Search

In contrast to other common anticoagulants such as citrate and low-molecular-weight heparin (LMWH), high-molecular-weight heparin (HMWH) induces the expression of matrix metalloproteinase (MMP)-9, which is also measured as a biomarker for stroke in blood samples. Mechanistically, HMWH-stimulated T cells produce cytokines that induce monocytic MMP-9 expression. Here, the influence of further anticoagulants (Fondaparinux, Hirudin, and Alteplase) and the heparin-contaminating glycosaminoglycans (GAG) hyaluronic acid (HA), dermatan sulfate (DS), chondroitin sulfate (CS), and over-sulfated CS (OSCS) on MMP-9 was analyzed to assess its suitability as a biomarker under various conditions. Therefore, starved Jurkat T cells were stimulated with anticoagulants/contaminants. Subsequently, starved monocytic THP-1 cells were incubated with the conditioned Jurkat supernatant, and MMP-9 mRNA levels were monitored (quantitative (q)PCR). Jurkat-derived mediators secreted in response to anticoagulants/contaminants were also assessed (proteome profiler array). The supernatants of HMWH-, Hirudin-, CS-, and OSCS-treated Jurkat cells comprised combinations of activating mediators and led to a significant (in the case of OSCS, dramatic) MMP-9 induction in THP-1. HA induced MMP-9 only in high concentrations, while LMWH, Fondaparinux, Alteplase, and DS had no effect. This indicates that depending on molecular weight and charge (but independent of anticoagulant activity), anticoagulants/contaminants provoke the expression of T-cell-derived cytokines/chemokines that induce monocytic MMP-9 expression, thus potentially impairing the diagnostic validity of MMP-9.

This article aimed at the synthesis and molecular docking assessment of new diimine Schiff base ligand, namely 2-((E)-(2-((Z)-2-(4-chlorophenyl)-2-hydroxyvinyl)hydrazono) methyl)-6-methoxyphenol (methoxy-diim), via the condensation of 1-(4-chloro-phenyl)-2-hydrazino-ethenol compound with 2-((E)-(2-((Z)-2-(4-chlorophenyl)-2-hydroxy vinyl) hydrazono)methyl)-6-methoxyphenol in acetic acid as well as the preparation of new binuclear complexes of Co(ii), Ni(ii), Cu(ii), and Zn(ii). The following synthesized complexes were prepared in a ratio of 2:1 (metal/ligand). The 1H-NMR, UV-Vis, and FTIR spectroscopic data; molar conductivity measurements; and microanalytical, XRD, TGA/DTG, and biological studies were carried out to determine the molecular structure of these complexes. According to the spectroscopic analysis, the two central metal ions were coordinated with the diamine ligand via the nitrogen of the hydrazine and oxygen of the hydroxyl groups for the first metal ions and via the nitrogen of the hydrazine and oxygen of the phenol group for the second metal ions. Molecular docking for the free ligand was carried out against the breast cancer 3hb5-oxidoreductase and the 4o1v-protein binding kidney cancer and COVID-19 protease, and good results were obtained.

Green hydrogen production via electrocatalytic water splitting paves the way for renewable, clean, and sustainable hydrogen (H2) generation. H2 gas is produced from the cathodic hydrogen evolution reaction (HER), where the reaction is catalyzed primarily from Pt-based catalysts under both acidic and alkaline environments. Lowering the loading of Pt and the search for alternative active catalysts for HER is still an ongoing challenge. Two-dimensional MXenes are effective supports to stabilize and homogenously distribute HER-active electrocatalysts to boost the HER performance. Factors involved in the effectiveness of MXenes for their role in HER include transition metal types and termination groups. Recently, tailoring the conditions during the synthesis of MXenes has made it possible to tune the morphology of MXenes from multilayers to few layers (delaminated), formation of porous MXenes, and those with unique crumpled and rolled structures. Changing the morphology of MXenes alters the surface area, exposed active sites and accessibility of electrolyte materials/ions to these active sites. This review provides insight into the effects of varying morphology of MXenes towards the electrocatalytic HER activity of the MXene itself and MXene composites/hybrids with HER-active catalysts. Synthesis methods to obtain the different MXene morphologies are also summarized.

Multilayering of optical thin films is widely used for a range of purposes in photonic technology, but the development of nanofiber structures that can outperform thin films and nanoparticles in optical applications cannot simply be disregarded. Hybrid structures composed of Tm3+-doped SiO2–HfO2 in the form of nanofibers (NFs) and thin films (TFs) are deposited on a single substrate using the electrospinning and dip-coating methods, respectively. Ultrafine nanofiber strands with a diameter of 10–60 nm were fabricated in both single and multilayer samples. Enhanced photoluminescence emission intensity of about 10 times was attained at wavelengths of around 457, 512 and 634 nm under an excitation of 350 nm for NF-TF-NF* hybrid structures when compared with single-layered NF and TF structures. The arrangement of nanofibers and thin films in a multilayer structure influenced the luminescence intensity and spectral bandwidth. High transparency in the range of 75–95% transparency across the wavelength of 200–2000 nm was achieved, making it ideal for photonic application. Theoretical findings obtained through IMD software were compared with experimental results, and they were found to be in good agreement.

In this study, a simple but sensitive sensor, Carbon paste electrode (CPE) was used for the determination of curcumin in human blood serum with high selectivity. The electrochemical behavior of curcumin at CPE was studied by cyclic voltammetry (CV). Furthermore, dependence of the oxidation and reduction currents of curcumin on pH of the experimental solution and the potential scan rate were also investigated. Using differential pulse voltammetry (DPV), the calibration plot was obtained within the concentration range of 3-300 µM with the detection limit of 5.03 µM. Electrochemical detection of curcumin by CPE electrode was achieved in this study with different technique.

Nanotechnology has gained much attention for its potential application in medical science. Iron oxide nanoparticles have demonstrated a promising effect in various biomedical applications. In particular, magnetite (Fe3O4) nanoparticles are widely applied due to their biocompatibility, high magnetic susceptibility, chemical stability, innocuousness, high saturation magnetisation, and inexpensiveness. Magnetite (Fe3O4) exhibits superparamagnetism as its size shrinks in the single-domain region to around 20 nm, which is an essential property for use in biomedical applications. In this review, the application of magnetite nanoparticles (MNPs) in the biomedical field based on different synthesis approaches and various surface functionalisation materials was discussed. Firstly, a brief introduction on the MNP properties, such as physical, thermal, magnetic, and optical properties, is provided. Considering that the surface chemistry of MNPs plays an important role in the practical implementation of in vitro and in vivo applications, this review then focuses on several predominant synthesis methods and variations in the synthesis parameters of MNPs. The encapsulation of MNPs with organic and inorganic materials is also discussed. Finally, the most common in vivo and in vitro applications in the biomedical world are elucidated. This review aims to deliver concise information to new researchers in this field, guide them in selecting appropriate synthesis techniques for MNPs, and to enhance the surface chemistry of MNPs for their interests.

Perfluorosulphonic acid-based membranes such as Nafion are widely used in fuel cell applications. However, these membranes have several drawbacks, including high expense, non-eco-friendliness, and low proton conductivity under anhydrous conditions. Biopolymer-based membranes, such as chitosan (CS), cellulose, and carrageenan, are popular. They have been introduced and are being studied as alternative materials for enhancing fuel cell performance, because they are environmentally friendly and economical. Modifications that will enhance the proton conductivity of biopolymer-based membranes have been performed. Ionic liquids, which are good electrolytes, are studied for their potential to improve the ionic conductivity and thermal stability of fuel cell applications. This review summarizes the development and evolution of CS biopolymer-based membranes and ionic liquids in fuel cell applications over the past decade. It also focuses on the improved performances of fuel cell applications using biopolymer-based membranes and ionic liquids as promising clean energy.

Blood sampling with different anticoagulants alters matrix metalloproteinase (MMP-) 9 expression, thus influencing its concentration and diagnostic validity. Here, we aimed to evaluate the effects of different anticoagulants on MMP-9 regulation. MMP-9 expression was assessed in response to ethylenediaminetetraacetic acid, citrate, and high-/low-molecular-weight heparin (HMWH, LMWH) in co-culture experiments using THP-1, Jurkat, and HT cells (representing monocytes, T, and B cells). Triple and double cell line co-culture experiments revealed that HMWH treatment of THP-1 and Jurkat led to a significant MMP-9 induction, whereas other anticoagulants and cell type combinations had no effect. Supernatant of HMWH-treated Jurkat cells also induced MMP-9 in THP-1 suggesting monocytes as MMP-9 producers. HMWH-induced cytokine/chemokine secretion was assessed in co-culture supernatant, and the influence of cytokines/chemokines on MMP-9 production was analyzed. These experiments revealed that Jurkat-derived IL-16 and soluble intercellular adhesion molecule (sICAM-) 1 are able to induce MMP-9 and IL-8 production by THP-1. As a consequence, the increased MMP-9 expression found in HMWH blood samples may be influenced by HMWH-dependent secretion of IL-16 and sICAM-1 by T cells resulting in an increased production of MMP-9 and IL-8 by monocytes. IL-8, in turn, may support MMP-9 and its own expression in a positive autocrine feedback loop.

We discuss the voltammetric methods that are used to assess metal–organic complexation in seawater. These consist of titration methods using anodic stripping voltammetry (ASV) and cathodic stripping voltammetry competitive ligand experiments (CSV-CLE). These approaches and a kinetic approach using CSV-CLE give similar information on the amount of excess ligand to metal in a sample and the conditional metal ligand stability constant for the excess ligand bound to the metal. CSV-CLE data using different ligands to measure Fe(III) organic complexes are similar. All these methods give conditional stability constants for which the side reaction coefficient for the metal can be corrected but not that for the ligand. Another approach, pseudovoltammetry, provides information on the actual metal–ligand complex(es) in a sample by doing ASV experiments where the deposition potential is varied more negatively in order to destroy the metal–ligand complex. This latter approach gives concentration information on each actual ligand bound to the metal as well as the thermodynamic stability constant of each complex in solution when compared to known metal–ligand complexes. In this case the side reaction coefficients for the metal and ligand are corrected. Thus, this method may not give identical information to the titration methods because the excess ligand in the sample may not be identical to some of the actual ligands binding the metal in the sample.