Search

Organosolv pulping performed in a high-pressure Soxhlet extractor using carbon dioxide as a mild and recyclable acid is described. The system reached a liquid to wood ratio of 6.6 yielding 43 wt% of dissolving grade quality pulp from Populus trichocarpa. The set-up enabled to run reductive catalytic fractionation to yield a lipophilic lignin oil without affecting the performance nor the purity of the final pulp.

Lignin is an abundant polymeric renewable material and thus a promising candidate for incorporation in various commercial thermoplastic polymers. One challenge is to increase the dispersibility of amphiphilic lignin in lipophilic thermoplastic polymers We altered Kraft lignin using widely available and renewable fatty acids, such as oleic acid, yielding more than 8 kg of lignin ester as a light brown powder. SEC showed a molecular weight of 5.8 kDa with a PDI = 3.80, while the Tg of the lignin ester was concluded to 70 °C. Furthermore, the lignin ester was incorporated (20%) into PLA, HDPE, and PP to establish the thermal and mechanical behavior of the blends. DSC and rheological measurements suggest that the lignin ester blends consist of a phase-separated system. The results demonstrate how esterification of lignin allows dispersion in all the evaluated thermoplastic polymers maintaining, to a large extent, the tensile properties of the original material. The impact strength of HDPE and PLA blends show substantial loss upon the addition of the lignin ester. Reconverting the acetic acid side stream into acetic anhydride and reusing the catalyst, the presented methodology can be scaled up to produce a lignin-based substitute to fossil materials.

By extracting lignin, pulp production can be increased without heavy investments in a new recovery boiler, the typical bottleneck of a pulp mill. The extraction is performed by using 0.20 and 0.15 weight equivalents of CO2 and H2SO4 respectively. Herein, we describe lignin esterification with fatty acids using benign reagents to generate a lignin ester mixable with gas oils. The esterification is accomplished by activating the fatty acid and lignin with acetic anhydride which can be regenerated from the acetic acid recycled in this reaction. The resulting mass balance ratio is fatty acid/lignin/acetic acid (2 : 1 : 0.1). This lignin ester can be hydroprocessed to generate hydrocarbons in gasoline, aviation, and diesel range. A 300‐hour continuous production of fuel was accomplished. By recirculating reagents from both the esterification step and applying a water gas shift reaction on off‐gases from the hydroprocessing, a favorable overall mass balance is realized., My my, hey hey, out of the black: By extracting Kraft lignin from black liquor, a pulp mill can increase the production of pulp without heavy investments. By a benign organocatalytic transformation, this lignin is converted into a lignin oil that and processed in a current oil refinery infrastructure to yield gasoline and aviation and diesel fuels.

Herein, a catalytic reductive fractionation of lignocellulose is presented using a heterogeneous cobalt catalyst and formic acid or formate as a hydrogen donor. The catalytic reductive fractionation of untreated birch wood yields monophenolic compounds in up to 34 wt % yield of total lignin, which corresponds to 76 % of the theoretical maximum yield. Model compound studies revealed that the main role of the cobalt catalyst is to stabilize the reactive intermediates formed during the organosolv pulping by transfer hydrogenation and hydrogenolysis reactions. Additionally, the cobalt catalyst is responsible for depolymerization reactions of lignin fragments through transfer hydrogenolysis reactions, which target the β-O-4' bond. The catalyst could be recycled three times with only negligible decrease in efficiency, showing the robustness of the system.

A series of phenolic bio-oil components were selectively hydrodearomatized by palladium on carbon into the corresponding ketones or alcohols in excellent yields using polymethylhydrosiloxane and wa ...