Search

Developing synthetic materials able to mimic micro- and macrorheological properties of natural networks opens up to novel applications and concepts in materials science. The present contribution describes an active network based on a semi-synthetic polymer, a lactitol-bearing chitosan derivative (Chitlac), and a transient inorganic cross-linker, boric acid. Due to the many and diverse anchoring points for boric acid on the flanking groups of Chitlac, the cross-links constantly break and reform in a highly dynamic fashion. The consequence is a network with unusual non-equilibrium and mechanical properties closely resembling the rheological behavior of natural three-dimensional arrangements and of cytoskeleton. Concepts like network nucleation, reorganization and disassembly are declined in terms of amount of the cross-linker, which acts as a putative motor for remodeling of the network upon application of energy. The out-of-equilibrium and non-linear behavior render the semi-synthetic system of great interest for tissue engineering and for developing in-vitro mimics of natural active matrices.

The present paper explores the effect of boric acid on Chitlac, a lactose-modified chitosan which had previously shown interesting biological and physical-chemical features. The herewith-reported experimental evidences demonstrated that boric acid binds to Chitlac, producing conformational and association effects on the chitosan derivative. The thermodynamics of boric acid binding to Chitlac was explored by means of 11B NMR, circular dichroism (CD), and UV–vis spectroscopy, while macromolecular effects were investigated by means of viscometry and dynamic light scattering (DLS). The experimental results revealed a chain–chain association when limited amounts of boric acid were added to Chitlac. However, upon exceeding a critical boric acid limit dependent on the polysaccharide concentration, the soluble aggregates disentangle. The rheological behavior of Chitlac upon treatment with boric acid was explored showing a dilatant behavior in conditions of steady flow. An uncommonly high dependence in the scaling law between the zero-shear viscosity and the concentration of Chitlac was found, i.e., η0 ∝ CCTL5.8, pointing to interesting potential implications of the present system in biomaterials development.

An emerging strategy to improve adhesiveness of biomaterials in wet conditions takes inspiration from the adhesive features of marine mussel, which reside in the chemical reactivity of catechols. In this work, a catechol-bearing molecule (dopamine) was chemically grafted onto alginate to develop a polysaccharide-based membrane with improved adhesive properties. The dopamine-modified alginates were characterized by NMR, UV spectroscopy and in vitro biocompatibility. Mechanical tests and in vitro adhesion studies pointed out the effects of the grafted dopamine within the membranes. The release of HA from these resorbable membranes was shown to stimulate fibroblasts activities (in vitro). Finally, a preliminary in vivo test was performed to evaluate the adhesiveness of the membrane on porcine intestine (serosa). Overall, this functionalized membrane was shown to be biocompatible and to possess considerable adhesive properties owing to the presence of dopamine residues grafted on the alginate backbone. Statement of Significance This article describes the development of a mussels-inspired strategy for the development of an adhesive polysaccharide-based membrane for wound healing applications. Bioadhesion was achieved by grafting dopamine moieties on the structural component on the membrane (alginate): this novel biomaterial showed improved adhesiveness to the intestinal tissue, which was demonstrated by both in vitro and in vivo studies. Overall, this study points out how this nature-inspired strategy may be successfully exploited for the development of novel engineered biomaterials with enhanced bioadhesion, thus opening for novel applications in the field of general surgery.

Alginate-based membranes containing hyaluronic acid (HA) were manufactured by freeze-drying calcium-reticulated hydrogels. The study of the distribution of the two macromolecules within the hydrogel enabled to highlight a polymer demixing mechanism that tends to segregate HA in the external parts of the constructs. Resistance and pliability of the membranes were tuned, while release and degradation studies enabled to quantify the diffusion of both polysaccharides in physiological solution and to measure the viable lifetime of the membranes. Biological studies in vitro proved that the liquid extracts from the HA-containing membranes stimulate wound healing and that fibroblasts are able to colonize the membranes. Overall, such novel alginate-HA membranes represent a promising solution for several medical needs, in particular for wound treatment, giving the possibility to provide an in situ administration of HA from a resorbable device.

We report on a controlled process allowing for the gelation of a diol-rich chitosan-derivative named CTL (lactose-modified chitosan) in the presence of boric acid as the cross-linker. A two-step approach is described, namely (i) the mixing of CTL and boric acid at pH = 5, a condition where the inorganic component is mildly reactive; (ii) the addition of sodium bicarbonate (NaHCO3) as a trigger, allowing for the gradual and slow pH increase. The goal was to convert gradually the almost inert neutral boric acid into the much more reactive borate anion, the latter promoting the formation of borate esters with CTL diols. Gelling kinetics as well as mechanical behavior at small and large deformations was investigated by rheometry. CTL-boric acid gels behaved essentially as transient networks, hence continuously assembling and dissociating in a highly dynamic fashion. The present gelling mechanism preserves the strain-hardening behavior in the nonlinear region of stress-strain response, corroborating the already suggested potential applications of such gels as mimics of biological soft tissues.

The aim of the present contribution is twofold as it reports (i) on the role played by chitosan acetylation degree for the stability of nanoparticles (NPs) formed with hyaluronan and (ii) on the effect of the interaction of such NPs with immune cells. Chitosans with similar viscosity-average molecular weight, Mv, (i.e., 200 000) and different fractions of acetylated units (F A ) together with low-molecular-weight hyaluronan were chosen for developing a select library of formulations via electrostatic complex coacervation. The resulting NPs were analyzed in terms of size, polydispersity, surface charge, and stability in physiological-mimicked media by dynamic light scattering. Only medium acetylated chitosan (F A = 0.16) guaranteed the stability of NPs. To explore the effect of NPs interaction with immune cells, the release of proinflammatory cytokines and the reactive oxygen species production by human macrophages and neutrophils, respectively, were evaluated. Strikingly, a structure-function relationship emerged, showing that NPs made of chitosans with F A = 0.02, 0.25, 0.46, and 0.63 manifested a proinflammatory activity, linked to the instability of the system. Conversely, NPs made of chitosan with F A = 0.16 neither modified the functional response of macrophages nor that of neutrophils. Of note, such NPs were found to possess additional properties potentially advantageous in applications such as delivery of therapeutics to target inflamed sites: (i) they are devoid of cytotoxic effects, (ii) they avoid engulfment during the early stage of interaction with macrophages, and (iii) they are muco-adhesive, thereby providing for site-specificity and long-residence effects

A broad library of chitosans was produced varying the molecular weight and the fraction of acetylated units, FA. The produced chitosans were used for the formation of wall-to-wall cylindrical gels through a controlled external gelation using tripolyphosphate (TPP) as cross-linker. The resulting gels were analyzed by rheometry. Viscosity average degree of polymerization ( D P v ¯ ) > 152 was shown to be required for the formation of stable gels. Both gel stiffness and gel rupture strength were proportional to the molecular weight regardless of the applied deformation. Increasing acetylation produced a marked reduction of the shear modulus, but, in parallel, switched the networks from rigid and brittle to weak and elastic. Intriguingly, gels made of chitosan with FA = 0.37 displayed notable elasticity, i.e. up to 90% of applied strain falls into linear regime. These findings suggest that the frequency of glucosamine (D unit) and N-acetyl-glucosamine (A unit) contribute to a subtle structure-property relationship in chitosan-TPP gels.

Chronic non-healing wounds are a clinically important problem in terms of number of patients and costs. Wound dressings such as hydrogels, hydrocolloids, polyurethane films and foams are commonly used to manage these wounds since they tend to maintain a moist environment which is shown to accelerate re-epithelialization. The use of antibacterial compounds is important in the management of wound infections. A novel wound-dressing material based on a blended matrix of the polysaccharides alginate, hyaluronic acid and Chitlac-silver nanoparticles is here proposed and its application for wound healing is examined. The manufacturing approach to obtain membranes is based on gelling, foaming and freeze-casting of alginate, hyaluronic acid and Chitlac-silver nanoparticles mixtures using calcium ions as the cross-linking agent. Comprehensive evaluations of the morphology, swelling kinetics, permeability, mechanical characteristics, cytotoxicity, capability to inhibit metalloproteinases and of antibacterial property were conducted. Biological in vitro studies demonstrated that hyaluronic acid released by the membrane is able to stimulate the wound healing meanwhile the metal silver exploits an efficient antibacterial activity against both planktonic bacteria and biofilms. Overall, the experimental data evidence that the studied material could be used as antibacterial wound dressing for wound healing promotion.

Ionic chitosan gels fabricated using multivalent anions, tripolyphosphate (TPP) or pyrophosphate (PPi), respectively, have been investigated as potential biomaterials to be used in tissue engineering. Starting from the hypothesis that the polymer mesh texture at the microscale affects the final performance of the resulting materials, an innovative image analysis approach is presented in the first part of the article, which is aimed at deriving quantitative information from transmission electron microscopy images. The image analysis of the (more extended) central area of the gel networks revealed differences between both the cross-linking densities and pore size distributions of the two systems, the TPP gels showing a higher connectivity. Chitosan-TPP gels showed a limited degradation in simulated physiological media up to 6 weeks, reasonably ascribed to the texture of the (more extended) central area of the gels, whereas PPi counterparts degraded almost immediately. The release profiles and the calculation of diffusion coefficients for bovine serum albumin and cytochrome c, herein used as model payloads, indicated a different release behavior depending on the polymer network homogeneity/inhomogeneity and molecular weight of loaded molecules. This finding was ascribed to the marked inhomogeneity of the PPi gels (at variance with the TPP ones), which had been demonstrated in our previous work. Finally, thorough in vitro studies demonstrated good biocompatibility of both chitosan gels, and because of this feature, they can be used as suitable scaffolds for cellular colonization and metabolic activity.

The effect of transient cross-links has been explored on a lactose-modified chitosan, which previously had shown interesting biological features. The presence of galactose side chains and of the polyol spacer resulted particularly appealing for the reticulation by borate ions. The interaction between chitlac and borax was investigated by means of 11B NMR while rheology pointed to a marked non-linear behavior depending on the amount of borax added to the system. The presence of limited amount of cross-linking ion led to dilatant behavior when the steady flow curve was measured. In addition, strain stiffening was noticed on elastic response upon exceeding a critical stress, indicating a transient nature in the formation of the cross-links. The non-linear response of chitlac in the presence of borax compared surprisingly well with the one showed by proteins composing the natural ECM pointing at a possible role of mechanotransduction in the biological significance of the modified chitosan.

Complex coacervation of two oppositely charged polysaccharides, namely a lactose-modified chitosan (CTL) and hyaluronan (HA), was investigated in this study. Coacervates of the two polysaccharides were prepared by drop-by-drop injection of HA into CTL. Transmittance and dynamic light scattering (DLS) measurements in combination with TEM analyses demonstrated the formation of spheroidal colloids in the nano-/microsize range showing good homogeneity. Strikingly, the presence of 150 mM supporting NaCl did not hamper the colloid formation. Stability studies on selected formulations demonstrated that HA/CTL coacervates were stable up to 3 weeks at 37 °C and behaved as pH-responsive colloids since transition from entangled to disentangled chains was attained for a proper pH range. The possibility of freeze-drying the coacervates for storage purposes and the ability of encapsulating selected payloads were investigated as well, for two values of the fraction of the lactitol side-chain substitution (FL). Finally, biological tests using human neutrophils were undertaken at acidic pH value (pH = 6.0): under such experimental conditions, akin to those frequently occurring in the inflammatory microenvironment, coacervates scavenged reactive oxygen species (ROS) generated by these cells in basal conditions. Given the well documented bioactivity of CTL with respect to chitosan toward cartilage regeneration, these findings point to a possible application of HA/CTL-based colloids as scavenging and bioactive carriers for the delivery of therapeutic molecules at confined inflamed sites such as knee joints.

Chitosan macro- and micro/nano-gels have gained increasing attention in recent years, especially in the biomedical field, given the well-documented low toxicity, degradability, and non-immunogenicity of this unique biopolymer. In this review we aim at recapitulating the recent gelling concepts for developing chitosan-based physical gels. Specifically, we describe how nowadays it is relatively simple to prepare networks endowed with different sizes and shapes simply by exploiting physical interactions, namely (i) hydrophobic effects and hydrogen bonds—mostly governed by chitosan chemical composition—and (ii) electrostatic interactions, mainly ensured by physical/chemical chitosan features, such as the degree of acetylation and molecular weight, and external parameters, such as pH and ionic strength. Particular emphasis is dedicated to potential applications of this set of materials, especially in tissue engineering and drug delivery sectors. Lastly, we report on chitosan derivatives and their ability to form gels. Additionally, we discuss the recent findings on a lactose-modified chitosan named Chitlac, which has proved to form attractive gels both at the macro- and at the nano-scale.

Chitosan and its highly hydrophilic 1-deoxy-lactit-1-yl derivative (Chitlac) are polysaccharides with increasing biomedical applications. Aimed to unravel their conformational properties we have performed a series of molecular dynamics simulations of Chitosan/Chitlac decamers, exploring different degrees of substitution (DS) of lactitol side chains. At low DS, two conformational regions with different populations are visited, while for DS ≥ 20% the oligomers remain mostly linear and only one main region of the glycosidic angles is sampled. These conformers are (locally) characterized by extended helical "propensities". Helical conformations 32 and 21, by far the most abundant, only develop in the main region. The accessible conformational space is clearly enlarged at high ionic strength, evidencing also a new region accessible to the glycosidic angles, with short and frequent interchange between regions. Simulations of neutral decamers share these features, pointing to a central role of electrostatic repulsion between charged moieties. These interactions seem to determine the conformational behavior of the chitosan backbone, with no evident influence of H-bond interactions. Finally, it is also shown that increasing temperature only slightly enlarges the available conformational space, but certainly without signs of a temperature-induced conformational transition.

Current strategies in Central Nervous System (CNS) repair focus on the engineering of artificial scaffolds for guiding and promoting neuronal tissue regrowth. Ideally, one should combine such synthetic structures with stem cell therapies, encapsulating progenitor cells and instructing their differentiation and growth. We used developments in the design, synthesis, and characterization of polysaccharide-based bioactive polymeric materials for testing the ideal composite supporting neuronal network growth, synapse formation and stem cell differentiation into neurons and motor neurons. Moreover, we investigated the feasibility of combining these approaches with engineered mesenchymal stem cells able to release neurotrophic factors. We show here that composite bio-constructs made of Chitlac, a Chitosan derivative, favor hippocampal neuronal growth, synapse formation and the differentiation of progenitors into the proper neuronal lineage, that can be improved by local and continuous delivery of neurotrophins. Statement of Significance In our work, we characterized polysaccharide-based bioactive platforms as biocompatible materials for nerve tissue engineering. We show that Chitlac-thick substrates are able to promote neuronal growth, differentiation, maturation and formation of active synapses. These observations support this new material as a promising candidate for the development of complex bio-constructs promoting central nervous system regeneration. Our novel findings sustain the exploitation of polysaccharide-based scaffolds able to favour neuronal network reconstruction. Our study shows that Chitlac-thick may be an ideal candidate for the design of biomaterial scaffolds enriched with stem cell therapies as an innovative approach for central nervous system repair.

The present contribution aims at describing the fabrication of coacervates in the nano-size range starting from a 1-deoxylactit-1-yl chitosan (in this manuscript termed as CTL60) and the multivalent anion tripolyphosphate (TPP). Colloidal coacervates have been obtained for precise values of the molar ratio of TPP to CTL60 repeating unit. Coacervation is ensured only at pH 4.5 and not at 7.4, thus demonstrating the key role of electrostatic interactions in the stabilization of the coacervates. At a variance with chitosan, CTL60 favors the formation of highly homogeneous coacervates with very low values of the polydispersity index (PDI). Moreover, CTL60 coacervates can be freeze-dried without any cryoprotectant, they can host a model molecule and are stable up to three weeks at 4 °C. Conversely, such coacervates dissolve upon increasing pH and ionic strength. By considering the bioactive polycation CTL60, the present system can be suggested as a first step in the development of innovative biologically-active nano-carriers to be used as drug delivery systems

Polysaccharide networks, in the form of hydrogels and dried membranes based on chitosan and on the cross-linker tripolyphosphate (TPP), were developed using a novel approach. TPP was incorporated into chitosan by slow diffusion to favor a controlled gelation. By varying chitosan, TPP, and NaCl concentration, transition from inhomogeneous to homogeneous systems was achieved. Rheology and uniaxial compression tests enabled to identify the best performing hydrogel composition with respect to mechanical properties. FTIR, (31)P NMR, and spectrophotometric methods were used to investigate the interaction chitosan-TPP, the kinetics of phosphates diffusion during the dialysis and the amount of TPP in the hydrogel. A freeze-drying procedure enabled the preparation of soft pliable membranes. The lactate dehydrogenase assay demonstrated the biocompatibility of the membranes toward fibroblasts. Overall, we devised a novel approach to prepare homogeneous macroscopic chitosan/TPP-based biomaterials with tunable mechanical properties and good biocompatibility that show good potential as novel polysaccharide derivatives.

The present manuscript deals with the setup and evaluation of two analytical methods, namely Circular Dichroism (CD) and 23Na longitudinal relaxation, to determine the composition of binary mixtures of the sodium salts of alginate and hyaluronan in solution. The quantitative results obtained were confirmed by 1H NMR, and the developed methods were applied to the determination of the composition and polymer release of mixed hydrogels. Although focused on the specific case of binary mixtures of alginate and hyaluronan, the approach drawn in the present manuscript can find applications in different binary systems composed of natural or synthetic non-interacting polymers.

The initial binding of calcium ions by alginate chains was investigated in dilute solution. The use of viscometry, light scattering, circular dichroism, and fluorescence quenching performed on both Ca(2+) and Mg(2+) alginate systems allowed collecting new experimental data in addition to those already reported in the literature. This led us to propose an ion multicomplex binding modality and to disprove the Ca(2+)-alginate monocomplex formation. The first mode of bonding was proposed to be formed by four G residues from facing chains in a conformation which, albeit ordered, is different from the well-known "egg box" one. This was indicated as a locally tilted conformation (tilted egg-box). The addition of further bonding ions caused the well-known cooperative egg-box conformation (strong bonding) with notable variation in the physical-chemical properties of the dilute solution.

In this study nano-composite scaffolds to be used as bone grafts have been endowed with antibacterial properties owing to the presence of silver nanoparticles. The alginate/hydroxyapatite composite scaffolds were prepared by internal gelation followed by a freeze-drying procedure to obtain a porous structure. The nanoparticles were prepared in presence of a lactose modified-chitosan and this colloidal solution was adsorbed on the scaffolds by exploiting electrostatic interactions. The adsorption and release of the silver from the composite scaffold was measured by ICP-AES and spectrofluorimetry measurements. Micro-computed tomography analysis of the scaffolds showed a homogeneous porous structure with average pore sizes of 341.5 μm and porosity of 80 %. In vitro biological tests (MTS and killing kinetics assays) demonstrated that silver does not affect the ability of the scaffolds to promote osteoblasts proliferation and that at the same time it exerts a strong bactericidal effect against both Gram+ and Gram- bacterial strains. Overall, the combined results indicate that these biocompatible antimicrobial scaffolds possess ideal characteristics for tissue engineering applications.

Sterilization methods such as gamma-irradiation, steam sterilization and ethylene oxide gas treatment can have negative effects on molecular structure and properties of polysaccharide-based biomaterials. In this perspective, the use of supercritical carbon dioxide (scCO(2)) has been proposed as an alternative method for biomaterial sterilization. In this work, chemical, mechanical and biological properties of polysaccharidic membranes for surgical applications were investigated after sterilization by scCO(2). Four sets of sterilizing conditions were considered and SEC analyses were performed in order to identify the one with lower impact on the polysaccharidic matrix of membranes (alginate). Mechanical tests showed that the resistance of membranes was slightly affected after sterilization. Biological analyses proved the biocompatibility of the sterilized membranes both in vitro and in a preliminary in vivo test. Overall, this study points out that this sterilization technique can be successfully employed to achieve an effective and safe sterilization of polysaccharidic membranes for surgical use. (C) 2017 Elsevier Ltd. All rights reserved.

Tissue damage caused by excessive amounts of neutrophil-derived reactive oxygen species (ROS) occurs in many inflammatory diseases. Butyrate is a short-chain fatty acid (SCFA) with known anti-inflammatory properties, able to modulate several neutrophil functions. Evidence is provided here that butyrate inhibits neutrophil ROS release in a dose and time-dependent fashion. Given the short half-life of butyrate, chitosan/hyaluronan nanoparticles are next designed and developed as controlled release carriers able to provide cells with a long-lasting supply of this SCFA. Notably, while the inhibition of neutrophil ROS production by free butyrate declines over time, that of butyrate-loaded chitosan/hyaluronan nanoparticles (B-NPs) is sustained. Additional valuable features of these nanoparticles are inherent ROS scavenger activity, resistance to cell internalization, and mucoadhesiveness. B-NPs appear as promising tools to limit ROS-dependent tissue injury during inflammation. Particularly, by virtue of their mucoadhesiveness, B-NPs administered by enema can be effective in the treatment of inflammatory bowel diseases.

The manuscript focuses on the demixing of hyaluronan and alginate in the hydrogel state. Binary solutions of the two polysaccharides have been treated with Ca2+ as the alginate cross-linking ion and the radial distribution of the two components in the hydrogels was measured by means of 1H NMR. These results revealed the presence of alginate-enriched and hyaluronan-enriched domains stemming from a polysaccharide demixing. The hydrogels were characterized by means of uniaxial compression and creep-compliance measurements which showed that the demixing increased the overall resistance of the hydrogel to stress. In addition, due to the viscoelastic properties of hyaluronan, a marked increase of the Newtonian viscosity of the constructs was noticed. The peculiarity of the effect of hyaluronan was demonstrated by the use of an alginate unable to form gel by binding non-calcium binding alginate, i.e. mannuronan, ruling out the effect of viscosity over the time-dependent behavior of the mixed hyaluronan-alginate hydrogels.

The present work aims at understanding the structural basis of the biological recognition of Tn antigen (GalNAc-α-O-L-Ser), a specific epitope expressed by tumor cells, and the role of its amino acidic moiety in the interaction with its receptor (the isolectin B4 extracted from Vicia villosa). An NMR structural characterization of the α and β anomers, based on J couplings and molecular modeling revealed a structure in very good agreement with data reported in literature for variants of the same molecules. In order to demonstrate the involvement of the amino acid in the ligand–receptor recognition, also GalNAc-α-O-D-Ser was studied; the change in the stereochemistry is in fact expected to impact on the interaction only in case the serine is part of the epitope. Relaxation properties in the presence of the receptor clearly indicated a selective recognition of the natural L form, probably due to the formation of a water-mediated hydrogen bond with Asn 129 of the protein.

Iodinated contrast media (ICM) are persistent and ubiquitous water pollutants. Because of their high water solubility and biochemical stability, their phase-separation and recovery from the aquatic environment is very difficult. Here, borate was chosen as a complexing agent of the two diagnostic aids iomeprol and iopamidol in order to provide them with a negative charge and to fix the resulting adducts on Dowex 1X4 ion exchangers. A systematic characterization study of the complex by means of capillary zone electrophoresis and 11B NMR revealed that iomeprol and iopamidol interact with borate anions in aqueous solutions giving a 1:1 single-charged adduct and that the association constant at 25 °C for both contrast agents is highest at pH 10.5. These findings allowed the proper calibration of experimental parameters for further batch adsorption–desorption trials, where the two ICM were shown to be almost completely removed from the water phase and released from the solid sorbents in mild conditions, enabling the recovery of functional resin.

Ionotropic gelation of chitosan by means of opposite charged ions represents an efficient alternative to covalent reticulation because of milder condition of use and, in general, higher biocompatibility of the resulting systems. In this work 90° light scattering (turbidimetry), circular dichroism (CD) and 1H NMR measurements have been performed to study the interactions between the biopolymer and ionic cross-linkers tripolyphosphate (TPP) and pyrophosphate (PPi) in dilute solutions. Thereafter, a dialysis-based technique was exploited to fabricate tridimensional chitosan hydrogels based on both polyanions. Resulting matrices showed a different mechanical behavior because of their peculiar mesh-texture at micro/nano-scale: in the present contribution we demonstrate that TPP and PPi favor the formation of homogeneous and inhomogeneous systems, respectively. The different texture of networks could be exploited in future for the preparation of systems for the controlled release of molecules.

In this study we present a novel silver complex of hyaluronan-lipoate (SHLS12) in a gel-state form. NMR analysis, conductometry and elemental analysis demonstrated stable non-covalent interactions between silver ions and the polysaccharide-lipoate backbone, whereas rheological investigations confirmed its gel-like physical-chemical behavior. Biological studies showed the ability of SHLS12 to exert a straightforward activity against different bacterial strains grown in sessile/planktonic state. The biocompatibility was also proved toward two eukaryotic cell lines. By considering both its ability to preserve antibacterial properties when exposed to the serum protein BSA and its low susceptibility to be degraded by hyaluronidase enzyme, this novel complex may be considered as a promising biomaterial for future in vivo applications.

In this work, hydrogen peroxide (H2O2) was employed to improve the adhesion of an alginate-based membrane to intestinal serosa: mechanical adhesion test and SEC-MALLS studies were performed to investigate the contribution of H2O2-induced modifications of both tissue and membrane to the adhesion enhancement. Adhesion tests confirmed that the formation of an adhesive gelatin layer on serosa plays a major role in increasing adhesion forces, while SEC-MALLS studies revealed a slight decrease of alginate molecular weight. However, the latter chain degradation does not seem to significantly impair the adhesion strength. Overall, this study describes a possible strategy to create adhesive interfaces between biomaterials and collagen-containing tissues.

stract Silver-based products have been proven to be effective in retarding and preventing bacterial growth since ancient times. In the field of restorative dentistry, the use of silver ions/nanoparticles has been explored to counteract bacterial infections, as silver can destroy bacterial cell walls by reacting with membrane proteins. However, it is also cytotoxic towards eukaryotic cells, which are capable of internalizing nanoparticles. In this work, we investigated the biological effects of Chitlac-nAg, a colloidal system based on a modified chitosan (Chitlac), administered for 24-48 h to a co-culture of primary human gingival fibroblasts and Streptococcus mitis in the presence of saliva, developed to mimic the microenvironment of the oral cavity. We sought to determine its efficiency to combat oral hygiene-related diseases without affecting eukaryotic cells. Cytotoxicity, reactive oxygen species production, apoptosis induction, nanoparticles uptake, and lysosome and autophagosome metabolism were evaluated. In vitro results show that Chitlac-nAg does not exert cytotoxic effects on human gingival fibroblasts, which seem to survive through a homoeostasis mechanism involving autophagy. That suggests that the novel biomaterial Chitlac-nAg could be a promising tool in the field of dentistry.

Capillary electrophoresis (CE) applications to charged polysaccharides are briefly reported. A simple procedure is presented to determine the esterification degree of a hyaluronan derivative. In this case, the degree of substitution was as low as 14%. The molecular weight distribution of mannuronic oligosaccharides mixture produced by hydrolysis of native polymannuronic is readily calculated from peak area of the species resolved by CE on the basis of a specific degree of polymerization. The influence of the applied electric field strength on the free solution mobility of hyaluronan samples is briefly addressed for molar masses of the order of 10(5) and 10(6) g/mol. The data are compared with the results obtained for a 50% galactose-substituted hyaluronic acid (HA). Mobility data obtained as a function of buffer pH for a native HA sample as well as for two galactose-amide HA derivatives, having slightly different degrees of substitution, are presented and discussed in terms of the polymer charge density parameters xi. In most cases, more questions than answers arise from the application of CE to charged polysaccharides. However, perspectives are disclosed for a further understanding of the reliability of CE applied for the structural elucidation of such macromolecules.

Treatment of non-healing wounds represents hitherto a severe dilemma because of their failure to heal caused by repeated tissue insults, bacteria contamination and altered physiological condition. This leads to face huge costs for the healthcare worldwide. To this end, the development of innovative biomaterials capable of preventing bacterial infection, of draining exudates and of favoring wound healing is very challenging. In this study, we exploit a novel technique based on the slow diffusion of tripolyphosphate for the preparation of macroscopic chitosan hydrogels to obtain soft pliable membranes which include antimicrobial silver nanoparticles (AgNPs) stabilized by a lactose-modified chitosan (Chitlac). UV-Vis and TEM analyses demonstrated the time stability and the uniform distribution of AgNPs in the gelling mixture, while swelling studies indicated the hydrophilic behavior of membrane. A thorough investigation on bactericidal properties of the material pointed out the synergistic activity of chitosan and AgNPs to reduce the growth of S. aureus, E. coli, S. epidermidis, P. aeruginosa strains and to break apart mature biofilms. Finally, biocompatibility assays on keratinocytes and fibroblasts did not prove any harmful effects on the viability of cells. This novel technique enables the production of bioactive membranes with great potential for the treatment of non-healing wounds.

The theoretical model devised in the previous paper (Donati, I.; Benegas, J. C.; Cesàro, A.; Paoletti, S. Biomacromolecules 2006, 7 (5), 1587-1596) for the description of ion-induced chain aggregation is here applied to the case of chain dimerization of poly(galacturonate) in the presence of calcium ions. Particular attention has been directed toward the initial stage of dimer formation [i.e., in the low regime of calcium-to-polymer ratio (Rj)]. Circular dichroism (CD) data allowed evaluation of the fraction, theta, of calcium ions bound within chain dimers according to the "egg-box"-model. The theoretical model was able to reproduce satisfactorily the total molar enthalpy variation experimentally determined; the contributions of affinity (specificity in territorial condensation) and chemical bonding of calcium counterions to the thermodynamic properties of the system (i.e., enthalpy and entropy) were calculated. The intrinsic molar enthalpy of bonding, DeltaH(bond,0), displayed a peculiar sigmoid dependence on Rj. In particular, its decrease toward more negative values was interpreted as stemming from a (cooperative) calcium-induced conformational change that accompanies pectate chain pairing upon junction formation. The calculated pKin of instability of the Ca-(GalA-)4 complex was 10.80, in very good agreement with the corresponding value reported for the Ca-EDTA complex (i.e., 10.96). Significant contributions to the complex stability were the enthalpy of ion pairing (DeltaH(ionpairing,bond) = -5.1 kcal (mol calcium)-1, in good agreement with the value reported for calcium-EDTA: approximately -5.4 kcal (mol calcium)-1), and the entropy of desolvation (DeltaS(desolv,bond) = 43.7 cal mol-1 K-1, well within the range of values reported for calcium-EDTA: 42-57 cal mol-1 K-1).

Polyuronates such as pectate and alginate are very well-known examples of biological polyelectrolytes undergoing, upon addition of divalent cations, an interchain association that acts as the junction of an eventually formed stable hydrogel. In the present paper, a thermodynamic model based on the counterion condensation theory has been developed to account for this cation-induced chain pairing of negatively charged polyelectrolytes. The strong interactions between cross-linking ions and uronate moieties in the specific binding site have been described in terms of chemical bonding, with complete charge annihilation between the two species. The chain-pairing process is depicted as progressively increasing with the concentration of cross-linking counterions and is thermodynamically defined by the fraction of each species. On these bases, the total Gibbs energy of the system has been expressed as the sum of the contributions of the Gibbs energy of the (single) chain stretches and of the (associated) dimers, weighted by their respective fractions 1 - theta and theta. In addition, the model assumes that the condensed divalent counterions exhibit an affinity free-energy for the chain, G(C)(aff,0), and the junction, G(D)(aff,0), respectively. Moreover, a specific Gibbs energy of chemical bonding, G(bond,0), has been introduced as the driving force for the formation of dimers. The model provides the mathematical formalism for calculating the fraction, theta, of chain dimers formed and the amount of ions condensed and bound onto the polyelectrolyte when two different types of counterions (of equal or different valence) are present. The effect of the parameter G(bond,0) has been investigated and, in particular, its difference from G(C,D)(aff,0) was found to be crucial in determining the distribution of the ions into territorial condensation and chemical bonding, respectively. Finally, the effect of the variation of the molar ratio between cross-linking ions and uronic groups in the specific binding sites, sigma0, was evaluated. In particular, a remarkable decrease in the amount of condensed counterions has been pointed out in the case of sigma0 = 1/3, with respect to the value of sigma0 = 1/4, characterizing the traditional "egg-box" structure, as a result of the drop of the charge density of the polyelectrolyte induced by complete charge annihilation.

Evidences for the involvement of the Galectin-1 in the interaction of pig chondrocytes with a lactose-modified chitosan, namely Chitlac, are reported. The Chitlac glycopolymer has been shown to promote pig chondrocyte aggregation and to induce extracellular matrix production. Highly pure Galectin-1 was obtained from pig spleen by affinity chromatography and its identity was determined by ion spray mass spectrometry analysis of tryptic peptide fragments obtained after in-gel digestion. The complete sequence of pig Galectin-1 CDS was obtained by screening a pig EST database using human Galectin-1 sequence as template. The Galectin-1 cDNA was cloned into a pGEX-4T-1 expression vector and the recombinant protein was purified, characterized and used to produce a rabbit anti-serum. Recombinant Galectin-1 interacts in a dose-dependent manner with Chitlac as determined with ELISA assay. Expression level of galectin-1 gene, quantified by real-time PCR, was significantly higher in chondrocytes cultivated on Chitlac. In the same way, the presence of Chitlac stimulates secretion of Galectin-1 in culture medium that, by immunohistochemical analysis, revealed to be clustered on the surface of Chitlac-induced aggregates. These data indicate the role of Galectin-1 as a bridging agent between Chitlac and chondrocyte aggregates.

Circular dichroism (CD) is presented as a reliable and sensitive method of determining the diadic frequency composition of alginate (F(GG), F(MM) and F(GM+MG)). The availability of samples, very largely or even completely conforming to the limiting structures of polymannuronate (MM)(n), polyguluronate (GG)(n) and polyalternating MG (MG)(n), respectively, allowed the limiting CD spectra for each alginate diad to be obtained. These showed very different CD behaviour, thus pointing out the crucial importance of the neighbouring residue in chiroptical properties. Using an iterative best-fit procedure, the diadic composition of commercial alginates could be obtained from their respective CD spectra by means of a linear combination of the spectra of the three limiting diads. The results were found in excellent agreement with the composition parameters obtained by 1H NMR spectroscopy.

nessuno

The present manuscript addresses the description of binary systems of hyaluronan (HA) and alginate (Alg) in semi-concentrated solution. The two polysaccharides were completely miscible in the entire range of relative weight fraction explored at a total polymer concentration of up to 3 % (w/V). The rheological study encompassed steady flow and mechanical spectra for HA/Alg systems at different weight fractions with hyaluronan at different molecular weights. These extensive analyses allowed us to propose a model for the molecular arrangement in solution that envisages a mutual exclusion between the two polysaccharides even though a clear phase separation does not occur. This result may have profound implications when biomaterials based on the combination of alginate and hyaluronan are proposed in the field of biomedical materials.

Objectives The aim of this study was to determine the in vitro microbiological performances of a lactose-modified chitosan (Chitlac) coating inside which silver nanoparticles were embedded (Chitlac-nAg) for BisGMA/TEGDMA methacrylic specimens. Methods Different concentrations of nAg inside Chitlac coating were tested (1 mM, 2 mM, 5 mM). Specimen surface was analyzed by means of field-emission scanning electron microscopy (FEISEM) and energy-dispersive X-ray spectroscopy (EDS). A 48 h monospecific Streptococcus mutans biofilm was developed over the specimen surfaces using a modified drip-flow bioreactor; adherent viable biomass was assessed by MTT test and biofilm was imaged by confocal laser-scanning microscopy (CLSM). Results The presence of finely dispersed nanoparticles inside the Chitlac coating was confirmed by FEISEM and EDS analysis. All nanoparticles were embedded in the Chitlac coating layer. Chitlac-nAg coatings were able to significantly decrease biofilm formation depending on the nAg concentration, reaching a −80% viable biomass decrease when the 5 mM nAg-Chitlac group was confronted to non-coated control specimens. CLSM analysis did not provide evidence of a contact-killing activity, however the antibacterial Chitlac-nAg coating was able to alter biofilm morphology preventing the development of mature biofilm structures. Conclusions The microbiological model applied in this study helped in assessing the antibacterial properties of a coating designed for methacrylate surfaces. Clinical significance A microbiological model based on a bioreactor-grown biofilm is useful for preliminary in vitro tests of dental materials. In translational terms, an antibacterial nanocomposite coating based on Chitlac-nAg and designed to be applied to methacrylic surfaces may be a promising way to obtain dental materials able to actively prevent secondary caries.

Structural properties of several cross-linked hyaluronan derivatives, obtained by scanning electron microscopy, monodimensional NMR microscopy and small angle X-ray scattering of synchrotron radiation, are presented and compared with those observed for non-modified hyaluronic acid, used as a reference material. The experimental results, obtained in different media, showed a consistent picture of the synthesized matrices. In particular, the presence of zones of denser polymeric material observed by electron microscopy resulted in a higher transversal relaxation rate of the bulk water protons as well as in a decrease of the diffusion coefficient obtained by NMR microscopy. Moreover, the presence of polymer junction zones gave rise to the appearance of a well-defined correlation peak in the pattern of intensity of the scattered X-radiation.

Light scattering (LS) investigations have additionally confirmed the intramolecular nature of the fundamental ordered conformation (single helix) of κ-carrageenan in aqueous 0.1 M NaI. The partial replacement of sodium with cesium ions induces a (thermoreversible) intermolecular association of the polysaccharide in the ordered conformation. The association-inducing effect can be observed already at the lowest investigated concentration of the cation. We found no significant change of the thermodynamic properties related to an alleged composition threshold value in the range of the cesium equivalent fraction, X Cs , from 0.12 to 0.40. The extent and the rate of the association process strongly increase with the concentration of cesium. Equilibrium values for the association constant could be obtained except for the case of X Cs = 0.40, where the process is too massive to allow long-time LS investigation. In the latter condition, some additional stiffening of the chain was noticed.

The synthesis of some glycosylamines (1-amino-1-deoxy D-glucose, 1-amino-1-deoxy-D-galactose and 1-amino-1-deoxylactose) was carried out by treatment of the corresponding reducing sugars with ammonium hydrogencarbonate in concentrated ammonia. The reaction mixture was first analyzed by capillary electrophoresis with indirect absorbance detection and high performance anion-exchange chromatography with pulsed amperometric detection. Beside glycosylcarbamate, a known reaction by-product, fructose and lactulose were detected during the synthesis of 1-amino-1-deoxyglucose and 1-amino-1-deoxylactose, respectively. Quantification of glycosylamines was carried out by micellar electrokinetic chromatography with UV detection of their 9-fluorenylmethyloxycarbonyl (Fmoc) derivatives; lactulosylamine was thus detected in the synthesis mixture of 1-amino-1-deoxylactose. The Fmocglycosylamines were easily purified from the other components of the crude synthesis mixtures.

The temperature-induced helix-to-coil conformational transition accompanying the thermoreversible gelation of syndiotactic poly(methyl methacrylate) in toluene was studied by rheology and FTIR and 1H NMR spectroscopy. Both rheological and FTIR measurements, carried out dynamically as a function of temperature, revealed a marked hysteresis between the heating and the cooling cycles. It was not possible to assess a quantitative difference between the values of the temperature of onset of the physical variations between the rheological and the spectroscopic experiments. It is then possible to conclude that a conformational change of the backbone (from the evolution of the band at 860 cm-1) is the molecular basis of the macroscopic formation of the gel. Spin−spin relaxation time, or T2, measurements were used in the 1H NMR study. The data obtained from the relaxation behavior of the α-methyl group, indicated a fraction of 0.28 for the chain repeating units incorporated in highly cooperative helical stretches,...

Chemical bonding of counterions to a linear polyelectrolyte is addressed within the framework of the counterion condensation theory of linear polyelectrolytes. The model allows for the proper identification of the kind of counterion association to a linear polyelectrolyte when it is in solution with two different types of counterions (of equal or different valences). Two extreme modes of counterion association to the polyelectrolyte are considered: loose territorial (“classical” condensation) and a coalent bonding at a specific site on the polyion. The model provides analytical expressions for calculating the fraction of counterions in each type of association. Any thermodynamic function of interest can also be readily computed through the appropriate function of the calculated excess Gibbs energy of the system. The concentrations of the different types of associated counterions, for a few particular solution conditions, are presented and discussed in order to provide tools not only for analyzing experimental results, but also for planning suitable experiments aimed at discriminating between the two types of counterion association proposed.

The conformational transition of ι-carrageenan in different salt solutions under nongelling conditions has been studied by light scattering (WALLS). The focus is on the thermodynamic interactions and the concentration dependence of the reduced scattering intensity at zero angle. An upward curvature of (KC p /R 0 ) in conditions of conformational ordering has been interpreted as due to a concentration-dependent reversible chain association. The open association model of Elias has been applied to analyze the data. In conditions of conformational ordering a decrease of polymer concentration, Cp, is accompanied by a decrease of (M w ) assoc . These results have been confirmed by using low-angle light scattering (LALLS). In the lowest range of Cp, the decreasing values of (M w ) assoc are already very close to that of the single-stranded disordered conformation. In the same range, the values of the specific optical activity remain constant. This is a confirmatory evidence that the fundamental ordered conformation of ι-carrageenan is a single helix.

A large number of light-scattering data indicate that the sulfated polysaccharide K-carrageenan undergoes an intramolecular conformational transition under suitable conditions from a semiflexible, disordered conformation to a rather rigid, helical one. By varying the parameters controlling the conformational phase diagram (i.e., by increasing the concentration of polymer or that of the supporting electrolyte, or both, or by decreasing temperature), a tertiary structure is manifested, through a progressive increase of the weight-average molar mass (M w ) as determined by light scattering. This can be very well explained in terms of a reversible association of stretches of such intramolecular helical structures and quantitatively described by a model of open association of two or more chains. The association of κ-carrageenan was demonstrated to take place at around room temperature also in the presence of iodide ions, as long as their concentration is ≥0.20 M. In this way the apparent inconsistency of a number of published M w results can be reconciled. Additional light-scattering results indicated that the demonstrated thermodynamic tendency to reversible interchain association may lead to an irreversible aggregation of polymer chains if an improper solution preparation procedure is used.

We examined the effect as donors of three aryl β-D-galactosides (i.e. p-nitrophenyl β-D-galactopyranoside, o-nitrophenyl β-D-galactopyranoside and phenyl β-D-galacto-pyranoside) on the regioselectivity and the yield of the synthesis of N-acetyllactosamine obtained from the transglycosylation reaction catalyzed by a crude preparation of β-D-galactosidase from Bacillus circulans at 25 °C, 37 °C and 55 °C, respectively. Using p-nitrophenyl β-D-galactopyranoside the reaction results were fully regiospecific at all the temperatures considered: the maximum molar yield (74%) was obtained at an incubation temperature of 55 °C. Using o-nitrophenyl β-D-galactopyranoside as the donor the reaction was still highly regioselective and the maximum molar yield (50%) was achieved at an incubation temperature also of 55 °C. Using phenyl β-D-galactopyranoside transglycolytic products appear only at an incubation temperature of 55 °C but at very low molar yield (about 14%) and lower regioselectivity.