Search

The impact of COVID-19 and the urgency to develop a vaccine against the SARS-CoV-2 virus cannot be overstated. The viral fusion spike (S) protein ectodomain is the primary target for vaccine development. Here we report an unexpected cold sensitivity of a stabilized SARS-CoV-2 ectodomain construct currently being widely used for immunogen design. We found that when stored at 22 or 37 °C for 1 week, the S-protein displayed well-ordered trimeric spikes by negative stain electron microscopy. However, storage at 4 °C reduced the trimeric spikes to

SummaryNew SARS-CoV-2 variants that have accumulated multiple mutations in the spike (S) glycoprotein enable increased transmission and resistance to neutralizing antibodies. Here, we study the antigenic and structural impacts of the S protein mutations from four variants, one that was involved in transmission between minks and humans, and three that rapidly spread in human populations and originated in the United Kingdom, Brazil or South Africa. All variants either retained or improved binding to the ACE2 receptor. The B.1.1.7 (UK) and B.1.1.28 (Brazil) spike variants showed reduced binding to neutralizing NTD and RBD antibodies, respectively, while the B.1.351 (SA) variant showed reduced binding to both NTD- and RBD-directed antibodies. Cryo-EM structural analyses revealed allosteric effects of the mutations on spike conformations and revealed mechanistic differences that either drive inter-species transmission or promotes viral escape from dominant neutralizing epitopes.HighlightsCryo-EM structures reveal changes in SARS-CoV-2 S protein during inter-species transmission or immune evasion.Adaptation to mink resulted in increased ACE2 binding and spike destabilization.B.1.1.7 S mutations reveal an intricate balance of stabilizing and destabilizing effects that impact receptor and antibody binding.E484K mutation in B.1.351 and B.1.1.28 S proteins drives immune evasion by altering RBD conformation.S protein uses different mechanisms to converge upon similar solutions for altering RBD up/down positioning.

The SARS-CoV-2 spike (S) protein is the target of vaccine design efforts to end the COVID-19 pandemic. Despite a low mutation rate, isolates with the D614G substitution in the S protein appeared early during the pandemic, and are now the dominant form worldwide. Here, we explore spike conformational changes and the effects of the D614G mutation on a soluble S ectodomain construct. Cryo-EM structures reveal altered RBD disposition; antigenicity and proteolysis experiments reveal structural changes and enhanced furin cleavage efficiency of the G614 variant. Furthermore, furin cleavage alters the up/down ratio of the Receptor Binding Domains (RBD) in the G614 S ectodomain, demonstrating an allosteric effect on RBD positioning triggered by changes in the SD2 region, that harbors residue 614 and the furin cleavage site. Our results elucidate SARS-CoV-2 spike conformational landscape and allostery, and have implications for vaccine design., Graphical Abstract, Highlights • SARS-CoV-2 S 2P mutations do not impact its structure, stability or antigenicity. • D614G mutation increases RBD “up” state and enhances S1/S2 junction proteolysis. • Structure and antigenicity reveal allostery between the S1/S2 junction and RBD. • SD2 anchors the mobile RBD and NTD, separating large S1 subunit motions from S2., SARS-CoV-2 spike undergoes large conformational changes during cell fusion. Gobeil et al. identify a subdomain anchor that limits large motions in the receptor binding subunit of the pre-fusion spike from propagating to its fusion subunit. They demonstrate that the D614G mutation increases rate of furin cleavage, which may impact infectivity.

The SARS-CoV-2 spike (S) protein is the target of vaccine design efforts to end the COVID-19 pandemic. Despite a low mutation rate, isolates with the D614G substitution in the S protein appeared early during the pandemic, and are now the dominant form worldwide. Here, we analyze the D614G mutation in the context of a soluble S ectodomain construct. Cryo-EM structures, antigenicity and proteolysis experiments suggest altered conformational dynamics resulting in enhanced furin cleavage efficiency of the G614 variant. Furthermore, furin cleavage altered the conformational dynamics of the Receptor Binding Domains (RBD) in the G614 S ectodomain, demonstrating an allosteric effect on the RBD dynamics triggered by changes in the SD2 region, that harbors residue 614 and the furin cleavage site. Our results elucidate SARS-CoV-2 spike conformational dynamics and allostery, and have implications for vaccine design.HighlightsSARS-CoV-2 S ectodomains with or without the K986P, V987P mutations have similar structures, antigenicity and stability.The D614G mutation alters S protein conformational dynamics.D614G enhances protease cleavage susceptibility at the S protein furin cleavage site.Cryo-EM structures reveal allosteric effect of changes at the S1/S2 junction on RBD dynamics.

Understanding and eliciting protective immune responses to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is an urgent priority. To facilitate these objectives, we profile the repertoire of human leukocyte antigen class II (HLA-II)-bound peptides presented by HLA-DR diverse monocyte-derived dendritic cells pulsed with SARS-CoV-2 spike (S) protein. We identify 209 unique HLA-II-bound peptide sequences, many forming nested sets, which map to sites throughout S including glycosylated regions. Comparison of the glycosylation profile of the S protein to that of the HLA-II-bound S peptides reveals substantial trimming of glycan residues on the latter, likely induced during antigen processing. Our data also highlight the receptor-binding motif in S1 as a HLA-DR-binding peptide-rich region and identify S2-derived peptides with potential for targeting by cross-protective vaccine-elicited responses. Results from this study will aid analysis of CD4+ T cell responses in infected individuals and vaccine recipients and have application in next-generation vaccine design., Graphical Abstract, Parker et al map the HLA-II-bound peptides and glycopeptides presented by SARS-Cov-2 spike protein-pulsed monocyte-derived dendritic cells. They observe that complex glycans on the spike immunogen are trimmed during antigen processing, revealing a signature for HLA-II presentation, and highlight congruence between the HLA-II-bound peptides identified and T cell epitopes.

The coronavirus (CoV) viral host cell fusion spike (S) protein is the primary immunogenic target for virus neutralization and the current focus of many vaccine design efforts. The highly flexible S-protein, with its mobile domains, presents a moving target to the immune system. Here, to better understand S-protein mobility, we implemented a structure-based vector analysis of available β-CoV S-protein structures. We found that despite overall similarity in domain organization, different β-CoV strains display distinct S-protein configurations. Based on this analysis, we developed two soluble ectodomain constructs in which the highly immunogenic and mobile receptor binding domain (RBD) is locked in either the all-RBDs ‘down’ position or is induced to display a previously unobserved in SARS-CoV-2 2-RBDs ‘up’ configuration. These results demonstrate that the conformation of the S-protein can be controlled via rational design and provide a framework for the development of engineered coronavirus spike proteins for vaccine applications.

The glycan shield of the beta-coronavirus (β-CoV) Spike (S) glycoprotein provides protection from host immune responses, acting as a steric block to potentially neutralizing antibody responses. The conformationally dynamic S-protein is the primary immunogenic target of vaccine design owing to its role in host-cell fusion, displaying multiple receptor binding domain (RBD) ‘up’ and ‘down’ state configurations. Here, we investigated the potential for RBD adjacent, N-terminal domain (NTD) glycans to influence the conformational equilibrium of these RBD states. Using a combination of antigenic screens and high-resolution cryo-EM structure determination, we show that an N-glycan deletion at position 234 results in a dramatically reduced population of the ‘up’ state RBD position. Conversely, glycan deletion at position N165 results in a discernable increase in ‘up’ state RBDs. This indicates the glycan shield acts not only as a passive hinderance to antibody meditated immunity but also as a conformational control element. Together, our results demonstrate this highly dynamic conformational machine is responsive to glycan modification with implications in viral escape and vaccine design.

SummaryThe COVID-19 pandemic caused by SARS-CoV-2 has escalated into a global crisis. The spike (S) protein that mediates cell entry and membrane fusion is the current focus of vaccine and therapeutic antibody development efforts. The S protein, like many other viral fusion proteins such as HIV-1 envelope (Env) and influenza hemagglutinin, is glycosylated with both complex and high mannose glycans. Here we demonstrate binding to the SARS-CoV-2 S protein by a category of Fab-dimerized glycan-reactive (FDG) HIV-1-induced broadly neutralizing antibodies (bnAbs). A 3.1 Å resolution cryo-EM structure of the S protein ectodomain bound to glycan-dependent HIV-1 bnAb 2G12 revealed a quaternary glycan epitope on the spike S2 domain involving multiple protomers. These data reveal a new epitope on the SARS-CoV-2 spike that can be targeted for vaccine design.HighlightsFab-dimerized, glycan-reactive (FDG) HIV-1 bnAbs cross-react with SARS-CoV-2 spike.3.1 Å resolution cryo-EM structure reveals quaternary S2 epitope for HIV-1 bnAb 2G12.2G12 targets glycans, at positions 709, 717 and 801, in the SARS-CoV-2 spike.Our studies suggest a common epitope for FDG antibodies centered around glycan 709.

The trimeric HIV-1 Envelope protein (Env) mediates viral-host cell fusion via a network of conformational transitions, with allosteric elements in each protomer orchestrating host receptor-induced exposure of the co-receptor binding site and fusion elements. To understand the molecular details of this allostery, here, we introduce Env mutations aimed to prevent CD4-induced rearrangements in the HIV-1 BG505 Env trimer. Binding analysis and single−molecule Förster Resonance Energy Transfer confirm that these mutations prevent CD4-induced transitions of the HIV-1 Env. Structural analysis by single−particle cryo-electron microscopy performed on the BG505 SOSIP mutant Env proteins shows rearrangements in the gp120 topological layer contacts with gp41. Displacement of a conserved tryptophan (W571) from its typical pocket in these Env mutants renders the Env insensitive to CD4 binding. These results reveal the critical function of W571 as a conformational switch in Env allostery and receptor-mediated viral entry and provide insights on Env conformation that are relevant for vaccine design., Here, using cryo-EM and smFRET, Henderson et al. show how tryptophan 571 in the HIV-1 Env acts as a conformational switch during receptor-mediated viral entry and design HIV-1 Env proteins that cannot undergo conformational changes. This has important implications for HIV-1 vaccine design.

Summary Recognition of N-linked glycan at residue N276 (glycan276) at the periphery of the CD4-binding site (CD4bs) on the HIV-envelope trimer is a formidable challenge for many CD4bs-directed antibodies. To understand how this glycan can be recognized, here we isolate two lineages of glycan276-dependent CD4bs antibodies. Antibody CH540-VRC40.01 (named for donor-lineage.clone) neutralizes 81% of a panel of 208 diverse strains, while antibody CH314-VRC33.01 neutralizes 45%. Cryo-electron microscopy (cryo-EM) structures of these two antibodies and 179NC75, a previously identified glycan276-dependent CD4bs antibody, in complex with HIV-envelope trimer reveal substantially different modes of glycan276 recognition. Despite these differences, binding of glycan276-dependent antibodies maintains a glycan276 conformation similar to that observed in the absence of glycan276-binding antibodies. By contrast, glycan276-independent CD4bs antibodies, such as VRC01, displace glycan276 upon binding. These results provide a foundation for understanding antibody recognition of glycan276 and suggest its presence may be crucial for priming immunogens seeking to initiate broad CD4bs recognition.

Natural antibodies (Abs) can target host glycans on the surface of pathogens. We studied the evolution of glycan-reactive B cells of rhesus macaques and humans using glycosylated HIV-1 envelope (Env) as a model antigen. 2G12 is a broadly neutralizing Ab (bnAb) that targets a conserved glycan patch on Env of geographically diverse HIV-1 strains using a unique heavy-chain (VH) domain-swapped architecture that results in fragment antigen-binding (Fab) dimerization. Here, we describe HIV-1 Env Fab-dimerized glycan (FDG)-reactive bnAbs without VH-swapped domains from simian-human immunodeficiency virus (SHIV)-infected macaques. FDG Abs also recognized cell-surface glycans on diverse pathogens, including yeast and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike. FDG precursors were expanded by glycan-bearing immunogens in macaques and were abundant in HIV-1-naive humans. Moreover, FDG precursors were predominately mutated IgM+IgD+CD27+, thus suggesting that they originated from a pool of antigen-experienced IgM+ or marginal zone B cells., Graphical abstract, Structural and functional analyses identify a category of glycan-reactive antibodies in macaques and humans that are marked by the dimerization of the antigen-binding fragment. These antibodies are involved in HIV neutralization and also recognize the S2 protein of SARS-CoV-2.

Parainfluenza virus types 1–4 (PIV1–4) are highly infectious human pathogens, of which PIV3 is most commonly responsible for severe respiratory illness in newborns, elderly, and immunocompromised individuals. To obtain a vaccine effective against all four PIV types, we engineered mutations in each of the four PIV fusion (F) glycoproteins to stabilize their metastable prefusion states, as such stabilization had previously enabled the elicitation of high-titer neutralizing antibodies against the related respiratory syncytial virus. A cryoelectron microscopy structure of an engineered PIV3 F prefusion-stabilized trimer, bound to the prefusion-specific antibody PIA174, revealed atomic-level details for how introduced mutations improved stability as well as how a single PIA174 antibody recognized the trimeric apex of prefusion PIV3 F. Nine combinations of six newly identified disulfides and two cavity-filling mutations stabilized the prefusion PIV3 F immunogens and induced 200- to 500-fold higher neutralizing titers in mice than were elicited by PIV3 F in the postfusion conformation. For PIV1, PIV2, and PIV4, we also obtained stabilized prefusion Fs, for which prefusion versus postfusion titers were 2- to 20-fold higher. Elicited murine responses were PIV type-specific, with little cross-neutralization of other PIVs. In nonhuman primates (NHPs), quadrivalent immunization with prefusion-stabilized Fs from PIV1–4 consistently induced potent neutralizing responses against all four PIVs. For PIV3, the average elicited NHP titer from the quadrivalent immunization was more than fivefold higher than any titer observed in a cohort of over 100 human adults, highlighting the ability of a prefusion-stabilized immunogen to elicit especially potent neutralization.

Antigen multimerization on a nanoparticle can result in improved neutralizing antibody responses. A platform that has been successfully used for displaying antigens from a number of different viruses is ferritin, a self-assembling protein nanoparticle that allows the attachment of multiple copies (24 monomers or 8 trimers) of a single antigen. Here, we design two-component ferritin variants that allow the attachment of two different antigens on a single particle in a defined ratio and geometric pattern. The two-component ferritin was specifically designed for trimeric antigens, accepting four trimers per particle for each antigen, and was tested with antigens derived from HIV-1 envelope (Env) and influenza hemagglutinin (HA). Particle formation and the presence of native-like antigen conformation were confirmed through negative-stain electron microscopy and antibody-antigen binding analysis. Immunizations in guinea pigs with two-component ferritin particles, displaying diverse Env, HA, or both antigens, elicited neutralizing antibody responses against the respective viruses. The results provide proof-of-principle for the self-assembly of a two-component nanoparticle as a general technology for multimeric presentation of trimeric antigens.

A central goal of HIV-1 vaccine research is the elicitation of antibodies capable of neutralizing diverse primary isolates of HIV-1. Here we show that focusing the immune response to exposed N-terminal residues of the fusion peptide, a critical component of the viral entry machinery and the epitope of antibodies elicited by HIV-1 infection, through immunization with fusion peptide-coupled carriers and prefusion stabilized envelope trimers, induces cross-clade neutralizing responses. In mice, these immunogens elicited monoclonal antibodies capable of neutralizing up to 31% of a cross-clade panel of 208 HIV-1 strains. Crystal and cryoelectron microscopy structures of these antibodies revealed fusion peptide conformational diversity as a molecular explanation for the cross-clade neutralization. Immunization of guinea pigs and rhesus macaques induced similarly broad fusion peptide-directed neutralizing responses, suggesting translatability. The N terminus of the HIV-1 fusion peptide is thus a promising target of vaccine efforts aimed at eliciting broadly neutralizing antibodies. An alternative HIV vaccine design facilitates generation of HIV-1-antibodies, with promising neutralization breadth in rodents and nonhuman primates.

Cryo-EM analyses of the initial contact of the HIV-1 Env trimer with the CD4 receptor reveal that CD4 interacts with two gp120 protomers; these quaternary contacts are important for viral infectivity. Binding of the gp120 envelope (Env) glycoprotein to the CD4 receptor is the first step in the HIV-1 infectious cycle. Although the CD4-binding site has been extensively characterized, the initial receptor interaction has been difficult to study because of major CD4-induced structural rearrangements. Here we used cryogenic electron microscopy (cryo-EM) to visualize the initial contact of CD4 with the HIV-1 Env trimer at 6.8-A resolution. A single CD4 molecule is embraced by a quaternary HIV-1–Env surface formed by coalescence of the previously defined CD4-contact region with a second CD4-binding site (CD4-BS2) in the inner domain of a neighboring gp120 protomer. Disruption of CD4-BS2 destabilized CD4-trimer interaction and abrogated HIV-1 infectivity by preventing the acquisition of coreceptor-binding competence. A corresponding reduction in HIV-1 infectivity occurred after the mutation of CD4 residues that interact with CD4-BS2. Our results document the critical role of quaternary interactions in the initial HIV-Env-receptor contact, with implications for treatment and vaccine design.

Ligand affinities can be optimized by interfacial cavity filling. A hollow (Phe43 cavity) between HIV-1 surface glycoprotein (gp120) and cluster of differentiation 4 (CD4) receptor extends beyond residue phenylalanine 43 of CD4 and cannot be fully accessed by natural amino acids. To increase HIV-1 gp120 affinity for a family of CD4-mimetic miniproteins (miniCD4s), we targeted the gp120 Phe43 cavity with 11 non-natural phenylalanine derivatives, introduced into a miniCD4 named M48 (1). The best derivative, named M48U12 (13), bound HIV-1 YU2 gp120 with 8 pM affinity and showed potent HIV-1 neutralization. It contained a methylcyclohexyl derivative of 4-aminophenylalanine, and its cocrystal structure with gp120 revealed the cyclohexane ring buried within the gp120 hydrophobic core but able to assume multiple orientations in the binding pocket, and the aniline nitrogen potentially providing a focus for further improvement. Altogether, the results provide a framework for filling the interfacial Phe43 cavity to enhance miniCD4 affinity.

Tyrosine sulfate-mediated interactions play an important role in HIV-1 entry. After engaging the CD4 receptor at the cell surface, the HIV-1 gp120 glycoprotein binds to the CCR5 co-receptor via an interaction that requires two tyrosine sulfates, at positions 10 and 14 in the CCR5-N terminus. Building on previous structure determinations of this interaction, here we report the targeting of these tyrosine sulfate binding sites for drug design through in silico screening of small molecule libraries, identification of lead compounds, and characterization of biological activity. A class of tyrosine sulfate-mimicking small molecules containing a "phenyl sulfonate-linker-aromatic" motif was identified that specifically inhibited binding of gp120 to the CCR5-N terminus as well as to sulfated antibodies that recognize the co-receptor binding region on gp120. The most potent of these compounds bound gp120 with low micromolar affinity and its CD4-induced conformation with K(D)'s as tight as ∼50 nM. Neutralization experiments suggested the targeted site to be conformationally inaccessible prior to CD4 engagement. Primary HIV-1 isolates were weakly neutralized, preincubation with soluble CD4 enhanced neutralization, and engineered isolates with increased dependence on the N terminus of CCR5 or with reduced conformational barriers were neutralized with IC(50) values as low as ∼1 μM. These results reveal the potential of targeting the tyrosine sulfate interactions of HIV-1 and provide insight into how mechanistic barriers, evolved by HIV-1 to evade antibody recognition, also restrict small-molecule-mediated neutralization.

The HIV-1 co-receptor CCR5 possesses sulfo-tyrosine (TYS) residues at its N-terminus (Nt) that are required for binding HIV-1 gp120 and mediating viral entry. By using a 14-residue fragment of CCR5 Nt containing two TYS residues, we recently showed that CCR5 Nt binds gp120 through a conserved region specific for TYS moieties and suggested that this site may represent a target for inhibitors and probes of HIV-1 entry. As peptides containing sulfo-tyrosines are difficult to synthesize and handle due to limited stability of the sulfo-ester moiety, we have now incorporated TYS isosteres into CCR5 Nt analogs and assessed their binding to a complex of gp120–CD4 using saturation transfer difference (STD) NMR and surface plasmon resonance (SPR). STD enhancements for CCR5 Nt peptides containing tyrosine sulfonate (TYSN) in complex with gp120–CD4 were very similar to those observed for sulfated CCR5 Nt peptides indicating comparable modes of binding. STD enhancements for phosphotyrosine-containing CCR5 Nt analogs were greatly diminished consistent with earlier findings showing sulfo-tyrosine to be essential for CCR5 Nt binding to gp120. Tyrosine sulfonate-containing CCR5 peptides exhibited reduced water solubility, limiting their use in assay and probe development. To improve solubility, we designed, synthesized, and incorporated in CCR5 Nt peptide analogs an orthogonally functionalized azido tris (ethylenoxy) l -alanine ( l - ate -Ala) residue. Through NMR and SPR experiments, we show a 19-residue TYSN-containing peptide to be a functional, hydrolytically stable CCR5 Nt isostere that was in turn used to develop both SPR-based and ELISA assays to screen for inhibitors of CCR5 binding to gp120–CD4.

SummaryThe site on the HIV-1 gp120 glycoprotein that binds the CD4 receptor is recognized by broadly reactive antibodies, several of which neutralize over 90% of HIV-1 strains. To understand how antibodies achieve such neutralization, we isolated CD4-binding-site (CD4bs) antibodies and analyzed 16 co-crystal structures –8 determined here– of CD4bs antibodies from 14 donors. The 16 antibodies segregated by recognition mode and developmental ontogeny into two types: CDR H3-dominated and VH-gene-restricted. Both could achieve greater than 80% neutralization breadth, and both could develop in the same donor. Although paratope chemistries differed, all 16 gp120-CD4bs antibody complexes showed geometric similarity, with antibody-neutralization breadth correlating with antibody-angle of approach relative to the most effective antibody of each type. The repertoire for effective recognition of the CD4 supersite thus comprises antibodies with distinct paratopes arrayed about two optimal geometric orientations, one achieved by CDR H3 ontogenies and the other achieved by VH-gene-restricted ontogenies.

The HIV-1 gp120 envelope (Env) glycoprotein mediates attachment of virus to human target cells that display requisite receptors, CD4 and co-receptor, generally CCR5. Despite high-affinity interactions with host receptors and proof-of-principle by the drug maraviroc that interference with CCR5 provides therapeutic benefit, no licensed drug currently targets gp120.An overview of the role of gp120 in HIV-1 entry and of sites of potential gp120 vulnerability to therapeutic inhibition is presented. Viral defenses that protect these sites and turn gp120 into a moving labyrinth are discussed together with strategies for circumventing these defenses to allow therapeutic targeting of gp120 sites of vulnerability.The gp120 envelope glycoprotein interacts with host proteins through multiple interfaces and has conserved structural features at these interaction sites. In spite of this, targeting gp120 for therapeutic purposes is challenging. Env mechanisms that have evolved to evade the humoral immune response also shield it from potential therapeutics. Nevertheless, substantial progress has been made in understanding HIV-1 gp120 structure and its interactions with host receptors, and in developing therapeutic leads that potently neutralize diverse HIV-1 strains. Synergies between advances in understanding, needs for therapeutics against novel viral targets and characteristics of breadth and potency for a number of gp120-targetting lead molecules bodes well for gp120 as a HIV-1 therapeutic target.

Formylmethanofuran:tetrahydromethanopterin formyltransferase is an essential enzyme in the one-carbon metabolism of methanogenic and sulfate-reducing archaea and of methylotrophic bacteria. The enzyme, which is devoid of a prosthetic group, catalyzes the reversible formyl transfer between the two substrates coenzyme methanofuran and coenzyme tetrahydromethanopterin (H 4 MPT) in a ternary complex catalytic mechanism. The structure of the formyltransferase without its coenzymes has been determined earlier. We report here the structure of the enzyme in complex with both coenzymes at a resolution of 2.0 A. Methanofuran, characterized for the first time in an enzyme structure, is embedded in an elongated cleft at the homodimer interface and fixed by multiple hydrophobic interactions. In contrast, tetrahydromethanopterin is only weakly bound in a shallow and wide cleft that provides two binding sites. It is assumed that the binding of the bulky coenzymes induces conformational changes of the polypeptide in the range of 3 A that close the H 4 MPT binding cleft and position the reactive groups of both substrates optimally for the reaction. The key residue for substrate binding and catalysis is the strictly conserved Glu245. Glu245, embedded in a hydrophobic region and completely buried upon tetrahydromethanopterin binding, is presumably protonated prior to the reaction and is thus able to stabilize the tetrahedral oxyanion intermediate generated by the nucleophilic attack of the N 5 atom of tetrahydromethanopterin onto the formyl carbon atom of formylmethanofuran.

Tetrahydromethanopterin (H4 MPT) is a tetrahydrofolate analogue involved as a C1 carrier in the metabolism of various groups of microorganisms. How H4MPT is bound to the respective C1 unit converting enzymes remained elusive. We describe here the structure of the homopentameric formaldehyde-activating enzyme (Fae) from Methylobacterium extorquens AM1 established at 2.0 angstrom without and at 1.9 angstrom with methylene-H4MPT bound. Methylene-H4MPT is bound in an "S"-shaped conformation into the cleft formed between two adjacent subunits. Coenzyme binding is accompanied by side chain rearrangements up to 5 angstrom and leads to a rigidification of the C-terminal arm, a formation of a new hydrophobic cluster, and an inversion of the amide side chain of Gln88. Methylene-H4MPT in Fae shows a characteristic kink between the tetrahydropyrazine and the imidazolidine rings of 70 degrees that is more pronounced than that reported for free methylene-H4MPT in solution (50 degrees). Fae is an essential enzyme for energy metabolism and formaldehyde detoxification of this bacterium and catalyzes the formation of methylene-H4MPT from H4MPT and formaldehyde. The molecular mechanism ofthis reaction involving His22 as acid catalyst is discussed.

Lipase from Bacillus subtilis is a "lidless" lipase that does not show interfacial activation. Due to exposure of the active site to solvent, the lipase tends to aggregate. We have investigated the solution properties and unfolding of the lipase in guanidinium chloride (GdmCl) to understand its aggregation behavior and stability. Dynamic light scattering (DLS), near- and far-UV circular dichroism, activity and intrinsic fluorescence of lipase suggest that the protein undergoes unfolding between 1 M and 2 M GdmCl. The polarity sensitive dye, 1,1',-bis-(4anilino)naphthalene-5,5"-disulfonic acid (bis-ANS), a probe for hydrophobic pockets, binds cooperatively to the native lipase. An intermediate populated in 1.75 M GdmCl that strongly binds bis-ANS was identified. Tendency of the native protein to aggregate in solution and specific binding to bis-ANS confirms that the lipase has exposed hydrophobic pockets and this surface hydrophobicity strongly influences the unfolding pathway of the lipase in GdmCl.

Substrates insoluble in water are often presented to enzymes in micellized form. We observed anomalous increases in activities of lipases, with p-nitrophenyl oleate (PNPO)−Triton X-100 mixed micelles as the substrate system, in the presence of the protein denaturant guanidinium chloride (GdmCl). However, with the water-soluble substrate p-nitrophenyl acetate (PNPA), the activity of the lipases decreased with increasing concentrations of GdmCl. Since chaotropes are known to affect micellar systems, we investigated the effects of GdmCl on the structure of the micelles and on the reactivity of PNPO present in mixed micellar form with Triton X-100. GdmCl does not affect the nonenzymatic hydrolysis rate of the water-soluble substrate PNPA substantially; however, the hydrolysis of PNPO is enhanced 74-fold on increasing GdmCl concentration from 0 to 6 M. This is accompanied by a 50% decrease in hydrodynamic radius of the micelles and a 25 times increase in critical micellar concentration. Polarity measurements a...

Nat. Struct. Mol. Biol. 24, 370–378 (2017); published online 20 February 2017; corrected after print 27 April 2017 In the version of this article initially published, funding information for B.C. and C.S.P. was missing NIH grant S10 OD019994-01. In addition, there was an incorrect comma in the introduction (after “glycoprotein” in the sentence “Upon binding to the primary cellular receptor, CD4, the external gp120 Env glycoprotein undergoes major conformational changes.

The conserved HIV-1 site of coreceptor binding is protected from antibody-directed neutralization by conformational and steric restrictions. While inaccessible to most human antibodies, the coreceptor site has been shown to be accessed by antibody fragments. In this study, we used X-ray crystallography, surface plasmon resonance, and pseudovirus neutralization to characterize the gp120-envelope glycoprotein recognition and HIV-1 neutralization of a heavy chain-only llama antibody, named JM4. We describe full-length IgG2b and IgG3 versions of JM4 that target the coreceptor-binding site and potently neutralize over 95% of circulating HIV-1 isolates. Contrary to established trends that show improved access to the coreceptor-binding region by smaller antibody fragments, the single-domain (VHH) version of JM4 neutralized less well than the full-length IgG2b version of JM4. The crystal structure at 2.1-Å resolution of VHH JM4 bound to HIV-1 YU2 gp120 stabilized in the CD4-bound state by the CD4-mimetic miniprotein, M48U1, revealed a JM4 epitope that combined regions of coreceptor recognition (including the gp120 bridging sheet, V3 loop, and β19 strand) with gp120 structural elements involved in recognition of CD4 such as the CD4-binding loop. The structure of JM4 with gp120 thus defines a novel CD4-induced site of vulnerability involving elements of both coreceptor- and CD4-binding sites. The potently neutralizing JM4 IgG2b antibody that targets this newly defined site of vulnerability adds to the expanding repertoire of broadly neutralizing antibodies that effectively neutralize HIV-1 and thereby potentially provides a new template for vaccine development and target for HIV-1 therapy.

Summary The interface between the HIV-1 gp120 envelope glycoprotein and the CD4 receptor contains an unusual interfacial cavity, the "Phe43 cavity", which CD4-mimetic miniproteins with nonnatural extensions can potentially utilize to enhance their neutralization of HIV-1. Here, we report cocrystal structures of HIV-1 gp120 with miniproteins M48U1 and M48U7, which insert cyclohexylmethoxy and 5-hydroxypentylmethoxy extensions, respectively, into the Phe43 cavity. Both inserts displayed flexibility and hydrophobic interactions, but the M48U1 insert showed better shape complementarity with the Phe43 cavity than the M48U7 insert. Subtle alteration in the gp120 conformation played a substantial role in optimizing fit. With M48U1, these translated into a YU2-gp120 affinity of 0.015 nM and neutralization of all 180 circulating HIV-1 strains tested, except clade-A/E isolates with noncanonical Phe43 cavities. Ligand chemistry, shape complementarity, surface burial, and gp120 conformation act in concert to modulate binding of ligands to the gp120-Phe43 cavity and, when optimized, can effect near-pan-neutralization of HIV-1.

To initiate HIV entry, the HIV envelope protein gp120 must engage its primary receptor CD4 and a coreceptor CCR5 or CXCR4. In the absence of a high resolution structure of a gp120-coreceptor complex, biochemical studies of CCR5 have revealed the importance of its N terminus and second extracellular loop (ECL2) in binding gp120 and mediating viral entry. Using a panel of synthetic CCR5 ECL2-derived peptides, we show that the C-terminal portion of ECL2 (2C, comprising amino acids Cys-178 to Lys-191) inhibit HIV-1 entry of both CCR5- and CXCR4-using isolates at low micromolar concentrations. In functional viral assays, these peptides inhibited HIV-1 entry in a CD4-independent manner. Neutralization assays designed to measure the effects of CCR5 ECL2 peptides when combined with either with the small molecule CD4 mimetic NBD-556, soluble CD4, or the CCR5 N terminus showed additive inhibition for each, indicating that ECL2 binds gp120 at a site distinct from that of N terminus and acts independently of CD4. Using saturation transfer difference NMR, we determined the region of CCR5 ECL2 used for binding gp120, showed that it can bind to gp120 from both R5 and X4 isolates, and demonstrated that the peptide interacts with a CD4-gp120 complex in a similar manner as to gp120 alone. As the CCR5 N terminus-gp120 interactions are dependent on CD4 activation, our data suggest that gp120 has separate binding sites for the CCR5 N terminus and ECL2, the ECL2 binding site is present prior to CD4 engagement, and it is conserved across CCR5- and CXCR4-using strains. These peptides may serve as a starting point for the design of inhibitors with broad spectrum anti-HIV activity.

Background HIV-1 enters cells by sequentially binding the CD4 receptor and a coreceptor, either CCR5 or CXCR4. Functional constraints result in a high degree of conservation of the receptor-binding sites making them potential targets for intervention. The coreceptor-binding site on HIV-1 envelope gp120 glycoprotein is protected from the humoral immune system by conformational masking and steric occlusion. The site becomes available after a conformational change in gp120 following CD4 engagement, but at that point in the entry process, the proximity of the viral and cellular membranes makes the site inaccessible to bulky antibody molecules. Thus, in spite of being highly conserved, this region has not been considered a viable vaccine target.

The CCR5 co-receptor binds to the HIV-1 gp120 envelope glycoprotein and facilitates HIV-1 entry into cells. Its N terminus is tyrosine-sulfated, as are many antibodies that react with the co-receptor binding site on gp120. We applied nuclear magnetic resonance and crystallographic techniques to analyze the structure of the CCR5 N terminus and that of the tyrosine-sulfated antibody 412d in complex with gp120 and CD4. The conformations of tyrosine-sulfated regions of CCR5 (α-helix) and 412d (extended loop) are surprisingly different. Nonetheless, a critical sulfotyrosine on CCR5 and on 412d induces similar structural rearrangements in gp120. These results now provide a framework for understanding HIV-1 interactions with the CCR5 N terminus during viral entry and define a conserved site on gp120, whose recognition of sulfotyrosine engenders posttranslational mimicry by the immune system.

Understanding the structural basis of altered properties of proteins due to changes in temperature or pH provides useful insights in designing proteins with improved stability. Here we report the basis for the pH-dependent thermostability of the Bacillus subtilis lipase (Lip A) using spectroscopic and X-ray crystallographic studies. At pH values above 7, lipase denatures and aggregates when heated at temperatures above 45 degrees C. However, at pH below 6 lipase denatures upon heating but the activity and its native structure is completely recovered upon cooling. In order to obtain the structural basis of this unusual stability of lipase, we determined high-resolution crystal structures of the lipase in two different crystal forms at pH 4.5 and 5. These structures show linear oligomerization of lipase using only two types of dimeric associations and these inter-molecular interactions are completely absent in several crystal forms of wild-type and mutant proteins obtained at basic pH. In accordance with the crystallographic studies, spectroscopic investigations reveal an invariant secondary structure in the pH range of 4-10. Quaternary organization of lipase at low pH resulted in changes in the tryptophan environment and binding of 1-anilino-8-naphthalene sulfate (ANS) at low pH. Low pH stability of the lipase is not observed in the presence of sodium chloride (>0.2 M) indicating the importance of ionic interactions at low pH. Inter- and intra-molecular ionic interactions that occur at pH below 6.0 are proposed to trap the molecule in a conformation that allows its complete refolding upon cooling.

A new and convenient method for the in vitro recombination of single point mutations is presented. This method efficiently reduces the introduction of novel point mutations, which usually occur during recombination processes. A multiplex polymerase chain reaction (multiplex-PCR) generates gene fragments that contain preformed point mutations. These fragments are subsequently assembled into full-length genes by a recombination-PCR step. The process of multiplex-PCR-based recombination (MUPREC) does not require DNase I digestion for gene-fragmentation and is therefore easy to perform, even with small amounts of target DNA. The protocol yields high frequencies of recombination without creating a wild-type background. Furthermore, the low error rate results in high-quality variant libraries of true recombinants, thereby minimizing the screening efforts and saving time and money. The MUPREC method was used in the directed evolution of a Bacillus subtilis lipase that can catalyse the enantioselective hydrolysis of a model meso-compound. Thereby, the method was proved to be useful in producing a reliable second-generation library of true recombinants from which better performing variants were identified by using a high-throughput electrospray ionization mass spectrometry (ESI-MS) screening system.

Background The design of gp120 monomeric probes with modified antigenic profiles that are specific for a target epitope has been successfully used for the isolation of broadly neutralizing HIV-1 antibodies. Existing probes, however, do not possess sufficient specificity and can bind antibodies with undesired properties (e.g., weakly neutralizing antibodies targeting an overlapping epitope). To achieve improved epitope specificity, positive and negative design stages can be incorporated into the probe design process.