Search

Respiratory viral infections often mimic the symptoms of infections caused by bacteria; however, restricted and targeted administration of antibiotics is needed to combat growing antimicrobial resistance. This is particularly relevant in low-income settings. In this work, we describe the use of isothermal amplification of viral DNA at 37 °C coupled to a paper-based vertical flow microarray (VFM) setup that utilizes a colorimetric detection of amplicons using functionalized gold nanoparticles. Two oligonucleotide probes, one in-house designed and one known adenoviral probe were tested and validated for microarray detection down to 50 nM using a synthetic target template. Furthermore, primers were shown to function in a recombinase polymerase amplification reaction using both synthetic template and viral DNA. As a proof-of-concept, we demonstrate adenoviral detection with four different adenoviral species associated with respiratory infections using the paper-based VFM format. The presented assay was validated with selected adenoviral species using the in-house probe, enabling detection at 1 ng of starting material with intra- and inter-assay %CV of ≤ 9% and ≤ 13%. Finally, we validate our overall method using clinical samples. Based on the results, the combination of recombinase polymerase amplification, paper microarray analysis, and nanoparticle-based colorimetric detection could thus be a useful strategy towards rapid and affordable multiplexed viral diagnostics. Electronic supplementary material The online version of this article (10.1007/s00216-018-1503-y) contains supplementary material, which is available to authorized users.

The aim of this work was to investigate how manufacturing conditions influence phase-separated films of ethyl cellulose (EC) and hydroxypropyl cellulose (HPC) with different molecular weights of HPC. Two HPC grades, SSL and M, with weight average molecular weights (M

We present a droplet PCR workflow for detection of multiple pathogen DNA biomarkers using fluorescent color-coded Luminex® beads. This strategy enables encoding of multiple singleplex droplet PCRs using a commercially available bead set of several hundred distinguishable fluorescence codes. This workflow provides scalability beyond the limited number offered by fluorescent detection probes such as TaqMan probes, commonly used in current multiplex droplet PCRs. The workflow was validated for three different Luminex bead sets coupled to target specific capture oligos to detect hybridization of three microorganisms infecting poultry: avian influenza, infectious laryngotracheitis virus and Campylobacter jejuni. In this assay, the target DNA was amplified with fluorescently labeled primers by PCR in parallel in monodisperse picoliter droplets, to avoid amplification bias. The color codes of the Luminex detection beads allowed concurrent and accurate classification of the different bead sets used in this assay. The hybridization assay detected target DNA of all three microorganisms with high specificity, from samples with average target concentration of a single DNA template molecule per droplet. This workflow demonstrates the possibility of increasing the droplet PCR assay detection panel to detect large numbers of targets in parallel, utilizing the scalability offered by the color-coded Luminex detection beads.

Cell culture is a ubiquitous and flexible research method. However, it heavily relies on plastic consumables generating millions of tonnes of plastic waste yearly. Plastic waste is a major and growing global concern. Here we describe a new cell culture dish that offers a culture area equivalent to three petri dishes but that is on average 61% lighter and occupies 67% less volume. Our dish is composed of a lid and three thin containers surrounded by a light outer shell. Cell culture can be performed in each of the containers sequentially. The outer shell provides the appropriate structure for the manipulation of the dish as a whole. The prototype was tested by sequentially growing cells in each of its containers. As a control, sequential cultures in groups of 3 petri dishes were performed. No statistical differences were found between the prototype and the control in terms of cell number, cell viability or cell distribution.

The characterization of the pore structure in pharmaceutical coatings is crucial for understanding and controlling mass transport properties and function in controlled drug release. Since the drug release rate can be associated with the film permeability, the effect of the pore structure on the permeability is important to study. In this paper, a new approach for characterizing the pore structure in polymer blended films was developed based on an image processing procedure for given two-dimensional scanning electron microscopy images of film cross-sections. The focus was on different measures for characterizing the complexity of the shape of a pore. The pore characterization developed was applied to ethyl cellulose (EC) and hydroxypropyl cellulose (HPC) blended films, often used as pharmaceutical coatings, where HPC acts as the pore former. It was studied how two different HPC viscosity grades influence the pore structure and, hence, mass transport through the respective films. The film with higher HPC viscosity grade had been observed to be more permeable than the other in a previous study; however, experiments had failed to show a difference between their pore structures. By instead characterizing the pore structures using tools from image analysis, statistically significant differences in pore area fraction and pore shape were identified. More specifically, it was found that the more permeable film with higher HPC viscosity grade seemed to have more extended and complex pore shapes than the film with lower HPC viscosity grade. This result indicates a greater degree of connectivity in the film with higher permeability and statistically confirms hypotheses on permeability from related experimental studies.

Droplet microfluidic platforms have, while enabling high-throughput manipulations and the assaying of single cell scale compartments, been lacking interfacing to allow macro scale access to the output from droplet microfluidic operations. Here, we present a simple and high-throughput method for individually directing cell containing droplets to an addressable and macro scale accessible microwell slide for downstream analysis. Picoliter aqueous droplets containing low gelling point agarose and eGFP expressing Escherichia coli (E. coli) are created in a microfluidic device, solidified to agarose beads and transferred into an aqueous buffer. A Fluorescence activated cell sorter (FACS) is used to sort agarose beads containing cells into microwells in which the growth and expansion of cell colonies is monitored. We demonstrate fast sorting and high accuracy positioning of sorted 15 μm gelled droplet agarose beads into microwells (14 × 48) on a 25 mm × 75 mm microscope slide format using a FACS with a 100 μm nozzle and an xy-stage. The interfacing method presented here enables the products of high-throughput or single cell scale droplet microfluidics assays to be output to a wide range of microtiter plate formats familiar to biological researchers lowering the barriers for utilization of these microfluidic platforms.

A high-throughput method for single cell screening by microfluidic droplet sorting is applied to a whole-genome mutated yeast cell library yielding improved production hosts of secreted industrial enzymes. The sorting method is validated by enriching a yeast strain 14 times based on its α-amylase production, close to the theoretical maximum enrichment. Furthermore, a 10(5) member yeast cell library is screened yielding a clone with a more than 2-fold increase in α-amylase production. The increase in enzyme production results from an improvement of the cellular functions of the production host in contrast to previous droplet-based directed evolution that has focused on improving enzyme protein structure. In the workflow presented, enzyme producing single cells are encapsulated in 20 pL droplets with a fluorogenic reporter substrate. The coupling of a desired phenotype (secreted enzyme concentration) with the genotype (contained in the cell) inside a droplet enables selection of single cells with improved enzyme production capacity by droplet sorting. The platform has a throughput over 300 times higher than that of the current industry standard, an automated microtiter plate screening system. At the same time, reagent consumption for a screening experiment is decreased a million fold, greatly reducing the costs of evolutionary engineering of production strains.

The major aims of this work were to study the effect of the molecular weight (Mw) of ethyl cellulose (EC) on the drug release profile from metoprolol succinate pellets coated with films comprising EC and hydroxypropyl cellulose (HPC) with a weight ratio of 70:30, and to understand the mechanisms behind the different release profiles. A broad range of Mws was used, and the kinetics of drug release and HPC leaching followed. The higher the Mw of EC, the slower the HPC leaching and the drug release processes. Drug release occurred by diffusion through the pores created in the coating by the HPC leaching. A novel method was used to explain the differences in the release profiles: the effective diffusion coefficient (De) of the drug in the coating film was determined using a mechanistic model and compared to the amount of HPC leached. A linear dependence was found between De and the amount of HPC leached and, importantly, the value of the proportionality constant decreased with increasing Mw of EC. This suggests that the Mw of EC affects the drug release profile by affecting the phase separated microstructure of the coating and the hindrance it imparts to drug diffusion.

Hydroxypropyl cellulose (HPC) and ethyl cellulose (EC) can be used for extended release coatings, where the water-soluble HPC may act as a pore former. The aim was to investigate the effect of the molecular weight of HPC on the microstructure and mass transport in phase-separated freestanding EC/HPC films with 30% w/w HPC. Four different HPC grades were used, with weight averaged molecular weights (Mw) of 30.0 (SSL), 55.0 (SL), 83.5 (L) and 365 (M) kg/mol. Results showed that the phase-separated structure changed from HPC-discontinuous to bicontinuous with increasing Mw of HPC. The film with the lowest Mw HPC (SSL) had unconnected oval-shaped HPC-rich domains, leaked almost no HPC and had the lowest water permeability. The remaining higher Mw films had connected complex-shaped pores, which resulted in higher permeabilities. The highest Mw film (M) had the smallest pores and very slow HPC leakage, which led to a slow increase in permeability. Films with grade L and SL released most of their HPC, yet the permeability of the L film was three times higher due to greater pore connectivity. It was concluded that the phase-separated microstructure, the level of pore percolation and the leakage rate of HPC will be affected by the choice of HPC Mw grade used in the film and this will in turn have strong impact on the film permeability.

Background Whole genome amplification (WGA) is a challenging, key step in metagenomic studies of samples containing minute amounts of DNA, such as samples from low biomass environments. It is well known that multiple displacement amplification (MDA), the most commonly used WGA method for microbial samples, skews the genomic representation in the sample. We have combined MDA with droplet microfluidics to perform the reaction in a homogeneous emulsion. Each droplet in this emulsion can be considered an individual reaction chamber, allowing partitioning of the MDA reaction into millions of parallel reactions with only one or very few template molecules per droplet. Results As a proof-of-concept, we amplified genomic DNA from a synthetic metagenome by MDA either in one bulk reaction or in emulsion and found that after sequencing, the species distribution was better preserved and the coverage depth was more evenly distributed across the genomes when the MDA reaction had been performed in emulsion. Conclusions Partitioning MDA reactions into millions of reactions by droplet microfluidics is a straightforward way to improve the uniformity of MDA reactions for amplifying complex samples with limited amounts of DNA. Electronic supplementary material The online version of this article (doi:10.1186/s40168-016-0197-7) contains supplementary material, which is available to authorized users.

We present a novel homogeneous ("mix-incubate-read") droplet microfluidic assay for specific protein detection in picoliter volumes by fluorescence polarization (FP), for the first time demonstrating the use of FP in a droplet microfluidic assay. Using an FP-based assay we detect streptavidin concentrations as low as 500 nM and demonstrate that an FP assay allows us to distinguish droplets containing 5 μM rabbit IgG from droplets without IgG with an accuracy of 95%, levels relevant for hybridoma screening. This adds to the repertoire of droplet assay techniques a direct protein detection method which can be performed entirely inside droplets without the need for labeling of the analyte molecules.

Proteine auf Zelloberflachen sind nutzliche Biomarker fur Krankheiten, allerdings konnten Hochdurchsatzmethoden bisher nur Zellen detektieren, die mindestens einige Hundert Proteine exprimieren. Enzymatische Amplifikation in Tropfchen in einem Mikrofluidikgerat eignet sich zur Messung und Analyse von Biomarkern, die in geringer Konzentration auf einzelnen menschlichen Zellen exprimiert werden. Durch Farbstoffmarkierung der Tropfchen konnen mehrere Proben gleichzeitig analysiert werden.

We demonstrate a concept for how a miniaturized 3-D cell culture in biological extracellular matrix (ECM) or synthetic gels bridges the gap between organ-tissue culture and traditional 2-D cultures. A microfluidic device for 3-D cell culture including microgradient environments has been designed, fabricated, and successfully evaluated. In the presented system stable diffusion gradients can be generated by application of two parallel fluid flows with different composition against opposite sides of a gel plug with embedded cells. Culture for up to two weeks was performed showing cells still viable and proliferating. The cell tracer dye calcein was used to verify gradient formation as the fluorescence intensity in exposed cells was proportional to the position in the chamber. Cellular response to an applied stimulus was demonstrated by use of an adenosine triphosphate gradient where the onset of a stimulated intracellular calcium release also depended on cell position.

In this paper we describe a method that uses the nearly covalent strength biotin–streptavidin interaction to attach a paramagnetic bead of micrometer size to a DNA molecule of nanometer size, scaling up the spatial size of a query DNA strand by a factor of 1000, making it visible to the human eye. The use of magnetic principles enables rapid binding and washing of detector beads, facilitating a readout of amplified DNA sequences in a few minutes. Here we exemplify the method on mitochondrial DNA variations using an array platform. Visual identification and documentation can be performed with an ordinary mobile phone equipped with a built-in camera.

Reverse phase microarrays are useful tools for affinity-based detection in hundreds of samples simultaneously. However, current methods typically require long assay times and fluorescent detection. Here we describe a paper-based Vertical Flow Microarray (VFM) assay as a rapid 8-minute colorimetric alternative for reverse phase microarray analysis. The VFM platform was optimized for detection of IgE with a detection limit of 1.9 μg mL(-1) in whole serum. Optimized conditions were then used to screen 113 serum samples simultaneously for hyper IgE syndrome (hIgE), a rare primary immunodeficiency characterized by elevated levels of IgE. The same set of samples were then analysed with a conventional planar microarray with fluorescent detection for head-to-head testing. Both assays found elevated levels in three out of four hIgE patient samples, whereas no control samples displayed elevated levels in either method. The comparison experiments showed a good correlation between the two assays, as determined from a linear correlation study (Pearson's r = 0.76). Further, the assay-time reduction and reproducibility (intra assay CV = 12.4 ± 4.11%) demonstrate the applicability of the VFM platform for high throughput reverse phase screening.

We investigate the impact of droplet culture conditions on cell metabolic state by determining key metabolite concentrations in S. cerevisiae cultures in different microfluidic droplet culture formats. Control of culture conditions is critical for single cell/clone screening in droplets, such as directed evolution of yeast, as cell metabolic state directly affects production yields from cell factories. Here, we analyze glucose, pyruvate, ethanol, and glycerol, central metabolites in yeast glucose dissimilation to establish culture formats for screening of respiring as well as fermenting yeast. Metabolite profiling provides a more nuanced estimate of cell state compared to proliferation studies alone. We show that the choice of droplet incubation format impacts cell proliferation and metabolite production. The standard syringe incubation of droplets exhibited metabolite profiles similar to oxygen limited cultures, whereas the metabolite profiles of cells cultured in the alternative wide tube droplet incubation format resemble those from aerobic culture. Furthermore, we demonstrate retained droplet stability and size in the new better oxygenated droplet incubation format.

This paper presents a novel method to embed, anchor, and cultivate cells in a controlled 3-D flow-through microenvironment. This is realized using an etched silicon pillar flow chamber filled with extracellular matrix (ECM) gel mixed with cells. At 4 degrees C, while in liquid form, ECM gel is mixed with cells and injected into the chamber. Raising the temperature to 37 degrees C results in a gel, with cells embedded. The silicon pillars both stabilize and increase the surface to volume ratio of the gel. During polymerization the gel shrinks, thus creating channels, which enables perfusion through the chip. The pillars increase the mechanical stability of the gel permitting high surface flow rates without surface modifications. Within the structure cells were still viable and proliferating after 6 days of cultivation. Our method thus makes it possible to perform medium- to long-term cultivation of cells in a controlled 3-D environment. This concept opens possibilities to perform studies of cells in a more physiological environment compared to traditional 2-D cultures on flat substrates.

To explore genome variation meaningfully, there is a critical need for a high-throughput and inexpensive platform for DNA analysis. Pyrosequencing is a nonelectrophoretic bioluminometric DNA sequencing method that uses a four-enzyme mixture reaction to monitor nucleotide incorporation in real time. Currently, the commercialized pyrosequencing technique is limited to a 96-microtiter plate format. However, high throughput and inexpensive pyrosequencing is required to meet the need of screening large numbers of samples. We present here DNA pyrosequencing on a nanoliter-volume microfluidic platform. The microfluidic approach involves the trapping of the DNA on microbeads in an on-chip filter chamber and flow-through of the pyrosequencing reagents to monitor the reaction in real time. Two single-nucleotide polymorphisms were successfully scored to evaluate the microfluidic platform. In addition to significantly reducing reagent costs, microfluidic systems promise to improve the read length by eliminating intermediate product accumulation by constant removal of unincorporated nucleotides and elimination of dilution effects at each reaction cycle in the current plate format. Although only one filter chamber was used in this study, the platform should be readily adaptable to parallel analyses of nanoliter samples using filter chamber arrays to obtain high-throughput DNA analysis.

A microfluidic approach for rapid bioluminescent real-time detection of single nucleotide polymorphism (SNP) is presented. The method is based on single-step primer extension using pyrosequencing chemistry to monitor nucleotide incorporations in real-time. The method takes advantage of the fact that the reaction kinetics differ between matched and mismatched primer-template configurations. We show here that monitoring the initial reaction in real time accurately scores SNPs by comparing the initial reaction kinetics between matched and mismatched configurations. Thus, no additional treatment is required to improve the sequence specificity of the extension, which has been the case for many allele-specific extension assays. The microfluidic approach was evaluated using four SNPs. Three of the SNPs included primer-template configurations that have been previously reported to be difficult to resolve by allele-specific primer extension. All SNPs investigated were successfully scored. Using the microfluidic device, the volume for the bioluminescent assay was reduced dramatically, thus offering a cost-effective and fast SNP analysis method.

We describe a microfluidic approach for allele-specific extension of fluorescently labeled nucleotides for scoring of single-nucleotide polymorphism (SNP). The method takes advantage of the fact that the reaction kinetics differs between matched and mismatched configurations of allele-specific primers hybridized to DNA template. A microfluidic flow-through device for biochemical reactions on beads was used to take advantage of the reaction kinetics to increase the sequence specificity of the DNA polymerase, discriminating mismatched configurations from matched. The volume of the reaction chamber was 12.5 nL. All three possible variants of an SNP site at codon 72 of the p53 gene were scored using our approach. This work demonstrates the possibility of scoring SNP by allele-specific extension of fluorescently labeled nucleotides in a microfluidic flow-through device. The sensitive detection system and easy microfabrication of the microfluidic device enable further miniaturization and production of an array format of microfluidic devices for high-throughput SNP analysis.

In this study, a novel component for microfluidics is introduced. Expandable microspheres have been studied for their application in microfluidics. Two methods for selective immobilization of expandable microspheres without the use of mechanical barriers on silicon, including patterning by photolithography and self-assembly based on surface chemistry have been shown. After the immobilization step the microspheres were expanded thermally. The expansion is irreversible and the volume of the microspheres increases more than 60 times. Patterns of microspheres with features as small as 15 μm have successfully been generated by photolithography. By using self-assembly the microspheres can conveniently be immobilized in monolayers. Future applications of the expandable microspheres can be as fluidic components, such as one-shot valves or micropumps, positioning other microcomponents or to enlarge the surface area.

BACKGROUND Sophisticated equipment, lengthy protocols, and skilled operators are required to perform protein microarray-based affinity assays. Consequently, novel tools are needed to bring biomarkers and biomarker panels into clinical use in different settings. Here, we describe a novel paper-based vertical flow microarray (VFM) system with a multiplexing capacity of at least 1480 microspot binding sites, colorimetric readout, high sensitivity, and assay time of METHOD Affinity binders were deposited on nitrocellulose membranes by conventional microarray printing. Buffers and reagents were applied vertically by use of a flow controlled syringe pump. As a clinical model system, we analyzed 31 precharacterized human serum samples using the array system with 10 allergen components to detect specific IgE reactivities. We detected bound analytes using gold nanoparticle conjugates with assay time of ≤10 min. Microarray images were captured by a consumer-grade flatbed scanner. RESULTS A sensitivity of 1 ng/mL was demonstrated with the VFM assay with colorimetric readout. The reproducibility (CV) of the system was CONCLUSIONS In this proof-of-concept study, we demonstrated that the VFM assay, which combines features from protein microarrays and paper-based colorimetric systems, could offer an interesting alternative for future highly multiplexed affinity point-of-care testing.

Consecutive microcontact printing (µCP) has been developed to enable multiple functionalization of silicon surfaces, such as the immobilization of chiral ligands. The technique involves two subsequent printing steps using unstructured PDMS stamps. The pattern is already defined on the substrate, consisting of etched channels. Hence, no precise alignment is needed between the two printing steps. A carboxylic acid group-containing reagent was initially printed onto the silicon oxide surface and transformed to an anhydride. In the second printing step an ester bond was formed with the hydroxy-functionalized ligand. The formed molecular layers were evaluated by contact angle measurements, SEM and electron spectroscopy for chemical analysis (ESCA), indicating that the consecutive microcontact printing was successful. The channels were then sealed with a low temperature bonding technique using an adhesive PDMS film, which does not destroy the printed ligand.

In this paper, we present a technology for void free low temperature full wafer adhesive bonding of structured wafers. Benzocyclobutene (BCB) is used as the intermediate bonding material. BCB bonds well with various materials and does not release significant amounts of byproducts during the curing process. Thus void-free bond interfaces can be achieved. Cured BCB coatings have an excellent resistance to a variety of acids, alkalines and solvents and a high transparency for light across the visible spectrum, which makes it a good material for fluidic, optical and packaging applications. We demonstrate the fabrication of fluidic structures and the embedding of protruding surface structures. An important finding is that the pre-cured BCB coatings are extremely deformable and have a liquid-like behaviour during bonding.

The suitability of using octafluorocyclobutane (C4F8) patches as hydrophobic valves in microfluidic biochemical applications has been shown. A technique has been developed to generate lithographica ...

Objective To analyze the effect of individual adaptation of the dialysis prescription in continuous ambulatory peritoneal dialysis (CAPD), as compensation for the decline of residual renal function (RRF), on peritoneal (Kpt/V) and total (Kprt/V) urea clearance as well as on peritoneal (Kpcr) and total weekly creatinine clearances (CCr). Design Retrospective analysis of a 2-year period. Patients We analyzed 18 patients [15 male, 3 female; mean age 58.2 (24 – 80) years]. Main Outcome Measures Correlations between increased dialysis prescription and Kpt/V, Kprt/V, and Kpcr. Kprt/V and CCr measurements were based on a 24-hour dialysate and urine collection. Measurements were performed over a time period of 3 to 6 months. Results The results show a linear correlation between Kpt/V and Kpcr and the prescribed volume by kilogram body weight. Kprt/V was increased slightly by increasing the dialysis prescription. Dialysate-to-plasma (D/P) ratios of urea and creatinine remained unchanged. The mean prescribed dialysate volume increased from 7.4 ± 1.1 L to 10.6 ± 2.5 L. Mean Kprt/V could be maintained on a stable level for a 36-month period. Conclusion By adapting the dialysis prescription on an individual basis to the continuous decline of RRF, and taking the patient's body weight into account in the prescription decision, the increases in Kpt/V offset the decline in RRF. We recommend early individualization of prescription for patients on CAPD.

Droplet microfluidics allows the isolation of single cells and reagents in monodisperse picoliter liquid capsules and manipulations at a throughput of thousands of droplets per second. These qualities allow many of the challenges in single-cell analysis to be overcome. Monodispersity enables quantitative control of solute concentrations, while encapsulation in droplets provides an isolated compartment for the single cell and its immediate environment. The high throughput allows the processing and analysis of the tens of thousands to millions of cells that must be analyzed to accurately describe a heterogeneous cell population so as to find rare cell types or access sufficient biological space to find hits in a directed evolution experiment. The low volumes of the droplets make very large screens economically viable. This Review gives an overview of the current state of single-cell analysis involving droplet microfluidics and offers examples where droplet microfluidics can further biological understanding.

Films of ethyl cellulose (EC) and water-soluble hydroxypropyl cellulose (HPC) can be used for extended release coatings in oral formulations. The permeability and microstructure of free EC/HPC films with 30% w/w HPC were studied to investigate effects of EC molecular weight. Phase separation during film spraying and subsequent HPC leaching after immersion in aqueous media cause pore formation in such films. It was found that sprayed films were porous throughout the bulk of the films after water immersion. The molecular weight affected HPC leaching, pore morphology and film permeability; increasing the molecular weight resulted in decreasing permeability. A model to distinguish the major factors contributing to diffusion retardation in porous films showed that the trend in permeability was determined predominantly by factors associated with the geometry and arrangement of pores, independent of the diffusing species. The film with the highest molecular weight did, however, show an additional contribution from pore wall/permeant interactions. In addition, rapid drying and increasing molecular weight resulted in smaller pores, which suggest that phase separation kinetics affects the final microstructure of EC/HPC films. Thus, the molecular weight influences the microstructural features of pores, which are crucial for mass transport in EC/HPC films.

Today, cells are commonly analyzed in ensembles, i.e. thousands of cells per sample, yielding results on the average response of the cells. However, cellular heterogeneity implies the importance of studying how individual cells respond, one by one, in order to learn more about drug targeting and cellular behavior.This review discusses general aspects on miniaturization of biological assays and in particular summarizes single-cell assays in microwell formats. A range of microwell-based chips are discussed with regard to their well characteristics, cell handling, choice of material etc. along with available detection systems for single-cell studies. History and trends in microsystem technology, various commonly used materials for device fabrication, and conventional methods for single-cell analysis are also discussed, before a closing section with a detailed example from our research in the field.A range of miniaturized and microwell devices have shown useful for studying individual cells.In vitro assays offering low volume sampling and rapid analysis in a high-throughput manner are of great interest in a wide range of single-cell applications. Size compatibility between a cell and micron-sized tools has encouraged the field of micro- and nanotechnologies to move into areas such as life sciences and molecular biology. To test as many compounds as possible against a given amount of patient sample requires miniaturized tools where low volume sampling is sufficient for accurate results and on which a high number of experiments per cm(2) can be performed. This article is part of a Special Issue entitled Nanotechnologies - Emerging Applications in Biomedicine.

Breast cancer is the leading cause of cancer deaths among non-smoking women worldwide. At the moment the treatment regime is such that patients receive different chemotherapeutic and/or hormonal treatments dependent on the hormone receptor status, the menopausal status and age. However, in vitro sensitivity testing of tumor biopsies could rationalize and improve the choice of chemo- and hormone therapy. Lab-on-a-Chip devices, using microfluidic techniques, make detailed cellular analysis possible using fewer cells, enabling working with a patients’ own cells and performing chemo- and hormone sensitivity testing in an ex vivo setting. This article describes the development of two microfluidic devices made in poly(dimethylsiloxane) (PDMS) to validate the cell culture properties and analyze the chemosensitivity of MCF-7 cells (estrogen receptor positive human breast cancer cells) in response to the drug staurosporine (SSP). In both cases, cell viability was assessed using the life-stain Calcein-AM (CAAM) and the death dye propidium iodide (PI). MCF-7 cells could be statically cultured for up to 7 days in the microfluidic chip. A 30 min flow with SSP and a subsequent 24 h static incubation in the incubator induced apoptosis in MCF-7 cells, as shown by a disappearance of the aggregate-like morphology, a decrease in CAAM staining and an increase in PI staining. This work provides valuable leads to develop a microfluidic chip to test the chemosensitivity of tumor cells in response to therapeutics and in this way improve cancer treatment towards personalized medicine.

Fluorescently labeled antibodies are very important tools in cell biology, providing for specific and quantitative detection of antigens. To date, fluorophore labeling of antibodies has been performed in solution and has been limited by low-throughput methods requiring a substantial amount of pure antibody sample at a high concentration. We have developed a novel solid-phase labeling protocol for small amounts (i.e. micrograms) of antibodies with fluorescent dyes. Protein A affinity medium was used as solid support in a micropipette tip format. This solid-phase approach, including the advantage of the strong and specific interaction between Protein A and antibodies, allows for simultaneous purification, labeling and concentration of the antibody sample, making it possible to start with unpure antibody samples at low concentrations. We have optimized the protocol with regard to reaction pH, time, temperature and amount of amine reactive dye. In addition, we have evaluated the stability and activity of the labeled antibodies. To evaluate the reproducibility and robustness of this method we labeled eight antibodies with amine reactive fluorescent dyes followed by evaluation of antibody specificity on protein arrays. Interestingly, this gave an extremely high conformity in the degree of labeling, showing the robustness of the method. The solid-phase method also gave predictable and reproducible results and by varying the amount of reactive dye, the desired degree of labeling can easily be achieved. Antibodies labeled using this solid-phase method were similar in stability and activity to antibodies labeled in solution. This novel solid-phase antibody labeling method may also be applicable for other conjugation chemistries and labels, and has potential for high-throughput applications.

This report describes a rapid solid-phase melting curve analysis method for single-nucleotide polymorphism (SNP) genotyping. The melting curve analysis is based on dynamic allele-specific hybridization (DASH). The DNA duplexes are conjugated on beads that are immobilized on the surface of a microheater chip with integrated heaters and temperature sensors. SNP on PCR products were scored, illustrating the sensitivity and robustness of the system. The method is based on random bead immobilization by microcontact printing. Single-bead detection and multiplexing were performed with a heating rate more than 20 times faster than conventional DASH. Analyses that took more than 15 min could be performed in less that 1 min, enabling ultrarapid SNP analysis. In addition, an array version of the chip was implemented enabling the preparation of an array of bead arrays for high-throughput and rapid SNP genotyping.

This paper presents the design, fabrication and first results of a microfluidic cell trap device for analysis of apoptosis. The microfluidic silicon-glass chip enables the immobilization of cells and real-time monitoring of the apoptotic process. Induction of apoptosis, either electric field mediated or chemically induced with tumour necrosis factor (TNF-alpha), in combination with cycloheximide (CHX), was addressed. Exposure of cells to the appropriate fluorescent dyes, FLICA and PI, allows one to discriminate between viable, apoptotic and necrotic cells. The results showed that the onset of apoptosis and the transitions during the course of the cell death cascade were followed in chemically induced apoptotic HL60 cells. For the case of electric field mediated cell death, the distinction between apoptotic and necrotic stage was not clear. This paper presents the first results to analyse programmed cell death dynamics using this apoptosis chip and a first step towards an integrated apoptosis chip for high-throughput drug screening on a single cellular level.

Metal complexes of chiral oxazoline derivatives immobilized on soluble as well as insoluble supports serve as versatile asymmetric catalysts in a variety of applications. In a few cases recovery and reuse of the chiral ligands have been achieved.

In this study, detection of single nucleotide incorporation using the DNA pyrosequencing technique in a microfluidic flow-through device is demonstrated. Pyrosequencing is based on the detection of released pyrophosphate during DNA synthesis. The microfluidic platform allowed detection of single base incorporation, enabling base-by-base DNA sequencing. The miniaturization has lead to a 1000-fold reduction in reagent consumption compared to the present standard volume in pyrosequencing and will hopefully enable reading of longer DNA sequences.

This report describes a microfluidic approach for allele-specific extension of fluorescently labeled nucleotides for scoring of single nucleotide polymorphism (SNP). The method takes advantage on the fact that the reaction kinetic differs between matched and mismatched configurations of allele specific primers hybridized to DNA template. By combining reaction kinetics of the extension reaction and flow kinetics of a microfluidic device, mismatched configurations were discriminated from matched configurations. All three possible variants of a SNP site at codon 72 of the p53 gene were scored using our approach. The result in this work demonstrates the possibility of scoring SNP by allele-specific extension of fluorescently labeled nucleotides in a microfluidic flow-through device. The sensitive detection system and easy microfabrication of the microfluidic device enable further miniaturization and production of an array format of filter-chambers for high throughput SNP analysis.

A novel technique enabling selective bead trapping in microfluidic devices without the use of physical barriers is presented in this paper. It is a fast, convenient and simple method, involving microcontact printing and self-assembly, that can be applied to silicon, quartz or plastic substrates. In the first step, channels are etched in the substrate. The surface chemistry of the internal walls of the channels is then modified by microcontact printing. The chip is submerged in a bead slurry where beads self-assemble based on surface chemistry and immobilize on the internal walls of the channels. Silicon channels (100 microm wide and 50 microm deep) have been covered with monolayers of streptavidin-, amino- and hydroxy-functionalized microspheres and resulted in good surface coverage of beads on the channel walls. A high-resolution pattern of lines of self-assembled streptavidin beads, as narrow as 5 microm, has also been generated on the bottom of a 500 microm wide and 50 microm deep channel. Flow tests were performed in sealed channels with the different immobilized beads to confirm that the immobilized beads could withstand the forces generated by water flowing in the channels. The presented results indicate that single beads can be precisely positioned within microfluidic devices based on self-assembly which is useful as screening and analysis tools within the field of biochemistry and organic chemistry.

A technique for generating a general screening platform consisting of dots of immobilized beads on silicon has been developed via self-sorting and -assembly of different kinds of beads. The dots are defined by a teflon-like film, which due to its hydrophobic characteristics also prevents cross-contamination of liquid from different dots. To enable functionalization of individual dots with different target molecules simultaneously a new way of microcontact printing has been explored where different target solutions are printed in parallel using one stamp. In order to show that this platform can be designed for both biochemical assays and organic chemistry, streptavidin-, amino- and hydroxy-functionalized beads have been self-sorted and -assembled both on separate and common platforms. The self-sorting and -arrangement are based on surface chemistry only, which has not previously been reported. Beads of different sizes and material have successfully been immobilized in line patterns as narrow as 5 mum. Besides silicon, quartz and polyethylene have also been used as substrates.

In this study a novel component for microfluidics is introduced. Expandable microspheres have been studied for their application in microfluidics. Two methods for selective immobilization of expandable microspheres on silicon, including patterning by photolithography and self-assembly based on surface-chemistry has been shown. After the immobilization step the microspheres were expanded thermally. The expansion is irreversible and the volume of the microspheres increases more than 60 times. Patterns of microspheres with features as small as 15 µm have successfully been generated by photolithography. By using self-assembly the microspheres can conveniently be immobilized in a monolayers.

In this work, the principle of allele-specific extension by pyrosequencing reaction was employed to analyze single nucleotide polymorphisms (SNPs) in a micromachined filter-chamber device. Two SNP sites located on chromosome 17p and 9q were selected to evaluate the device. The bead-trapping device enabled analysis of genetic variations by using pyrosequencing chemistry in reaction-chamber volume as small as 12.5 nL. This leads to a 4000 fold reduction of the reagent consumption compared to the present standard volume. The results in this work demonstrate the capability of performing allele-specific extension of SNPs by pyrosequencing chemistry, which opens up the possibilities to perform base-by-base sequencing in this filter-chamber device.

Enzyme kinetics and inhibition is important for a wide range of disciplines including pharmacology, medicine and industrial bioprocess technology. We present a novel microdroplet-based device for extensive characterization of the reaction kinetics of enzyme substrate inhibitor systems in a single experiment utilizing an integrated droplet picoinjector for bioanalysis. This device enables the scanning of multiple fluorescently-barcoded inhibitor concentrations and substrate conditions in a single, highly time-resolved experiment yielding the Michaelis constant (Km), the turnover number (kcat) and the enzyme inhibitor dissociation constants (ki, ki'). Using this device we determine Km and kcat for β-galactosidase and the fluorogenic substrate Resorufin β-D-galactopyranoside (RBG) to be 442 μM and 1070 s(-1), respectively. Furthermore, we examine the inhibitory effects of isopropyl-β-D-thiogalactopyranoside (IPTG) on β-galactosidase. This system has a number of potential applications, for example it could be used to screen inhibitors to pharmaceutically relevant enzymes and to characterize engineered enzyme variants for biofuels production, in both cases acquiring detailed information about the enzyme catalysis and enzyme inhibitor interaction at high throughput and low cost.

In vivo and ex vivo studies of fluorescence from endogenous and exogenous molecules in tissues and cells are common for applications such as detection or characterization of early disease. A systematic determination of the excitation-emission matrices (EEM) of known and putative endogenous fluorophores and a number of exogenous fluorescent photodynamic therapy drugs has been performed in solution. The excitation wavelength range was 250-520 nm, with fluorescence emission spectra collected in the range 260-750 nm. In addition, EEM of intact normal and adenomatous human colon tissues are presented as an example of the relationship to the EEM of constituent fluorophores and illustrating the effects of tissue chromophore absorption. As a means to make this large quantity of spectral data generally available, an interactive database has been developed. This currently includes EEM and also absorption spectra of 35 different endogenous and exogenous fluorophores and chromophores and six photosensitizing agents. It is intended to maintain and extend this database in the public domain, accessible through the Photochemistry and Photobiology website (http://www.aspjournal. com/).

Prevalence of dyslipidemic risk factors in hemodialysis and CAPD patients.BackgroundDyslipidemic factors obviously contribute to the high cardiovascular risk in dialysis patients but are often an underestimated problem. Therefore, we determined the prevalence of dyslipidemic factors in a large group of unselected hemodialysis (N = 564) and CAPD (N = 168) patients.MethodsWe used the recently published recommendations of the Medical Experts Group concerning cardiovascular risk factors for the categorization of dyslipidemic factors. These were total cholesteroverline>200 mg/dL, low-density lipoprotein (LDL) cholesteroverline>100 mg/dL, high-density lipoprotein (HDL) cholesterol 180 mg/dL, and Lp(a)>30 mg/dL.ResultsCAPD patients had, in sum, a markedly worse lipid profile when compared with HD patients. They had higher frequencies of elevated total cholesterol (67% vs. 34%), triglycerides (47% vs. 28%), and Lp(a) concentrations (37% vs. 30%) when compared with HD patients. In both patient groups, about two thirds of the patients had LDL cholesterol above 100 mg/dL and HDL cholesterol below 40 mg/dL. When we analyzed the total frequency of dyslipidemic factors, we observed that the CAPD group included a markedly higher number of patients with three or four concurrent dyslipidemic factors than HD patients (P < 0.001). Furthermore, we analyzed apolipoprotein A-IV (apoA-IV), which was recently shown to be associated with cardiovascular disease, and which was about twice as high in both patient groups when compared with controls (P < 0.001).ConclusionsDyslipidemic risk factors are highly prevalent in dialysis patients, and the concomitant occurrence of several risk factors in a given patient is more often observed in CAPD than HD patients.