Search

This study developed a new method for the extraction, clean up, chiral separation, and determination of five pairs of phenothiazine drugs using ultrasound-assisted dispersive liquid–liquid microextraction combined with capillary electrophoresis (CE). A mixture of extraction solvent (30 μL of CHCl3) and dispersive solvent (200 μL of tetrahydrofuran) was rapidly injected using a syringe, which formed tiny cloudy droplets of an organic extractant that dispersed entirely into the aqueous phase. After centrifuging, the sediment phase of volume 60 ± 0.5 μL was transferred into a small vial and evaporated to dryness. The residue was reconstituted in 5 μL of aqueous solution, analyzed using CE and then successfully baseline separated in 6 min using a background electrolyte composed of 5 mM hydroxypropyl-γ-cyclodextrin, 0.9% poly(diallyldimethylammonium chloride), and 150 mM tris-formate at pH 3.0. The developed method was linear in the 0.01–10 μM range, with R2 ≥ 0.9956 for all target analytes. The limit of detection (S/N = 3) and the limit of quantification (S/N = 10) were 2–4 nM and 10 nM, respectively. Excellent repeatability (RSD ≤ 5.5%, n = 5) was achieved. The recoveries of all phenothiazine drugs from urine were in the 83.5–104.0% range. The advantages of this approach were low cost, versatility, simplicity, and high sensitivity.

A sensitive technique for the measurement of warfarin and its metabolic enantiomers in human fluids such as urine and serum technique was developed by applying ultrasound-assisted dispersive liquid-liquid microextraction linked with poly(ethylene oxide)-mediated stacking in capillary electrophoresis. The parameters that influence extraction and stacking performance-the type of the extraction and dispersive solvents and their volume, extraction time, salt additives, sample matrix, solution pH, and the composition of background electrolyte stacking-were carefully studied and optimized based on the considering of obtaining the best detection sensitivity. Under the optimal extraction (30 μL C2H2Cl4 and 200 μL tetrahydrofuran in 1 mL of sample solution) and separation (0.5% PEO, 200 mM Tris-borate, pH 8.5, and 5 mM dimethyl-β-cyclodextrin) conditions, the enrichment factors of D-/L-warfarins and D-/L-7-OH warfarins covered from 1758 to 1859 and their limits of detection ranged from 0.34 to 0.38 nM. Calibration-related results exhibited acceptable linearity with the coefficient of determination higher than 0.99; the relative standard deviations of the peak area were determined to 4.1%–6.3% (n = 3). The recovery of four separated analytes spiked in samples of urine and serum was found to be 93%–110% and 95%–109%, respectively. We revealed that ultrasound-assisted dispersive liquid-liquid microextraction with poly(ethylene oxide)-mediated stacking in capillary electrophoresis could be a prompt and practical method for quantifying the levels of warfarin and its metabolic enantiomers in real-world samples, especially in biological fluids.

Citrate-capped gold nanoparticles (AuNPs) modified with thrombin-binding aptamer are often implemented for colorimetric, fluorescent, and electrochemical detection of thrombin in an aqueous solution. However, researchers have rarely explored the application of fibrinogen-modified AuNPs (F-AuNPs) for thrombin sensing. We present a simple, inexpensive, sensitive, and selective probe for colorimetric assay of thrombin through combining thrombin-induced inclusion of F-AuNPs into Fibrin and F-AuNPs-catalyzed reduction of 4-nitrophenol with an excess amount of NaBH4. Considering that fibrinogen stabilized citrate-capped AuNPs against a high-ionic-strength buffer, F-AuNPs efficiently catalyzed the NaBH4-mediated decrease of yellow 4-nitrophenol to colorless 4-aminophenol. The presence of thrombin converted fibrinogen into fibrin on the nanoparticle surface, leading to the inclusion of nanoparticles into fibrin. The formation of fibrin inhibited that the AuNPs catalyzed the NaBH4-mediated reduction of 4-nitrophenol. Consequently, the color of the solution gradually varied from colorless to yellow with increasing thrombin concentration. The proposed system was shown to be accurate in the quantification of small differences in the concentration of human thrombin over the range of 4–60 pM. The lowest detectable concentration of human thrombin by the naked eye was as low as 16 pM. We demonstrated the practical application of the proposed system in quantifying 1–15 nM human thrombin in human plasma.

Pesticides are a family of non-biodegradable chemical compounds which widely used in agriculture to control pests and increase yield production. However, overuse or abuse of pesticides and their metabolites may cause potential toxicity for the environment as well as human health and all other living organisms, even at deficient concentrations. Consequently, the development of sensors for monitoring these compounds is significant. Recently, nanoparticles-based sensors have been extensively employed as a potential alternative or complementary analytical tool to conventional detection methods for pesticides. Among them, gold nanoparticles (AuNPs) owing to their unique optical properties have been developed as smart sensors with high selectivity, sensitivity, simplicity, and portability. These comprehensive reviews have summarized various studies performed based on different detection strategies, i.e., colorimetric, fluorescence, surface-enhanced Raman scattering, and electrochemical, using AuNPs as sensing probes for pesticide analysis in various matrices. Additionally, the current challenges and future trends for developing novel AuNPs-based sensors for the detection of pesticides are also discussed.

By p-doping buckminsterfullerene (C60) into a bipolar host 2,7-bis(diphenylphos-phorryl)-9-[4-(N,N-dipheny-lamino)phenyl]-9-phenylfluorene, the device efficiency of the phosphorescent homojunction organic light-emitting device (HJOLED) was pronouncedly enhanced. A two-fold enhancement in luminous efficacy compared with nondoped or MoO3 doped HJOLEDs was observed by employing C60 as the p-dopant. The influence of C60 doping on the device performances of this HJOLED was investigated by carefully analyzing the J-V-L characteristics of HJOLEDs with different hole transporting layer. A white HJOLED was also successfully fabricated. The maximum brightness, current efficiency and power efficiency were 22700 cd m−2, 12.2 cd A−1 and 7.7 lm W, respectively. This device showed a warm EL spectra and the CIE coordinates was (0.41, 0.44) @ 10 V. Besides, this device manifested lower efficiency roll-off.

This study developed a sensitive method involving capillary electrophoresis (CE) coupled with ultraviolet absorption for the simultaneous separation of chiral phenothiazine drugs at nanomolar concentration levels. The method consists of hydroxypropyl-γ-cyclodextrin (Hp-γ-CD) as a chiral selector and poly (diallyldimethylammonium chloride) (PDDAC)-based CE. Five pairs of d,l-phenothiazines were baseline separated using a background electrolyte containing 0.9% PDDAC, 5 mM Hp-γ-CD, and 100 mM tris(hydroxymethyl)aminomethane (Tris)-formate (pH 3.0). The five pairs were successfully stacked on the basis of the difference in viscosity between the PDDAC-containing background electrolyte and the sample solution, with almost no loss of resolution. The combination of a solid-phase extraction and PDDAC-mediated CE can efficiently improve the sensitivity of the phenothiazine enantiomers. Under optimal conditions, calibration graphs displayed the linear range between 6 and 1500 nM, with relative standard deviation values lower than 3.5% (n = 5). Detection limit ranged from 2.1 to 6.3 nM for target analytes, and 607- to 1555-fold enhancement was achieved. The practicality of using the proposed method to determine five pairs of d,l-phenothiazines in urine is also validated, in which recoveries between recoveries of all phenothiazines from urine ranged from 89% to 101%. Keywords: Capillary electrophoresis, Chiral separation, On-line concentration, Phenothiazine, Solid phase extraction

An experimental trial was conducted to investigate the effects of high dietary starch levels on growth, hepatic glucose metabolism enzyme, antioxidant capacity and immune responses of largemouth bass, Micropterus salmoides. Fish (initial body weight: 16.9 ± 0.24 g) were fed three isonitrogenous and isoenergetic semi-purified diets containing 5%, 10% and 20% wheat starch, respectively. The results indicated that fish fed 5% and 10% starch diets showed significantly better weight gain, specific growth rate (SGR), protein efficiency ratio (PER) and feed conversion ratio (FCR) compared with that fed 20% starch diet. Meanwhile, fish fed 20% starch diet had a significantly higher hepatic glycogen and muscle glycogen contents than those fed the other diets. The alanine amiotransferase (ALT) and aspartate transaminase (AST) activities, glucose and insulin contents in plasma increased significantly with dietary starch levels, whereas triglyceride content showed the opposite trend. In addition, the highest glucokinase (GK), pyruvate kinase (PK) and phosphofructokinase (PFK) activities in liver were also observed in fish fed 20% starch diet. However, both fructose-1,6-bisphosphatase (FBPase) and pyruvate carboxylase (PC) activities in liver decreased significantly as dietary starch levels increased. Moreover, the lower superoxide dismutase (SOD) and catalase (CAT), the higher malondialdehyde (MDA) contents in liver were observed in fish fed 20% starch diets. Compared to the 5% and 10% starch, the 20% starch could enhance the content of plasma nitric oxide (NO) and the activities of inducible nitric oxide synthase (iNOS) and alkaline phosphatase (ALP). Results demonstrate that the starch levels may affect growth performance and metabolic changes, which suggest that high-starch diets were inefficiently used as an energy source by M. salmoides juveniles. Excessive dietary starch contents could result in oxidative stress, suppress innate immunity, and thus affect the health status of M. salmoides.

Separation techniques are promising for the detection of adamantane analogs with various functional groups. The derivatization of adamantane analogs with chromophores or fluorophores should be conducted using a separation technique combined with a common ultraviolet–visible or fluorescence detector. However, limited research has been conducted on underivatized adamantane analogs. Therefore, we present a highly rapid and sensitive method for detecting underivatized adamantane analogs by integrating ultrasound-assisted dispersive liquid–liquid microextraction (UADLLME), field-amplified sample stacking (FASS)-related capillary electrophoresis (CE), and capacitively coupled contactless conductivity detection (C4D). In the proposed system, UADLLME is used for sample clean up and analyte enrichment, whereas FASS-related CE provides on-line concentration of underivatized adamantane analogs during CE separation. A mixture of memantine (MT), amantadine (AT), and rimantadine (RT) was separated at baseline within 8 min through the application of optimized UADLLME (mixing extraction solvent, 50 μL of 1,1,2,2-tetrachloroethane (C2H2Cl4) and dispersive solvent, 200 μL of acetonitrile; mixing solution was injected into 1 mL of the sample solution at pH 12.5), FASS (buffer, 1.5 M acetic acid; additive, 0.05 mM β-cyclodextrin; pH 2.5), and C4D (amplitude, 2 Vpp; frequency, 500 kHz). The calibration curve exhibited acceptable linearity, with a coefficient of determination higher than 0.99. The limits of detection (signal-to-noise ratio of 3) were estimated to be 0.9, 1.0, and 1.2 nM for MT, AT, and RT, respectively. The relative standard deviations of peak areas varied from 8.9% to 9.3% (n = 5), whereas the sensitivity improvement of three underivatized adamantane analogs ranged from 1342 to 1766. The feasibility and accuracy of the present method for the determination of MT, AT, and RT in human serum and urine was satisfactorily confirmed by the excellent recovery and relative error. The proposed method exhibited high enrichment factors and offers excellent precision, high accuracy, and a short analysis time.

The 1986 Food Research Institute-Tanaka et al. model predicts the safety of shelf-stable process cheese spread formulations using the parameters of moisture, pH, NaCl, and disodium phosphate (DSP) to inhibit toxin production by Clostridium botulinum. Although this model is very reliable for predicting safety for standard-of-identity spreads, the effects of additional factors have not been considered. The objective of this study was to create a predictive model to include the interactive effect of moisture, pH, fat, sorbic acid, and potassium-based replacements for NaCl and DSP to reflect modern reduced-sodium recipes. Eighty formulations were identified using a central composite design targeting seven factors: 50 to 60% moisture, pH 5.4 to 6.2, 0 to 0.2% sorbic acid, 10 to 30% fat, 1.7 to 2.4% NaCl, 0.8 to 1.6% DSP, and 0 to 50% potassium replacement for sodium salts. Samples were inoculated with proteolytic C. botulinum spores at 3 log spores per g, hot filled into sterile vials, and stored anaerobically at 27°C. Samples were assayed at 0, 1, 2, 3, 4, 8.5, 17.5, 26, and 40 weeks for the presence of botulinum toxin using the mouse bioassay. A parametric survival model was fit to the censored time-to-toxin data. All linear, quadratic, and pairwise effects were considered for model fit. As hypothesized, the effects of pH, sorbate, moisture, DSP, and NaCl were highly significant (P < 0.001). Fat concentration and potassium replacement effects were significant at P < 0.021 and P < 0.057, respectively. The model consistently predicted the safety failure of the toxic samples, but it also predicted failure for some samples that were not toxic. This model is an adjunct to existing models by adding the factors of potassium salts, fat, and sorbic acid to predict the botulinal safety of prepared process cheese products but is not intended to be a substitute for formulation evaluation by a competent process authority.

A rapid, simple, and sensitive technique for the quantitative detection of fluoxetine and norfluoxetine enantiomers in biological fluids was developed based on the combination of field-amplified sample stacking (FASS)–related capillary electrophoresis (CE) with ultrasound-assisted dispersive liquid–liquid microextraction (UA-DLLME). The extraction efficiency of UA-DLLME was strongly related to extraction time, salt concentration, type of extraction and dispersion solvents, and volume of extraction and dispersion solvents. The extracted fluoxetine and norfluoxetine enantiomers in a mixture of 50% methanol and 50% deionized water were efficiently stacked using FASS and then separated using cyclodextrin-modified CE. Under optimal conditions of FASS (chiral selector, 3 mM trimethyl-β-cyclodextrin; and background electrolyte, 100 mM phosphate buffer) and UA-DLLME (extraction solvent, 200 μL of acetone; and dispersed solvent, 50 μL of C2H2Cl4 in 1 mL of the sample solution), the obtained enrichment factors of fluoxetine and norfluoxetine enantiomers reached approximately 2000. The linear ranges for the quantification of fluoxetine and norfluoxetine enantiomers were 0.3–150 and 0.6–150 nM, respectively. The relative standard deviations in peak areas and migration time for four analytes were less than 3.3% and 6.3%, respectively. The proposed system provided limits of detection (signal-to-noise ratio of 3) for four analytes corresponding to 0.1 nM. The precision and accuracy for urine and serum samples were less than 6.8 and 8.3%, respectively. These findings suggested that the proposed system exhibited a high potential for the reliable determination of fluoxetine and norfluoxetine enantiomers in clinical samples.

Unique functional nanomaterials as electroactive media for efficiently electrochemical biosensing have always been an ever-increasing topic in biotechnology and environmental fields. In this study, we report a simple sacrificial template-guided polymerization strategy to fabricate ultrathin two-dimensional (2D) polyaniline (PANI) nanosheets for electrochemical detection of dopamine (DA). By using vanadium pentoxide nanosheets as both sacrificial templates and oxidants, the resulting PANI nanosheets show an ultrathin thickness of ca. 4 nm with a favorable electrical conductivity of ca. 10 S cm−1. Furthermore, PANI nanosheets have been modified on a glass carbon electrode for highly sensitive DA detection. The proposed DA sensor delivers a linear range of 0.5–300 μM with a low detection limit of 0.118 μM (S/N = 3). In addition, the as-fabricated electrochemical sensor exhibits an outstanding selectivity, stability, reproducibility, and repeatability, enabling its feasible application for DA detection in real samples. Therefore, the ultrathin PANI nanosheets reported here are good candidates as electrodes for the sensitive and selective DA detection.

Dispersive liquid-liquid microextraction was combined with acetonitrile stacking in capillary electrophoresis for the identification of three selective serotonin reuptake inhibitors (citalopram, fluoxetine, and fluvoxamine) in human fluids such as urine and plasma. Parameters that affect the extraction and stacking efficiency, such as the type and volume of the extraction and disperser solvent, extraction time, salt addition for dispersive liquid-liquid microextraction, and sample matrices, pH, and concentration of the separation buffer for stacking, were investigated and optimized. Under optimum conditions, the enrichment factors were in the range of 1195-1441. Limits of detection ranged from 1.4 to 1.7 nM for the target analytes. Calibration graphs displayed satisfied linearity with R2 greater than or equal to 0.9978, and relative standard deviations of the peak area analysis were in the range of 2.9-5.0% (n = 3). The recoveries of all tricyclic antidepressant drugs from urine and plasma were in the range of 77-117 and 79-106%, respectively. The findings of this study show that dispersive liquid-liquid microextraction acetonitrile-stacking capillary electrophoresis is a rapid and convenient method for identifying tricyclic antidepressant drugs in urine and plasma.

Cyclic diadenylate monophosphate (c-di-AMP) and P1,P5-diadenosine-5′ pentaphosphate (Ap5A) have been determined to play important roles in bacterial physiological processes and human metabolism, respectively. However, few, if any, methods have been developed that use fluorescent sensors to sense c-di-AMP and Ap5A in the real world. To address this challenge, this study presents a fast, convenient, selective, and sensitive assay for quantifying c-di-AMP and Ap5A fluorescence based on the competitive binding of diadenosine nucleotides and a polyadenosine probe to coralyne. The designed probe consists of a 20-mer adenosine base (A20), a fluorophore unit at the 5′-end, and a quencher unit at the 3′-end. Through A2–coralyne–A2 coordination, coralyne causes a change in the conformation of A20 from that of a random coil to a folded structure, thus enabling the fluorophore to be close to the quencher. As a result, fluorescence quenching occurs between the two organic dyes. When the A20·coralyne probe encounters t...

Herein m-phenylenediamine was employed as the introduced polar groups reagent to prepare a novel amino-modified hyper-cross-linked resin (MPDAMR) by two successive Friedel–Crafts reactions. The adsorption capacities of MPDAMR for two chloroanilines in aqueous solution were compared with two commercial resins (macroporous resin XAD-4 and hyper-cross-linked resin NDA150) and its precursor (post-cross-linked resin, PCLR). MPDAMR possessed high BET surface area (1040.7 m2/g), abundant micropores, and plentiful amino groups. The adsorption efficiencies of 4-chloroaniline (4-CA) and 2,4-dichloroaniline (2,4-DCA) by MPDAMR were 78.7% and 97.8%, respectively, which were much higher than that of XAD-4, NDA150, and PCLR. The excellent adsorption capacity of MPDAMR for chloroanilines was attributed to its high surface area, abundant micropores, primary amine driven enhanced polarity, and π–π stacking interactions. Pseudo first-order kinetics equation and Freundlich equation were capable of explaining the adsorption process of chloroanilines onto MPDAMR. Both the intraparticle diffusion and film diffusion were rate-controlling steps. The thermodynamics results attested that the adsorption of chloroanilines was a spontaneous exothermic process. The saturated adsorption capacities of MPDAMR for 4-CA and 2,4-DCA were 213.8 mg/g and 278.4 mg/g dry resin, respectively. Additionally, MPDAMR had good regenerated adsorption capacity after five adsorption-desorption cycles. Thus, MPDAMR was a potential adsorbent used to remove chloroaniline compounds from industrial effluent.

The development of simple and effective approaches for the synthesis of bimetallic oxide heterojunction photocatalyst which are used to activate peroxymonosulfate (PMS) under visible-light-driven is highly feasible but remains a great challenge. In this work, the Co3O4/CeO2 composite was prepared by a facile chemical reaction, followed by annealing in a muffle furnace and then applied to activate PMS for ciprofloxacin (CIP) degradation. Various characterizations confirmed the formation of p-n heterojunction between Co3O4 and CeO2. Meanwhile, the 5 wt% Co3O4/CeO2/PMS composite showed highest degradation rate of CIP (87.8%) under visible light irradiation. The obtained Co3O4/CeO2/PMS system still exhibited a good catalytic performance in presence of different anion. Besides, the active radical h+, OH, O2−, and SO4− are involved in CIP degradation. The excellent degradation performance can be interpreted as the synergistic effect between Co3O4/CeO2 heterojunction photocatalyst and PMS activation. Moreover, the energy band structure and valence band deviation of Co3O4/CeO2 p-n heterogeneous junction were confirmed. This work would give a reference for combining the photocatalyst and activation of PMS under visible light for further removal of pollutants.

A rapid, simple and sensitive method for the detection of piperazinyl phenothiazine drugs using dispersive liquid-liquid microextraction (DLLME) combined with field-amplified sample stacking (FASS) in CE was developed. Sensitivity parameters that affect the extraction and FASS efficiency, such as the type and volume of disperser solvent, extraction time, addition of salt, and efficiency of FASS, were investigated and optimized. Note that the conductivity ratio between BGE and sample zone was measured to be 2300. Under optimal extraction and stacking conditions, the calibration curve, which ranged from 0.3 to 160 ng/mL, demonstrated good linearity with a correlation coefficient r≧ 0.9900. The LODs of prochlorperazine (Pcp), trifluoperazine (Tfp), perphenazine (Ppa), and fluphenazine (Fpa) at an S/N of 3 were 0.1, 0.1, 0.07, and 0.08 ng/mL, respectively. An approximately 1000-fold to 2500-fold improvement in sensitivity was achieved for the four tested analytes compared to conventional CZE without DLLME. The recoveries of all phenothiazines in urine and plasma ranged from 85.7 to 107.6% and 95.6 to 105.4%, respectively. The proposed method was demonstrated to be a rapid and convenient method for the determination of four piperazinyl phenothiazine drugs in human urine and plasma.

High-speed capillary electrophoresis (CE) enables the simple, rapid, and inexpensive analysis of large sets of chiral samples in the pharmaceutical industry. Hence, we developed a novel method for separating enantiomers of d,L-phenothiazines simply and rapidly, based on using poly(diallyldimethylammonium chloride) (PDDAC) as an additive and hydroxypropyl-γ-cyclodextrin (Hp-γ-CD) as a chiral selector in capillary electrophoresis. Adding 0.9% PDDAC to the background electrolyte generated a stable, high, and reversed electroosmotic flow (EOF). Hp-γ-CD not only worked as a complexing agent to increase the chiral resolution between d,L-phenothiazines but also decreased the effective electrophoretic mobility of these drugs. Combining PDDAC and Hp-γ-CD as buffer additives enabled CE to achieve a high-speed enantioseparation of five pairs of d,L-phenothiazines. A decrease in capillary length and an increase in the intensity of the electric field further shortened the separation time. When the background electrolyte contained 0.9% PDDAC, 5mM Hp-γ-CD, and 75 mM formic acid (pH 3.0), enantioseparation of the d,L-phenothiazines was attained within 230 s by applying a capillary length of 32.5 cm and an electric field of 292 V cm(-1). The limit of detection (LOD) of the d,L-phenothiazines at a signal-to-noise ratio of 3 ranged from 2 to 8 μM. We demonstrated the feasibility of this method by detecting the five pairs of d,L-phenothiazines in urine samples.

In this study, we aimed to study the role of growth factor receptor-bound protein 2 (Grb2) in palmitic acid-induced steatosis and other "fatty liver" symptoms in vitro. HepG2 cells, with or without stably suppressed Grb2 expression, were incubated with palmitic acid for 24 h to induce typical clinical "fatty liver" features, including steatosis, impaired glucose metabolism, oxidative stress, and apoptosis. MTT and Oil Red O assays were applied to test cell viability and fat deposition, respectively. Glucose uptake assay was used to evaluate the glucose utilization of cells. Quantitative polymerase chain reaction and Western blot were used to measure expressional changes of key markers of insulin signaling, lipid/glucose metabolism, oxidative stress, and apoptosis. After 24-h palmitic acid induction, increased fat accumulation, reduced glucose uptake, impaired insulin signaling, enhanced oxidative stress, and increased apoptosis were observed in HepG2 cells. Suppression of Grb2 in HepG2 significantly reduced fat accumulation, improved glucose metabolism, ameliorated oxidative stress, and restored the activity of insulin receptor substrate-1/Akt and MEK/ERK pathways. In addition, Grb2 deficiency attenuated hepatic apoptosis shown by reduced activation of caspase-3 and fluorescent staining. Modulation of Bcl-2 and Bak1 also contributed to reduced apoptosis. In conclusion, suppression of Grb2 expression in HepG2 cells improved hepatic steatosis, glucose metabolism, oxidative stress, and apoptosis induced by palmitic acid incubation partly though modulating the insulin signaling pathway.

KMT5A (known as PR-Set7/9, SETD8 and SET8), a member of the SET domain containing methyltransferase family specifically targeting H4K20 for methylation, has been implicated in multiple biological processes. In the present study, we identified that KMT5A was elevated in 50 pairs of papillary thyroid cancer tissue samples and in cell lines K1 and TPC-1 by qRT-PCR and western blotting, as well as by immunohistochemical staining. CCK-8 assay and flow cytometric analysis revealed that inhibition of KMT5A attenuated proliferation and induced apoptosis. Transwell assays revealed that cell migration and invasion were suppressed in KMT5A-knockdown cells. Moreover, the inhibition of KMT5A arrested the cell cycle in the G1/S phase of papillary thyroid cancer cells. The TCGA data revealed that elevated KMT5A expression was significantly correlated with extrathyroidal extension, lymph node metastasis and advanced pathological stage of papillary thyroid cancer. Furthermore, we observed that inhibition of KMT5A suppressed the expression of SREBP1, SCD, FASN and ACC, key molecules involved in lipid metabolism and decreased the level of malondialdehyde in papillary thyroid cancer cells. In conclusion, KMT5A may be a novel oncogenic factor, specifically a regulator for lipid metabolism in papillary thyroid carcinoma.

A MoS 2 -containing oxide coating on Ti6Al4V alloywas prepared by one-step plasma electrolytic oxidation (PEO) process in a MoS 2 -dispersed phosphate electrolyte. The composition and microstructure of the oxide coatings produced in the electrolytes with and without the addition of MoS 2 were analyzed by X-ray diffractometer (XRD), scanning electron microscope (SEM) and energy dispersive X-ray spectroscopy (EDS). Results showed that the MoS 2 particles can be successfully incorporated into the oxide coating during the PEO process and were preferentially located in the micropores. The ball-on-disk sliding tests indicated that MoS 2 -containing oxide coating registered much lower friction coefficient and wear rate than the oxide coating without MoS 2 under dry sliding condition. The improved tribological property of the MoS 2 -containing oxide coating was also discussed.

Metal nanocluster-based nanomaterials for the simultaneous determination of temperature and pH variations in micro-environments are still a challenge. In this study, we develop a dual-emission fluorescent probe consisting of bovine serum albumin-stabilized gold nanoclusters (BSA-AuNCs) and fluorescein-5-isothiocyanate (FITC) as temperature- and pH-responsive fluorescence signals. Under single wavelength excitation the FITC/BSA-AuNCs exhibited well-separated dual emission bands at 525 and 670 nm. When FITC was used as a reference fluorophore, FITC/BSA-AuNCs showed a good linear response over the temperature range 1-71 °C and offered temperature-independent spectral shifts, temperature accuracy, activation energy, and reusability. The possible mechanism for high temperature-induced fluorescence quenching of FITC/BSA-AuNCs could be attributed to a weakening of the Au-S bond, thereby lowering the charge transfer from BSA to AuNCs. Additionally, the pH- and temperature-responsive properties of FITC/BSA-AuNCs allow simultaneous temperature sensing from 21 to 41 °C (at intervals of 5 °C) and pH from 6.0 to 8.0 (at intervals of 0.5 pH unit), facilitating the construction of two-input AND logic gates. Three-input AND logic gates were also designed using temperature, pH, and trypsin as inputs. The practicality of using FITC/BSA-AuNCs to determine the temperature and pH changes in HeLa cells is also validated.

This paper presents on-line simultaneous concentration and separation of cationic and anionic neurochemicals by capillary electrophoresis (CE) with UV absorbance spectroscopy. Neurochemical stacking exploits differences in local electric field and viscosity between the sample zone and the background electrolyte (BGE). To achieve these discontinuous conditions for CE, neurochemicals were prepared in a solution containing 1 mM formic acid and 20% (v/v) acetonitrile (ACN). The capillary was filled with a solution of 500 mM Tris–borate (TB) and 10% (v/v) glycerol. The buffer vial contained 500 mM TB and 0.5% (v/v) polyethylene oxide (PEO). After injecting a large sample volume, PEO enters the capillary by electro-osmotic flow (EOF). Anionic neurochemicals stacked at the sample zone and PEO-containing BGE boundary. Simultaneously, cationic neurochemicals were concentrated at the boundary between the sample zone and the glycerol-containing BGE. The concentrated cationic neurochemicals were baseline separated in the presence of glycerol, mainly due to hydrogen bonding interactions between glycerol hydroxyl groups and the neurochemical's hydroxyl and amino groups. Under optimal stacking conditions, we observed the following: (a) the maximum sample injection volume was 720 nL; (b) the limit of detection for signal-to-noise ratio of 3 ranged from 14.7 to 313.4 nM; and (c) sensitivity enhancements compared to normal injection (15 nL) ranged from 116 to 281-fold. We evaluated the proposed method by the determination of neurochemicals in urine samples.

This study combines Tween 20-capped gold nanoparticles (Tween 20-AuNPs) with capillary electrophoresis (CE) for ultrasensitive detection of thiol-containing peptides, including glutathione (GSH), γ-glutamylcysteine (γ-GCS), and phytochelatin analogs. By forming Au S bonds, Tween 20-AuNPs can selectively extract and enrich these thiols from a complicated matrix. A Tween 20 capping layer not only suppresses nonspecific adsorption, but also enables NPs to disperse in a highly salinity solution. Dithiothreitol removes thiol-containing peptides from the NP surface through ligand exchange. The released peptides are selectively derivatized with o-phthaldialdehyde (OPA) to form tricyclic isoindole derivatives. Extraction efficiency of five thiol-containing peptides with Tween 20-AuNPs was highly reliable in the Tween 20-AuNP concentration, time of extraction and desorption thiols, and sample volume. After injecting a large sample volume, the OPA-derivatized peptides migrate against the electroosmotic flow (EOF) and enter the polyethylene oxide (PEO) zone. The sensitivity of these peptides was improved by stacking them at the boundary between the sample and PEO zones. As a result, limits of detection (LODs) for five peptides were down to 0.1–6 pM. Not only is the proposed method probably the first CE example for detecting dissolved thiols in seawater; it also has the lowest LODs for GSH, γ-GCS, and phytochelatins compared to other reported methods.

We describe the stacking and separation of d- and l-aspartic acid (Asp) by capillary electrophoresis (CE) with light-emitting diode-induced fluorescence detection (LEDIF). In the presence of cyanide, d- and l-Asp were derivatized with naphthalene-2,3-dicarboxaldehyde (NDA) to form fluorescent derivatives prior to CE-LEDIF. The separation of NDA-derivatized d- and l-Asp was accomplished using a discontinuous system - buffer vials contained a solution of 0.6% poly(ethylene oxide) (PEO), 150 mM sodium dodecyl sulfate (SDS), and 60mM hydroxypropyl-β-cyclodextrin (Hp-β-CD), while a capillary was filled with a solution of 150 mM SDS and 60mM Hp-β-CD. The role of PEO, Hp-β-CD, and SDS is to act as a concentrating media, as a chiral selector, and as a pseudostationary phase, respectively. This discontinuous system could be employed for the stacking of 600 nL of NDA-derivatized d- and l-Asp without the loss of chiral resolution. The stacking mechanism is mainly based on the difference in viscosity between sample zone and PEO as well as SDS sweeping. The limits of detection at signal-to-noise of 3 for d- and l-Asp were down to 2.4 and 2.5 × 10(-10)M, respectively. Compared to normal sample injection volume (25 nL), this stacking approach provided a 100- and 110-fold improvement in the sensitivity of d- and l-Asp, respectively. This method was further applied for determining d- and l-Asp in cerebrospinal fluid, soymilk, and beer.

We report a novel means for chiral separation and stacking of amino acids by MEKC with LED-induced fluorescence detection. Naphthalene-2,3-dicarboxaldehyde, hydroxypropyl-beta-cyclodextrin (Hp-beta-CD), SDS, and poly(ethylene oxide) (PEO) serve as a derivatized agent, chiral selector, pseudostationary phase, and concentrated medium, in sequence. To improve speed, resolution, and stacking efficiency, the analysis of chiral amino acids was performed under discontinuous conditions--the capillary was filled with a solution of 100 mM Tris-borate, 150 mM SDS, and 50 mM Hp-beta-CD, whereas buffer vials contain 20 mM Tris-borate, 150 mM SDS, 50 mM Hp-beta-CD, and 0.5% w/v PEO. A solution of nonionic PEO enters the capillary with the help of EOF during the separation. Through interaction of SDS micelles/Hp-beta-CD and chiral amino acid, the negatively charged complexes migrated into the PEO solution and stacked at the boundary between the sample zone and the PEO solution. Compared with normal sample injection (10 nL sample volume), a several hundred-fold sensitivity improvement for chiral amino acids was obtained under the injection of 270 nL sample volume (30% of the capillary volume). Meanwhile, the LOD at S/N of three for DL-amino acids were in the range of 0.18-0.22 nM. The proposed method has been applied for the determination of DL-leucine in urine and plasma samples.

Angiotensin II type 1 receptor (AT1R) blockers (ARBs) have been shown to reduce the incidence of type 2 diabetes mellitus; however, the underlying molecular mechanism is unknown. Peroxisome proliferator-activated receptor γ (PPARγ) is the central regulator of insulin and glucose metabolism, which improves insulin sensitivity. Whether candesartan cilexetil, as a prodrug of the AT1R blocker candesartan, has PPARγ-activating properties remains to be elucidated. The aim of the present study was to investigate the effects of oral administration of candesartan cilexetil on glucose tolerance and the actions of PPARγ on liver and adipose tissue in the insulin-resistant obese rat induced by high-fat diet. Animals treated with candesartan cilexetil showed an improved glucose tolerance after oral glucose challenge. Whole-body insulin sensitivity was evaluated using the hyperinsulinemic-euglycemic clamp technique. During high-fat feeding in high-fat diet (HF) rats, the glucose infusion rate (GIR) was 52.3% lower than that in normal chow (NC) rats. However, the GIR was significantly enhanced following candesartan cilexetil treatment. Angiotensin II receptor antagonism also resulted in significant increases in PPARγ protein expression in adipose and liver tissue. These results indicate that PPARγ activation by candesartan cilexetil may provide novel therapeutic options in the treatment of patients with metabolic syndrome.

A micellar electrokinetic capillary chromatography (MEKC) method, using UV detection, was developed for the determination of polyphenols in Toona sinensis (Meliaceae); the procedure involved precipitation of polyphenols from the leaves of T. sinensis using methanol. The structures can be established with fifteen compounds including methyl gallate, gallic acid, kaempferol, quercitin, quercitrin, rutin, kaempferol-glucoside, catechin, epicatechin, stearic acid, palmitic acid, β-sitosterol, stigmasterol, β-sitosteryl-glucoside, and stigmasteryl-glucoside by spectroscopic analysis. However, there has been no investigation to quantitate the polyphenols that form T. sinensis. Thus, seven polyphenols of T. sinensis with UV absorbance, catechin (C), epicatechin (EC), methyl gallate (MG), rutin (R), gallic acid (G), quercitrin (Q), and kaempferol (K) were separated within 10 min with a 40 cm uncoated fused-silica column, with the RSD < 3% (migration times), voltage at 15 kV using this method. On-column detection was carried out at 254 nm. The detection limit of this method for all analytes ranged from 19.5 to 0.02 μM (RSD < 3.1%). The method provided a rapid and sensitive identification of polyphenols of interest in T. sinensis and is suitable for biological activity studies.

In this paper, we describe a method for analyzing large-volume protein samples using capillary electrophoresis in conjunction with laser-induced fluorescence detection (CE-LIF). To improve the stacking and separation efficiencies of proteins, we added either 0.01% sodium dodecyl sulfate (SDS) or 0.01% poly(ethylene oxide) (PEO) to the Tris-borate solutions (pH 10.0) used to prepare the protein samples. After injection of the large-volume samples (ca. 1.0 microL, 0.1 microM), the proteins migrate against the electroosmotic flow (EOF) and enter the PEO zone; this process causes them to slow and stack at the boundary between the PEO and sample zones. As a result, the limits of detection (LODs) at a signal-to-noise (S/N) of 3 for most proteins are sub-nM to several nM. For instance, the LOD (S/N = 3) for alpha-lactalbumin is 0.48 nM, which is an 84-fold sensitivity enhancement over the traditional method. By applying a short plug of 0.2% SDS prior to sample injection, a greater number of peaks, representing the microheterogeneity of the proteins, were resolved and the stacking efficiency of the proteins increased slightly. This method allowed us to detect 12 peaks when injecting a large volume of sample containing six model proteins (0.1 microM). We also analyzed the microheterogeneities of the proteins by using CE with UV-Vis absorption detection when injecting a large volume of sample containing six model proteins (1.0 microM) in the presence of a 1.0% SDS plug. The practical method is validated by the detection of human serum albumin in a urine sample, obtained from a healthy female, without sample pretreatment; its concentration was 0.18 microM. We further demonstrate the capability of this method to detect low amounts of proteins through the detection of 45 nM hemoglobin after injecting ca. 1.0 microL of ultradilute lysed red blood cells. The experimental results indicate that our proposed method has great potential for use in diagnosis and proteomics applications.

This paper describes a simple, sensitive, efficient, and rapid method for simultaneous analysis of biologically active amines and acids by capillary electrophoresis in conjunction with laser-induced native fluorescence detection (CE-LINF) using a diode pumped solid state nanolaser at 266 nm. In order to optimize resolution of the amines that were prepared in 10.0 mM formate-Tris (FT) solutions, 10.0 mM FT solutions with and without containing halides were used to fill the capillary and reservoirs, respectively. The electrophoretic mobilities of tryptamine (TA) and serotonin (5-HT) at pH 4.0 decrease with the increase in halide concentration (0-10.0 mM). Taken together with a great effect of iodide than other halides, we suggest that the formation of ion pairs is a main contributor for altering the migration of the amines. In order to simultaneously analyze the amines and their metabolites (acids) at low pH, a high bulk EOF is required. The analysis of 10 anlytes including amines and acids was completed within 12 min by CE-LINF using a capillary treated with 0.5M NaOH and then filled with 10.0 mM FT solutions (pH 4.0) containing 10.0 mM KCl prior to analysis. The limits of detection for TA and 5-hydroxyindole-3-acetic acid (5-HIAA) are 0.12 and 6.0 nM, respectively. The present method has been further validated by analyzing urine samples, with an RSD less than 3.1% (migration times) and 3.9% (concentration).

To investigate the effects of saturated free fatty acid, palmitic acid (PA), on hepatocytes, we administered PA to rat hepatocytes. We demonstrated that PA inhibited the cell growth as a dose- and time-dependent manner in rat hepatocytes. PA-induced morphological changes including swelling, membrane dissolution and formation of debris, and apoptosis with appearance of sub-G1 fraction determined by cell cycle analysis after treatment for 4 days. The level of Bcl-2 was slightly decreased, in contrast, the level of Bax elevated markedly, which resulted in a significant decrease of Bcl-2/Bax ratio after PA treatment on HepG2 cells. These findings demonstrated that PA induces cell death on hepatocytes, perhaps via mitochondria-mediated apoptosis. Furthermore, the present study indicates that PA's cell toxicity may play important roles in the transition from steatosis to steatohepatitis in human especially with obesity.

This paper describes the synthesis of core-shell CdSe/CdS quantum dots (QDs) in aqueous solution by a simple photoassisted method. CdSe was prepared from cadmium nitrate and 1,1-dimethylselenourea precursors under illumination for up to 3 h using a pulsed Nd:YAG laser at 532 nm. The effects that the temperature and the laser irradiation process have on the synthesis of CdSe were monitored by a series of experiments using the precursors at a Cd:Se concentration ratio of 4. Upon increasing the temperature (80-140 degrees C), the size of the CdSe QDs increases and the time required for reaching a maximum photoluminescence (PL) is shortened. Although the as-prepared CdSe QDs possess greater quantum yields (up to 0.072%) compared to those obtained by microwave heating (0.016%), they still fluoresce only weakly. After passivation of CdSe (prepared at 80 degrees C) by CdS using thioacetamide as the S source (Se:S concentration ratio of 1) at 80 degrees C for 24 h, the quantum yield of the core-shell CdSe/CdS QDs at 603 nm is 2.4%. Under UV irradiation of CdSe/CdS for 24 h using a 100-W Hg-Xe lamp, the maximum quantum yield of the stable QDs is 60% at 589 nm. A small bandwidth (W1/2 < 35 nm) indicates the narrow size distribution of the as-prepared core-shell CdSe/CdS QDs. This simple photoassisted method also allows the preparation of differently sized (3.7-6.3-nm diameters) core-shell CdSe/CdS QDs that emit in a wide range (from green to red) when excited at 480 nm.

A novel type of chiral molecular clefts has been designed and synthesized by linking an unsymmetrically disubstituted urea to methyl deoxycholate via a carbonate chain. The structures of these new receptors 3a–d were confirmed by 1H NMR, IR, MS spectra, and Elemental analysis.

A partially filling technique for the analysis of DNA markers and polymerase chain reaction (PCR) products by capillary electrophoresis in the presence of electroosmotic flow using polymer solutions is presented. Either after or prior to the sample injection, a plug of salts at high pH was hydrodynamically injected. During the separation, poly(ethylene oxide) (PEO) solution entered the capillary. We have found that the position, length, and composition of the plugs affect the sensitivity, resolution, and speed on the analysis of PhiX-174/HaeIII DNA restriction fragments or a DNA mixture (pBR 322/HaeIII digest, pBR 328/BglI digest and pBR 328/HinfI digest) with different degrees. Through careful evaluation of the impact of anions and cations on the analysis of DNA, we have suggested that the optimal condition is applying a plug consisting of 32 mM NaCl and 0.01 M NaOH at 30 cm height for 60 s after sample injection. In the presence of such a plug, PEO adsorption reduces, and thus the separation is faster, as well as the sensitivity improves. Using this condition, the analysis of a DNA mixture (injected at 30 cm for 360 s) containing ten different PCR products amplified after 17 cycles was complete in 25 min. About a 2000-fold improvement in the sensitivity was achieved when compared to that by a conventional method (10 s injection) without applying a plug.

Digital Rock Physics (DRP) has significantly evolved in the last few years and added invaluable contributions in improving core characterization and in providing high quality advanced SCAL measurements, emphasized through various studies/papers (SCA-2012–03 Kalam et al). This paper represents a unique DRP SCAL study that includes primary drainage capillary pressure (Pc) as part of Swi establishment and relative permeability (Kr) measurements done on four whole core (WC) samples from two different carbonate formations with a stylolite layer in between. The aim of the study was to evaluate how DRP results would compare with physical SCAL measurements done – on the same WC samples as a composite, as well as on plug samples from the same formations/layers – in a leading international core analysis lab in USA. The DRP results were up-scaled to the individual WC level and compared with the SCAL results from the corresponding layers. The DRP technology in this study also provided the capability of up-scaling the results to the WC composite which was used by the lab to assess the effect of the stylolite layer on the water flood. The comparison showed excellent matches between the physical and DRP-derived Pc and Kr data. The paper outlines the DRP methods used to determine the SCAL properties of the three formations. The laboratory measurements of SCAL properties took six years while the DRP work that followed blindly (without any knowledge of the laboratory results) was completed in six months. This demonstrates the effectiveness of the DRP technology in providing high quality SCAL data in a timely fashion regardless of sample size. Impact of possible wettability changes and sensitivities on one of the WC composite constituent component was also easily established unlike the high risk laboratory tests. This is the first water-oil displacement validation study results on reservoir whole cores of four inch diameter at full reservoir conditions using DRP.

We report concentration and separation of DNA in the presence of electroosmotic flow (EOF) using poly(ethylene oxide) (PEO) solution. DNA fragments migrating against EOF stacked between the sample zone and PEO solution. To maximize the injection volume, several factors, such as concentrations of Tris-borate (TB) buffer and PEO solution, capillary size, and matrix, were carefully evaluated. The use of 25 mM TB buffers, pH 10.0, containing suitable amounts (less than 10 mM) of salts, such as sodium chloride, sodium phosphate, and sodium acetate, to prepare DNA is essential for the concentration of large-volume samples. In the presence of salts, the peaks also became sharper and the fluorescence intensity of DNA complexes increased. Using 2.5% PEO and a 150 microm capillary filled with 400 mM TB buffer, pH 10.0, up to 5 microL DNA samples (phiX 174 RF DNA-HaeIII digest or the mixture of pBR 322/HaeIII, pBR 328/Bg/I, and pBR 328/HinfI digests) have been analyzed, resulting in more than 400-fold improvements in the sensitivity compared to that by conventional injections (ca. 36 nL). Moreover, this method allows the analysis of 3.5 microL PCR products amplified after 17 cycles without any sample pretreatment.

Obesity is associated with insulin resistance and some reproductive abnormalities. Circulating FFAs are often elevated in obese subjects and are also closely linked to insulin resistance. In this study, we demonstrated that saturated FFAs, such as palmitic acid and stearic acid, markedly suppressed the granulosa cell survival in a time- and dose-dependent manner. Polyunsaturated FFA, arachidonic acid, had no effect on the cell survival, even at supraphysiological concentrations. The suppressive effect of saturated FFAs on cell survival was caused by apoptosis, as evidenced by DNA ladder formation and annexin V-EGFP/propidium iodide staining of the cells. The apoptotic effects of palmitic acid and stearic acid were unrelated to the increase of ceramide generation or nitric oxide production and were also completely blocked by Triacsin C, an inhibitor of acylcoenzyme A synthetase. In addition, acylcoenzyme A, pamitoylcoenzyme A, and stearylcoenzyme A markedly suppressed granulosa cell survival, whereas arachidonoylcoenzyme A had no such effect, and this finding was consistent with the effect of the respective FFA form. Surprisingly, arachidonic acid instead showed a protective effect on palmitic acid- and stearic acid-induced cell apoptosis. A Western blot analysis showed the apoptosis of the granulosa cells induced by palmitic acid to be accompanied by the down-regulation of an apoptosis inhibitor, Bcl-2, and the up-regulation of an apoptosis effector, Bax. These results indicate that saturated FFAs induce apoptosis in human granulosa cells caused by the metabolism of the respective acylcoenzyme A form, and the actual composition of circulating FFAs may thus play a critical role in the apoptotic events of human granulosa cells. These effects of FFAs on granulosa cell survival may be a possible mechanism for reproductive abnormalities, such as amenorrhea, which is frequently observed in obese women.

We have demonstrated on-line concentration and separation of DNA in the presence of electroosmotic flow (EOF) using poly(ethylene oxide) (PEO) solutions. After injecting large-volumes DNA samples, PEO solutions entered a capillary filled with 400 mM Tris-borate (TB) buffers by EOF and acted as sieving matrices. DNA fragments stacked between the sample zone and PEO solutions. Because sample matrixes affected PEO adsorption on the capillary wall, leading to changes in EOF, migration time, concentration, and resolving power varied with the injection length. When injecting phiX174 RF DNA-HaeIII digest prepared in 5 mM Tris-HCl buffer, pH 7.0, at 250 V/cm, peak height increased linearly as a function of injection volume up to 0.9 microl (injection time 150 s). The sensitivity improvement was 100-fold compare to that injected at 25 V/cm for 10 s (0.006 microl). When injecting 1.54 microl of GeneScan 1000 ROX, the sensitivity improvement was 265-fold. The sensitivity improvement was 40-fold when injecting 0.17 microl DNA sample containing pBR 322/HaeIII, pBR 328/BglI, and pBR 328/HinfI digests prepared in phosphate-buffered saline. This method allows the analysis of polymerase chain reaction (PCR) products amplified after 17 cycles when injecting 0.32 microl (at 30 cm height for 300 s). The total analysis time was shorter (91.6 min) than that (119.6 min) obtained from injecting PCR products after 32 cycles for 10 s.

Our previous study demonstrated that PPARγ specific ligand troglitazone (TGZ) or RXR specific ligand LG100268 (LG) alone decreased the aromatase activity in cultured human ovarian granulosa cells from pre-ovulatory follicles, and combined treatment caused an even greater reduction in this activity. Since similar manners of effects of TGZ or/and LG on the aromatase activity in human ovarian granulosa cancer cell line were observed, we performed the detailed analysis of the mechanisms of these effects using this cell line. The changes in the aromatase activity were associated with comparable changes in the P450arom mRNA levels based on a RNase protection assay. A nuclear run-on assay indicated the P450arom transcript to decrease by 40 and 66% at 24 and 48 h, respectively, after TGZ plus LG treatment. An RNA stability analysis showed the half-life of P450arom mRNA to decrease from 13 to 9 h after the TGZ plus LG treatment. The inhibitory effect of TGZ plus LG on the aromatase activity and P450arom mRNA may not be mediated by the cAMP-PKA pathway that is usually implicated in the regulation of aromatase activity in granulosa cells: because (1) the aromatase activity stimulated by forskolin was not inhibited by TGZ plus LG; (2) the specific PKA inhibitor H89 could not block the inhibitory effect of TGZ plus LG on the aromatase activity; and (3) the luciferase activity of P450arom promoter II did not decrease by the addition of TGZ and LG in transfected cells either at a basic state or in the states stimulated by forskolin or PGE2, respectively. Taken together, these results indicate that TGZ plus LG inhibited the aromatase activity and also decreased the P450arom mRNA level in granulosa cancer cells, and the loss of P450arom mRNA expression was considered to be due to both the decreased transcription and rapid degradation of its RNA.

We report the separation of polycyclic aromatic hydrocarbons (PAHs) using 0.1% poly(ethylene oxide) (PEO) in micellar electrokinetic chromatography (MEKC). In the presence of PEO, adsorption of PAHs on the capillary wall was reduced, leading to better resolution and reproducibility. Effects of tetrapentylammonium iodide (TPAI), dextran sulfate (DS), methanol, and sodium lauryl sulfate (SDS) on the separation of PAHs were elucidated. In terms of resolution and speed, DS, compared to TPAI, is a better additive for separation of PAHs. When using 0.1% PEO solution containing 45% methanol, 50 mM SDS, and 0.02% DS, separation of 10 PAHs containing 2 to 5 benzene rings was accomplished in less than 12 min at 15 kV in a commercial CE system. The method has also been tested for separating seven PAHs with high quantum yields when excited at 325 nm using a He-Cd laser. Unfortunately, separation of the seven PAHs was not achieved and sensitivity diminished under the same conditions. To optimize sensitivity, resolution and speed, a stepwise technique in MEKC has been proposed. The seven PAHs were resolved in 35 min at 15 kV when separation was performed in 0.1% PEO solution containing 35 mM SDS, 40% methanol and 0.02% DS for 2 min, and subsequently in 0.1% PEO solution containing 20 mM SDS, 50% methanol, and 0.02% DS.

Separations of small ions were carried out under nonequilibrated conditions using capillaries treated with NaOH, HCl, or tris(hydroxymethyl)aminomethane (Tris) prior to analysis. For separations of benzoic acid isomers or acids and amines under weakly acidic conditions, capillaries flushed with 0.1 M NaOH and subsequently with running buffers prior to analysis were used. Separations of six benzoic acid isomers were accomplished in 4 min in 1 mM phosphate buffers, pH 4.01, containing 2.5 mM hydroxypropyl-beta-cyclodextrin. Without additives, the separation of biological amines and acids were also achieved in 10 min at pH 4.01. Capillaries treated with 0.1 M HCl prior to analysis were tested in separations of six phenols in 5 mM Tris solutions at pH 7.0. As a result of small electrophoretic mobilities of phenols against a small electroosmotic flow, resolution was optimized. We also found that reproducibility was improved using capillaries treated with HCl. The relative standard deviations of migration mobility of phenols were less than 1%, which were smaller than those obtained using capillaries treated with 0.1 M NaOH or Tris.

We demonstrated DNA preconcentration and separation in the presence of electroosmotic flow (EOF) using poly(ethylene oxide) (PEO) solutions. After injecting large volumes of DNA samples into a capillary filled with free tris(hydroxymethyl)aminomethane (Tris)-borate (TB) buffers, PEO solutions entered the capillary by EOF and acted as sieving matrices. In contrast to conventional methods (in the absence of EOF), controlling the EOF was also useful for resolution optimization. We have found that PEO adsorption on the capillary wall was more pronounced when low ionic strength buffers were used. Thus, the EOF decreased with increasing injection length, which led to longer migration times and changes in resolution and stacking efficiency. All resolution values were higher than 1.5 when 1.0 microg/mL DNA samples were injected at 240 V/cm for 60 s (0.67 microL). In addition, as low as 0.015 microg/mL DNA samples (an about 66-fold increase in sensitivity) were detected when the injection was performed at 250 V/cm for 60 s.

Ovarian granulosa cells synthesize estrogens from androgens, which are catalyzed by aromatase cytochrome P450 (P450arom). Troglitazone (Tro), one of the insulin-sensitizing compounds, thiazolidinediones (TZDs), is a ligand for peroxisome proliferator activated receptor gamma (PPARgamma) and is effective in the treatment of both non-insulin-dependent diabetes mellitus (NIDDM) as well as polycystic ovary syndrome (PCOS). PPARgamma exerts a transcriptional activity as a PPARgamma:RXR heterodimer. In this study, we investigated the effects of Tro and/or RXR ligand, LG100268 (LG) on the aromatase activity in cultured human ovarian granulosa cells obtained from patients who underwent in vitro fertilization. Human ovarian granulosa cells expressed PPARgamma mRNA assessed by RT-PCR. The treatment of the granulosa cells with Tro for 24 h resulted in a dramatic inhibition of the aromatase activity in a dose-dependent manner. While the treatment with LG alone also inhibited the aromatase activity, the combined treatment with both Tro and LG caused a much more reduction in the aromatase activity. The changes in the aromatase activity by Tro and/or LG were associated with comparable changes in P450arom mRNA assessed by RT-PCR. These results suggest that Tro directly inhibit the aromatase activity in human granulosa cells probably via nuclear receptor system PPARgamma:RXR heterodimer. The findings may provide a biochemical basis for the decrease in the blood concentrations of estrogens which is observed after the in vivo administration of Tro and may also possibly be useful as a novel therapy for estrogen-dependent diseases.

The changes in carotid artery structure during the natural longevity of the Uighurs people were compared with other ethnic groups. The 419 subjects were divided into (1) longevity and (2) older groups as follows: Uighurs longevity group in Hotan (ULH); and Uighurs, Hans and Kazaks older groups in Hotan or Balikun (UOH, HOH, HOB and KOB). The wall thickness of the common carotid artery (CCA) was measured by ultrasonography. Risk factors were evaluated by measuring total cholesterol (T-C), high-density lipoprotein cholesterol (HDL-C), low-density lipoprotein cholesterol (LDL-C), triglyceride (TG) and fasting glucose, and by 24-h ambulatory blood pressure monitoring. Wall thickness and blood pressure were greater in the Balikun groups than in the Hotan groups. The CCA wall was thicker in Uighurs and Kazaks than in Hans, in the ULH than in the UOH. There was no significant difference in blood pressure among the Hotan groups. LDL-C and glucose were higher and HDL-C was lower in the Hotan groups than in the Balikun groups. T-C, LDL-C, TG and glucose were higher in the HOH than in the ULH and UOH. Systolic blood pressure and LDL-C were higher and TG was lower in the KOB than in the HOB. These results suggest that an increased CCA wall thickness can be attributed to age in Hotan, and to a higher blood pressure level in Balikun, and that the higher blood pressure affected the Balikun groups more than the Hotan groups.

Thiazolidinedione (TZD) is known to be a potent activator of peroxisome proliferator-activated receptor γ (PPARγ), a nuclear receptor that constitutes a heterodimer with retinoid X receptor (RXR). Since a considerable amount of PPARγ is expressed in various hematopoietic cells, the present study was undertaken to examine the effect of TZD in the absence or presence of LG100268, an RXR-selective ligand, on a cultured promyelocytic leukemia cell line, HL60. Treatment with TZD (25–50 µM troglitazone or pioglitazone) markedly suppressed cell proliferation of HL60. A cell cycle analysis revealed that the suppressive effect of troglitazone on HL60 cell proliferations was caused by G0/G1 cell cycle arrest as well as by an apoptotic effect. Treatment with the same concentration of troglitazone also induced the monocytic differentiation of HL60 cells. The apoptotic or the differentiating effect of TZD on HL60 cells was synergistically enhanced by the combined treatment with 1 µM LG100268, while LG100268 alone neither had an apoptotic nor a differentiating effect on HL60 cells. These results suggest that these actions are mediated through the nuclear receptor system constituted by the PPARγ: RXR heterodimer.

Dynamic control and pH changes in the system have been utilized for the separation of twelve organic acids in less than 3 min using capillary electrophoresis (CE). High-speed separations of organic acids under weak acidic conditions indicate the existence of high electroosmotic flow (EOF) caused by treatment of the capillaries with 0.1 M NaOH before each separation. However, strong polyprotic acids can only be detected at higher applied voltages with shorter capillaries, since local EOF decreases significantly when migration time increases. In terms of resolution and speed, the optimal voltage is around 20 kV in 22.5-cm capillaries. The effects of the electric field strength and capillary length on the resolution of organic acids have been investigated to show the existence of dynamic flow. For both methods, dynamic flow is of great importance for the enhancement of resolution for stronger acids. On comparing all of the results, the change in voltage is more efficient for improving the separation resolution in this study. More importantly, this new method can be used in any commercial CE instrument because of its features of high resolution, high speed and simplicity.

A new and very simple technique has been developed in capillary zone electrophoresis for the separation of organic acids. In this new method, capillaries were simply treated with 0.1 M NaOH via high pressure for 3 min, then flushed with running buffer solutions via high pressure for 10 s before performing separation. After this treatment, electroosmotic flow (EOF) is higher than electrophoretic mobilities (EPM) of all analytes in weak acidic conditions. Thus, eight organic acids are well separated in less than 7 min at an applied voltage of 22 kV. In addition to significant differences of EPM among analytes in weak acidic conditions, dynamic changes in EOF and pH account for the good separation results. Capillary dimensions, ionic strength and type of buffer solution all show dramatic effects on the separations of organic acids. The results also support the existence of dynamic changes in the system during a run. This new method provides the advantages of reproducibility, speed and simplicity for the separation of organic acids which cannot be easily separated in the range of pH 4–6 by any conventional means.

In addition to their hypotensive properties, angiotensin receptor blockers (ARBs) have been shown to exert clinical antidyslipidemic effects. The mechanism underlying these ARB lipid metabolic effects remains unclear. Some ARBs, for example, telmisartan, activate peroxisome proliferator-activated activated receptor-gamma (PPAR-gamma). We hypothesized that PPAR-gamma-activating ARBs might exert antidyslipidemic effects via PPAR-alpha. In this study, we assessed the effect of telmisartan on the expression of PPAR-alpha and lipoprotein lipase (LPL). PPAR-alpha expression was detected by reverse-transcription polymerase chain reaction and Western blot in HepG2 hepatocytes as well as differentiated C2C12 myocytes treated with increasing concentrations of telmisartan (0.1-10 μmol/L) for 48 h. Results showed that 1 μmol/L and 10 μmol/L telmisartan significantly increased the expression of PPAR-alpha mRNA and protein in HepG2 cells (p 0.01). No effect was shown in differentiated C2C12 cells. Similarly, 1 µmol/L and 10 μmol/L telmisartan significantly increased the expression of LPL mRNA and protein in HepG2 cells (p 0.01), and this increase was significantly (p 0.01) inhibited by the PPAR-alpha-specific antagonist MK886. These results indicate that certain of the antidyslipidemic effects of telmisartan might be mediated via increased PPAR-alpha-dependent induction of LPL expression.