Search

Summary The combination of noninvasive compositional analysis by Raman microspectrometry with high-resolution imaging in the scanning electron microscope greatly expands the analytical capabilities of the electron microscope. However, the chemical preparation of scanning electron microscope (SEM) specimens, although adequate for low-resolution imaging of superficial detail, is not the true representation of the chemistry and composition of the sample, as extraction and aggregation artefacts as a result of dehydrating and cross-linking agents are abundant. The original chemical composition and ultrastructure is only preserved using cryo preparation methods. Therefore, a complete cryo transfer flange was designed and built to add cryogenic control of specimens to the configuration of the EMRAM instrument, a combined Raman spectrometer and XL-30 ESEM instrument. The Raman spectra of two model specimen, polystyrene beads and 2.3M sucrose were studied at ambient and cryogenic temperatures as well as during a heating ramp. Comparing the fingerprint regions of polystyrene and sucrose, both measured at ambient and at cryogenic conditions, only small spectral differences were observed for the main peaks of both molecules. A pronounced sharpening of the bands occurred in the 800–400 cm−1 region, a result of the reduction of intermolecular interactions. The enhanced visibility of the lower frequency modes may offer interesting potential for more detailed interpretation of Raman spectra.

Retention of basic components of a crude oil by clay-containing reservoir sandstone was studied by flowing crude oil through cores and monitoring the concentration of bases in the effluent. Cores that were H-saturated, H-saturated then aged, and Na-saturated retained 0·82, 0·82, 0·70, and 0·20 meq base/100 g, respectively. Barium exchange capacity values were 0·86, 0·71, and 0·83 meq/100 g. Subsequent floods with water, toluene, and chloroform-acetone removed oil that had increasing concentrations of base and N, indicating that the basic fraction of crude oil was the most difficult fraction to extract from clay mineral surfaces. Retained bases were nitrogenous and the most tenaciously held bases had base/N ratios approaching unity.

Chemical extraction of potassium from soils and micaceous minerals with solutions containing sodium tetraphenylboron : II. Biotite , Chemical extraction of potassium from soils and micaceous minerals with solutions containing sodium ... , مرکز فناوری اطلاعات و اطلاع رسانی کشاورزی