Search

The licuri nut shell is a potential source of biomass for energy production. The aim of this study was the physicochemical characterization of the licuri shell, focusing on the increase of its use as a fuel. The material was collected in Caldeirão Grande-BA and the characterization included a wide range of analyses such as: moisture content, bulk density, particle size distribution, ash content, volatile matter, fixed carbon, high heating value (HHV), hot water and cyclohexane/ethanol extractions, Klason lignin content, and thermogravimetric analysis (TGA). The obtained results were: moisture content (11,1%), HHV (4652 kcal.kg-1), Klason lignin content (36,86%), volatile content (74,91%), and fixed carbon (21,19%). The results showed that the material can be considered suitable for the purpose of generating energy when compared with other types of biomasses. The ash content (3,9%) and the extractives content (46,75%) are in accordance with the values observed for the babassu nut shell, Brazilian nut shell, and coconut. Finally, by the TGA analysis, it was observed that the degradation peak occurred at 272°C with a loss of 65% of weight. With these results, the licuri nut shell has shown to be potentially promising for the energy production.

Made available in DSpace on 2020-12-10T17:04:46Z (GMT). No. of bitstreams: 0 Previous issue date: 2019-01-01. Added 1 bitstream(s) on 2021-07-15T15:24:45Z : No. of bitstreams: 1 S2179-80872019005100109.pdf: 744762 bytes, checksum: 61e5dd29f8d298d260dcbbacc8009ad1 (MD5) Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) Nagoya University This work aims at the physicochemical characterization of four species: Eucalyptus sp, Pinus sp, Citrus sinensis and Hevea brasiliensis for use in ceramic furnace. Immediate analysis, chemical analyses were carried out (total extractives, Klason lignin, holocellulose and alpha-cellulose content). Results were applied to ANOVA and Tukey for statistics. The ash content of Pinus sp was 1.60%, for volatile material content Eucalyptus sp presented 83.61%, for fixed carbon values, Citrus sinensis presented 20.03%. Chemical analyses in the total extractive content, Citrus sinensis presented 21.76%, Klason lignin content, Pinus sp had 39.24%, Eucalyptus sp 60.29% had the highest holocellulose and alpha-cellulose, which was 42.72%. Pinus sp sample was the one with the highest heating value of 20.090 J/g. According to results obtained in the analyses, it is possible to conclude that all species have potential for applications in ceramic furnace. Univ Fed Sao Carlos UFSCar, Sorocaba, SP, Brazil Univ Estadual Paulista Julio de Mesquita Filho UN, Botucatu, SP, Brazil Inst Fed Educ Ciencia & Tecnol Sao Paulo IFSP, Itapetininga, SP, Brazil Nagoya Univ, Nagoya, Aichi, Japan Univ Estadual Paulista Julio de Mesquita Filho UN, Botucatu, SP, Brazil CAPES: PVE 117/2012 CAPES: 001

Reconstituted wood panels are widely used in various branches of the wood industry, such as in the furniture sectors and various segments of urban and rural construction. In Brazil, agricultural and forestry residues are abundantly generated, making feasible the study, development and application of alternative and sustainable materials, produced from the use of these wastes. The aim of this study was to produce high-density homogenous panels with wood residues of Pinus elliottii and oat hulls (Avena sativa), pressed with two types of adhesive, castor oil-based polyurethane and melamine formaldehyde, and to evaluate the physical performance of these panels. The physical performance of the panels was evaluated based on the ABNT NBR 14810: 2006, ANSI A208.1: 1999 and BS EN 312: 2003 standards. Analysis of variance (ANOVA) was performed to test the influence of the factors percentage of oat hull, percentage of adhesive and type of adhesive, and the interactions between these factors on the physical properties of the panels. The results indicated physical properties, in some treatments superior to the requirements stipulated by the consulted standards. It was concluded that the panels produced with the castor oil-based polyurethane adhesive showed better physical performance when compared with the panels produced with the melamine formaldehyde adhesive.