30 SLM. When the catalyst was added, and heated by the NTAP simultaneously, the energy efficiency further increased to 1080.0 L/kW ⋅ h.

Triacsins are an intriguing class of specialized metabolites possessing a conserved N-hydroxytriazene moiety not found in any other known natural products. Triacsins are notable as potent acyl-CoA synthetase inhibitors in lipid metabolism, yet their biosynthesis has remained elusive. Through extensive mutagenesis and biochemical studies, we here report all enzymes required to construct and install the N-hydroxytriazene pharmacophore of triacsins. Two distinct ATP-dependent enzymes were revealed to catalyze the two consecutive N–N bond formation reactions, including a glycine-utilizing, hydrazine-forming enzyme (Tri28) and a nitrite-utilizing, N-nitrosating enzyme (Tri17). This study paves the way for future mechanistic interrogation and biocatalytic application of enzymes for N–N bond formation. During the biosynthesis of triacsin, the two N–N bond formation reactions necessary to create the unique N-hydroxytriazene moiety are catalyzed by a glycine-utilizing hydrazine-forming enzyme and a nitrite-utilizing N-nitrosating enzyme.

Non-noble-metal-based electrocatalysts with superior oxygen reduction reaction (ORR) activity to platinum (Pt) are highly desirable but their fabrications are challenging and thus impeding their applications in metal-air batteries and fuel cells. Here, we report a facile molten salt assisted two-step pyrolysis strategy to construct carbon nanosheets matrix with uniformly dispersed Fe3N/Fe nanoparticles and abundant nitrogen-coordinated Fe single atom moieties (Fe@FeSA-N-C). Thermal exfoliation and etching effect of molten salt contribute to the formation of carbon nanosheets with high porosity, large surface area and abundant uniformly immobilized active sites. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) image, X-ray absorption fine spectroscopy, and X-ray photoelectron spectroscopy indicate the generation of Fe (mainly Fe3N/Fe) and FeSA-N-C moieties, which account for the catalytic activity for ORR. Further study on modulating the crystal structure and composition of Fe3N/Fe nanoparticles reveals that proper chemical environment of Fe in Fe3N/Fe notably optimizes the ORR activity. Consequently, the presence of abundant FeSA-N-C moieties, and potential synergies of Fe3N/Fe nanoparticles and carbon shells, markedly promote the reaction kinetics. The as-developed Fe@FeSA-N-C-900 electrocatalyst displays superior ORR performance with a half-wave potential (E1/2) of 0.83 V versus reversible hydrogen electrode (RHE) and a diffusion limited current density of 5.6 mA cm−2. In addition, a rechargeable Zn-air battery device assembled by the Fe@FeSA-N-C-900 possesses remarkably stable performance with a small voltage gap without obvious voltage loss after 500 h of operation. The facile synthesis strategy for the high-performance composites represents another viable avenue to stable and low-cost electrocatalysts for ORR catalysis.

The design and synthesis of single-molecule amphiphilic and multifunctional phototherapeutic agents are important to cancer diagnosis and therapy. In this work, we developed three amphiphilic diketopyrrolopyrrole derivatives (TPADPP, DTPADPP, and TPADDPP) with different donor–acceptor structures and poly(ethylene glycol) side chains. The corresponding nanoparticles (NPs) were obtained via a self-assembly from three amphiphilic DPP derivatives and used as smart phototherapeutic agents for tumor diagnosis and treatment. The three amphiphilic DPP NPs exhibited near-infrared (NIR) emissions and good biocompatibility. Thus, they could be used as fluorescence (FL) imaging agents for guided therapy. DTPADPP NPs and TPADDPP NPs also displayed excellent photothermal performance and high accumulation in the tumor. Owing to these beneficial features, the DTPADPP NPs and TPADDPP NPs synthesized herein are suitable for NIR FL imaging and effective photothermal therapy against the tumor in vivo.

Fluostatins belong to the atypical angucyclinone aromatic polyketides featuring a distinctive tetracyclic benzo[a]fluorene skeleton. To understand the formation of the heavily oxidized A-ring in fluostatins, a flavin adenine dinucleotide-binding oxidoreductase-encoding gene flsP was inactivated, leading to the production of an unprecedented 1,4-oxazepine-linked seco-fluostatin heterodimer difluostatin I (7) and five new fluostatin-related derivatives, fluostatins T-X (8-12). Their structures were elucidated by mass spectrometry, nuclear magnetic resonance, X-ray diffraction analysis, and biosynthetic considerations. Difluostatin I (7) represents the first example with an A-ring-cleaved 3',4'-seco-fluostatin skeleton. The absolute configuration of fluostatin T (8) was determined by X-ray diffraction analysis. Fluostatin W (11) contains an uncommon isoxazolinone ring. These findings highlight the structural diversity of fluostatins.

A novel mass spectrometric method for probing the flash chemistry of electrogenerated reactive intermediates was developed based on rapid collision mixing of electrosprayed microdroplets by using a theta-glass capillary. The two individual microchannels of the theta-glass capillary are asymmetrically or symmetrically fabricated with a carbon bipolar electrode to produce intermediates in situ . Microdroplets containing the newly formed intermediates collide with those of the invoked reactants at sub-10 microsecond level, making it a powerful tool for exploring their ultrafast initial transformations. As a proof-of-concept, we present the identification of the key radical cation intermediate in the oxidative dimerization of 8-methyl-1,2,3,4-tetrahydroquinoline and also the first revealment of previously hidden nitrenium ion involved reaction pathway in the C-H/N-H cross-coupling between N,N'-dimethylaniline and phenothiazine.

Owing to the high theoretical capacity, metal sulfides have emerged as promising anode materials for potassium-ion batteries (PIBs). However, sluggish kinetics, drastic volume expansion, and polysulfide dissolution during charge/discharge result in unsatisfactory electrochemical performance. Herein, we design a core-shell structure consisting of an active bismuth sulfide core and a highly conductive sulfur-doped carbon shell (Bi2S3@SC) as a novel anode material for PIBs. Benefiting from its unique core-shell structure, this Bi2S3@SC is endowed with outstanding potassium storage performance with high specific capacity (626 mAh·g−1 under 50 mA·g−1) and excellent rate capability (268.9 mAh·g−1 at 1 A·g−1). More importantly, a Bi2S3@SC//KFe[Fe(CN)6] full cell is successfully fabricated, which achieves a high reversible capacity of 257 mAh·g−1 at 50 mA·g−1 over 50 cycles, holding great potentials in practical applications. Density functional theory (DFT) calculations reveal that potassium ions have a low diffusion barrier of 0.54 eV in Bi2S3 due to the weak van der Waals interactions between layers. This work heralds a promising strategy in the structural design of high-performance anode materials for PIBs.

Abnormal expression of Tau protein can cause the development of Alzheimer's disease (AD). So far, much evidence has demonstrated that Tau has multiple isoforms. These isoforms are suggested to have distinct physiological roles and contribute unequally to the progress of AD. Thus, detection of individual Tau isoforms may be helpful to better understand the link between clinical outcome and Tau status and to further improve AD diagnosis and treatment. However, few studies have been conducted on absolute quantification of Tau isoforms, probably due to high sequence homology and also low abundance of these isoforms in biofluids such as cerebrospinal fluid (CSF). Therefore, mass spectrometry-based targeted proteomics was attempted here. This targeted proteomics approach can principally measure a protein of interest at the surrogate peptide level, yet little has been done to detect protein isoforms, probably due to lack of isoform-specific surrogate peptides in mass spectrometry. In this study, separations in more dimensions were added, including immunoprecipitation (IP) and sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) for sample pretreatment and systems of linear equations for post-lab data extraction. Moreover, the reliability of the approach including IP enrichment, gel separation, and linear algebra algorithms was discussed. As a result, each isoform of Tau protein can be individually detected and quantified. Using IP enrichment, ∼250-fold enhancement of sensitivity was achieved. The ultimate LOQ was 0.50 nM. Finally, this multidimensional mass spectrometry-based targeted proteomics assay was validated and applied to simultaneous quantitative analysis of six Tau isoforms in CSF of AD patients.

The development of graphene oxide/rare earth complexes luminescent materials is limited due to the strong quenching ability of graphene oxide. However, the hybrid materials with pyromellitic acid (PMA) as ligand not only have better performance, but also have stronger luminescence intensity. Herein we tested the effect of the carboxylic acid structure of PMA on the luminescence intensity of graphene oxide/rare earth complexes hybrid materials. Phthalic acid (PA), Isophthalic acid (i-PA) and Terephthalic acid (p-PA) are selected as test ligand, representing the o-position, meta-position and para-position effects of PMA. By comparing the luminescence intensity, we found that o-position effect is helpful for the ligand to sensitize rare earth ions, and meta-position and para-position effects are helpful for the graphene oxide sheets (GOSs) to improve the luminescence intensity of hybrid materials and inhibit the quenching effect of the GOSs. Furthermore, we speculate on the relationship between the distance of π-π stacking of GOSs and rare earth complexes and luminescence intensity of hybrid materials. This work provides an important reference for the design of graphene oxide/rare-earth aromatic carboxylic acid hybrid luminescent materials.

Electrocatalytic CO2 reduction reaction is regarded as an intriguing route for producing renewable chemicals and fuels, but its development is limited by the lack of highly efficient and stable electrocatalysts. Herein, we propose the pipet-like bismuth (Bi) nanorods semifilled in nitrogen-doped carbon nanotubes (Bi-NRs@NCNTs) for highly selective electrocatalytic CO2 reduction. Benefited from the prominent capillary and confinement effects, the Bi-NRs@NCNTs act as nanoscale conveyors that can significantly facilitate the mass transport, adsorption,and concentration of reactants onto the active sites, realizing rapid reaction kinetics and low cathodic polarization. The spatial encapsulation and separation by the NCNT shells prevents the self-aggregation and surface oxidation of Bi-NRs, increasing the dispersity and stability of the electrocatalyst. As a result, the Bi-NRs@NCNTs exhibit high activity and durable catalytic stability for CO2-to-formate conversion over a wide potential range. The Faradaic efficiency for formate production reaches 90.9% at a moderate applied potential of -0.9 V vs reversible hydrogen electrode (RHE).

Two polycyclic thioalkaloides dassonmycins A (1) and B (2) were isolated from Nocardiopsis dassonvillei SCSIO 40065 associated with marine sponge Petrosia sp. Structures of 1 and 2 were elucidated by comprehensive spectroscopic analysis and confirmed by single-crystal X-ray diffraction experiments, to have a 6/6/6/6-fused tetracyclic ring featuring a naphthoquinone[2,3-e]piperazine[1,2-c]thiomorpholine scaffold. Compound 2 formed a caged core through an additional ether bridge. Both compounds exhibited moderate antibacterial and cytotoxic activities.

Intracellular membrane-bound vesicles play important roles in the formation of biominerals, such as calcium oxalate monohydrate (COM) crystals, through the interactions of the vesicles and differen...

Cariogenic Streptococcus mutans is known as a predominant etiological agent of dental caries due to its exceptional capacity to form biofilms. From strains of S. mutans isolated from dental plaque, we discovered, in the present study, a polyketide/nonribosomal peptide biosynthetic gene cluster, muf, which directly correlates with a strong biofilm-forming capability. We then identified the muf-associated bioactive product, mutanofactin-697, which contains a new molecular scaffold, along with its biosynthetic logic. Further mode-of-action studies revealed that mutanofactin-697 binds to S. mutans cells and also extracellular DNA, increases bacterial hydrophobicity, and promotes bacterial adhesion and subsequent biofilm formation. Our findings provided an example of a microbial secondary metabolite promoting biofilm formation via a physicochemical approach, highlighting the importance of secondary metabolism in mediating critical processes related to the development of dental caries. The mutanofactin family of lipopeptide natural products, produced by strains of cariogenic Streptococcus mutans, promotes biofilm formation via increased cell-surface hydrophobicity and binding to extracellular DNA.

Catalytic oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) have garnered great attention as the key character in metal-air batteries. Herein, we developed a superior nonprecious bifunctional oxygen electrocatalyst, fabricated through spatial confinement of Fe/Fe3C nanocrystals in pyridinic N and Fe-Nx rich carbon nanotubes (Fe/Fe3C-N-CNTs). During ORR, the resultant electrocatalyst exhibits positive onset potential of 1.0 V (vs. RHE), large half-wave potentials of 0.88 V (vs. RHE), which is more positive than Pt/C (0.98 V and 0.83 V, respectively). Remarkably, Fe/Fe3C-N-CNTs exhibits outstanding durability and great methanol tolerance, exceeding Pt/C and most reported nonprecious metal-based oxygen reduction electrocatalysts. Moreover, Fe/Fe3C-N-CNTs show a markedly low potential at j =10 mA/cm2, small Tafel slopes and extremely high stability for OER. Impressively, the Fe/Fe3C-N-CNTs-based Zn-air batteries demonstrate high power density of 183 mW/cm2 and robust charge/discharge stability. It is revealed that the spatial confinement effect can impede the aggregation and corrosion of Fe/Fe3C nanocrystals. Meanwhile, Fe/Fe3C and Fe-Nx play synergistic effect on boosting the ORR/OER activity, which provides an important guideline for construction of inexpensive nonprecious metal-carbon hybrid nanomaterials.

Inactivation of the flavoenzyme-encoding gene flsO1 in fluostatin biosynthesis led to the isolation of four new angucyclinone derivatives (11, 12, 14, and 15), among which fluostarenes A (14) and B (15) featured the unprecedented 6/6/5/6/6 pentacyclic skeleton with fusion of a benzo[b]fluorene and a six-membered lactone ring. Both 14 and 15 were putatively generated via quinone methide-mediated nonenzymatic reactions. Fluostarene B (15) exhibited cytotoxicity against several cancer cell lines with IC50 values ranging from 7 to 10 μM. Fluostarenes A (14), B (15), and PK1 (16) showed α-glucosidase inhibition activity with IC50 of 0.89, 1.58, and 0.13 μM, respectively. Successful complementation of the ΔflsO1 mutant with alpK from kinamycin biosynthesis suggests that FlsO1 should function equivalently to AlpK as a putative C-5 hydroxylase.

This paper presents a simple method to prepare carbon-coated spinel nickel–cobalt–sulfide metal hollow spheres with excellent electrochemical properties, which can be considered as promising materials for supercapacitors. A type of Ni–Co coordination polymer sphere is identified as a precursor metal template as well; the prepared coordination polymer precursor sphere is vulcanized to obtain the NiCo2S4 hollow metal sphere. After that, glucose modified on the surface of the hollow metal sphere is the source of carbon. After hydrothermal sulfuration treatment the carbon-coated NiCo2S4 hybrid material is obtained, which is sintered in a tube furnace to improve the crystallinity of the materials. The compound materials reveal advanced specific capacitance (1367 F g−1 at 1 A g−1) and advantageous cycling stability (approximately 89.2% maintained after 6000 cycles at 10 A g−1).

Nanoplastics are widely distributed in crop soils and can interact with other exposed organic contaminants such as pesticides, leading to enhanced toxicity to plants and soil-beneficial microorganisms. These combined organic pollutants can also interact physiochemically with mineral matrices, becoming selectively preserved and occluded. Inclusion organics within growing minerals and the pore spaces of mineral aggregates are potentially inaccessible to plant root cells and soil microorganisms due to the limitation of their movement, but the microscopic mechanisms that control occlusion processes in the presence of nanoplastics mixed with pesticides remain poorly understood. Here, we use time-resolved atomic force microscopy (AFM) to observe how model soil minerals interact in situ with different functional groups of polystyrene (PSFG) mixed with glyphosate (PMG). Our results show that the PSFG–PMG complexes are occluded within calcite and iron hydroxide particles through hillock growth and aggregation, respectively. The free energies of binding between the functional groups of polystyrene and calcite surfaces measured using AFM-based dynamic force spectroscopy in the presence of different concentrations of PMG account for the molecular interactions involved in the occlusion process and the effects of the PMG concentration. These in situ nanoscale observations and molecular-scale energetic measurements in a simple model system may provide insights into the immobilization of both nanoplastics and pesticides by soil minerals, with potential implications relating to multiple pollutant sequestration.

Purpose To examine the ablation zone, muscle contractions, and temperature increases in both rabbit liver and kidney models in vivo for a custom-made high-frequency irreversible electroporation (H-FIRE) generator. Materials and Methods A total of 18 New Zealand white rabbits were used to investigate five H-FIRE protocols (n = 3 for each protocol) and an IRE protocol (n = 3) for the performance of the designed H-FIRE device in both liver and kidney tissues. The ablation zone was determined by using histological analysis 72 h after treatment. The extent of muscle contractions and temperature change during the application of pulse energy were measured by a commercial accelerometer attached to animals and fiber optic temperature probe inserted into organs with IRE electrodes, respectively. Results All H-FIRE protocols were able to generate visible ablation zones without muscle contractions, for both liver and kidney tissues. The area of ablation zone generated in H-FIRE pulse protocols (e.g., 0.3–1 μs, 2000 V, and 90–195 bursts) appears similar to that of IRE protocol (100 μs, 1000 V, and 90 pulses) in both liver and kidney tissues. No significant temperature increase was noticed except for the protocol with the highest pulse energy (e.g., 1 μs, 2000 V, and 180 bursts). Conclusion Our work serves to complement the current H-FIRE pulse waveforms, which can be optimized to significantly improve the quality of ablation zone in terms of precision for liver and kidney tumors in clinical setting.

A water-soluble Eu(III) hybrid composite based-on DPA and Phen as ligands, graphene oxide sheets (GOSs) as inorganic matrix, and Eu3+ as luminescence center has been synthesized, namely, Eu–DPA–Phen/GOSs. Compared with single Eu(III) complexes named Eu–DPA–Phen, Eu–DPA–Phen/GOSs not only retains the high luminescence intensity but also shows better solubility, higher stability, and longer fluorescence lifetime. It can be used as a fluorescent probe to detect Cu2+ ions in liquid medium and mixed with polyvinyl alcohol (PVA) to produce a self-supporting film with high luminescence intensity, good stability, mechanical properties. This film is also sensitive to Cu2+ ions and convenient to carry. Thus, it has a great potential in the field of flexible and foldable luminescent devices and fluorescence sensing.

As one of the most ubiquitous biominerals, calcium oxalate (CaOx) exhibits different hydrate phases. Although the monohydrate (whewellite, COM) is the thermodynamically favorable phase at ambient temperatures, the metastable dihydrate (weddellite, COD) can still stably exist in pathological mineralization but the stabilization mechanisms remain unclear. Herein, the in situ phase transformation of nano-sized COD to COM in the presence of citrate (CA) and zinc ions (Zn2+) as stabilizers was observed by time-resolved atomic force microscopy (AFM) and Raman spectroscopy. By a combination of zeta potential measurement, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS), we demonstrate that CA can form a protective layer on the surface of nano-sized COD crystals to inhibit aggregation and delay the phase transformation of COD to COM. Due to the stabilizing/destabilizing effect of CA on the specific faces of COD, atypical-shaped COD crystals form. In addition, Zn2+ can substitute Ca2+ sites within the COD unit cell, shrinking the COD structure by compressing the “zeolite-like” channels to reduce weakly-bonded interchannel H2O molecules. This generates relatively smaller and more stable COD crystals with a typical pyramid shape to further retard COM formation. The obtained results provide new insights into modulating the stability of the metastable CaOx phases for potential control over pathological mineralization.

BaGdF5:Yb,Er/Tm materials with dual-mode luminescence were synthesized using oleic acid and a simple one-pot hydrothermal method. The as-obtained materials show different colors under different excitation light wavelengths, showing red, green and blue up-conversion luminescence under irradiation with a 980 nm laser, and blue down-conversion luminescence when excited at 324 nm. The blue down-conversion color might originate from the defects or electron centers produced by the oleic acid molecules adsorbed on the material's surface. BaGdF5:Yb,Er/Tm materials are used to prepare fluorescent ink, and a series of patterns obtained by screen printing can display different colors under different ambient light wavelengths. This work provides simple and promising fluorescent materials for anti-counterfeiting applications.

The development of advanced luminescent materials with simple synthesis and a high safety factor is still a great challenge for anti-counterfeiting applications. Herein, multi-mode emission NaYF4:Ln (Ln = Er/Tm, Yb/Er, Yb/Tm)/NaYF4:Ce,Mn composites were synthesized by employing a hydrothermal method. These materials show an excitation source-dependent color change, and could show red, green and blue up-conversion (UC) luminescence under the irradiation of a 980 nm laser and exhibit green and blue down-conversion (DC) luminescence at 254 nm and 365 nm, respectively. The energy transfer mechanism of the UC and DC luminescence of the samples was discussed in detail. Moreover, the composite materials were further fabricated into fluorescent anti-counterfeit inks, and various multi-mode fluorescent patterns were created by screen printing technology. This work provides a simple and promising material with outstanding fluorescence properties for security and anti-counterfeiting applications.

Metal–organic frameworks (MOFs) are a platform with multiple luminescent centers resulting from the multifaceted nature of their structure. Herein, via a facile postsynthetic modification method ap...

Both clinical observations and in vitro studies have confirmed that hyperoxaluria or hypercalciuria is one of the main factors that determine the phase formation of pathological calcium oxalate (Ca...

Epoxide hydrolases (EHs) have been characterized and engineered as biocatalysts that convert epoxides to valuable chiral vicinal diol precursors of drugs and bioactive compounds. Nonetheless, the regioselectivity control of the epoxide ring opening by EHs remains challenging. Alp1U is an α/β-fold EH that exhibits poor regioselectivity in the epoxide hydrolysis of fluostatin C (compound 1) and produces a pair of stereoisomers. Herein, we established the absolute configuration of the two stereoisomeric products and determined the crystal structure of Alp1U. A Trp-186/Trp-187/Tyr-247 oxirane oxygen hole was identified in Alp1U that replaced the canonical Tyr/Tyr pair in α/β-EHs. Mutation of residues in the atypical oxirane oxygen hole of Alp1U improved the regioselectivity for epoxide hydrolysis on 1. The single site Y247F mutation led to highly regioselective (98%) attack at C-3 of 1, whereas the double mutation W187F/Y247F resulted in regioselective (94%) nucleophilic attack at C-2. Furthermore, single-crystal X-ray structures of the two regioselective Alp1U variants in complex with 1 were determined. These findings allowed insights into the reaction details of Alp1U and provided a new approach for engineering regioselective epoxide hydrolases.

Alginate or chitosan microparticles as drug loading system performed pH-responsiveness and biocompatibility, yet with the burst-release and limited encapsulation. In order to improve the performance, herein, Pickering emulsion of chitosan-hydrophobic alginate nanocomposite (HSA-CS NCs) as the bio-stabilizer, was proposed as the drug-loading vehicle. Integrating the merits of HSA-CS and Pickering emulsion, such drug carrier of emulsion performed pH-response and biocompatibility from HSA-CS, and high loading capacity and rigid layer from Pickering emulsion, so as for the manipulated release behavior. With thorough investigation, via the various pH-response of HSA-CS nanocomposite in the continuous simulated gastrointestinal fluid, Pickering emulsion gradually released the loading drug (ibuprofen) out, performing the pH-triggered controlled-release behavior. Ibuprofen-loaded Pickering emulsions (30 mg/mL) released nearly none in SGF for 3 h, whereas in SIF, performed constant release in initial 5 h and continuous-release of 88.37% ibuprofen in 24 h with no drug-burst and high loading capacity, promisingly as the pH-responsive vehicle for drug delivery in oral route.

Transition metal (TM)-based bimetallic spinel oxides can efficiently activate peroxymonosulfate (PMS) presumably attributed to enhanced electron transfer between TMs, but the existing model cannot fully explain the efficient TM redox cycling. Here, we discover a critical role of TM-O covalency in governing the intrinsic catalytic activity of Co3-x Mnx O4 spinel oxides. Experimental and theoretical analysis reveals that the Co sites significantly raises the Mn valence and enlarges Mn-O covalency in octahedral configuration, thereby lowering the charge transfer energy to favor MnOh -PMS interaction. With appropriate MnIV /MnIII ratio to balance PMS adsorption and MnIV reduction, the Co1.1 Mn1.9 O4 exhibits remarkable catalytic activities for PMS activation and pollutant degradation, outperforming all the reported TM spinel oxides. The improved understandings on the origins of spinel oxides activity for PMS activation may inspire the development of more active and robust metal oxide catalysts.

Hypocrellin B (HB) derived from naturally produced hypocrellins has attracted considerable attention in photodynamic therapy (PDT) because of its excellent photosensitive properties. However, the weak absorption within a "phototherapy window" (600-900 nm) and poor water solubility of HB have limited its clinical application. In this study, two HB derivatives (i. e., HE and HF) were designed and synthesized for the first time by introducing two different substituent groups into the HB structure. The obtained derivatives showed a broad absorption band covering the near-infrared (NIR) region, NIR emission (peaked at 805 nm), and singlet oxygen quantum yields of 0.27/0.31. HE-PEG-NPs were also prepared using 2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethyleneglycol)-2000] (DSPE-mPEG2000) to achieve excellent dispersion in water and further explored their practical applications. HE-PEG-NPs not only retained their 1 O2 -generating ability, but also exhibited a photothermal conversion efficiency of 25.9%. In vitro and in vivo therapeutic results revealed that the synergetic effect of HE-PEG-NPs on PDT and photothermal therapy (PTT) could achieve a good performance. Therefore, HE-PEG-NPs could be regarded as a promising phototheranostic agent.

Angucyclinces belong to the class of aromatic polyketides and display a wide variety of structure diversity and pharmaceutical significance. Herein we report the isolation, structure elucidation, and bioactivity evaluation of structure-diversified angucyclinone derivatives and anthracene from the South China Sea-derived Micromonospora echinospora SCSIO 04089, including a thioether, gephysulfuromycin (1), two new benzo[b]phenanthridines, homophenanthroviridone (2) and homophenanthridonamide (3), a new benzo[b]fluorene, homostealthin D (4), a new naphtho[2,3-b]benzofuran, nenesfuran (5), a new naphthoquinone, WS-5995 D (6) and a new anthracene, nenesophanol (7), together with three known compounds (8-10). Their structures were elucidated by extensive spectroscopic analyses. The structures of 1-3 and 5-8 were confirmed by X-ray crystallographic analyses. Gephysulfuromycin (1) featured a rare single S-bridged 3,12a-epithiotetraphene skeleton. Homophenanthroviridone (2) was found to be cytotoxic to SF-268, MCF-7, and HepG2 cell lines with IC50 values of 5.4 ± 0.4, 6.8 ± 0.3, and 1.4 ± 0.1 μM, respectively. Compound 2 was also active against Gram-positive bacteria with MIC (minimal inhibition concentration) values ranging 2-4 μg mL-1.

With a half filled d-electron shell, molybdenum (Mo) plays an important role as catalysts in the petrochemical industry. However, Mo is generally regarded as not catalytically active for oxygen reduction reaction (ORR) compared with other transition metals such as Fe and Co. Inspired by molybdoenzymes, herein, we successfully endow Mo single-atom catalyst with highly ORR catalytic activity though engineering the coordination environment. This unique Mo single-atom catalyst consists of oxygen and nitrogen dual-component coordinated central Mo atom anchored on porous carbon (Mo-O/N-C), showing prominent ORR catalytic performance compared to the state-of-the-art Pt/C under alkaline condition. The extraordinary performance of Mo-O/N-C electrocatalyst is also demonstrated in Zn-air batteries as an air cathode. Density functional theory (DFT) calculations reveal the oxygen and nitrogen dual-component coordination could tailor the d-band center of Mo, subsequently optimizing its binding capability with reaction intermediates (O*, OH* and OOH*), hence accelerating overall ORR process. This work not only provides an efficient and commercially competitive ORR catalyst, but advancing further development of other electrocatalysts through engineering the coordination environment.