Search

Lignin is an aromatic-rich biomass polymer that is cheap, abundant, and sustainable. However, its application in the solid electrolyte field is rare due to challenges in well-defined polymer synthesis. Herein, the synthesis of lignin-graft-poly(ethylene glycol) (PEG) and its conductivity test for a solid electrolyte application are demonstrated. The main steps of synthesis include functionalization of natural lignin's hydroxyl to alkene, followed by graft-copolymerization of PEG thiol to the lignin via photoredox thiol-ene reaction. Two lignin-graft-PEGs are prepared having 22 wt% lignin (lignin-graft-PEG 550) and 34 wt% lignin (lignin-graft-PEG 2000). Then, new polymer electrolytes for conductivity tests are prepared via addition of lithium bis-trifluoromethanesulfonimide. The polymer graft electrolytes exhibit ionic conductivity up to 1.4 × 10-4 S cm-1 at 35 °C. The presence of lignin moderately impacts conductivity at elevated temperature compared to homopolymer PEG. Furthermore, the ionic conductivity of lignin-graft-PEG at ambient temperature is significantly higher than homopolymer PEG precedents.

Hydrolytic degradation of commercially available 3D printing filament, i.e. poly (lactic acid) with broad molecular weight distribution was induced by incubating 3D-printed parts in deionized water at 3 temperatures. Small changes in orthogonal dimensions occurred due to relaxation of printing stresses, but no mass or volume loss were detected over the time-frame of the experiments. Molecular weight decreased while polydispersity remained constant. The most sensitive measure of degradation was found to be nondestructive, small-amplitude oscillatory tensile measurements. A rapid decay of tensile storage modulus was found with an exponential decay time constant of about an hour. This work demonstrates that practical monitoring of commercially available PLA degradation can be achieve with linear viscoelastic measurements of modulus.