Search

We describe a polymer-templated protein nanoball (PTPNB) system as an in-situ platform for the preparation of polymer-protein core-shell capsules containing hydrophobic cargos. These structures boast high protein activity through soft immobilization and maintain a consistent protein orientation through a specific interaction between the protein and polymer. We demonstrate the potential of this PTPNB system through bio-conjugation, encapsulation, and size-control of nanoballs in a one-pot process, and furthermore characterize the effects of nanoball size on endocytosis.

Background Viral infections often pose tremendous public health concerns as well as economic burdens. Despite the availability of vaccines or antiviral drugs, personal hygiene is considered as effective means as the first-hand measure against viral infections. The green tea catechins, in particular, epigallocatechin-3-gallate (EGCG), are known to exert potent antiviral activity. In this study, we evaluated the green tea extract as a safe personal hygiene against viral infections. Results Using the influenza virus A/Puerto Rico/8/34 (H1N1) as a model, we examined the duration of the viral inactivating activity of green tea extract (GTE) under prolonged storage at various temperature conditions. Even after the storage for 56 days at different temperatures, 0.1% GTE completely inactivated 106 PFU of the virus (6 log10 reduction), and 0.01% and 0.05% GTE resulted in 2 log10 reduction of the viral titers. When supplemented with 2% citric acid, 0.1% sodium benzoate, and 0.2% ascorbic acid as anti-oxidant, the inactivating activity of GTE was temporarily compromised during earlier times of storage. However, the antiviral activity of the GTE was steadily recovered up to similar levels with those of the same concentrations of GTE without the supplements, effectively prolonging the duration of the virucidal function over extended period. Cryo-EM and DLS analyses showed a slight increase in the overall size of virus particles by GTE treatment. The results suggest that the virucidal activity of GTE is mediated by oxidative crosslinking of catechins to the viral proteins and the change of physical properties of viral membranes. Conclusions The durability of antiviral effects of GTE was examined as solution type and powder types over extended periods at various temperature conditions using human influenza A/H1N1 virus. GTE with supplements demonstrated potent viral inactivating activity, resulting in greater than 4 log10 reduction of viral titers even after storage for up to two months at a wide range of temperatures. These data suggest that GTE-based antiviral agents could be formulated as a safe and environmentally friendly personal hygiene against viral infections.

Protein adsorption on biomaterial surfaces has been investigated in the development of protein-repellent implantable devices. While the study of the adsorption of a single protein have produced valuable insights of the role of specific proteins in the biological responses to biomaterials, a systematic high throughput screening method is needed to gain more comprehensive understanding of such a complex process, mainly because biomaterials are exposed to protein mixtures when implanted in the human body. To further advance our knowledge of the dynamics of protein adsorption/desorption at interfaces between proteins and solid surfaces, proteomic technologies have been explored to determine relationships between adsorbed proteins on the surfaces and subsequent biological responses. In this review, we will briefly describe the protein adsorption process and proteomics technologies and focus on subsequent biological responses to biomaterials such as blood/biomaterial interactions, biocompatibility, and cell behavior, to obtain more comprehensive understanding of the process for the development of improved biomaterials. We also highlight a number of challenges of contemporary proteomics technologies and future perspectives to advance our knowledge of protein adsorption/desorption dynamics on the surfaces of biomaterials.

Next-generation synthetic bone graft therapies will most likely be composed of resorbable polymers in combination with bioactive components. In this article, we continue our exploration of E1001(1k), a tyrosine-derived polycarbonate, as an orthopedic implant material. Specifically, we use E1001(1k), which is degradable, nontoxic, and osteoconductive, to fabricate porous bone regeneration scaffolds that were enhanced by two different types of calcium phosphate (CP) coatings: in one case, pure dicalcium phosphate dihydrate was precipitated on the scaffold surface and throughout its porous structure (E1001(1k) + CP). In the other case, bone matrix minerals (BMM) such as zinc, manganese and fluoride were co-precipitated within the dicalcium phosphate dihydrate coating (E1001(1k) + BMM). These scaffold compositions were compared against each other and against ChronOS (Synthes USA, West Chester, PA, USA), a clinically used bone graft substitute (BGS), which served as the positive control in our experimental design. This BGS is composed of poly(lactide co-ε-caprolactone) and beta-tricalcium phosphate. We used the established rabbit calvaria critical-sized defect model to determine bone regeneration within the defect for each of the three scaffold compositions. New bone formation was determined after 2, 4, 6, 8 and 12 weeks by micro-computerized tomography (μCT) and histology. The experimental tyrosine-derived polycarbonate, enhanced with dicalcium phosphate dihydrate, E1001(1k) + CP, supported significant bone formation within the defects and was superior to the same scaffold containing a mix of BMM, E1001(1k) + BMM. The comparison with the commercially available BGS was complicated by the large variability in bone formation observed for the laboratory preparations of E1001(1k) scaffolds. At all time points, there was a trend for E1001(1k) + CP to be superior to the commercial BGS. However, only at the 6-week time point did this trend reach statistical significance. Detailed analysis of the μCT data suggested an increase in bone formation from 2 through 12 weeks in implant sites treated with E1001(1k) + CP. At 2 and 4 weeks post-implantation, bone formation occurred at the interface where the E1001(1k) + CP scaffold was in contact with the bone borders of the implant site. Thereafter, during weeks 6, 8 and 12 bone formation progressed throughout the E1001(1k) + CP test implants. This trend was not observed with E1001(1k) + BMM scaffolds or the clinically used BGS. Our results suggest that E1001(1k) + CP should be tested further for osteoregenerative applications.

Hydrogels have a unique opportunity to regenerate damaged cartilage tissues by introducing mesenchymal stem cells (MSCs) in a highly swollen environment similar to articular cartilage. During cartilage development, collagen–cell interactions play an important role in mediating early mesenchymal condensation and chondrogenesis with transforming growth factor-β1 (TGF-β1) stimulation. Here, a hydrogel environment that can enhance cell–matrix interactions and chondrogenesis by stabilizing type-II collagen (Col II) and TGF-β1 into photopolymerizable (methacrylated) chitosan (MeGC) with simple entrapment and affinity binding is demonstrated. The MeGC hydrogel was designed to gel upon initiation by exposure to visible blue light in the presence of riboflavin, an aqueous initiator from natural vitamin. The incorporation of Col II into MeGC hydrogels increased cellular condensation and deposition of cartilaginous extracellular matrix by encapsulated chondrocytes. MeGC hydrogels containing Col II supported the release of TGF-β1 in a controlled manner over time in chondrogenic medium and the incorporated TGF-β1 further enhanced chondrogenesis of encapsulated chondrocytes and MSCs, especially synovial MSCs. Subcutaneous implantation of hydrogel cultures showed greatly improved neocartilage formation in constructs loaded with TGF-β1 compared with controls. These findings suggest that cartilage mimetic hydrogels have a high potential for cartilage repair.

We have investigated the reduction of silver ions in a gold nanoparticle suspension by dihydroxybenzene isomers: hydroquinone (1,4-dihydroxybenzene), catechol (1,2-dihydroxybenzene), and resorcinol (1,3-dihydroxybenzene). We found that using these isomers as reducing agents resulted in distinctive color changes of suspensions. When hydroquinone was added to suspensions containing cysteamine-modified gold nanoparticles and silver nitrate, the suspension changed from red to yellow because a silver shell formed on the gold nanoparticles. With catechol, the suspension initially turned yellow from formation of core–shell nanoparticles, and then it became black following the polymerization of catechol on the nanoparticle surfaces. This caused charge reversal followed by aggregation of core–shell nanoparticles. The addition of resorcinol, however, did not produce core–shell nanoparticles because its high oxidation peak potential prevented the reduction of silver ions, keeping the suspension color unchanged. Based on the color changes, we could detect the concentration of hydroquinone and catechol with high sensitivity. Moreover, the addition of Fe(III) ions enabled selective detection of hydroquinone in a mixture of dihydroxybenzene isomers by forming a chelate complex with catechol.

Reconstructing segmental mandiblular defects remains a challenge in the clinic. Tissue engineering strategies provide an alternative option to resolve this problem. The objective of the present study was to determine the effects of adipose-derived stem cells (ASCs) and bone morphogenetic proteins-2 (BMP-2) in three-dimensional (3D) scaffolds on mandibular repair in a small animal model. Noggin expression levels in ASCs were downregulated by a lentiviral short hairpin RNA strategy to enhance ASC osteogenesis (ASCs(Nog-)). Chitosan (CH) and chondroitin sulfate (CS), natural polysaccharides, were fabricated into 3D porous scaffolds, which were further modified with apatite coatings for enhanced cellular responses and efficient delivery of BMP-2. The efficacy of 3D apatite-coated CH/CS scaffolds supplemented with ASCs(Nog-) and BMP-2 were evaluated in a rat critical-sized mandibular defect model. After 8 weeks postimplantation, the scaffolds treated with ASCs(Nog-) and BMP-2 significantly promoted rat mandibular regeneration as demonstrated by micro-computerized tomography, histology, and immunohistochemistry, compared with the groups treated with ASCs(Nog-) or BMP-2 alone. These results suggest that our combinatorial strategy of ASCs(Nog-)+BMP-2 in 3D apatite microenvironments can significantly promote mandibular regeneration, and these may provide a potential tissue engineering approach to repair large bony defects.

Recently, the peptide(or protein)-polymer hybrid materials (PPs) were sought in many research areas as potential building blocks for assembling nanostructures in selective solvents. In PPs, the facile routes of preparing well-defined peptide-polymer bio-conjugates and their specific activities in various applications are important issues. Our strategy to prepare the peptide-polymer hybrid materials was to combine atom transfer radical polymerization (ATRP) method with solid phase peptide synthesis. The standard solid phase peptide synthesis method was employed to prepare the PYGK (proline-tyrosine-glycine-lysine) peptide. PYGK is an analogue peptide, PFGK (proline-phenylalanine-glycine-lysine), which interacted with plasminogen in fibrinolysis. The peptide and the peptide-initiator were characterized with MALDITOF mass spectrometry and H NMR spectrometer. The peptide-polymer, pSt-PYGK was characterized by GPC, IR, H NMR spectrometer and TLC. Spherical micellar aggregates were determined by TEM and SEM. Current synthesis methodology suggested opportunities to create the well-defined peptide-polymer hybrid materials with specific binding activity.

The purpose of the study was to determine the effects of dual administration of recombinant human platelet derived growth factor-BB (rhPDGF-BB) and recombinant human bone morphogenetic protein-2 (rhBMP-2) on proliferation and osteogenic differentiation of human mesenchymal stem cells (hMSCs). Either rhPDGF-BB or rhBMP-2 or a combination of the two factors was administered into hMSCs. Proliferation and osteogenic differentiation were determined by measuring DNA concentration, alkaline phosphatase (ALP) activity and mineralization (von Kossa staining) at days 7, 14 and 21. The data revealed that the administration of rhPDGF-BB (days 1-7) followed by rhBMP-2 (days 7-21) resulted in a significant increase of ALP activity and extracellular mineral deposition of hMSCs as compared to that of either factor alone or concurrent administration of the two factors. In addition, rhPDGF-BB treatment at days 1-7 significantly increased proliferation of hMSCs without decreasing osteogenic differentiation. The results underscored the importance of a coordinated, temporal sequence of rhPDGF-BB and rhBMP-2 administration to modulate hMSC osteogenic differentiation. The study was a compelling advancement towards producing a therapy exploiting temporal, dual administration of physiological doses of rhPDGF-BB and rhBMP-2.

Magnetite, Fe3O4, is a promising anode material for lithium ion batteries due to its high theoretical capacity (924 mA h g−1), high density, low cost and low toxicity. However, its application as high capacity anodes is still hampered by poor cycling performance. To stabilize the cycling performance of Fe3O4 nanoparticles, composites comprising Fe3O4 nanoparticles and graphene sheets (GS) were fabricated. The Fe3O4/GS composite disks of mm dimensions were prepared by electrostatic self-assembly between negatively charged graphene oxide (GO) sheets and positively charged Fe3O4-APTMS [Fe3O4 grafted with (3-aminopropyl)trimethoxysilane (APTMS)] in an acidic solution (pH = 2) followed by in situ chemical reduction. Thus prepared Fe3O4/GS composite showed an excellent rate capability as well as much enhanced cycling stability compared with Fe3O4 electrode. The superior electrochemical responses of Fe3O4/GS composite disks assure the advantages of: (1) electrostatic self-assembly between high storage-capacity materials with GO; and (2) incorporation of GS in the Fe3O4/GS composite for high capacity lithium-ion battery application.

Porous three-dimensional tyrosine-derived polycarbonate (TyrPC) scaffolds with a bimodal pore distribution were fabricated to mimic bone architecture using a combination of salt-leaching and phase separation techniques. TyrPC scaffolds degraded in register with bone regeneration during the 6-week study period and compressive moduli of the scaffolds were maintained >0.5 MPa at 6 weeks of incubation in PBS at 37 °C. The TyrPC scaffolds either unsupplemented or supplemented with recombinant human bone morphogenetic protein-2 (rhBMP-2) were implanted in a rabbit calvarial critical-sized defect (CSD) model and the TyrPC scaffolds treated with rhBMP-2 or TyrPC coated with calcium phosphate scaffold alone promoted bone regeneration in a rabbit calvarial CSD at 6 weeks postimplantation. A synthetic TyrPC polymeric scaffold either without a biological supplement or with a minimal dose of rhBMP-2 induced bone regeneration comparable to a commercially available bone graft substitute in a nonrodent CSD animal model.

Comprehensive in vivo biodegradability and biocompatibility of unmodified and Arg-Gly-Asp (RGD) peptide-modified PEG/Sebacic acid based hydrogels were evaluated and compared to the control material poly(lactide-co-glycolide) (PLGA) using a cage implantation system, as well as direct subcutaneous implantation for up to 12 weeks. The total weight loss after 12 weeks of implantation for unmodified PEGSDA and RGD-modified PEGSDA in the cage was approximately 42% and 52%, respectively, with no statistical difference (p> 0.05). The exudate analysis showed that PEGSDA hydrogels induced minimal inflammatory response up to 21 days following implantation, similar to the controls (empty cage and the cage containing PLGA discs). Histology analysis from direct subcutaneous implantation of the hydrogels and PLGA scaffold showed statistically similar resolution of the acute and chronic inflammatory responses with development of the fibrous capsule between the PEGSDA hydrogels and the control (PLGA). The cage system, as well as the histology analysis, demonstrated that the degradation products of both hydrogels, with or without RGD peptide modification, are biocompatible without statistically significant differences in the inflammatory responses, as compared to PLGA.

We have developed a new fabrication technique to create three-dimensional (3D) porous poly(epsilon-caprolactone fumarate) (PCLF) scaffolds using hydrogel microparticle porogens, as an alternative to overcome certain limitations of traditional scaffold fabrication techniques such as a salt leaching method. Both natural hydrogel, gelatin, and synthetic hydrogel, poly(ethylene glycol) sebacic acid diacrylate, were used as porogens to fabricate 3D porous PCLF scaffolds. Hydrogel microparticles were prepared by a single emulsion technique with the particle size in the range of 100-500 microm after equilibrium in water. The pore size distribution, porosity, pore interconnectivity, and spatial pore heterogeneity of the 3D PCLF scaffolds were assessed using micro-computed tomography and imaging analysis. Scaffolds fabricated with the hydrogel porogens had higher porosity and pore interconnectivity as well as more homogeneous spatial pore distribution, compared to the scaffolds made from the salt leaching process. Compressive moduli of the scaffolds were also measured and showed that lower porosity yielded greater modulus of the scaffolds. Overall, the new fabrication technology using hydrogel porogens may be beneficial for certain tissue engineering applications.

Novel biodegradable injectable poly(ethylene glycol)-(PEG) based macromers were synthesized by reacting low-molecular weight PEG (MW: 200) and dicarboxylic acids such as sebacic acid or terephthalic acid. Chemical structures of the resulting polymers were confirmed by Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) spectroscopy characterizations. Differential scanning calorimetry (DSC) showed that these polymers were completely amorphous above room temperature. After photopolymerization, dynamic elastic shear modulus of the crosslinked polymers was up to 1.5 MPa and compressive modulus was up to 2.2 MPa depending on the polymer composition. The in vitro degradation study showed that mass losses of these polymers were gradually decreased over 23 weeks of period in simulated body fluid. By incorporating up to 30 wt % of 2-hydroxyethyl methylmethacrylate (HEMA) into the crosslinking network, the dynamic elastic modulus and compressive modulus was significantly increased up to 7.2 and 3.2 MPa, respectively. HEMA incorporation also accelerated the degradation as indicated by substantially higher mass loss of up to 27% after 20 weeks of incubation. Cytocompatability studies using osteoblasts and neural cells revealed that cell metabolic activity on these polymers with or without HEMA was close to the control tissue culture polystyrene. The PEG-based macromers developed in this study may be useful as scaffolds or cell carriers for tissue engineering applications.

There is no doubt that protein adsorption plays a crucial role in determining biocompatibility of biomaterials. Despite the information of the identity and composition of blood plasma/serum proteins adsorbed on surfaces of biomaterials to understand which proteins are involved in blood/biomaterial interactions, it still does not provide information about the conformations and orientations of adsorbed protein, which are very important in determining biological responses to biomaterials. Therefore, our laboratory has developed an experimental technology to probe protein conformations on materials that is applicable to mixtures of proteins. Herein, the new application of hydrogen/deuterium (H/D) exchange combined with mass spectrometry was applied to determine conformational changes of adsorbed proteins at biomaterial surfaces. The results suggest that there may be a significant conformational change in adsorbed proteins at 'low' bulk concentrations that leads to a large change in the kinetics of H/D exchange as compared to 'high' bulk concentrations. This technique may eventually be useful for the study of the kinetics of protein conformational changes.

Background Unlike bone tissue, articular cartilage regeneration has not been very successful and has many challenges ahead. We have previously developed injectable hydrogels using photopolymerizable chitosan (MeGC) that supported growth of chondrocytes. In this study, we demonstrate a biofunctional hydrogel for specific use in cartilage regeneration by conjugating transforming growth factor-β1 (TGF-β1), a well-documented chondrogenic factor, to MeGC hydrogels impregnating type II collagen (Col II), one of the major cartilaginous extracellular matrix (ECM) components. Results TGF-β1 was delivered from MeGC hydrogels in a controlled manner with reduced burst release by chemically conjugating the protein to MeGC. The hydrogel system did not compromise viability of encapsulated human synovium-derived mesenchymal stem cells (hSMSCs). Col II impregnation and TGF-β1 delivery significantly enhanced cellular aggregation and deposition of cartilaginous ECM by the encapsulated cells, compared with pure MeGC hydrogels. Conclusions This study demonstrates successful engineering of a biofunctional hydrogel with a specific microenvironment tailored to promote chondrogenesis. This hydrogel system can provide promising efficacious therapeutics in the treatment of cartilage defects. Electronic supplementary material The online version of this article (doi:10.1186/1754-1611-9-1) contains supplementary material, which is available to authorized users.

ZSM-5 type zeolites were synthesized by the hydrothermal treatment of the reaction mixture of silica sol, aluminum nitrate, sodium hydroxide, and TPABr at the temperature range of 150–180 °C in the autoclave. The shape of the ZSM-5 zeolite calcined at 450 °C was spherical or polyhedral and its crystalline size was 0.5–3 μm. The synthetic ZSM-5 was found to be highly hydrophobic and active for CO2 adsorption. ZSM-5 zeolite composite membranes supported with porous α-alumina tubes have been synthesized by dip coating or pressurized coating of the reaction sol-mixture followed by hydrothermal treatment. The permeation mechanism of CO2 through ZSM-5 membranes was a surface diffusion and the membranes prepared by the pressurized-coating hydrothermal treatment showed a fairly high CO2/N2 separation factor of 9.0 and a permeability of 10−8–10−7 mol/m2 ·s·Pa at room temperature.

Cationic nanogels with site-selected functionality were designed for the delivery of nucleic acid payloads targeting numerous therapeutic applications. Functional cationic nanogels containing quaternized 2-(dimethylamino)ethyl methacrylate and a cross-linker with reducible disulfide moieties (qNG) were prepared by activators generated by electron transfer (AGET) atom transfer radical polymerization (ATRP) in an inverse miniemulsion. Polyplex formation between the qNG and nucleic acid exemplified by plasmid DNA (pDNA) and short interfering RNA (siRNA duplexes) were evaluated. The delivery of polyplexes was optimized for the delivery of pDNA and siRNA to the Drosophila Schneider 2 (S2) cell-line. The qNG/nucleic acid (i.e., siRNA and pDNA) polyplexes were found to be highly effective in their capabilities to deliver their respective payloads.

The osteogenic potential of biomimetic tyrosine-derived polycarbonate (TyrPC) scaffolds containing either an ethyl ester or a methyl ester group combined with recombinant human bone morphogenetic protein-2 (rhBMP-2) was assessed using the preosteoblast cell line MC3T3-E1. Each composition of TyrPC was fabricated into 3D porous scaffolds with a bimodal pore distribution of micropores

Poly(e-caprolactone fumarate) (PCLF) scaffold formulations were assessed as a delivery system for recombinant human bone morphogenetic protein (rhBMP-2) for bone tissue engineering. The formulations included PCLF with combinations of poly(vinyl alcohol) (PVA) and hydroxyapatite (HA). The assessments included in vitro and in vivo assays. In vitro assays validated cell attachment using a pre-osteoblast cell line (MC3T3-E1). Additionally, in vitro release profiles of rhBMP-2 from PCLF scaffolds were determined up to 21 days. The data suggested that PCLF incorporated with PVA and HA accelerated rhBMP-2 release and that the released protein was bioactive. For the in vivo study, a critical-sized defect (CSD) model in rabbit calvaria was used to test PCLF scaffolds. At 6 weeks post-implantation, significantly more bone formation was measured in PCLF scaffolds containing rhBMP-2 than in scaffolds without rhBMP-2. In conclusion, we demonstrated that PCLF delivered biologically active rhBMP-2, promoted bone healing in a CSD and has potential as a bone tissue engineering scaffold.

In this study, the bioactive effects of poly(ethylene glycol) (PEG) sebacic acid diacrylate (PEGSDA) hydrogels with or without RGD peptide modification on osteogenic differentiation and mineralization of marrow stromal cells (MSCs) were examined. In a separate experiment, the ability of PEGSDA hydrogel to serve as a delivery vehicle for bone morphogenetic protein 2 (BMP-2) was also investigated. As a scaffold, the attachment and proliferation of MSCs on PEGSDA hydrogel scaffolds with and without RGD peptide modification was similar to the control, tissue culture polystyrene. In contrast, cells were barely seen on unmodified PEG diacrylate (PEGDA) hydrogel throughout the culture period for up to 21 days. Osteogenic phenotypic expression such as alkaline phosphatase (ALP) of MSCs as well as mineralized calcium content were significantly higher on PEGSDA-based hydrogels than those on the control or PEGDA hydrogels. Potential use of PEGSDA scaffold as a delivery vehicle of osteogenic molecules such as BMP-2 was also evaluated. Initial burst release of BMP-2 from PEGSDA hydrogel scaffold (14.7%) was significantly reduced compared to PEGDA hydrogel scaffold (84.2%) during the first 3 days of a 21-day release period. ALP activity of an osteoblast was significantly higher in the presence of BMP-2 released from PEGSDA hydrogel scaffolds compared to that in the presence of BMP-2 released from PEGDA scaffolds, especially after 6 days of release. Overall, PEGSDA hydrogel scaffolds without further modification may be useful as orthopedic tissue engineering scaffolds as well as local drug carriers for prolonged sustained release of osteoinductive molecules.

Novel biodegradable poly(ethylene glycol) (PEG) based hydrogels, namely, PEG sebacate diacrylate (PEGSDA) were synthesized, and their properties were evaluated. Chemical structures of these polymers were confirmed by Fourier transform infrared and proton nuclear magnetic resonance (1H NMR) spectroscopy. After photopolymerization, the dynamic shear modulus of the hydrogels was up to 0.2 MPa for 50% PEGSDA hydrogel, significantly higher than conventional hydrogels such as PEG diacrylate (PEGDA). The swelling ratios of these macromers were significantly lower than PEGDA. The in vitro degradation study demonstrated that these hydrogels were biodegradable with weight losses about 66% and 32% for 25% and 50% PEGSDA after 8 weeks of incubation in phosphate-buffered saline at 37 degrees C. In vitro biocompatibility was assessed using cultured rat bone marrow stromal cells (MSCs) in the presence of unreacted monomers or degradation products. Unlike conventional PEGDA hydrogels, PEGSDA hydrogel without RGD peptide modification induced MSC cell adhesion similar to tissue culture polystyrene. Finally, complex three-dimensional structures of PEGSDA hydrogels using solid free form technique were fabricated and their structure integrity was better maintained than PEGDA hydrogels. These hydrogels may find use as scaffolds for tissue engineering applications.

The aim of the study was to determine bone regeneration in a rabbit radius critical-size defect (CSD) model using a specific polymer composition (E1001(1k)) from a library of tyrosine-derived polycarbonate scaffolds coated with a calcium phosphate (CP) formulation (E1001(1k) + CP) supplemented with recombinant human bone morphogenetic protein-2 (rhBMP-2). Specific doses of rhBMP-2 (0, 17, and 35 μg/scaffold) were used. E1001(1k) + CP scaffolds were implanted in unilateral segmental defects (15 mm length) in the radial diaphyses of New Zealand White rabbits. At 4 and 8 weeks post-implantation, bone regeneration was determined using micro-computed tomography (µCT), histology, and histomorphometry. The quantitative outcome data suggest that E1001(1k) + CP scaffolds with rhBMP-2 were biocompatible and promoted bone regeneration in segmental bone defects. Histological examination of the implant sites showed that scaffolds made of E1001(1k) + CP did not elicit adverse cellular or tissue responses throughout test periods up to 8 weeks. Noteworthy is that the incorporation of a very small amount of rhBMP-2 into the scaffolds (as low as 17 μg/defect site) promoted significant bone regeneration compared to scaffolds consisting of E1001(1k) + CP alone. This finding indicates that E1001(1k) + CP may be an effective platform for bone regeneration in a critical size rabbit radius segmental defect model, requiring only a minimal dose of rhBMP-2.

The purposes of this study were to determine the pharmacokinetics of recombinant human bone morphogenetic protein-2 (rhBMP-2) from a polyurethane (PUR)-based porous scaffold and to determine the biological responses of human mesenchymal stem cells (hMSCs) to the rhBMP-2 released from those scaffolds. The rhBMP-2 was incorporated into the PUR three-dimensional (3D) porous scaffolds and release profiles were determined using enzyme-linked immunosorbent assay. The bioactivity of the rhBMP-2 containing releasates was determined using hMSCs and compared with exogenous rhBMP-2. Release of rhBMP-2 from PUR-based systems was bi-phasic and characterized by an initial burst followed by a sustained release for up to 21 days. Expression of alkaline phosphatase activity by hMSCs treated with the rhBMP-2 releasates was significantly greater than the cells alone (control) throughout the time periods. Furthermore, after 14 days of culture, the hMSCs cultured with rhBMP-2 releasate had a greater amount of mineralization compared to exogenous rhBMP-2. Overall, the rhBMP-2 release from the PUR-based scaffolds was sustained for 21 days and the releasates appeared to be bioactive and promoted earlier osteogenic differentiation and mineralization of hMSCs than the exogenous rhBMP-2.

Bone tissue engineering scaffolds composed of poly(d,l-lactide:glycolide) (DL-PLGA) and β-tricalcium phosphate (β-TCP) nanocomposites were prepared and characterized. Scaffolds with two specific architectures were produced via fused deposition modeling (FDM), a type of extrusion freeform fabrication. Microfilaments deposited at angles of 0° and 90° were designated as the 'simple' scaffold architecture, while those deposited at angles alternating between 0°, 90°, 45° and -45° were designated as the 'complex' scaffold architecture. In addition, the simple and complex scaffolds were coated with hydroxyapatite (HA). The surface morphology of the scaffolds was assessed before and after HA coating and uniform distribution of HA coating on the surface was observed by scanning electron microscopy. The scaffolds were implanted into rabbit femoral unicortical bone defects according to four treatment groups based on pore structure and HA coating. After 6 and 12 weeks, scaffolds and host bone were recovered and processed for histology. Data suggest that all configurations of the scaffolds integrated with the host bone and were biocompatible and thus may offer an exciting new scaffold platform for delivery of biologicals for bone regeneration.

Polycarbonate terpolymers consisting of desaminotyrosyl-tyrosine alkyl esters (DTR), desaminotyrosyl-tyrosine (DT), and low molecular weight blocks of poly(ethylene glycol) (PEG) are a new class of polymers that have good engineering properties while also being resorbable in vivo. This study is the first evaluation of their (i) degradation behavior, (ii) in vitro cytotoxicity, and (iii) in vivo biocompatibility. Porous, tissue engineering scaffolds were prepared by a combination of solvent casting, porogen leaching and phase separation techniques. The scaffolds (>90% porosity) displayed (i) a bimodal pore distribution with micropores of less than 20 µm and macropores between 200 and 400 µm, (ii) a highly interconnected and open pore architecture, and (iii) a highly organized microstructure where the micropores are oriented and aligned along the walls of the macropores. Molecular weight (number average, Mn) and mass loss were determined in vitro (PBS at 37 °C) for up to 28 days. All three terpolymer compositions were fast degrading and retained only 10% of their initial molecular weight after 21 days, while mass loss during the 28 days was polymer composition-dependent. In vitro biocompatibility of the polymer scaffolds was determined up to 14 days by measuring metabolic activity of MC3T3.E1 (subclone 4) pre-osteoblasts. The outcome showed no statistical difference between cells cultured in monolayer and all tested polymer scaffolds. Robust cell attachment throughout the scaffold volume was observed by confocal microscopy and SEM. The biocompatibility of resorbing scaffolds was evaluated at 12 week in a critical sized defect (CSD) rabbit calvaria model and showed only a minimal inflammatory response. Overall, the results reported here illustrate the potential utility of tyrosine-derived polycarbonate terpolymers in the design of tissue engineering scaffolds.