Search

The analysis of microplastics is mainly performed using Fourier transformation infrared spectroscopy/microscopy (FTIR/ μFTIR). However, in contrast to most aspects of the analysis process, for example, sampling, sample preparation, and measurement, there is less known about data evaluation. This particularly critical step becomes more and more important if a large number of samples has to be handled. In this context, it is concerning that the commonly used library searching is not suitable to identify microplastics from real environmental samples automatically. Therefore, many spectra have to be rechecked by the operator manually, which is very time-consuming. In this study, a new fully automated robust microplastics identification method is presented that assigns over 98% of microplastics correctly. The main concept of this new method is to detect and numerically describe the individual vibrational bands within an FTIR absorbance spectrum by curve fitting, which leads to a very compact and highly characteristic peak list. This list allows very accurate and robust library searching. The developed approach is based on the already published microplastics identification algorithm (μIDENT) and extends and improves the field of application to μFTIR data with a special focus on relevant broad, overlapped, or complex vibrational bands.

The objective of this study is to evaluate and compare the mechanical and water-related properties of WPC containing two types of recovered wood particles. These particles were obtained by thermo-hydro-mechanical and sole mechanical (milling) disintegration and compared to virgin wood fibres. The respective composites were produced with and without maleic anhydride-grafted polypropylene (MAPP) as a coupling agent. The results clearly show that both types of particles, which derive from end-of-life MDF are a suitable resource to produce WPC. The physico-mechanical characteristics of the WPC containing particles from thermo-hydro-mechanical disintegration were statistically better than those containing mechanically produced particles.

In recent years, awareness regarding sustainability and the responsible usage of natural resources has become more important in our modern society. As a result, wood as a building material experiences a renaissance. However, depending on the use case, protective measures may be necessary to increase wood’s durability and prolong its service life. The chemical vapor deposition (CVD) of parylene-N layers offers an interesting alternative to solvent-based and potentially environmentally harmful coating processes. The CVD process utilized in this study generated transparent, uniform barrier layers and can be applied on an extensive range of substrates without the involvement of any solvents. In this study, European beech wood samples (Fagus sylvatica L.) were coated with parylene-N using the CVD process, with paracyclophane as a precursor. The aim of the study was to analyze the water absorption of beech wood, in relation to the different layer thicknesses of parylene-N. Therefore, four different coating thicknesses from 0.5 to 40 μm were deposited, depending on the initial amount of precursor used. The deposited layers were analyzed by reflection interference spectroscopy and scanning electron microscopy, and their chemical structures and compositions were investigated by X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy. Due to the chemical structure of parylene-N, the deposited layers led to a significantly increased water contact angle and reduced the water uptake by 25–34% compared to the uncoated reference samples. A linear correlation between layer thickness and water absorption was observed. The coating of wood with parylene-N provides a promising water barrier, even with thin layers.

In contrast to conventional coating processes such as varnishing, plasma powder deposition by means of an atmospheric pressure plasma jet on wood is not yet widely used. A key advantage of this process is that volatile organic compounds and organic solvents are avoided. In the present work, European beech (Fagus sylvatica L.) and pine sapwood (Pinus sylvestris L.) were coated with polymer (polyester), metal (aluminum coated silver) or metal oxide (bismuth oxide) particles. Furthermore, a layer system consisting of polyester and metal or metal oxide was investigated. The layer thickness and topography were analyzed with a laser scanning microscope and scanning electron microscope, revealing thicknesses of 2&ndash, 22 &micro, m depending on the coating material. In general, the chemical composition of the layers was determined using X-ray photoelectron spectroscopy and Fourier-transform infrared spectroscopy measurements. The coatings consisting of metal and metal oxide showed a band gap and plasmon resonance in the range of 540 and 450 nm. Through this absorption, the wood may be protected against ultraviolet (UV) radiation. In the water uptake and release tests, the polyester layers exhibited a reduction of water vapor absorption after 24 h in 100% relative humidity (RH) by 53%&ndash, 66%, whereas the pure metal oxide layers indicated the best desorption performance. The combination of metal oxide and polyester in the one-layer system combines the protection properties of the single coatings against water vapor and UV radiation.

In this study, various wood material sources were used for the manufacture of wood-polymer composites (WPC). The materials were categorised as virgin wood particles (VWP), reprocessed WPC particles (RWP) and recycled thermoset composite particles (RCP) and derived from two virgin wood sources, three-layer particleboards, medium-density fibreboards (MDF) boards, or two different wood/polypropylene composites. All produced wood-polypropylene compounds contained 60% wood material and were manufactured using a co-rotating extruder. Malleated polypropylene was used as a coupling agent. Specimens were injection moulded and subsequently tested for their physico-mechanical properties. To characterize particles before and after processing, dynamic image analysis (DIA) measurement were performed. Additionally, X-ray micro-computed tomography (X&micro, CT) was used to characterize the internal structure of the composites and to verify the obtained particle&rsquo, s characteristics. It was found that length and aspect ratio of particles were remarkably different before and after processing (loss in length of 15&ndash, 70% and aspect ratio of 10&ndash, 40%). Moreover, there were notably differences between the particle sources (RCP retained the highest length and aspect ratio values, followed by VWP and RWP). The results suggest that increased aspect ratios can indeed significantly improve mechanical properties (up to 300% increase in impact bending strength and 75% increase in tensile strength, comparing WPC based either on virgin spruce or MDF material). This phenomenon is suggested to be partially superimposed by improved dispersion of particles, which is expected due to lower variance and increased mechanical properties of RWP composites. However, no notable alterations were observed for composite density. Reprocessed WPC and, particularly, RCP material have proved to be an appealing raw material substitute for the manufacturing of wood&ndash, polymer composites.