Search

Titanium surface characteristics, including microtopography, chemical composition, and wettability, are essential features to achieve osseointegration of dental implants, but the choice of a particular surface topography is still a debated topic among clinicians. An increased level of implant surface hydrophilicity has been demonstrated to ameliorate osseointegration and shorten healing times. The aim of this work is to develop and test a suitable thermal-based method to enhance titanium surface wettability without modifying other characteristics of the implant surface. For this function, titanium discs with different surface topography have been thermally treated by testing different temperatures and excluding those that led to evident chromatic and morphological modifications. The selected surface gain in wettability after the treatment was assessed through contact angle measurement, chemistry modifications through x-ray photoelectron spectroscopy (XPS) analysis, and microtopography through scanning electron microscopy (SEM). Results showed a great enhancement in hydrophilicity on the tested surfaces without any other modification in terms of surface chemical composition and topography. A possible limitation of this method could be the persistent, although relatively slow, biological aging of the surfaces after the treatment. The present findings indicate that the described treatment could be a safe and effective method to enhance dental titanium hydrophilicity and thus its biological performance.

Objectives The aim of the study was to investigate whether the osteoinductive properties of bone-conditioned medium (BCM) harvested from cortical bone chips within a clinically relevant short-term period can enhance the biologic characteristics of deproteinized bovine bone mineral (DBBM) in vitro. Materials and methods To assess the biofunctionalization of DBBM, the adhesive, proliferative, and differentiation properties of mesenchymal stromal ST2, pre-osteoblastic MC3T3-E1, and primary bone-derived cells grown on BCM-coated DBBM were examined by crystal violet staining of adherent cells, BrdU ELISA, and qRT-PCR, respectively. Results BCM extracted within 20 min or 24 h in either Ringer’s solution (BCM-RS) or RS mixed with autologous serum (BCM-RS + S) increased the adhesive properties of all three cell types seeded on DBBM. The 20-min BCM-RS preparation appeared more potent than the 24-h preparation. BCM-RS made within 20 min or 24 h had strong pro-proliferative effects on all cell types grown on DBBM. RS + S alone exhibited a considerable pro-proliferative effect, suggesting an impact of the serum on cellular growth. DBBM coated with BCM-RS or BCM-RS + S, made within 20 min or 24 h each, caused a significant induction of osteogenic differentiation marker expression with a higher potency of the BCM-RS + S. Finally, a strong additive effect of fresh bone chips combined with BCM-coated DBBM on the osteogenic differentiation of the three cell types was observed. Conclusions Altogether, the data strongly support the biofunctionalization of DBBM with BCM extracted within a clinically relevant time window of 20 min. Clinical relevance Pre-activation of non-osteoinductive biomaterials with BCM, prepared from autologous bone chips during a guided bone regeneration (GBR) procedure, bears the potential of an optimal treatment modality for bone defects in daily practice.

The use of alloplastic materials in periodontal regenerative therapies is limited by their incapacity to establish a dynamic dialog with the surrounding milieu. The aim of the present study was to control biomaterial surface bioactivity by introducing aptamers to induce the selective adsorption of fibronectin from blood, thus promoting platelets activation in vitro and bone regeneration in vivo. A hyaluronic acid/polyethyleneglycole-based hydrogel was enriched with aptamers selected for recognizing and binding fibronectin. In vitro, the capacity of constructs to support osteoblast adhesion, as well as platelets aggregation and activation was assessed by chemiluminescence within 24 h. Matrices were then evaluated in a rat periodontal defect to assess their regenerative potential by microcomputed tomography (µCT) and their osteogenic capacity by Luminex assay 5, 15 and 30 d postoperatively. Aptamers were found to confer matrices the capacity of sustaining firm cell adhesion (p = 0.0377) and to promote platelets activation (p = 0.0442). In vivo, aptamers promoted new bone formation 30 d post-operatively (p < 0.001) by enhancing osteoblastic lineage commitment maturation. Aptamers are a viable surface modification, which confers alloplastic materials the potential capacity to orchestrate blood clot formation, thus controlling bone healing.

Background Calcium ions levels in bone niches have been demonstrated to severely influence new bone formation. Osteoinductive scaffolds containing calcium have been largely studied to control the release of calcium in bone regeneration and tissue engineering purpose. The aim of the present study was, firstly, to synthesize two different resorbable calcium phosphate-based powders, thought to be reservoirs of calcium ions, and secondary, to investigate their effects on human osteoblasts, in order to develop a suitable titanium coating material. Methods Tetracalcium phosphate (A450) and biphasic tetracalcium phosphatae/tricalcium phosphate (A850) powders were prepared with an innovative method. The presence of calcium phosphate structures was chemically confirmed with XRD. Furthermore, powders macroscopic aspect was observed with a stereomicroscope. For in-vitro experiments, human osteoblastic cells were cultured in the presence of A450 and A850, and assayed for viability and metabolic activity through Crystal Violet and MTT, respectively. Results Our synthesis led to the formation of calcium phosphates in both samples, even though A850 presented a higher level of crystallinity and a more powdery aspects than A450. Both the samples enhanced the viability of cultured cells, inhibiting cell metabolic activity in the case of A850, which furthermore showed to be internalized by cells. Conclusions We developed two different kind of calcium phosphate-based powders and we tested their effect on human osteoblasts, underlying the possibility of use calcium phosphate-based coatings to enhance cell response on implantable materials.

In vitro studies have consistently shown that titanium surface wettability affects the response of osteoprogenitors, leading to important advances in the clinical osseointegration of dental implants. However, the underlying molecular mechanisms remain unknown. Since surface conditioning by blood components initiates within milliseconds after insertion, it is reasonable to hypothesize that the amount and the type of blood proteins adsorbed influences the interaction between the implant surface and osteoprogenitors. To test this hypothesis, titanium implant surfaces with different characteristics, in terms of topography and wettability, have been conditioned with selected plasma proteins. Pure fibronectin (HFN) and albumin (HSA) solutions, or their mixture at the relative plasma concentrations were allowed to adsorb on titanium surfaces for 60 min. Protein adsorption was monitored by Bradford assay, while the contribution of HSA and HFN in forming the microfilm layer at the interface was studied by Western Blot. Subsequently, the same protein-conditioned surfaces were used to culture C2C12 cells, thus studying their capacity to adhere and to spread after 3 h. Cell viability was evaluated up to 7 days, while the expression of osteogenic genes was assessed after 3 days. Under competitive adsorption conditions, hydrophilicity promotes the selectivity of titanium for HFN regardless of the surface microtopography. As a consequence of selective HFN adsorption, cells on hydrophilic surfaces displayed enhanced adhesion and spreading, as well as increased proliferation. On the other hand, selective HFN adsorption did not appreciably affect cell differentiation. These data suggest that implant surface hydrophilicity plays a key role in guiding the selective adsorption of specific proteins from blood plasma. Moreover, the selective adsorption of HFN, as a consequence of surface hydrophilicity, was found to account for early cell responses amelioration. Thus, titanium surface hydrophilicity contributes to the clinical success of dental implant by selectively controlling protein adsorption at the interface.

Objectives To investigate how a thermal treatment to increase titanium wettability influences proteins adsorption from blood serum and osteoblasts responses. Methods Titanium discs with machined or micro-rough profiles were thermally treated to obtain hydrophilic surfaces. The adsorption kinetics of two representative serum proteins were determined by Bradford assay, while the stable protein adsorption pattern from blood serum was investigated by SDS-PAGE and Western Blot analysis. Subsequently, MC3T3-E1 cells were cultured on titanium for 24h and assayed for adhesion and morphology. Results Thermally-induced hydrophilicity dramatically improved the capacity of titanium to selectively adsorb fibronectin and fibrinogen from blood serum, without evident influence on other representative serum proteins. The selective adsorption of fibronectin was linked to the improved capacity of MC3T3-E1 cells to adhere and spread on hydrophilic surfaces. Significance We identified a potential method to improve selective protein adsorption on titanium by enhancing implant surface wettability through a thermal treatment. Selective fibronectin adsorption was further indicated as the responsible for improved osteoblasts adhesion. Targeting specific cell response by selective protein adsorption appears to be crucial to conceive even more performant therapies.

Summary: The bioactivity of biomaterials is closely related to cell response in contact with them. However, shortly after their insertion, materials are soon covered with proteins that constitute the biological fluids, and which render the direct surface recognition by cells almost impossible. The control of protein adsorption at the interface is therefore desirable. Extracellular matrix proteins are of particular interest in this sense, due to their well-known ability to modulate cell behavior. Particularly, fibronectin plays a leading role, being present in both healthy and injured tissues undergoing healing and regeneration. The aim of the present work is to give an overview on fibronectin and on its involvement in the control of cell behavior providing evidence of its pivotal role in the control of cell adhesion, spreading, migration, proliferation and differentiation. A deep insight into methods to enrich biomaterials surface with fibronectin will be then discussed, as well as new cues on the possibility to design tailored platforms able to specifically retain fibronectin from the surrounding extracellular milieu.

Periodontitis is an inflammatory condition that can induce significant destruction of the periodontium, the set of specialized tissues that provide nourishment and support to the teeth. According to the guided tissue regeneration principles, the periodontium can be regenerated if the spatiotemporal control of wound healing is obtained, namely the tune control of cell response. After material implantation, protein adsorption at the interface is the first occurring biological event, which influences subsequent cell response. With the regard of this, we hypothesize that the control of selective adsorption of biological cues from the surrounding milieu may be a key-point to control selective cell colonization of scaffolds for periodontal tissue regeneration.

A decisive step in cell-biomaterial interaction is represented by the adsorption of proteins at the interface, whose fine control may be useful to trigger proper cell response. To this purpose, we can selectively control protein adsorption on biomaterials by means of aptamers. Aptamers selected to recognize fibronectin dramatically enhance chitosan ability to promote cell proliferation and adhesion, but the underlying biological mechanism remains unknown. We supposed that aptamers contributed to ameliorate the adsorption of fibronectin in an advantageous geometrical conformation for cells, thus regulating their morphology by the proper activation of the integrin-mediated pathway. We investigated this possibility by culturing epithelial cells on chitosan enriched with increasing doses of aptamers in the presence or in the absence of cytoskeleton pharmacological inhibitors. Our results showed that aptamers control cell morphology in a dose dependent manner (p &lt, 0.0001). Simultaneously, when the inhibition of actin polymerization was induced, the control of cell morphology was attenuated (p &lt, 0.0001), while no differences were detected when cells contractility was challenged (p &gt, 0.05). Altogether, our data provide evidence that aptamers contribute to control fibronectin adsorption on biomaterials by preserving its conformation and thus function. Furthermore, our work provides a new insight into a new way to accurately tailor material surface bioactivity.

The host-material interface is a crucial relationship dictating the possibility of successful osseointegration in implant dentistry. The aim of the present study was to characterize the effects of plasma proteins pre-adsorption on the adhesion capacity of osteoblasts, which occurs immediately after implant insertion in vivo. After having pre-adsorbed human plasma proteins on a machined and microrough titanium surface, MC3T3-E1 osteoblasts adhesion was evaluated through crystal violet cell adhesion assay, immunofluorescence staining for cytoskeleton, focal adhesions and cell nuclei, and scanning electron microscopy. The pre-adsorbed protein layer markedly affected the adhesion rate of cells, as well as their morphology and the expression of focal contacts. Moreover, protein adsorption to the underlying titanium surface was found to be correlated to surface pre-wetting. Thus, the early adsorption of serum proteins to the interface of dental implants impacts cell adhesion in terms of strength and of focal adhesions expression.

Nanomaterials play a pivotal role in modern regenerative medicine and tissue engineering, due to their peculiar physical, optical and biological properties once they are used in the nanometric size. Many evidences are showing the importance of biomaterial micro- and nano-topography on cellular adhesion, proliferation and differentiation, and hence, tissue regeneration. It is well known that nanowires (NWs) can mimic many different tissues as a result of their shape and their surface characteristics, and that surface hydrophilicity affects early protein adsorption and cellular adhesion. Therefore a material able to induce bone regeneration might be obtained by combining optimal surface topography and hydrophilicity. Based on these evidence, we designed silicon carbide (SiC) and core/shell silicon carbide/silicon dioxide (SiC/SiOx) nanowires with modified wettability in order to analyze cell behavior, using an in-vitro osteoblastic model. First, we synthetized SiC NWs and SiC/SiOx NWs through a chemical-vapour-deposition (CVD) process, and then we used hydrogen plasma to modify their hydrophilicity. Subsequently we evaluated the four types of NWs in terms of their morphology and contact angle, and we studied their behavior in the presence of MC3T3-E1 murine osteoblasts. Cell metabolic activity, viability, morphology and focal adhesions formation were considered. Morphological data showed different dimensions between SiC and SiC/SiOx NWs. SiC NWs before the hydrogen plasma treatment showed a very low contact angle, that was absent after the treatment. Osteoblastic cells appeared healthy on all of the samples. Interestingly, both hydrophilic SiC NWs and SiC/SiOx NWs generated a favorable distribution of focal adhesions around the cell body confirmed also by scanning electron microscopy images. Moreover, osteoblasts grown on hydrogen plasma treated SiC/SiOx NWs showed an increased metabolic activity testified by a significantly higher cell number. In conclusion, we are here demonstrating that hydrogen plasma treatment of SiC and SiC/SiOx NWs induce a better osteoblastic cellular adhesion by increasing NWs wettability. We are therefore suggesting that hydrogen plasma treatment of SiC/SiOx can offer a suitable method to develop scaffolds for bone tissue engineering applications.

The evidence that extracellular matrix (ECM) components could represent new targets for drugs designed to approach degenerative disease, requires their analysis. Before the analysis, proteins should be extracted from ECM and solubilized. Currently, few protocols for ECM proteins extraction and solubilization are available in literature, and most of them are based mainly on the use of proteolytic enzymes, such as trypsin, which often lead to proteins damage. Moreover, no methods have been so far proposed to solubilize Schwann Cell ECM, which may represent an important target for the therapy of neurodegenerative disorders. In our study, we propose to solubilize SC ECM through the use of surfactants and urea. We compared our method of solubilization, with one of that proposed in literature for a general ECM, mainly based on the use of enzymes. We want to highlight the benefit of solubilizing SC ECM, avoiding the use of proteolytic enzymes. To compare the amount of proteins extracted with both methods, MicroBCA assay was used, while the quality of the proteins extracted was observed through the SDS-PAGE. The results obtained confirm a better solubilization of SC ECM proteins with the proposed protocol, both quantitatively and qualitatively, showing a higher concentration of proteins extracted and a better enrichment of protein fractions, if compared to the enzyme-based protocol. Our results show that SC ECM could be efficiently solubilized through the use of surfactant and urea, avoiding the use of enzyme-base methods. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 3175-3180, 2016.

The aim of the study was to investigate cell adhesion to micro-structured titanium. Osteoblastic MC3T3 cells were cultured on smooth (P) or sand-blasted/acid-etched (SLA) titanium discs and were observed at scanning electron microscope/focused ion beam (SEM/FIB). Myosin II and actin microfilaments were labelled for epifluorescence microscopy. FIB revealed that cell adhesion initiated centrally and expanded to the cell periphery and that cells attached on the substrate by bridging over the titanium irregularities and adhering mostly on surface peaks. Gaps were visible between concave areas and cytoplasm and areas around ridges represented preferred attachment points for cells. A different myosin distribution was observed between samples and myosin inhibition affected cell responses. Taken together our data indicate that cells attach on micro-rough titanium by bridging over its irregularities. This is likely mediated by myosin II, whose distribution is altered in cells on SLA discs.

The aim of the present study was to investigate how the enrichment of chitosan films with anti-fibronectin aptamers could enhance scaffold colonization by osteoblasts, by improving their adhesion and accelerating their proliferation. Chitosan discs were enriched with excess of anti-fibronectin aptamer. Aptamer adsorption on chitosan was monitored by measuring aptamer concentration in the supernatant by spectrophotometry, as well as its release, while functionalization was confirmed by labelling aptamers with a DNA intercalating dye. Chitosan samples were then characterized morphologically with atomic force microscopy and physically with contact angle measurement. Chitosan enrichment with fibronectin was then investigated by immunofluorescence and Bradford assay. 2% chitosan discs were then enriched with increasing doses of aptamers and used as culture substrates for MC3T3-E1 cells. Cell growth was monitored by optical microscopy, while cell viability and metabolic activity were assessed by chemiluminescence and by Resazurin Sodium Salt assay. Cell morphology was investigated by cytofluorescence and by scanning electron microscopy. Chitosan films efficiently bound and retained aptamers. Aptamers did not affect the amount of adsorbed fibronectin, but affected osteoblasts behavior. Cell growth was proportional to the amount of aptamer used for the functionalization, as well as aptamers influenced cell morphology and their adhesion to the substrate. Our results demonstrate that the enrichment of chitosan films with aptamers could selectively improve osteoblasts behavior. Furthermore, our results support further investigation of this type of functionalization as a suitable modification to ameliorate the biocompatibility of biomaterial for hard tissue engineering applications. Graphical abstract: [InlineMediaObject not available: see fulltext.].

Surface topography is one of the main factors controlling cell responses on implanted devices and a proper definition of the characteristics that optimize cell behavior may be crucial to improve the clinical performances of these implants. Substrate geometry is known to affect cell shape, as cells try to optimize their adhesion by adapting to the irregularities beneath, and this in turn profoundly affects their activity. In the present study, we cultured murine calvaria MC3T3-E1 cells on surfaces with pillars arranged as hexagons with two different spacings and observed their morphology during adhesion and growth. Cells on these highly ordered substrates attached and proliferated effectively, showing a marked preference for minimizing the inter-pillar distance, by following specific pathways across adjacent pillars and displaying consistent morphological modules. Moreover, cell behavior appeared to follow tightly controlled patterns of extracellular protein secretion, which preceded and matched cells and, on a sub-cellular level, cytoplasmic orientation. Taken together, these results outline the close integration of surface features, extracellular proteins alignment and cell arrangement, and provide clues on how to control and direct cell spatial order and cell morphology by simply acting on inter-pillar spacing.

Protein adsorption on surfaces occurs shortly after scaffold insertion. This process is of pivotal importance to achieve therapeutic success in tissue engineering (TE), and favorable proteins should be adsorbed at the interface without unfolding to preserve their structure and function. Protein misfolding at the interface is a common phenom‐ enon, which can impair cell adhesion and scaffold colonization. Many efforts have been done to improve scaffold biocompatibility by ameliorating protein adsorption, but with poor results. In the present chapter, we propose the use of a novel class of molecules, aptamers, to improve scaffold biocompatibility. Aptamers are small, single stranded oligonucleotides, which specifically bind to a target molecule: they work as antibod‐ ies, but without many of the drawbacks associated to the use of antibodies. We propose to immobilize aptamers on scaffolds to retain specific proteins, acting as docking points to guide cell activity. In particular, we show the results obtained by enriching different polymeric scaffolds with aptamers against human fibronectin, a naturally abundant protein in tissues, which plays a pivotal role in cell adhesion. We demonstrate that scaffold enrichment with aptamers lead to a better colonization of the substrate from cells. The results we obtained pave the way to the possibility of further investigating the role of aptamers as useful molecules to improve scaffold biocompatibility in the contest of tissue engineering.

The aim of the present study was to investigate whether chitosan-based scaffolds modified with D-(+) raffinose and enriched with thiol-modified gelatin could selectively improve osteoblast adhesion and proliferation. 2, 3 and 4.5% chitosan films were prepared. Chitosan suitability for tissue engineering was confirmed by protein adsorption assay. Scaffolds were incubated with a 2.5 mg ml(-1) BSA solution and the decrease of protein content in the supernatants was measured by spectrophotometry. Chitosan films were then enriched with thiol-modified gelatin and their ability to bind BSA was also measured. Then, 2% chitosan discs with or without thiol-modified gelatin were used as culture substrates for MC3T3-E1 cells. After 72 h cells were stained with trypan blue or with calcein AM and propidium iodide for morphology, viability and proliferation assays. Moreover, cell viability was measured at 48, 72, 96 and 168 h to obtain a growth curve. Chitosan films efficiently bound and retained BSA proportionally to the concentration of chitosan discs. The amount of protein retained was higher on chitosan enriched with thiol-modified gelatin. Moreover, chitosan discs allowed the adhesion and the viability of cells, but inhibited their proliferation. The functionalization of chitosan with thiol-modified gelatin enhanced cell spreading and proliferation. Our data confirm that chitosan is a suitable material for tissue engineering. Moreover, our data show that the enrichment of chitosan with thiol-modified gelatin enhances its biological properties.