Search

CeO2 is an important energy storage material that can be used in solid fuel cells. Adding citric acid can improve the particle distribution of the pyrolytic preparation of CeO2 inside the reactor. Through Fluent, this paper investigated the pyrolysis preparation of CeO2 with the addition of citric acid by adopting the Eulerian multiphase flow model, component transportation model, and standard k-ε turbulence model. The experimental and simulation results suggest that the addition of citric acid can alter the pressure, temperature, and component distributions inside the reactor. When the mass fraction of O2 is 0.3, the concentration distribution effect of the CeO2 component is optimal and its conversation rate is the highest. When the mass fraction of citric acid is 0.04, the concentration distribution effect of the CeO2 component is the best, as witnessed by the high CeO2 concentration at the exit. It was found that an O2 content of 30 wt % and citric acid content of 4 wt % were optimal operating conditions for this technology.

Large amounts of pickling liquor are produced during the pickling of iron and steel. The Venturi reactor is used during the pyrolysis of pickling liquor to prepare high-purity Fe2O3 particles. Changing the pyrolysis conditions will affect the purity and concentration of Fe2O3 particles. In this paper, physical experiments and numerical simulations were carried out to study the effect of pyrolysis conditions on the Fe2O3 particles, including the pyrolysis temperature, the FeCl2/FeCl3 ratio in the pickling liquor, and the citric acid ratio. The results showed that a product with a higher purity, better crystallinity, and greater concentration was obtained at 923 K. Further increasing the temperature did not change the concentration of Fe2O3 particles. When the ratio of FeCl2/FeCl3 in the pickling liquor was 1:1.5, the maximum concentration of Fe2O3 particles at the outlet was obtained. When the added proportion of citric acid was 1:1, the particle size distribution was more uniform, and when the added proportion was 1:2.5, the maximum concentration of Fe2O3 particles at the outlet was achieved.

Calcium carbonate (CaCO3) whiskers were firstly treated by sodium stearate, and then blended with polypropylene (PP) to prepare the composites by a closely intermeshing co-rotating twin-screw extruder at 200°C. The performance of the composites, such as thermal behavior, microstructure and mechanical properties, were analyzed with differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and mechanical testing. The results showed that CaCO3 whisker influenced the crystalline behavior of PP phase in the blends because of its intervening. Moreover, thermo-decomposing temperature, tensile and bending strengths of the blends all increased with increasing whisker content. CaCO3 whiskers had good reinforcing and toughening effects on PP.