Search

Effects of pH adjustment on physicochemical properties of microfiltration retentates of skim milk and rehydration of resulting micellar casein concentrate (MCC) powders were investigated. Aliquots of retentate (pH 6.9) were adjusted to pH 7.3, 7.6 or 7.6 followed by readjustment to pH 6.9 (6.9R) prior to powder preparation. The retentates with pH 6.9, 7.3, and 7.6 had casein micelle size of 179, 189 and 197 nm, respectively, while sample 6.9R had size of 183 nm, similar to retentate at pH 6.9. Higher retentate pH resulted in lower ionic calcium and higher conductivity, with sample 6.9R having higher values for both parameters than the pH 6.9 sample. The MCC powders displayed poorer wettability and enhanced dispersibility with increasing retentate pH. Interestingly, the 6.9R powder had the best wettability and dispersibility. This study demonstrated that pH-mediated modifications of the physicochemical properties of retentates improve the rehydration properties of resultant MCC powders.

Ge1−xSnx alloys with substantial incorporation of Sn show promise as direct bandgap group IV semiconductors. This article reports the influence of growth kinetics on Sn inclusion in Ge1−xSnx alloy nanowires through manipulation of the growth constraints, i.e. temperature, precursor type and catalyst. Ge1−xSnx nanowire growth kinetics were manipulated in a vapour–liquid–solid (VLS) growth process by varying the growth temperature between 425 and 470 °C, using Au and Ag alloys as growth catalysts and different tin precursors such as allyltributytin, tertaethyltin and tetraallyltin. The profound impact of growth kinetics on the incorporation of Sn; from 7 to 9 at%; in Ge1−xSnx nanowires was clearly apparent, with the fastest growing nanowires (of comparable diameter) containing a higher amount of Sn. A kinetically dependent “solute trapping” process was assigned as the primary inclusion mechanism for Sn incorporation in the Ge1−xSnx nanowires. The participation of a kinetic dependent, continuous Sn incorporation process in the single-step VLS nanowire growth resulted in improved ordering of the Ge1−xSnx alloy lattice; as opposed to a randomly ordered alloy. The amount of Sn inclusion and the Sn impurity ordering in Ge1−xSnx nanowires has a profound effect on the quality of the light emission and on the directness of the band gap as confirmed by temperature dependent photoluminescence study and electron energy loss spectroscopy.

Germanium is an indirect semiconductor which attracts particular interest as an electronics and photonics material due to low indirect-to-direct band separation. In this work we bend the bands of Ge by means of biaxial tensile strain in order to achieve a direct band gap. Strain is applied by growth of Ge on a lattice mismatched InGaAs buffer layer with variable In content. Band structure is studied by photoluminescence and photoreflectance, giving the indirect and direct bands of the material. Obtained experimental energy band values are compared with a $\mathbf{k}\ifmmode\cdot\else\textperiodcentered\fi{}\mathbf{p}$ simulation. Photoreflectance spectra are also simulated and compared with the experiment. The obtained results indicate direct band structure obtained for a Ge sample with $1.94%$ strain applied, with preferable $\mathrm{\ensuremath{\Gamma}}$ valley to heavy hole transition.

The growth, structural and optical properties, and energy band alignments of tensile-strained germanium (ε-Ge) epilayers heterogeneously integrated on silicon (Si) were demonstrated for the first time. The tunable ε-Ge thin films were achieved using a composite linearly graded InxGa1-xAs/GaAs buffer architecture grown via solid source molecular beam epitaxy. High-resolution X-ray diffraction and micro-Raman spectroscopic analysis confirmed a pseudomorphic ε-Ge epitaxy whereby the degree of strain varied as a function of the In(x)Ga(1-x)As buffer indium alloy composition. Sharp heterointerfaces between each ε-Ge epilayer and the respective In(x)Ga(1-x)As strain template were confirmed by detailed strain analysis using cross-sectional transmission electron microscopy. Low-temperature microphotoluminescence measurements confirmed both direct and indirect bandgap radiative recombination between the Γ and L valleys of Ge to the light-hole valence band, with L-lh bandgaps of 0.68 and 0.65 eV demonstrated for the 0.82 ± 0.06% and 1.11 ± 0.03% strained Ge on Si, respectively. Type-I band alignments and valence band offsets of 0.27 and 0.29 eV for the ε-Ge/In(0.11)Ga(0.89)As (0.82%) and ε-Ge/In(0.17)Ga(0.83)As (1.11%) heterointerfaces, respectively, show promise for ε-Ge carrier confinement in future nanoscale optoelectronic devices. Therefore, the successful heterogeneous integration of tunable tensile-strained Ge on Si paves the way for the design and implementation of novel Ge-based photonic devices on the Si technology platform.

In this work we study Ge structures grown on silicon substrates. We use photoluminescence and photoreflectance to determine both direct and indirect gap of Ge under tensile strain. The strain is induced by growing the Ge on an InGaAs buffer layer with variable In content. The band energy levels are modeled by a 30 band k·p model based on first principles calculations. Characterization techniques show very good agreement with the calculated energy values.

The development of non-equilibrium group IV nanoscale alloys is critical to achieving new functionalities, such as the formation of a direct bandgap in a conventional indirect bandgap elemental semiconductor. Here, we describe the fabrication of uniform diameter, direct bandgap Ge1−xSnx alloy nanowires, with a Sn incorporation up to 9.2 at.%, far in excess of the equilibrium solubility of Sn in bulk Ge, through a conventional catalytic bottom-up growth paradigm using noble metal and metal alloy catalysts. Metal alloy catalysts permitted a greater inclusion of Sn in Ge nanowires compared with conventional Au catalysts, when used during vapour–liquid–solid growth. The addition of an annealing step close to the Ge-Sn eutectic temperature (230 °C) during cool-down, further facilitated the excessive dissolution of Sn in the nanowires. Sn was distributed throughout the Ge nanowire lattice with no metallic Sn segregation or precipitation at the surface or within the bulk of the nanowires. The non-equilibrium incorporation of Sn into the Ge nanowires can be understood in terms of a kinetic trapping model for impurity incorporation at the triple-phase boundary during growth., Direct band gap nanostructures compatible with Si-based electronics are actively investigated. Here, Biswas et al. incorporate unusually large amounts of tin in germanium nanowires by non-equilibrium kinetic trapping, and optical characterizations suggest that the nanowires exhibit a direct band gap.

In this work we study Ge transistor structures grown on silicon substrate. We use photoluminescence to determine the band gap of Ge under tensile strain. The strain is induced by growing Ge on an InGaAs buffer layer with variable In content. The band energy levels are modeled using a 30 band k·p model based on first principles calculations. Photoluminescence measurements show a reasonable correspondence with calculated values of the band energies.

Tunable tensile-strained germanium (epsilon-Ge) thin films on GaAs and heterogeneously integrated on silicon (Si) have been demonstrated using graded III-V buffer architectures grown by molecular beam epitaxy (MBE). epsilon-Ge epilayers with tunable strain from 0% to 1.95% on GaAs and 0% to 1.11% on Si were realized utilizing MBE. The detailed structural, morphological, band alignment and optical properties of these highly tensile-strained Ge materials were characterized to establish a pathway for wavelength-tunable laser emission from 1.55 μm to 2.1 μm. High-resolution X-ray analysis confirmed pseudomorphic epsilon-Ge epitaxy in which the amount of strain varied linearly as a function of indium alloy composition in the InxGa1-xAs buffer. Cross-sectional transmission electron microscopic analysis demonstrated a sharp heterointerface between the epsilon-Ge and the InxGa1-xAs layer and confirmed the strain state of the epsilon-Ge epilayer. Lowtemperature micro-photoluminescence measurements confirmed both direct and indirect bandgap radiative recombination between the Γ and L valleys of Ge to the light-hole valence band, with L-lh bandgaps of 0.68 eV and 0.65 eV demonstrated for the 0.82% and 1.11% epsilon-Ge on Si, respectively. The highly epsilon-Ge exhibited a direct bandgap, and wavelength-tunable emission was observed for all samples on both GaAs and Si. Successful heterogeneous integration of tunable epsilon-Ge quantum wells on Si paves the way for the implementation of monolithic heterogeneous devices on Si.