Search

Biting midges (Culicoides spp.) are vectors of bluetongue and Schmallenberg viruses. Treatment of mesh barriers is a common method for preventing insect-vectored diseases and has been proposed as a means of limiting Culicoides ingression into buildings or livestock transporters. Assessments using animals are costly, logistically difficult and subject to ethical approval. Therefore, initial screening of test repellents/insecticides was made by applying treatments to mesh (2 mm) cages surrounding Onderstepoort light traps. Five commercial treatments were applied to cages as per manufacturers' application rates: control (water), bendiocarb, DEET/p-menthane-3,8-diol (PMD) repellent, Flygo (a terpenoid based repellent) and lambda-cyhalothrin. The experimental design was a 5 × 5 Latin square, replicated in time and repeated twice. Incongruously, the traps surrounded by DEET/PMD repellent-treated mesh caught three to four times more Obsoletus group Culicoides (the commonest midge group) than the other treatments. A proposed hypothesis is that Obsoletus group Culicoides are showing a dose response to DEET/PMD, being attracted at low concentrations and repelled at higher concentrations but that the strong light attraction from the Onderstepoort trap was sufficient to overcome close-range repellence. This study does not imply that DEET/PMD is an ineffective repellent for Culicoides midges in the presence of an animal but rather that caution should be applied to the interpretation of light trap bioassays.

The leaf oil of Heteropyxis dehniae Suess. (Heteropyxidaceae) was obtained by hydrodistillation and analyzed by GC/MS. The most abundant essential oil components are linalool (58.3%), 4-terpineol (9.8%), α-terpineol (3.6%), and caryophyllene oxide (3.1%). The antimicrobial activity against Bacillus cereus, Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, Candida albicans, and Aspergillus niger, and the in vitro cytotoxicity of the oil on PC-3, MDA-MB-231, Hs 578T, MCF7, SK-MEL-28, and 5637 human tumor cells were also examined. Caryophyllene oxide shows notable cytotoxic activity with LC50 values of 147–351 μM.

We have investigated the laser induced ablation–oxidation process on porous silicon layers having different porosities and thicknesses by non-destructive optical techniques. In particular, the interaction between a low power blue light laser and the porous silicon surfaces has been characterized by variable angle spectroscopic ellipsometry and Fourier transform infrared spectroscopy. The oxidation profiles etched on the porous samples can be tuned as functions of the layer porosity and laser fluence. Oxide stripes of width less than 2 µm and with thicknesses between 100 nm and 5 µm have been produced, depending on the porosity of the porous silicon, by using a 40 × focusing objective.

Nanostructured materials, due to their peculiar physical and chemical properties, constitute the new class of functional supports for specific innovative applications. There is a strong competition between synthetic, man-made nanostructured materials and those coming directly from nature: the first ones can be precisely tailored by properly design and fabrication; the second ones are directly available without any cost of production. In this paper, we report our latest achievements on different materials, porous silicon, zinc oxide nanowires and diatomite powders, which belong to these categories.

Interfaces play a key role in optical biosensor fabrication: biological molecules need to be integrated with inorganic transducers, both electrical and optical, preserving their functions and specificity. Single DNA stands, proteins, enzymes, and antibodies must be blocked on surface by absorption or covalently, depending on different chemistry used. In case of proteins and antibodies, also orientation of biological molecules is very important. In this work, we present our results on a biological passivation procedure that employs hydophobins, small amphiphilic proteins. Since these proteins complex with sugars in nature, we also suggest their utilization as functional layer in optical biosensor for glucose.

One of the most important goals in the fields of biology and medicine is the possibility to dispose of efficient tools for the characterization of the extraordinary complexity of ligand-receptor interactions. To approach this theme, we explored the use of crystalline silicon (cSi) technology for the realization of a biotechnological device in which the ligand-receptor interactions are revealed by means of optical measurements. Here, we describe a chemical procedure for the functionalization of microwell etched on silicon wafers, and the subsequent anchoring of biological molecules like an antibody anti-A20 murine lymphoma cell line. The optical analysis of the interaction on the biochips between the bound biomolecule and their corresponding ligand indicated that the functionalized cSi is suitable for this application.

In this work, we have fabricated a porous silicon (PSi) Bragg reflectors microarray using a proper technological process based on photolithography and electrochemical anodization of silicon. Each element of the array is characterized by a diameter of 200 μm. The PSi structures have been used as platform to immobilize label-free DNA probe and a simple optical method has been employed to investigate the interaction between probe-DNA and its complementary target. In order to confirm the specificity of the DNA hybridization, we have also verified that the reaction of probe-DNA with non-complementary DNA did not occur.

In this work, we report on the fabrication of an hybrid material based on a porous silicon (PSi) layer infiltrated by an amino functionalized poly(e-caprolattone) (PCL-NH2). The organic–inorganic structure has been characterized by variable angle spectroscopic ellipsometry, optical reflectometry and water contact angle measurements. A polymer coated PSi layer, 3 μm thick, shows improved wettability and chemical stability against long lasting, up to 18 min, exposure to an alkaline environment. Even after basic treatment, the structure still retains a very good quality optical response, so that it may be proposed as a high performance platform for biochemical sensing applications.

Diatoms are monocellular micro-algae provided with external valves, the frustules, made of amorphous hydrated silica. Frustules present patterns of regular arrays of holes, the areolae, characterized by sub-micrometric dimensions. Frustules from centric diatoms are characterized by a radial disposition of areolae and exhibit several optical properties, such as photoluminescence, lens-like behavior and, in general, photonic-crystal-like behavior as long as confinement of electromagnetic field is concerned. In particular, intrinsic photoluminescence from frustules is strongly influenced by the surrounding atmosphere: on exposure to gases, the induced luminescence changes both in the optical intensity and peaks positions. To give specificity against a target analyte, a key feature for an optical sensor, a biomolecular probe, which naturally recognizes its ligand, can be covalently linked to the diatom surface. We explored the photoluminescence emission properties of frustules of Coscinodiscus wailesii centric species, characterized by a diameter of about 100-200 μm, on exposure to different vapours and in presence of specific bioprobes interacting with target analytes. Very high sensitivities have been observed due to the characteristic morphology of diatoms shells. Particular attention has been devoted to the emission properties of single frustules. Diatoms are monocellular micro-algae provided with external valves, the frustules, made of amorphous hydrated silica. Frustules present patterns of regular arrays of holes, the areolae, characterized by sub-micrometric dimensions. Frustules from centric diatoms are characterized by a radial disposition of areolae and exhibit several optical properties, such as photoluminescence, lens-like behavior and, in general, photonic-crystal-like behavior as long as confinement of electromagnetic field is concerned. In particular, intrinsic photoluminescence from frustules is strongly influenced by the surrounding atmosphere: on exposure to gases, the induced luminescence changes both in the optical intensity and peaks positions. To give specificity against a target analyte, a key feature for an optical sensor, a biomolecular probe, which naturally recognizes its ligand, can be covalently linked to the diatom surface.We explored the photoluminescence emission properties of frustules of Coscinodiscus wailesii centric species, characterized by a diameter of about 100-200 mu m, on exposure to different vapours and in presence of specific bioprobes interacting with target analytes. Very high sensitivities have been observed due to the characteristic morphology of diatoms shells. Particular attention has been devoted to the emission properties of single frustules.

Diatoms are monocellular micro-algae provided with external valves, the frustules, made of amorphous hydrated silica. Frustules present patterns of regular arrays of holes, the areolae, characterized by sub-micrometric dimensions. In particular, frustules from centric diatoms are characterized by a radial disposition of areolae and exhibit several optical properties, such as photoluminescence variations in presence of organic vapors and photonic-crystal-like behaviour as long as propagation of electromagnetic field is concerned. We have studied the transmission of coherent light, at different wavelengths, through single frustules of Coscinodiscus Walesii diatoms, a centric species characterized by a diameter of about 150 μm. The frustules showed the ability to focalize the light in a spot of a few μm2, the focal length depending on the wavelength of the incident radiation. This focusing effect takes place at the centre of the frustule, where no areolae are present and, as it is confirmed by numerical simulations, it is probably due to coherent superposition of unfocused wave fronts coming from the surrounding areolae. Diatoms-based micro-lenses could be used in the production of lensed optical fibers without modifying the glass core and, in general, they could be exploited with success in most of the optical micro-arrays. Diatoms are monocellular micro-algae provided with external valves, the frustules, made of amorphous hydrated silica. Frustules present patterns of regular arrays of holes, the areolae, characterized by sub-micrometric dimensions. In particular, frustules from centric diatoms are characterized by a radial disposition of areolae and exhibit several optical properties, such as photoluminescence variations in presence of organic vapors and photonic-crystal-like behaviour as long as propagation of electromagnetic field is concerned. We have studied the transmission of coherent light, at different wavelengths, through single frustules of Coscinodiscus Walesii diatoms, a centric species characterized by a diameter of about 150 urn. The frustules showed the ability to focalize the light in a spot of a few μm2, the focal length depending on the wavelength of the incident radiation. This focusing effect takes place at the centre of the frustule, where no areolae are present and, as it is confirmed by numerical simulations, it is probably due to coherent superposition of unfocused wave fronts coming from the surrounding areolae. Diatoms-based micro-lenses could be used in the production of lensed optical fibers without modifying the glass core and, in general, they could be exploited with success in most of the optical micro-arrays.

The development of label-free optical biosensors could have a great impact on life sciences as well as on screening techniques for medical and environmental applications. Peptide nucleic acid (PNA) is a nucleic acid analog in which the sugar phosphate backbone of natural nucleic acid has been replaced by a synthetic peptide backbone, resulting in an achiral and uncharged mimic. Due to the uncharged nature of PNA, PNA-DNA duplexes show a better thermal stability respect the DNA-DNA equivalents. In this work, we used an optical biosensor, based on the porous silicon (PSi) nanotechnology, to detect PNA-DNA interactions. PSi optical sensors are based on changes of reflectivity spectrum when they are exposed to the target analytes. The porous silicon surface was chemically modified to covalently link the PNA which acts as a very specific probe for its ligand ( c DNA).

We have fabricated a microarray of porous silicon Bragg reflectors on a crystalline silicon substrate using a technological process based on standard photolithography and electrochemical anodization of the silicon. The array density is of 170 elements/cm(2) and each element has a diameter of 200 mu m. The porous silicon structures have been used as platform to immobilize an amino terminated DNA single strand probe. All fabrication steps have been monitored by spectroscopic reflectometry, optical and electron microscopy, and Fourier transform infrared spectroscopy. A label-free detection method has been employed to investigate the hybridization between micromolar DNA probe and its complementary target. Due to fast and low cost production, good reproducibility, and high quality optical features, this platform could be adopted also for other different microarray applications such as proteomics and medical diagnostics.

Porous silicon based one-dimensional photonic crystals, such as Bragg mirror and optical microcavity, has been modified by infiltration of a new biocompatible polymer, an amino functionalized poly(e-caprolactone) (PCL-NH2), and characterized as optical biochemical sensors. The entrapped polymer adds strong chemical stability to the nanocrystalline matrix on exposure to alkaline solutions preserving the device sensing abilities in monitoring volatile substances and chemical compounds. On the basis of these results, these hybrid structures can be proposed as a high performance platform for biochemical applications.