Search

Current trends in miniaturized diagnostics indicate an increasing demand for large quantities of mobile devices for health monitoring and point-of-care diagnostics. This comes along with a need for rapid but preferably also green microfabrication. Dry film photoresists (DFPs) promise low-cost and greener microfabrication and can partly or fully replace conventional silicon-technologies being associated with high-energy demands and the intense use of toxic and climate-active chemicals. Due to their mechanical stability and superior film thickness homogeneity, DFPs outperform conventional spin-on photoresists, such as SU-8, especially when three-dimensional architectures are required for micro-analytical devices (e.g. microfluidics). In this study, we utilize the commercial epoxy-based DFP ADEX to demonstrate various application scenarios ranging from the direct modification of microcantilever beams via the assembly of microfluidic channels to lamination-free patterning of DFPs, which employs the DFP directly as a substrate material. Finally, kinked, bottom-up grown silicon nanowires were integrated in this manner as prospective ion-sensitive field-effect transistors in a bio-probe architecture directly on ADEX substrates. Hence, we have developed the required set of microfabrication protocols for such an assembly comprising metal thin film deposition, direct burn-in of lithography alignment markers, and polymer patterning on top of the DFP., publishedVersion

The importance of the detection of As (III) heavy metal has been increased due to its toxicity in the environment, which is ultimately affecting all types of organisms depending upon the water which is the prime source of life. Application of the colorimetric probe applied to tissue samples because As (III) is the kind of heavy metal that can remain in the body for a prolonged time and can be retrieved even from the cadaver as it acts as a slow poison. Therefore, it is essential to detect its presence from a biological sample like viscera (i.e. tissues) in a user-friendly and cost-effective way without compromising the detection sensitivity and selectivity. Hence, in this work, we present a novel approach towards the detection of As (III) in tissue samples using an integrated hand-held device enabling high sensitivity, selectivity, and reproducibility of the detection. The present study, involved the preparation and characterization of polyethylene capped gold nanoparticles (PEG-AuNPs) nanocomposite using various characterization tools. An electrostatic interaction causes the aggregation of As (III) on binding with the nanocomposites, which can be detected colorimetrically. Further, the work involved the in-house fabrication of an integrated hand-held device for on-the-spot quantification of the As (III) ions complex in tissue samples with high selectivity and sensitivity. The results were compared and correlated with known standard methods. The PEG-AuNPs exhibit a specific colour change with respect to As (III) in both the platforms (water and tissue samples) after interacting with various concentrations of As (III) in solution. The sensing capability of our hand-held device using PEG-AuNPs showed a good correlation (r = 0.98) with known standard methods, i.e. UV–Vis spectroscopy and ICP–OES, under optimized conditions. PEG-AuNPs are highly sensitive and selective for As (III) even in the presence of various interfering agents and the detection limit of our device for tissue samples was found to be 2.9 ppm.

The kidney proximal tubule is the primary site for solute reabsorption, secretion and where kidney diseases can originate, including drug-induced toxicity. Two-dimensional cell culture systems of the human proximal tubule cells (hPTCs) are often used to study these processes. However, these systems fail to model the interplay between filtrate flow, fluid shear stress (FSS), and functionality essential for understanding renal diseases and drug toxicity. The impact of FSS exposure on gene expression and effects of FSS at differing rates on gene expression in hPTCs has not been thoroughly investigated. Here, we performed RNA-sequencing of human RPTEC/TERT1 cells in a microfluidic chip-based 3D model to determine transcriptomic changes. We measured transcriptional changes following treatment of cells in this device at three different fluidic shear stress. We observed that FSS changes the expression of PTC-specific genes and impacted genes previously associated with renal diseases in genome-wide association studies (GWAS). At a physiological FSS level, we observed cell morphology, enhanced polarization, presence of cilia, and transport functions using albumin reabsorption via endocytosis and efflux transport. Here, we present a dynamic view of hPTCs response to FSS with increasing fluidic shear stress conditions and provide insight into hPTCs cellular function under biologically relevant conditions.

Conventional neuronal network pattern formation techniques cannot control the arrangement of axons and dendrites because network structures must be fixed before neurite differentiation. To overcome this limitation, we developed a non-destructive stepwise microfabrication technique that can be used to alter microchannels within agarose to guide neurites during elongation. Micropatterns were formed in thin agarose layer coating of a cultivation dish using the tip of a 0.7 $$\upmu \mathrm{m}$$ μ m -diameter platinum-coated glass microneedle heated by a focused 1064-nm wavelength infrared laser, which has no absorbance of water. As the size of the heat source was 0.7 $$\upmu \mathrm{m}$$ μ m , which is smaller than the laser wavelength, the temperature fell to 45 $$^\circ \hbox {C}$$ ∘ C within a distance of 7.0 $$\upmu \mathrm{m}$$ μ m from the edge of the etched agarose microchannel. We exploited the fast temperature decay property to guide cell-to-cell connection during neuronal network cultivation. The first neurite of a hippocampal cell from a microchamber was guided to a microchannel leading to the target neuron with stepwise etching of the micrometer resolution microchannel in the agarose layer, and the elongated neurites were not damaged by the heat of etching. The results indicate the potential of this new technique for fully direction-controlled on-chip neuronal network studies.

Tissues are complex mixtures of different cell subtypes, and this diversity is increasingly characterized using high-throughput single cell analysis methods. However, these efforts are hindered, as tissues must first be dissociated into single cell suspensions using methods that are often inefficient, labor-intensive, highly variable, and potentially biased towards certain cell subtypes. Here, we present a microfluidic platform consisting of three tissue processing technologies that combine tissue digestion, disaggregation, and filtration. The platform is evaluated using a diverse array of tissues. For kidney and mammary tumor, microfluidic processing produces 2.5-fold more single cells. Single cell RNA sequencing further reveals that endothelial cells, fibroblasts, and basal epithelium are enriched without affecting stress response. For liver and heart, processing time is dramatically reduced. We also demonstrate that recovery of cells from the system at periodic intervals during processing increases hepatocyte and cardiomyocyte numbers, as well as increases reproducibility from batch-to-batch for all tissues., Existing methods for tissue dissociation are inefficient and lead to variable outcomes and biases. Here, the authors present a microfluidic platform that combines digestion, disaggregation and filtration of tissue to allow single cell analysis and RNA sequencing.

Albumin is widely used in pharmaceutical applications to alter the pharmacokinetic profile, improve efficacy, or decrease the toxicity of active compounds. Various drug delivery systems using albumin have been reported, including microparticles. Macroaggregated albumin (MAA) is one of the more common forms of albumin microparticles, which is predominately used for lung perfusion imaging when labeled with radionuclide technetium-99m (99mTc). These microparticles are formed by heat-denaturing albumin in a bulk solution, making it very challenging to control the size and dispersity of the preparations (coefficient of variation, CV, ∼50%). In this work, we developed an integrated microfluidics platform to create more tunable and precise MAA particles, the so-called microfluidic-MAA (M2A2). The microfluidic chips, prepared using off-stoichiometry thiol-ene chemistry, consist of a flow-focusing region followed by an extended and water-heated curing channel (85 °C). M2A2 particles with diameters between 70 and 300 μm with CVs between 10 and 20% were reliably prepared by adjusting the flow rates of the dispersed and continuous phases. To demonstrate the pharmaceutical utility of M2A2, particles were labeled with indium-111 (111In) and their distribution was assessed in healthy mice using nuclear imaging. 111In-M2A2 behaved similarly to 99mTc-MAA, with lung uptake predominately observed early on followed by clearance over time by the reticuloendothelial and renal systems. Our microfluidic chip represents an elegant and controllable method to prepare albumin microparticles for biomedical applications.

We present droplet manipulation using a digital microfluidic device comprising downward electrodes. Using this device, we demonstrated droplet transportation, programmable dispensing, and droplet c...

The COVID-19 global pandemic of 2019–2020 pointedly revealed the lack of diagnostic solutions that are able to keep pace with the rapid spread of the virus. Despite the promise of decades of lab-on-a-chip research, no commercial products were available to deliver rapid results or enable testing in the field at the onset of the pandemic. In this critical review, we assess the current state of progress on the development of point-of-care technologies for the diagnosis of viral diseases that cause pandemics. While many previous reviews have reported on progress in various lab-on-a-chip technologies, here we address the literature from the perspective of the testing needs of a rapidly expanding pandemic. First, we recommend a set of requirements to heed when designing point-of-care diagnostic technologies to address the testing needs of a pandemic. We then review the current state of assay technologies with a focus on isothermal amplification and lateral-flow immunoassays. Though there is much progress on assay development, we argue that the largest roadblock to deployment exists in sample preparation. We summarize current approaches to automate sample preparation and discuss both the progress and shortcomings of these developments. Finally, we provide our recommendations to the field of specific challenges to address in order to prepare for the next pandemic., Graphical abstract Image 1, Highlights • Despite decades of research, no products can to meet the testing needs of a pandemic. • We propose new guidelines for the design of point-of-care tests for pandemics. • We summarize the literature on point-of-care diagnostics for pandemics. • We find that sample preparation steps are the primary hindrance to deployment. • We provide a list of recommended research topics to prepare for future pandemics.

Detection, quantification and monitoring of virus – host cell interactions are of great importance when evaluating the safety of pharmaceutical products. With the wide usage of viral based vector systems in combination with mammalian cell lines for the production of biopharmaceuticals, the presence of replication competent viral particles needs to be avoided and potential hazards carefully assessed. Consequently, regulatory agencies recommend viral clearance studies using plaque assays or TCID50 assays to evaluate the efficiency of the production process in removing viruses. While plaque assays provide reliable information on the presence of viral contaminations, they are still tedious to perform and can take up to two weeks to finish. To overcome some of these limitations, we have automated, miniaturized and integrated the dual cell culture bioassay into a common lab-on-a-chip platform containing embedded electrical sensor arrays to enrich and detect infectious viruses. Results of our microfluidic single step assay show that a significant reduction in assay time down to 3 to 4 days can be achieved using simultaneous cell-based viral amplification, release and detection of cytopathic effects in a target cell line. We further demonstrate the enhancing effect of continuous fluid flow on infection of PG-4 reporter cells by newly formed and highly active virions by M. dunni cells, thus pointing to the importance of physical relevant viral–cell interactions.

We present a quantitative study of the metabolic activity of a single spheroid culture of human cancer cells. NMR (nuclear magnetic resonance) spectroscopy is an ideal tool for observation of live systems due to its non-invasive nature. However, limited sensitivity has so far hindered its application in microfluidic culture systems. We have used an optimised micro-NMR platform to observe metabolic changes from a single spheroid. NMR spectra were obtained by directly inserting microfluidic devices containing spheroids ranging from 150 $$\upmu$$ μ m to 300 $$\upmu$$ μ m in diameter in 2.5 $$\upmu$$ μ L of culture medium into a dedicated NMR probe. Metabolite concentrations were found to change linearly with time, with rates approximately proportional to the number of cells in the spheroid. The results demonstrate that quantitative monitoring of a single spheroid with $$\le$$ ≤ 2500 cells is possible. A change in spheroid size by 600 cells leads to a clearly detectable change in the l-Lactic acid production rate ($$p=3.5\times 10^{-3}$$ p = 3.5 × 10 - 3 ). The consumption of d-Glucose and production of l-Lactic acid were approximately 2.5 times slower in spheroids compared to monolayer culture of the same number of cells. Moreover, while cells in monolayer culture were found to produce l-Alanine and l-Glutamine, spheroids showed slight consumption in both cases.

Determining the nitrate levels is critical for water quality monitoring, and traditional methods are limited by high toxicity and low detection efficiency. Here, rapid nitrate determination was realized using a portable device based on innovative three-dimensional double microstructured assisted reactors (DMARs). On-chip nitrate reduction and chromogenic reaction were conducted in the DMARs, and the reaction products then flowed into a PMMA optical detection chip for absorbance measurement. A significant enhancement of reaction rate and efficiency was observed in the DMARs due to their sizeable surface-area-to-volume ratios and hydrodynamics in the microchannels. The highest reduction ratio of 94.8% was realized by optimizing experimental parameters, which is greatly improved compared to conventional zinc-cadmium based approaches. Besides, modular optical detection improves the reliability of the portable device, and a smartphone was used to achieve a portable and convenient nitrate analysis. Different water samples were successfully analysed using the portable device based on DMARs. The results demonstrated that the device features fast detection (115 s per sample), low reagent consumptions (26.8 μL per sample), particularly low consumptions of toxic reagents (0.38 μL per sample), good reproducibility and low relative standard deviations (RSDs, 0.5-1.38%). Predictably, the portable lab-on-chip device based on microstructured assisted reactors will find more applications in the field of water quality monitoring in the near future.

We present a photocurable, biocompatible, and flexible silicone-hydrogel hybrid material for stereolithographic (SLA) printing of biomedical devices. The silicone-hydrogel polymer is similar to mix...

Single-molecule fluorescence detection offers powerful ways to study biomolecules and their complex interactions. Here, nanofluidic devices and camera-based, single-molecule Förster resonance energy transfer (smFRET) detection are combined to study the interactions between plant transcription factors of the auxin response factor (ARF) family and DNA oligonucleotides that contain target DNA response elements. In particular, it is shown that the binding of the unlabeled ARF DNA binding domain (ARF-DBD) to donor and acceptor labeled DNA oligonucleotides can be detected by changes in the FRET efficiency and changes in the diffusion coefficient of the DNA. In addition, this data on fluorescently labeled ARF-DBDs suggest that, at nanomolar concentrations, ARF-DBDs are exclusively present as monomers. In general, the fluidic framework of freely diffusing molecules minimizes potential surface-induced artifacts, enables high-throughput measurements, and proved to be instrumental in shedding more light on the interactions between ARF-DBDs monomers and between ARF-DBDs and their DNA response element.

Cell development and behavior are driven by internal genetic programming, but the external microenvironment is increasingly recognized as a significant factor in cell differentiation, migration, and in the case of cancer, metastatic progression. Yet it remains unclear how the microenvironment influences cell processes, especially when examining cell motility. One factor that affects cell motility is cell mechanics, which is known to be related to substrate stiffness. Examining how cells interact with each other in response to mechanically differential substrates would allow an increased understanding of their coordinated cell motility. In order to probe the effect of substrate stiffness on tumor related cells in greater detail, we created hard–soft–hard (HSH) polydimethylsiloxane (PDMS) substrates with alternating regions of different stiffness (200 and 800 kPa). We then cultured WI-38 fibroblasts and A549 epithelial cells to probe their motile response to the substrates. We found that when the 2 cell types were exposed simultaneously to the same substrate, fibroblasts moved at an increased speed over epithelial cells. Furthermore, the HSH substrate allowed us to physically guide and separate the different cell types based on their relative motile speed. We believe that this method and results will be important in a diversity of areas including mechanical microenvironment, cell motility, and cancer biology.

Lab-on-Chip technology comprises one of the most promising technologiesenabling the widespread adoption of Point-of-Care testing in routine clinicalpractice. However, until now advances in Lab-on-Chip have not been translatedto the anticipated degree to commercialized tools, with integrated device massmanufacturing cost still not at a competitive level for several key clinicalapplications. Lab-on-PCB is currently considered as a candidate technologyaddressing this issue, owing to its intuitive compatibility with electronics,seamless integration of electrochemical biosensors and the extensive experienceregarding industrial manufacturing processes. Inkjet-printing in particular is acompatible fabrication method, widening the range of electronic materialsavailable and thus enabling seamlessly integrated ultrasensitive electronicdetection. To this end, in this work stable pseudo-reference electrodes are fabricated for the first time by means of commercial inkjet-printing on a PCB integrated electrochemical biosensing platform. SEM and XPS analysis areemployed to characterize the electrodes’ structure and composition and identifyany special characteristics, compared to published work on alternative substrates.Additionally, this paper analyzes integrated reference electrodes from a newperspective, focusing mainly on their characteristics in real-life operation:chemical sintering as opposed to high budget thermal one, stability undercontinuous flow, pH dependency and bias stress effects on electrode instability, aparameter often overlooked in electrochemical biosensors.

The paper presents a newly designed microfluidic system that allows simulation of myocardial hypoxia by biochemical method. The geometry of the microsystem was designed in such a way, that quantitative fluorescent measurements using a spectrofluorometric plate reader was possible. Biochemical simulation of hypoxia was carried out using potent mitochondrial oxidative phosphorylation uncoupler—Carbonyl cyanide-4-(trifluoromethoxy)phenylhydrazone (FCCP). Two cardiac cell lines were used in the study—rat cardiomyoblasts (H9C2) and human cardiomyocytes. The effectiveness of biochemical simulation of hypoxia was studied using two fluorescent dyes: carbocyanine iodide (JC-1) and Fluo-4. Changes in the mitochondrial membrane potential and concentration of intracellular calcium ions were tested. The major novelty of this research was the applying the microfluidic system to create hypoxia conditions for cardiac cells using the biochemical approach. In further studies, the presented hypoxia model could be used to develop new methods of treatment of ischemic heart disease for example in cell therapy based on stem cells.

The patterning of polydimethylsiloxane (PDMS) into complex two-dimensional (2D) or 3D shapes is a crucial step for diverse applications based on soft lithography. Nevertheless, mould replication that incorporates time-consuming and costly photolithography processes still remains the dominant technology in the field. Here we developed monolithic quasi-3D digital patterning of PDMS using laser pyrolysis. In contrast with conventional burning or laser ablation of transparent PDMS, which yields poor surface properties, our successive laser pyrolysis technique converts PDMS into easily removable silicon carbide via consecutive photothermal pyrolysis guided by a continuous-wave laser. We obtained high-quality 2D or 3D PDMS structures with complex patterning starting from a PDMS monolith in a remarkably low prototyping time (less than one hour). Moreover, we developed distinct microfluidic devices with elaborated channel architectures and a customizable organ-on-a-chip device using this approach, which showcases the potential of the successive laser pyrolysis technique for the fabrication of devices for several technological applications. A laser-based patterning method enables the fast fabrication of high-quality two- and three-dimensional features in polydimethylsiloxane for microfluidics and biomedical applications.

In the present study, we introduce a new approach for rapid bonding of poly(methyl methacrylate) (PMMA)-based microdevices using an acetic acid solvent with the assistance of UV irradiation. For the anticipated mechanism, acetic acid and UV irradiation induced free radicals on the PMMA surfaces, and acrylate monomers subsequently formed cross-links to create a permanent bonding between the PMMA substrates. PMMA devices effectively bonded within 30 s at a low pressure using clamps, and a clogging-free microchannel was achieved with the optimized 50% acetic acid. For surface characterizations, contact angle measurements and bonding performance analyses were conducted using predetermined acetic acid concentrations to optimize bonding conditions. In addition, the highest bond strength of bonded PMMA was approximately 11.75 MPa, which has not been reported before in the bonding of PMMA. A leak test was performed over 180 h to assess the robustness of the proposed method. Moreover, to promote the applicability of this bonding method, we tested two kinds of microfluidic device applications, including a cell culture-based device and a metal microelectrode-integrated device. The results showed that the cell culture-based application was highly biocompatible with the PMMA microdevices fabricated using an acetic acid solvent. Moreover, the low pressure required during the bonding process supported the integration of metal microelectrodes with the PMMA microdevice without any damage to the metal films. This novel bonding method holds great potential in the ecofriendly and rapid fabrication of microfluidic devices using PMMA.

Both clenbuterol (CLB) and ractopamine (RAC) are β-adrenergic agonists. After long-term excessive intake, there will be adverse reactions such as headache, chest tightness, limb numbness, and serious life-threatening. Simultaneous detection of CLB and RAC in related samples is of great importance for human health. In this work, we outline a microfluidics-based indirect competitive immunoassay (MICI) system that can sensitively detect residual CLB and RAC in pork, swine blood and swine urine. The rapid detection of multiple samples can be achieved in one chip, which greatly improves the detection efficiency. This method has good stability and reproducibility and the microfluidic chips are easy to manufacture. The linear ranges for CLB and RAC detection by MICI are 0.1–2.5 ng/mL and 0.1–5 ng/mL, and the limits of detection (LODs) are 0.094 ng/mL and 0.091 ng/mL, respectively. This straightforward and portable immunoassay system provides a good platform for rapid detection of harmful substances in food samples.

Tumor invasion within the interstitial space is critically regulated by the force balance between cell-extracellular matrix (ECM) and cell-cell interactions. Interstitial flows (IFs) are present in both healthy and diseased tissues. However, the roles of IFs in modulating cell force balance and subsequently tumor invasion are understudied. In this article, we develop a microfluidic model in which tumor spheroids are embedded within 3D collagen matrices with well-defined IFs. Using co-cultured tumor spheroids (1:1 mixture of metastatic and non-tumorigenic epithelial cells), we show that IFs downregulate the cell-cell adhesion molecule E-cadherin on non-tumorigenic cells and promote tumor invasion. Our microfluidic model advances current tumor invasion assays towards a more physiologically realistic model using tumor spheroids instead of single cells under perfusion. We identify a novel mechanism by which IFs can promote tumor invasion through an influence on cell-cell adhesion within the tumor and highlight the importance of biophysical parameters in regulating tumor invasion.

The function and susceptibility of various drugs are tested with renal proximal tubular epithelial cells; yet, replicating the morphology and kidneys function using the currently available in vitro models remains difficult. To overcome this difficulty, in the study presented in this paper, a device and a three-layer microfluidic chip were developed, which provides a simulated environment for kidney organs. This device includes two parts: (1) microfluidic drug concentration gradient generator and (2) a flow-temperature controlled platform for culturing of kidney cells. In chip study, renal proximal tubular epithelial cells (RPTECs) and peritubular capillary endothelial cells (PCECs) were screened with the drugs to assess the drug-induced nephrotoxicity. Unlike cells cultured in petri dishes, cells cultured in the microfluidic device exhibited higher performance in terms of both cell growth and drug nephrotoxicity evaluation. It is worth mentioning that a significant decrease in cisplatin-induced nephrotoxicity was found because of the intervention of cimetidine in the microfluidic device. In conclusion, the different in the cell performance between the microfluidic device and the petri dishes demonstrates the physiological relevance of the nephrotoxicity screening technology along with the microfluidic device developed in this study. Furthermore, this technology can also facilitate the development of reliable kidney drugs and serve as a useful and efficient test-bed for further investigation of the drug nephrotoxicity evaluation.

Microfluidic devices are constructed from polydimethylsiloxane (PDMS) due to their biocompatibility, fabrication ease, well-established protocols, and simplicity. PDMS-based microfluidic devices are constructed by (i) applying liquid PDMS to a negative mold (usually a silicon or 3D-printed mold) and (ii) curing the PDMS with heat exposure over a set time period. Unreacted resin monomers in 3D-printed molds prevent PDMS from fully curing, resulting in improper channel formation in PDMS and reducing the PDMS device’s efficacy. An in-house protocol that uses SU-8 as a “non-stick” coating on 3D-printed molds facilitates the successful casting of PDMS. Contact angle, surface profile, optical profile, and force testing prove that PDMS cast from SU-8-treated molds resembles pristine PDMS, unlike PDMS cast from untreated molds. Further, this method is generalized to commercial 3D prints using different 3D printing resins. To demonstrate this technique’s viability in microfluidic devices, a microfluidic tree using PDMS from treated 3D prints shows vibrant colors and clear lines. This is absent from an untreated PDMS.

Astronauts face serious health threats during spaceflight. The two major factors that may lead to an astronauts' physiological dysfunction are space radiation and microgravity. Heavy ion radiation, one of the important components of charged particles in orbit, can cause deoxyribonucleic acid (DNA) damage and gene mutations. Microgravity can also affect a series of cell physiology functions, including cytoskeleton remodeling, DNA modification, interactions between molecules, etc. Several ionizing radiation experiments performed in our previous study suggested the variation in the mutation across different selected immune genes. Here, we performed a further experiment (IGM-BIT-1) on board the International Space Station (ISS) to explore the molecule evolution rules of the selected DNA. To conduct the on-orbit amplification of the DNA fragments from the antibody encoding genes in the ISS, a self-developed portable and programmable PCR device was designed and produced. We developed a novel PCR chip that consists of a multi-channel optical adhesive reaction chamber and a miniature thermal cycler. The reaction chamber was cost effective and disposable. The thermal cycler was used to achieve both rapid heating and cooling. As the DNA amplification yield of IGM-BIT-1 PCR device was much similar or even higher than the commercial devices, the IGM-BIT-1 payload has been proven to be suitable for space life science research.

Recently, Nanotechnology has made easier utilizing plant pathogens as a potential nanomaterial in biomedical applications. In this research work, we have exploited a devastating plant pathogenic virus of Squash leaf curl China virus (SLCCNV), as a nano-bio template (32 nm) to fabricate the gold and silver nanomaterials. This is achieved through the direct exposure of SLCCNV to gold chloride (HAuCl4) and silver nitrate (AgNO3) precursors at sunlight, resulted into SLCCNV-metallic-hybrid nanomaterials which are synthesized quick (∼5 min) and eco-friendly. However, virus hybrid nanomaterials are fabricated through the nucleation and growth of metal precursors over the pH-activated capsid of SLCCNV. Under the controlled fabrication process, it produced a highly arrayed virus-metallic-hybrid nanomaterial at nanoscale size limit. Its properties are thoroughly studied through spectroscopic techniques (UV–Vis, DLS, Raman) and electron microscopy (HRTEM & FESEM). In a follow-up study of cytotoxicity assay, the virus and its fabricated nanomaterials show better biocompatibility features even at high concentrations. Finally, the electrical conductivities of virus-metallic-hybrid nanomaterials (Au & Ag) are determined by simple “lab on a chip” system and Keithley's pico-ammeter. The result of electrical conductivity measurement revealed that hybrid nanomaterials have greater electrical conductive properties within the band-gap of semi-conductive materials. It is truly remarkable that a plant virus associated metal nanomaterials can be efficiently used as bio-semi-conductors which are the ideal one for biomedical applications. Keywords: Virus nanotechnology, Virus template, Surface biomineralization, Virus hybrid nanomaterials, Electrical conductivity, Biocompatibility

Challenges in drug development of neurological diseases remain mainly ascribed to the blood–brain barrier (BBB). Despite the valuable contribution of animal models to drug discovery, it remains difficult to conduct mechanistic studies on the barrier function and interactions with drugs at molecular and cellular levels. Here we present a microphysiological platform that recapitulates the key structure and function of the human BBB and enables 3D mapping of nanoparticle distributions in the vascular and perivascular regions. We demonstrate on-chip mimicry of the BBB structure and function by cellular interactions, key gene expressions, low permeability, and 3D astrocytic network with reduced reactive gliosis and polarized aquaporin-4 (AQP4) distribution. Moreover, our model precisely captures 3D nanoparticle distributions at cellular levels and demonstrates the distinct cellular uptakes and BBB penetrations through receptor-mediated transcytosis. Our BBB platform may present a complementary in vitro model to animal models for prescreening drug candidates for the treatment of neurological diseases., Developing an in vitro blood-brain-barrier (BBB) model that reproduces the organ’s complex structure and function is an open challenge. Here the authors present a BBB-on-a-chip that includes endothelial cells, pericytes and a 3D astrocytic network which resembles the morphology and function of astrocytes in the BBB in vivo.

Nucleic acid amplification techniques such as real-time PCR are essential instruments for the identification and quantification of viruses. They are fast, very sensitive and highly specific, but often require elaborate and labor intensive sample preparation to achieve successful amplification of the target sequence. In this work we demonstrate the complete microfluidic preparation of amplifiable virus DNA from dilute specimens. Our approach combines free-flow electrophoretic preconcentration of viral particles with thermal lysis and gel-electrophoretic nucleic acid extraction on a single device. The on-chip preconcentration achieves a capture efficiency of >99% for dilute suspensions of bacteriophage PhiX174. Following preconcentration, phages are thermally lysed and released DNA is recovered after 40 s of on-chip gel-electrophoresis with a recovery rate of ∼73%. Furthermore we demonstrate a detection limit of ∼1 PFU ml-1 (∼0.02 DNA copies per μl) for the detection of bacteriophage PhiX174 by PCR. To simplify operation of the device, we describe the development of a custom-made chip holder as well as a compact peristaltic pump and power supply, which enable user-friendly operation with low risk of cross-contamination and high potential for automation in the field of point-of-care diagnostics.

Rapid screening of foodborne pathogens is key to prevent food poisoning. In this study, a lab-on-chip device was developed for rapid, automatic and sensitive detection of viable Salmonella typhimurium using loop-mediated isothermal amplification (LAMP) and smartphone real-time turbidity monitoring. First, magnetic nanoparticles (MNPs) coated with anti-Salmonella capture antibodies in propidium monoazide (PMA) were fully mixed with bacterial samples using two active magnetic stirring mixers at reverse rotating directions, and incubated in the serpentine channel with 470 nm blue light exposure, allowing specific formation of magnetic bacteria and sufficient PMA pretreatment of the DNA of dead bacteria. Then, the PMA-treated magnetic bacteria were separated in the separation chamber using the magnetic field and their genomic DNA templates were extracted using lysis buffer at 70 °C. Finally, the viable bacteria's DNA was amplified using LAMP in the detection chamber preloaded with the lyophilized LAMP reagents at 67.5 °C after blocking with paraffin oil to avoid aerosol cross contamination. Finally, the turbidity of the LAMP reaction system was monitored in a real-time manner for the quantitative detection of viable bacteria. The experimental results demonstrated that this device was able to automatically detect viable Salmonella as low as 14 CFU mL-1 in spiked chicken meat supernatants within 1.5 h. This device is very promising to provide a sample-in-result-out solution for the in-field detection of Salmonella and could be easily extended for other foodborne pathogens.

This paper reports on the development of a fluorescent label-free aptamer assay integrated in a lab-on-chip (LoC) system for the detection of Ochratoxin A (OTA). The detection system relies on the integration, on a single glass substrate, of an array of amorphous silicon photosensors and a long pass interferential filter. The aptamer assay, integrated into the microfluidic network, is an aptasensor having affinity versus OTA, selected as a case study. The fluorescent molecule is a "light switch" complex [Ru(phen)

Forensic Short Tandem Repeat (STR) genotyping is almost exclusively performed by capillary electrophoresis (CE) in specialized laboratories. As an alternative to CE, and to enable miniaturized lab-on-a-chip STR profiling, we developed the QueSTR probes, a hybridization-based genotyping assay that relies on the recognition and cleavage of an RNA:DNA duplex by the RNase H2 enzyme. For each STR allele to be genotyped, a matching DNA probe containing one RNA moiety is designed. After performing asymmetric STR PCR, a hybridization curve analysis indicates the matching probe(s), and thus indicates the allele(s) present in the sample. Accurate genotyping of 13 samples was obtained using the QueSTR probes for three CODIS core loci (D165539, D75820, and TH01). A probe corresponding to the TH01 9.3 allele was included to demonstrate accurate genotyping, even in the presence of a partial repeat. The QueSTR probes are a valuable option to miniaturize STR genotyping in lab-on-a-chip devices that cannot harbor a CE analysis.

Compared with traditional monolayer cell culture, the three-dimensional tumor spheroid has emerged as an essential in vitro model for cancer research due to the recapitulation of the architecture and physiology of solid human tumors. Herein, by implementing the rapid prototyping of a benchtop 3D printer, we developed a new strategy to generate and analyze tumor spheroids on a commonly used multi-well plate. In this method, the printed artifact can be directly mounted on a 96/384-well plate, enables hanging drop-based spheroid formation, avoiding the tedious fabrication process from micromechanical systems. Besides long-term spheroid culture (20 days), this method supports subsequent analysis of tumor spheroid by seamlessly dripping from the printed array, thereby eliminating the need for spheroids retrieval for downstream characterization. We demonstrated several tumor spheroid-based assays, including tumoroid drug testing, metastasis on or inside extracellular matrix gel, and tumor transendothelial (TEM) assay. Based on quantitative phenotypical and molecular analysis without any precarious retrieval and transfer, we found that the malignant breast cancer (MDA-MB-231) cell aggregate presents a more metastatic morphological phenotype than the non-malignant breast cancer (MCF-7) and colonial cancer (HCT-116) cell spheroid, and shows an up-regulation of epithelial-mesenchymal transition (EMT) relevant genes (fold change > 2). Finally, we validated this tumor malignancy by the TEM assay, which could be easily performed using our approach. This methodology could provide a useful workflow for expediting tumoroid modeled in vitro assay, allowing the “Lab-on-a-Cloud” scenario for routine study.

Microfluidic-based tumor models that mimic tumor culture environment have been developed to understand the cancer metastasis mechanism and discover effective antimetastatic drugs. These models successfully recapitulated key steps of metastatic cascades, yet still limited to few metastatic steps, operation difficulty, and small molecule absorption. In this study, we developed a metastasis system made of biocompatible and drug resistance plastics to recapitulate each metastasis stage in three-dimensional (3D) mono- and co-cultures formats, enabling the investigation of the metastatic responses of cancer cells (A549-GFP). The plug-and-play feature enhances the efficiency of the experimental setup and avoids initial culture failures. The results demonstrate that cancer cells tended to proliferate and migrate with circulating flow and intravasated across the porous membrane after a period of 3 d when they were treated with transforming growth factor-beta 1 (TGF-β1) or co-cultured with human pulmonary microvascular endothelial cells (HPMECs). The cells were also observed to detach and migrate into the circulating flow after a period of 20 d, indicating that they transformed into circulating tumor cells for the next metastasis stage. We envision this metastasis system can provide novel insights that would aid in fully understanding the entire mechanism of tumor invasion.

Microelectrode arrays (MEAs) are widely used to study the behavior of cells noninvasively and in real time. While the design of MEAs focuses mainly on the electrode material or its application-dependent modification, the passivation layer, which is crucial to define the electrode area and to insulate the conducting paths, remains largely unnoticed. Because often most cells are in direct contact with the passivation layer rather than the electrode material, biocompatible photoresists such as SU-8 are almost exclusively used. However, SU-8 is not without limitations in terms of optical transmission, optimal cell support, or compatibility within polymer-based microfluidic lab on chip systems. Here, we established a silicon nitride (SiN) passivation by physical vapor deposition (PVD), which was optimized and evaluated for impedance spectroscopy-based monitoring of cells. Surface characteristics, biocompatibility, and electrical insulation capability were investigated and compared to SU8 in detail. To investigate the influence of the SiN passivation on the impedimetric analysis of cells, HEK-293 A and MCF-7 were chosen as adherent cell models and measured on microelectrodes of 50-200 μm in diameter. The results clearly revealed an overall suitability of SiN as alternative passivation. While for the smallest electrode size a cell line dependent comparable or slightly decreased cell signal could be observed in comparison with SU-8, a significant higher cell signal was observed for microelectrodes larger than 50 μm in diameter. Furthermore, a high suitability for the bonding of PEGDA and PDMS microfluidic structures on the SiN passivation layer without any leakage could be demonstrated.