Search

Cholangiocytes, biliary epithelial cells, are known to spontaneously self-organize into spherical cysts with a central lumen. In this work, we explore a promising biocompatible stereolithographic approach to encapsulate cholangiocytes into geometrically-controlled 3D hydrogel structures to guide them towards the formation of branched tubular networks. We demonstrate that within the appropriate mix of hydrogels, normal rat cholangiocytes can proliferate, migrate and organize into branched tubular structures, form walls consisting of a cell monolayer, transport fluorescent dyes into the luminal space and show markers of epithelial maturation such as primary cilia. The resulting structures have dimensions typically found in the intralobular and intrahepatic bile ducts and are stable for weeks, without any requirement of bulk supporting material, thereby offering total access to the basal side of these biliary epithelial constructs.

Cholangiocytes, biliary epithelial cells, are known to spontaneously self-organize into spherical cysts with a central lumen. In this work, we explore a promising biocompatible stereolithographic approach to encapsulate cholangiocytes into geometrically controlled 3D hydrogel structures to guide them towards the formation of branched tubular networks. We demonstrate that within the appropriate mix of hydrogels, normal rat cholangiocytes can proliferate, migrate, and organize into branched tubular structures with walls consisting of a cell monolayer, transport fluorescent dyes into the luminal space, and show markers of epithelial maturation such as primary cilia and continuous tight junctions. The resulting structures have dimensions typically found in the intralobular and intrahepatic biliary tree and are stable for weeks, without any requirement of bulk supporting material, thereby offering total access to the external side of these biliary epithelial constructs.

This review summarizes recent advances in micro- and nanopore technologies with a focus on the functionalization of pores using a promising method named contactless electro-functionalization (CLEF). CLEF enables the localized grafting of electroactive entities onto the inner wall of a micro- or nano-sized pore in a solid-state silicon/silicon oxide membrane. A voltage or electrical current applied across the pore induces the surface functionalization by electroactive entities exclusively on the inside pore wall, which is a significant improvement over existing methods. CLEF’s mechanism is based on the polarization of a sandwich-like silicon/silicon oxide membrane, creating electronic pathways between the core silicon and the electrolyte. Correlation between numerical simulations and experiments have validated this hypothesis. CLEF-induced micro- and nanopores functionalized with antibodies or oligonucleotides were successfully used for the detection and identification of cells and are promising sensitive biosensors. This technology could soon be successfully applied to planar configurations of pores, such as restrictions in microfluidic channels.

Customized pores are smart components that find challenging applications in a variety of fields including purification membranes and biosensing systems. The incorporation of recognition probes within pores is therefore a challenge, due to the technical difficulty of delimiting the area functionalized and obtaining the localized, specific chemical modification of pore walls. An innovative approach, named contactless electrofunctionalization (CLEF), is presented to overcome this problem. CLEF allows easy, one-step modification of the inner surface of a pore etched in a dielectric membrane. The pore wall is coated under the influence of an electric field created by the application of a voltage between two electrodes, located near but not in contact with the pore openings. This specific localization of the deposited material within the pore is extremely rapid. Coatings were reliably and reproducibly obtained using polypyrrole co-polymers bearing oligonucleotides, demonstrating that this technology has a promising future in the design of biosensors. Moreover, the versatility of this process allows the deposition of various electroactive entities such as iridium oxide and therefore indicates a strong potential for diverse applications involving porous materials.

Today, microarray fluorescence detection is still limited because a great proportion of hybrids remain undetectable. In this paper we describe sol-gel optical multilayers (stacks of low- and high-index layers) deposited on glass slides which increase the fluorescence of DNA microarrays and favour the detection of fluorescent targets. An alternative to the expensive and time-consuming physical vapour deposition technology is proposed. It is a low-cost sol-gel coating of glass slides, each layer being made by "dipping" (alternatively in SiO2 or TiO2 solutions), "draining and drying". After the selection of the best surface layer of the substrates, the multilayer mirrors modelled for one (Cy3) or two (Cy3 and Cy5) fluorophores are spotted with a series of Yeast probes and compared to similar microarrays on standard glass slides through hybridisation experiments. The fluorescence images of the mirrors show increased signals for all the probes. The enhancement factors determined for Cy3 and for Cy3/Cy5 mirrors (10-12 and 4-5, respectively) are consistent with the initial modelling. This allows the assessment of the basal expression levels of Yeast low-expressed genes. Moreover, these substrates show a noticeable increase in sensitivity for induction/repression ratio measurements in differential gene expression experiments. So, they could be considered as promising tools for the analysis of small biological samples.

Successful development of cell-on-chip microsystems where living cells are deposited and grown in microfabricated structures is highly dependent on the control of cell/substrate interactions. In this study, several materials of interest were tested for CHO cell growth and morphology: (i) glass, fibronectin-, poly-L-lysine- and 3-aminopropyltriethoxysilane (APTES)--treated glass and UV/O(3)-modified PDMS coating on glass as well as (ii) silicon, poly-L-lysine-, APTES-, O(2) plasma-treated and oxide-coated silicon. In addition, we quantitatively characterized cell adhesion to these substrates using a radial flow detachment assay. Lack of correlation between cell adhesion and cell morphology was systematically observed for all substrates. In particular, we show that PDMS coatings on glass can be finely tuned by UV/O(3) treatment to enhance cell adhesion and induce elongated morphology. Moreover, we observed a low shear stress cell detachment mechanism on silicon oxide coatings on silicon wafers. It is therefore possible with these coatings to selectively influence either cell adhesion or morphology.

An efficient synthesis of new type fluorescent amino acids is described. The Fmoc-protected dyes can be prepared in a four-step procedure with approximately 30% overall yield from aminofluoresceins and other inexpensive commercially available precursors. The dyes are much more photostable compared to fluorescein and exhibit constant pH-independent fluorescence that is advantageous in biological applications. The Fmoc-protected fluorescent amino acids are ready for use in solid phase peptide synthesis. As a proof of concept, a fluorogenic papain substrate was synthesized and employed for on-bead detection of the protease activity. By using a novel technique for quantitative analysis of bead fluorescence, a approximately 2.7-fold increase in mean bead brightness was measured and was attributed to substrate cleavage by papain. The new type fluorescent amino acids seem to be a promising tool for the synthesis of fluorescent peptide ligands and fluorogenic protease substrates.

A simple way for photochemical patterning of biological molecules onto the inner wall of fused-silica capillary is described. The method is based on a modification of the inner capillary surface with photoactive benzophenone (BP) derivative. The UV irradiation at 365 nm of the capillary filled with a sample solution results in cross-linking of the solutes to the BP moiety via a stable covalent bond. As a proof of concept, oligonucleotides and proteins were arrayed inside the capillary using an inverted microscope as an irradiation device. We demonstrated that the capillary arrays produced in this way are functional and could be used in different bioassays including DNA hybridization, protein interaction studies, and immunoassays. Having a sensitivity comparable to the fluorophore-based assays in a planar format, the capillary array possesses several advantages including submicroliter sample volume and a short assay time. The capillary format should therefore be considered as a possible alternative to a planar format in a number of low-density array applications such as mutation detection and diagnostic immunoassays.

In microarrays experiments, a serious limitation is the unreliability of low signal intensities data and the lack of reproducibility for the resulting ratios between samples and controls. Most of the light emitted by a fluorophore at the air/glass interface of a glass slide is absorbed by the glass so just a part of the emitted fluorescence is detected. To improve the sensitivity of the fluorescence detection of both common fluorophores Cy3 and Cy5 in DNA microarrays and fluorescent cell analyses, we have designed a multi layer mirror with alternative thin layers of SiO 2 and HfO 2 . This mirror (MOTL) prevents fluorescence absorption, allows the simultaneous enhancement of the fluorescence signals and increases the dynamic range of the slides. Using MOTL slides, Cy3 and Cy5 intensities are enhanced by 5–8-fold, consequently, the fluorescence analysis becomes easier and should allow the detection of low copy number genes or weakly fluorescent cells. With the same approach, other multiple optical thin layer slides could be designed for other series of fluorophores, extending the field of their applications.

This work describes the in situ synthesis of oligonucleotide arrays on glass surfaces. These arrays are composed of features defined and separated by differential surface tension (surface tension arrays). Specifically, photolithographic methods were used to create a series of spatially addressable, circular features containing an amino-terminated organosilane coupled to the glass through a siloxane linkage. Each feature is bounded by a perfluorosilanated surface. The differences in surface energies between the features and surrounding zones allow for chemical reactions to be readily localized within a defined site. The aminosilanation process was analyzed using contact angle, X-ray photoelectron spectroscopy (XPS), and time-of-flight/secondary ion mass spectroscopy (TOF-SIMS). The efficiency of phosphoramidite-based oligonucleotide synthesis on these surface tension arrays was measured by two methods. One method, termed step-yields-by-hybridization, indicates an average synthesis efficiency for all four (A,G,C,T) bases of 99.9 +/- 1.1%. Step yields measured for the individual amidite bases showed efficiencies of 98.8% (dT), 98.0% (dA), 97.0% (dC), and 97.6% (dG). The second method for determining the amidite coupling efficiencies was by capillary electrophoresis (CE) analysis. Homopolymers of dT (40- and 60mer), dA (40mer), and dC (40mer) were synthesized on an NH(4)OH labile linkage. After cleavage, the products were analyzed by CE. Synthesis efficiencies were calculated by comparison of the full-length product peak with the failure peaks. The calculated coupling efficiencies were 98.8% (dT), 96.8% (dA), and 96.7% (dC).

International audience; Planar patch-clamp is a two-dimensional variation of traditional patch-clamp. By contrast to classical glass micropipette, the seal quality of silicon patch-clamp chips (i.e. seal resistance and seal success rate) have remained poor due to the planar geometry and the nature of the substrate and thus partially obliterate the advantages related to planar patch-clamp. The characterization of physical parameters involved in seal formation is thus of major interest. In this paper, we demonstrate that the physical characterization of surfaces by a set of techniques (Atomic Force Microscopy (AFM), Scanning Electron Microscopy (SEM), X-ray Photoelectron Spectroscopy (XPS), surface energy (polar and dispersive contributions), drop angles, impedance spectroscopy, combined with a statistical design of experiments (DOE)) allowed us discriminating chips that provide relevant performances for planar patch-clamp analysis. Analyses of seal quality demonstrate that dispersive interactions and micropore size are the most crucial physical parameters of chip surfaces, by contrast to surface roughness and dielectric membrane thickness. This multi-scale study combined with electrophysiological validation of chips on a diverse set of cell-types expressing various ion channels (IRK1, hERG and hNa(v)1.5 channels) unveiled a suitable patch-clamp chip candidate. This original approach may inspire novel strategies for selecting appropriate surface parameters dedicated to biochips.

We report the fabrication of a thin silicon membrane with an array of micrometer and submicrometer pores that acts as a scaffold for suspending a lipid bilayer. We successfully deposited a lipid bilayer by the Langmuir-Blodgett method on a synthetic silicon membrane bearing arrays of pores with sizes of 1000, 650, and 300 nm. Topographic images obtained by AFM showed a suspended lipid film spanning the pores, whatever the pore size. Higher stability of bilayers supported on smaller pores was shown by AFM characterization. These results represent an important first step to creating a biomimetic environment to study cell membrane dynamics and/or in developing a biosensor.

The synthesis of a new type of fluorogenic ester substrates is described. Prepared from fluorescein in three steps with common commercially available precursors, they all generate bright green fluorescence upon proteolysis. Their particular structure allows the same substrate be used to report enzymatic activity of various proteases from serine and cysteine superfamilies. The substrate cleavage is sensitive to specific protease inhibitors providing a tool for inhibitor screening.

International audience; We demonstrate the optical manipulation of cells and dielectric particles on the surface of silicon nitride waveguides. Glass particles with 2μm diameter are propelled at velocities of 15μm/s with a guided power of 20mW. This is approximately 20 times more efficient than previously reported, and permits to use this device on low refractive index objects such as cells. Red blood cells and yeast cells can be trapped on the waveguide and pushed along it by the action of optical forces. This kind of system can easily be combined with various integrated optical structures and opens the way to the development of new microsystems for cell sorting applications.