Search

Bacteriophage-encoded endolysins have been identified as antibacterial candidates. However, the development of endolysins as mainstream antibacterial agents first requires a comprehensive biochemical understanding. This study defines the atomic structure and enzymatic function of Escherichia coli O157:H7 phage FAHEc1 endolysin, LysF1. Bioinformatic analysis suggests this endolysin belongs to the T4 Lysozyme (T4L)-like family of proteins and contains a highly conserved catalytic triad. We then solved the structure of LysF1 with x-ray crystallography to 1.71 Å. LysF1 was confirmed to exist as a monomer in solution by sedimentation velocity experiments. The protein architecture of LysF1 is conserved between T4L and related endolysins. Comparative analysis with related endolysins shows that the spatial orientation of the catalytic triad is conserved, suggesting the catalytic mechanism of peptidoglycan degradation is the same as that of T4L. Differences in the sequence illustrate the role coevolution may have in the evolution of this fold. We also demonstrate that by mutating a single residue within the hydrophobic core, the thermal stability of LysF1 can be increased by 9.4 °C without compromising enzymatic activity. Overall, the characterization of LysF1 provides further insight into the T4L-like class of endolysins. Our study will help advance the development of related endolysins as antibacterial agents, as rational engineering will rely on understanding mutable positions within this protein fold.

Described in this thesis is the use of controlled radical polymerization techniques to synthesize tetrazine end-functionalized telechelic polymers, which were employed to generate T4 Lysozyme homodimers. A mutant of T4 Lysozyme (V131C), containing a single surface-exposed cysteine residue, was modified via Michael addition with a protein-reactive trans-cyclooctene. Reversible addition-fragmentation chain transfer (RAFT) polymerization was used to obtain telechelic poly(N-isopropylacrylamide) (pNIPAAm) polymers with Mn (1H-NMR) of 2.0 kDa and molecular weight dispersity, Đ, (GPC) of 1.05. pNIPAAm was modified at both ends with (4-(6- methyl-1,2,4,5-tetrazin-3-yl)phenyl)methanol. As a control, a 2.0 kDa bis-carboxylic acid poly(ethylene glycol) was modified at both ends with (4-(6-methyl-1,2,4,5-tetrazin-3- yl)phenyl)methanol and a 2.0 kDa bis-maleimide pNIPAAm was also synthesized. Tetrazine- functionalized polymers were then ligated to a trans-cyclooctene modified Lysozyme (T4L-TCO). Ligation of T4L-TCO to bis-tetrazine pNIPAAm resulted in 27.27% yield of the homodimeric conjugate, whereas bis-tetrazine PEG resulted in 16.75% and bis-maleimide pNIPAAm resulted in

Background: Pesticin is a protein toxin that is formed by Yersinia pestis to kill related strains. Results: The crystal structure and functional analyses revealed a receptor binding, a translocation, and an activity domain. Conclusion: Folding of the activity domain is very similar to folding of phage T4 lysozyme. Significance: This is the first case that an activity domain is derived from a known enzyme., Yersinia pestis produces and secretes a toxin named pesticin that kills related bacteria of the same niche. Uptake of the bacteriocin is required for activity in the periplasm leading to hydrolysis of peptidoglycan. To understand the uptake mechanism and to investigate the function of pesticin, we combined crystal structures of the wild type enzyme, active site mutants, and a chimera protein with in vivo and in vitro activity assays. Wild type pesticin comprises an elongated N-terminal translocation domain, the intermediate receptor binding domain, and a C-terminal activity domain with structural analogy to lysozyme homologs. The full-length protein is toxic to bacteria when taken up to the target site via the outer or the inner membrane. Uptake studies of deletion mutants in the translocation domain demonstrate their critical size for import. To further test the plasticity of pesticin during uptake into bacterial cells, the activity domain was replaced by T4 lysozyme. Surprisingly, this replacement resulted in an active chimera protein that is not inhibited by the immunity protein Pim. Activity of pesticin and the chimera protein was blocked through introduction of disulfide bonds, which suggests unfolding as the prerequisite to gain access to the periplasm. Pesticin, a muramidase, was characterized by active site mutations demonstrating a similar but not identical residue pattern in comparison with T4 lysozyme.

Conformational change in protein–ligand complexes is widely modeled, but the protein accommodation expected on binding a congeneric series of ligands has received less attention. Given their use in medicinal chemistry, there are surprisingly few substantial series of congeneric ligand complexes in the Protein Data Bank (PDB). Here we determine the structures of eight alkyl benzenes, in single-methylene increases from benzene to n-hexylbenzene, bound to an enclosed cavity in T4 lysozyme. The volume of the apo cavity suffices to accommodate benzene but, even with toluene, larger cavity conformations become observable in the electron density, and over the series two other major conformations are observed. These involve discrete changes in main-chain conformation, expanding the site; few continuous changes in the site are observed. In most structures, two discrete protein conformations are observed simultaneously, and energetic considerations suggest that these conformations are low in energy relative to the ground state. An analysis of 121 lysozyme cavity structures in the PDB finds that these three conformations dominate the previously determined structures, largely modeled in a single conformation. An investigation of the few congeneric series in the PDB suggests that discrete changes are common adaptations to a series of growing ligands. The discrete, but relatively few, conformational states observed here, and their energetic accessibility, may have implications for anticipating protein conformational change in ligand design.

Transverse relaxation dispersion NMR spectroscopy can provide atom-specific information about time scales, populations, and the extent of structural reorganization in proteins under equilibrium conditions. A method is described that uses side-chain methyl groups as local reporters for conformational transitions taking place in the microsecond regime. The experiment measures carbon nuclear spin relaxation rates in the presence of continuous wave off-resonance irradiation, in proteins uniformly enriched with C-13, and partially randomly labeled with 2 H. The method was applied to human FK-506 binding protein (FKBP12), which uses a common surface for binding substrates in its dual role as both an immunophilin and folding assistant. Conformational dynamics on a time scale of similar to 130 mu s were detected for methyl groups located in the substrate binding pocket, demonstrating its plasticity in the absence of substrate. The spatial arrangement of affected side-chain atoms suggests that substrate recognition involves the rapid relative movement of the subdomain comprising residues Ala81-Thr96 and that the observed dynamics play an important role in facilitating the interaction of this protein with its many partners, including calcineurin.

Pseudomonas aeruginosa bacteriophage phiKMV is a T7-like lytic phage. Liquid chromatography-mass spectrometry of the structural proteins revealed gene product 36 (gp36) as part of the phiKMV phage particle. The presence of a lysozyme domain in the C terminal of this protein (gp36C) was verified by turbidimetric assays on chloroform-treated P. aeruginosa PAO1 and Escherichia coli WK6 cells. The molecular mass (20,884 Da) and pI (6.4) of recombinant gp36C were determined, as were the optimal enzymatic conditions (pH 6.0 in 16.7 mM phosphate buffer) and activity (4800 U/mg). Recombinant gp36C is a highly thermostable lysozyme, retaining 26% of its activity after 2 h at 100degreesC and 21% after autoclaving. This thermostability could prove an interesting characteristic for food conservation technology. ispartof: Cellular and molecular life sciences vol:61 issue:21 pages:2753-2759 ispartof: location:Switzerland status: published

Lyric transglycosylases catalyze the cleavage of the beta-1,4-glycosidic bond between N-acetylmuramic acid (MurNAc) and N-acetylglucosamine (GlcNAc) in peptidoglycan with concomitant formation of a 1,6-anhydro bond in the MurNAc residue. To understand the reaction mechanism of Escherichia coli lytic transglycosylase Slt35, three crystal structures have been determined of Slt35 in complex with two different peptidoglycan fragments and with the lyric transglycosylase inhibitor bulgecin A. The complexes define four sugar-binding subsites (-2, -1, +1, and +2) and two peptide-binding sites in a large cleft close to Glu162. The Glu162 side chain is between the -1 and +1 sugar-binding sites, in agreement with a function as catalytic acid/base. The complexes suggest additional contributions to catalysis from Ser216 and Asn339, residues which are conserved among the MltB/Slt35 lytic transglycosylases.

Recent advances in single molecule manipulation methods offer a novel approach to investigating the protein folding problem. These studies usually are done on molecules that are naturally organized as linear arrays of globular domains. To extend these techniques to study proteins that normally exist as monomers, we have developed a method of synthesizing polymers of protein molecules in the solid state. By introducing cysteines at locations where bacteriophage T4 lysozyme molecules contact each other in a crystal and taking advantage of the alignment provided by the lattice, we have obtained polymers of defined polarity up to 25 molecules long that retain enzymatic activity. These polymers then were manipulated mechanically by using a modified scanning force microscope to characterize the force-induced reversible unfolding of the individual lysozyme molecules. This approach should be general and adaptable to many other proteins with known crystal structures. For T4 lysozyme, the force required to unfold the monomers was 64 ± 16 pN at the pulling speed used. Refolding occurred within 1 sec of relaxation with an efficiency close to 100%. Analysis of the force versus extension curves suggests that the mechanical unfolding transition follows a two-state model. The unfolding forces determined in 1 M guanidine hydrochloride indicate that in these conditions the activation barrier for unfolding is reduced by 2 kcal/mol.

With the use of a recently developed method, twenty-four proteins for which two or more X-ray conformers are known have been analyzed to reveal structural principles that govern domain motions in proteins. In all 24 cases, the domain motion is a rotation about a physical axis created through local interactions both covalent and noncovalent, In many cases, two or more mechanical hinges separated in space create a stable hinge axis for precise control of the domain closure. The terminal regions of alpha-helices and beta-sheets have been found to act as mechanical hinges in a significant number of cases. In some cases, the two terminal regions of neighboring strands of a single beta-sheet can create a hinge axis, as can the two termini of a single alpha-helix. These two structures have been termed the "double-hinged beta-sheet" and "double-hinged alpha-helix," respectively. A flexible loop that attaches one domain to another and through which the effective hinge axis passes is another construct that is used to create a hinge. Noncovalent interactions between segments remote along the polypeptide chain can also form hinges. In addition alpha-helices that preserve their hydrogen bonding structure when bent have been found to behave as mechanical hinges. It is suggested that these alpha-helices act as a store of elastic energy that drives the closing of domains for rapid capture of the substrate. If the repertoire of possible interdomain structures is as limited as this study suggests, the dynamic behavior of proteins could soon be predicted using bioinformatics techniques. Proteins 1999;36:425-435, (C) 1999 Wiley-Liss, Inc.

A method is presented to mathematically extract concerted structural transitions in proteins from collections of crystal structures. The ''essential dynamics'' procedure is used to filter out small-amplitude fluctuations from such a set of structures; the remaining large conformational changes describe motions such as those important for the uptake/release of substrate/ligand and in catalytic reactions. The method is applied to sets of x-ray structures for a number of proteins, and the results are compared with the results from essential dynamics as applied to molecular dynamics simulations of those proteins. A significant degree of similarity is found, thereby providing a direct experimental basis for the application of such simulations to the description of large concerted motions in proteins.

Site-directed mutagenesis was used to assess the contribution of individual residues and a bound calcium in the 55-69 region of the thermolysin-like protease of Bacillus stearothermophilus (TLP-ste) to thermal stability. The importance of the 55-69 region was reflected by finding that almost all mutations had drastic effects on stability. These effects (both stabilizing and destabilizing) were obtained by mutations affecting main chain flexibility, as well as by mutations affecting the interaction between the 55-69 region and the rest of the protease molecule. The calcium-dependency of stability could be largely abolished by mutating one of its ligands (Asp57 or Asp59). In the case of the Asp57-->Ser mutation, the accompanying loss in stability was modest compared with the effects of other destabilizing mutations or the effects of (combinations of) stabilizing mutations. The detailed knowledge of the stability-determining region of TLP-ste permits effective rational design of stabilizing mutations, which, presumably, are also useful for related TLP such as thermolysin. This is demonstrated by the successful design of a stabilizing salt bridge involving residues 65 and 11.

An alpha -> beta transition underlies the first step of disease causing amyloidogenesis in many proteins. In view of this, many studies have been carried out using peptide models to characterize these secondary structural transitions. In this paper we show that an insertion/duplication mutant 'L20' of bacteriophage T4 lysozyme (M. Sagermann, W. A. Baase and B. W. Matthews, Proc. Natl. Acad. Sci. U.S.A., 1999, 96, 6078) displays an alpha -> beta transition. We performed molecular dynamics (MD) simulation of L20, using the GROMACS package of programs and united atom GROMOS 53a6 force field for a time period of 600 ns at 300 K, in explicit water. Our MD simulation demonstrated that the transition occurs in a duplicated alpha-helical region inserted tandemly at the N-terminus of the 'parent' helix. We show that a C-terminal beta-sheet anchors the parent helix while the loosely held N-terminal loop in the duplicate region is vulnerable to solvent attack and thus undergoes an alpha -> beta transition. Main chain-solvent interactions were seen to stabilize the observed beta-structure. Thus L20 serves as a good protein model for characterization of alpha -> beta transition in a full length protein.

To study microsecond processes by relaxation dispersion NMR spectroscopy, low power deposition and short pulses are crucial and encourage the development of experiments that employ H-1 Carr-Purcell-Meiboom-Gill (CPMG) pulse trains. Herein, a method is described for the comprehensive study of microsecond to millisecond time scale dynamics of methyl groups in proteins, exploiting their high abundance and favorable relaxation properties. In our approach, protein samples are produced using [H-1, C-13]-D-glucose in similar to 100% D2O, which yields CHD2 methyl groups for alanine, valine, threonine, isoleucine, leucine, and methionine residues with high abundance, in an otherwise largely deuterated background. Methyl groups in such samples can be sequence-specifically assigned to near completion, using C-13 TOCSY NMR spectroscopy, as was recently demonstrated (Often, R.; et al. J. Am. Chem. Soc. 2010, 132, 2952-2960). In this Article, NMR pulse schemes are presented to measure H-1 CPMG relaxation dispersion profiles for CHD2 methyl groups, in a vein similar to that of backbone relaxation experiments. Because of the high deuteration level of methyl-bearing side chains, artifacts arising from proton scalar coupling during the CPMG pulse train are negligible, with the exception of Ile-delta 1 and Thr-gamma 2 methyl groups, and a pulse scheme is described to remove the artifacts for those residues. Strong C-13 scalar coupling effects, observed for several leucine residues, are removed by alternative biochemical and NMR approaches. The methodology is applied to the transcriptional activator NtrC(r), for which an inactive/active state transition was previously measured and the motions in the microsecond time range were estimated through a combination of backbone N-15 CPMG dispersion NMR spectroscopy and a collection of experiments to determine the exchange-free component to the transverse relaxation rate. Exchange contributions to the H-1 line width were detected for 21 methyl groups, and these probes were found to collectively report on a local structural rearrangement around the phosphorylation site, with a rate constant of (15.5 +/- 0.5) x 10(3) per second (i.e., tau(ex) = 64.7 +/- 1.9 mu s). The affected methyl groups indicate that, already before phosphorylation, a substantial, transient rearrangement takes place between helices 3 and 4 and strands 4 and 5. This conformational equilibrium allows the protein to gain access to the active, signaling state in the absence of covalent modification through a shift in a pre-existing dynamic equilibrium. Moreover, the conformational switching maps exactly to the regions that differ between the solution NMR structures of the fully inactive and active states. These results demonstrate that a cost-effective and quantitative study of protein methyl group dynamics by H-1 CPMG relaxation dispersion NMR spectroscopy is possible and can be applied to study functional motions on the microsecond time scale that cannot be accessed by backbone N-15 relaxation dispersion NMR. The use of methyl groups as dynamics probes extends such applications also to larger proteins.

The three-dimensional structures of proteins often show a modular architecture comprised of discrete structural regions or domains. Cooperative communication between these regions is important for catalysis, regulation and efficient folding; lack of coupling has been implicated in the formation of fibrils and other misfolding pathologies1. How different structural regions of a protein communicate and contribute to a protein’s overall energetics and folding, however, is still poorly understood. Here we use a single-molecule optical tweezers approach to induce the selective unfolding of particular regions of T4 lysozyme and monitor the effect on other regions not directly acted on by force. We investigate how the topological organization of a protein (the order of structural elements along the sequence) affects the coupling and folding cooperativity between its domains. To probe the status of the regions not directly subjected to force, we determine the free energy changes during mechanical unfolding using Crooks’ fluctuation theorem. We pull on topological variants (circular permutants) and find that the topological organization of the polypeptide chain critically determines the folding cooperativity between domains and thus what parts of the folding/unfolding landscape are explored. We speculate that proteins may have evolved to select certain topologies that increase coupling between regions to avoid areas of the landscape that lead to kinetic trapping and misfolding.

International audience ; Side-chain carboxyl and carbonyl groups play a major role in protein interactions and enzyme catalysis. A series of (13)C relaxation experiments is introduced to study the dynamics of carboxyl and carbonyl groups in protein side chains on both fast (sub-ns) and slower (micros-ms) time scales. This approach is illustrated on the protein calbindin D(9k). Fast dynamics features correlate with hydrogen- and ion-binding patterns. We also identify chemical dynamics on micros time scales in solvent-exposed carboxyl groups, most probably due to exchange between the carboxylate and carboxylic acid forms.

In the companion paper (J. Phys. Chem. B 2006, 110, jp0629487), a study of the conformational dynamics of methanethiosulfonate spin probes linked at a surface-exposed alpha-helix has been presented. Here, on the basis of this analysis, X-band ESR spectra of these spin labels are simulated within the framework of the Stochastic Liouville equation (SLE) methodology. Slow reorientations of the whole protein are superimposed on fast chain motions, which have been identified with conformational jumps and fluctuations in the minima of the chain torsional potential. Fast chain motions are introduced in the SLE for the protein reorientations through partially averaged magnetic tensors and relaxation times calculated according to the motional narrowing theory. The 72R1 and 72R2 mutants of T4 lysozyme, which bear the spin label at a solvent-exposed helix site, have been taken as test systems. For the side chain of the R2 spin label, only a few noninterconverting conformers are possible, whose mobility is limited to torsional fluctuations, yielding almost identical spectra, typical of slightly mobile nitroxides. In the case of R1, more complex spectra result from the simultaneous presence of constrained and mobile chain conformers, with relative weights that can depend on the local environment. The model provides an explanation for the experimentally observed dependence of the spectral line shapes on temperature, solvent, and pattern of substituents in the pyrroline ring. The relatively simple methodology presented here allows the introduction of realistic features of the spin probe dynamics into the simulation of ESR spectra of spin-labeled proteins; moreover, it provides suggestions for a proper account of such dynamics in more sophisticated approaches.

To investigate the structural and thermodynamic basis of the binding of solvent at internal sites within proteins a number of mutations were constructed in T4 lysozyme. Some of these were designed to introduce new solvent-binding sites. Others were intended to displace solvent from preexisting sites. In one case Val-149 was replaced with alanine, serine, cysteine, threonine, isoleucine, and glycine. Crystallographic analysis shows that, with the exception of isoleucine, each of these substitutions results in the binding of solvent at a polar site that is sterically blocked in the wild-type enzyme. Mutations designed to perturb or displace a solvent molecule present in the native enzyme included the replacement of Thr-152 with alanine, serine, cysteine, valine, and isoleucine. Although the solvent molecule was moved in some cases by up to 1.7 A, in no case was it completely removed from the folded protein. The results suggest that hydrogen bonds from the protein to bound solvent are energy neutral. The binding of solvent to internal sites within proteins also appears to be energy neutral except insofar as the bound solvent may prevent a loss of energy due to potential hydrogen bonding groups that would otherwise be unsatisfied. The introduction of a solvent-binding site appears to require not only a cavity to accommodate the water molecule but also the presence of polar groups to help satisfy its hydrogen-bonding potential. It may be easier to design a site to accommodate two or more water molecules rather than one as the solvent molecules can then hydrogen-bond to each other. For similar reasons it is often difficult to design a point mutation that will displace a single solvent molecule from the core of a protein.

The active site of thermolysin-like proteases (TLPs) is located at the bottom of a cleft between the N- and C-terminal domains. Crystallographic studies have shown that the active-site cleft is more closed in Ligand-binding TLPs than in Ligand-free TLPs. Accordingly, it has been proposed that TLPs undergo a hinge-bending motion during catalysis resulting in "closure" and "opening" of the active-site cleft. Two hinge regions have been proposed. One is located around a conserved glycine 78; the second involves residues 135 and 136. The importance of conserved glycine residues in these hinge regions was studied experimentally by analyzing the effects of Gly --> Ala mutations on catalytic activity. Eight such mutations were made in the TLP of Bacillus stearothermophilus (TLP-ste) and their effects on activity toward casein and various peptide substrates were determined. Only the Gly78Ala, Gly136Ala, and Gly135Ala + Gly136Ala mutants decreased catalytic activity significantly. These mutants displayed a reduction in k(cat)/K-m for 3-(2-furylacryloyl)-L-glycyl-L-leucine amide of 73%, 62%, and 96%, respectively. Comparisons of effects on k(cat)/K-m for various substrates with effects on the K-i for phosphoramidon suggested that the mutation at position 78 primarily had an effect on substrate binding, whereas the mutations at positions 135 and 136 primarily influence k(cat). The apparent importance of conserved glycine residues in proposed hinge-bending regions for TLP activity supports the idea that hinge-bending is an essential part of catalysis.

Several variants of T4 lysozyme have been identified that sequester small organic ligands in cavities or clefts. To evaluate potential binding sites for non-polar molecules, we screened a number of hydrophobic large-to-small mutants for stabilization in the presence of benzene. In addition to Leu99-->Ala, binding was indicated for at least five other mutants. Variants Met102-->Ala and Leu133-->Gly, and a crevice mutant, Phe104-->Ala, were further characterized using X-ray crystallography and thermal denaturation. As predicted from the shape of the cavity in the benzene complex, mutant Leu133-->Gly also bound p-xylene. We attempted to enlarge the cavity of the Met102-->Ala mutant into a deep crevice through an additional substitution, but the double mutant failed to bind ligands because an adjacent helix rearranged into a non-helical structure, apparently due to the loss of packing interactions. In general, the protein structure contracted slightly to reduce the volume of the void created by truncating substitutions and expanded upon binding the non-polar ligand, with shifts similar to those resulting from the mutations.A polar molecule binding site was also created by truncating Arg95 to alanine. This creates a highly complementary buried polar environment that can be utilized as a specific "receptor" for a guanidinium ion. Our results suggest that creating a deficiency through truncating mutations of buried residues generates "binding potential" for ligands with characteristics similar to the deleted side-chain. Analysis of complex and apo crystal structures of binding and non-binding mutants suggests that ligand size and shape as well as protein flexibility and complementarity are all determinants of binding. Binding at non-polar sites is governed by hydrophobicity and steric interactions and is relatively permissive. Binding at a polar site is more restrictive and requires extensive complementarity between the ligand and the site.

Haloalkane dehalogenase converts haloalkanes to their corresponding alcohols. The 3D structure, reaction mechanism and kinetic mechanism have been studied. The steady state k(cat) with 1,2-dichloroethane and 1,2-dibromoethane is limited mainly by the rate of release of the halide ion from the buried active-site cavity. During catalysis, the halogen that is cleaved off (Cl alpha) from 1,2-dichloroethane interacts with Trp125 and the Cl beta interacts with Phe172. Both these residues have van der Waals contacts with Val226. To establish the effect of these interactions on catalysis, and in an attempt to change enzyme activity without directly mutating residues involved in catalysis, we mutated Val226 to Gly, Ala and Leu. The Val226Ala and Val226Leu mutants had a 2.5-fold higher catalytic rate for 1,2-dibromoethane than the wild-type enzyme. A pre-steady state kinetic analysis of the Val226Ala mutant enzyme showed that the increase in k(cat) could be attributed to an increase in the rate of a conformational change that precedes halide release, causing a faster overall rate of halide dissociation. The k(cat) for 1,2-dichloroethane conversion was not elevated, although the rate of chloride release was also faster than in the wild-type enzyme. This was caused by a 3-fold decrease in the rate of formation of the alkyl-enzyme intermediate for 1,2-dichloroethane. Val226 seems to contribute to leaving group (Cl alpha or Br alpha) stabilization via Trp125, and can influence halide release and substrate binding via an interaction with Phe172. These studies indicate that wild-type haloalkane dehalogenase is optimized for 1,2-dichloroethane, although 1,2-dibromoethane is a better substrate.

The effects of engineered disulfide bonds on autodigestion and thermostability of Bacillus subtilis neutral protease (NP-sub) were studied using site-directed mutagenesis. After modelling studies two locations that might be capable of forming disulfide bonds, both near previously determined autodigestion sites in NP-sub, were selected for the introduction of cysteines. Analysis of mutant enzymes showed that disulfide bonds were indeed formed in vivo, and that the mutant enzymes were fully active. The introduced disulfides did not alter the autodigestion pattern of the NP-sub. All mutant NP-subs exhibited decreased thermostability, which, by using reducing agents, was shown to be caused by the introduction of the cysteines and not by the formation of the disulfides. Mutants containing one cysteine exhibited intermolecular disulfide formation at elevated temperatures, which, however, was shown not to be the cause of the decreased thermostability. Combining the present data with literature data, it would seem that the introduction of disulfide bridges is unsuitable for the stabilization of proteases. Possible explanations for this phenomenon are discussed.

Solid-phase methods have been used to synthesize LYS(1–13), a peptide corresponding to the first 13 residues of T4 lysozyme. 2D 1H NMR techniques were used to investigate its solution structure in the presence of SDS micelles. The identification of numerous medium-range NOESY crosspeaks and several slowly exchanging NH protons indicated the presence of an α-helical structure. This was confirmed by simulated annealing calculations performed using XPLOR.