Search

The inherent reactivity of lignin in conventional biomass processing commonly prevents isolation of native lignin and limits monomer yields from catalytic depolymerization strategies that target aryl-ether bonds. Here we show that flow-through solvolysis with methanol at 225 °C produces native-like lignin from poplar, enabling the study of intrinsic lignin properties and evaluation of steady-state lignin depolymerization processes.

Correction for ‘Flow-through solvolysis enables production of native-like lignin from biomass’ by David G. Brandner et al., Green Chem., 2021, 23, 5437–5441, DOI: 10.1039/D1GC01591E.

Lignocellulosic biomass offers the potential to produce renewable fuels at a scale commensurate with petroleum consumption. Hybrid approaches that combine biological and chemocatalytic processes have garnered increasing attention due to their flexibility for feedstock utilization and diversity of potential products. Of note, lignocellulosic sugars can be converted biologically to short-chain carboxylic acids, while subsequent chemocatalytic upgrading can elongate the carbon backbone and remove oxygen from the structure to produce drop-in hydrocarbon fuels. However, hybrid conversion processes are typically not designed with the fuel properties in mind a priori. In this work, we apply a “fuel property first” design approach to produce a tailored hydrocarbon bioblendstock with lower intrinsic sooting and drop-in diesel fuel potential. Initially, model predictions for six fuel properties critical to diesel applications (physicochemical requirements, energy content, safety considerations, autoignition ability, and sooting tendency) were used to screen an array of hydrocarbons accessible from upgrading individual and mixed C2/C4 acids. This screening step allowed for down-selection to a non-cyclic branched C14 hydrocarbon (5-ethyl-4-propylnonane) that can be synthesized from butyric acid through sequential catalytic reactions of acid ketonization, ketone condensation, and hydrodeoxygenation. Following evaluation of each conversion step with model compounds, butyric acid was then converted through an integrated catalytic process scheme to achieve >80% overall carbon yield to a hydrocarbon mixture product containing >60% of the target C14 hydrocarbon. The potential of this conversion strategy to produce a hydrocarbon diesel bioblendstock from lignocellulosic biomass was then demonstrated using corn stover-derived butyric acid produced from Clostridium butyricum fermentation. Experimental fuel property testing of the purified C14 blendstock validated the majority of the fuel property model predictions, including

Lignin solvolysis from the plant cell wall is the critical first step in lignin depolymerization processes involving whole biomass feedstocks. However, little is known about the coupled reaction kinetics and transport phenomena that govern the effective rates of lignin extraction. Here, we report a validated simulation framework that determines intrinsic, transport-independent kinetic parameters for the solvolysis of lignin, hemicellulose, and cellulose upon incorporation of feedstock characteristics for the methanol-based extraction of poplar as an example fractionation process. Lignin fragment diffusion is predicted to compete on the same time and length scales as reactions of lignin within cell walls and longitudinal pores of typical milled particle sizes, and mass transfer resistances are predicted to dominate the solvolysis of poplar particles that exceed approximately 2 mm in length. Beyond the approximately 2 mm threshold, effectiveness factors are predicted to be below 0.25, which implies that pore diffusion resistances may attenuate observable kinetic rate measurements by at least 75 % in such cases. Thus, researchers are recommended to conduct kinetic evaluations of lignin-first catalysts using biomass particles smaller than approximately 0.2 mm in length to avoid feedstock-specific mass transfer limitations in lignin conversion studies. Overall, this work highlights opportunities to improve lignin solvolysis by genetic engineering and provides actionable kinetic information to guide the design and scale-up of emerging biorefinery strategies.

Co-production of high-value chemicals such as succinic acid from algal sugars is a promising route to enabling conversion of algal lipids to a renewable diesel blendstock. Biomass from the green alga Scenedesmus acutus was acid pretreated and the resulting slurry separated into its solid and liquor components using charged polyamide induced flocculation and vacuum filtration. Over the course of a subsequent 756 hours continuous fermentation of the algal liquor with Actinobacillus succinogenes 130Z, we achieved maximum productivity, process conversion yield, and titer of 1.1 g L−1 h−1, 0.7 g g−1 total sugars, and 30.5 g L−1 respectively. Succinic acid was recovered from fermentation media with a yield of 60% at 98.4% purity while lipids were recovered from the flocculated cake at 83% yield with subsequent conversion through deoxygenation and hydroisomerization to a renewable diesel blendstock. This work is a first-of-its-kind demonstration of a novel integrated conversion process for algal biomass to produce fuel and chemical products of sufficient quality to be blend-ready feedstocks for further processing.

© The Royal Society of Chemistry 2018. Lignin conversion to renewable chemicals is a promising means to improve the economic viability of lignocellulosic biorefineries. Alkaline aerobic oxidation of lignin has long been employed for production of aromatic compounds such as vanillin and syringaldehyde, but this approach primarily focuses on condensed substrates such as Kraft lignin and lignosulfonates. Conversely, emerging lignocellulosic biorefinery schemes enable the production of more native-like, reactive lignin. Here, we revisit alkaline aerobic oxidation of highly reactive lignin substrates to understand the impact of reaction conditions and catalyst choice on product yield and distribution. The oxidation of native poplar lignin was studied as a function of temperature, NaOH loading, reaction time, and oxygen partial pressure. Besides vanillin and syringaldehyde, other oxidation products include acetosyringone and vanillic, syringic, and p-hydroxybenzoic acids. Reactions with vanillin and syringaldehyde indicated that these compounds are further oxidized to non-aromatic carboxylic acids during alkaline aerobic oxidation, with syringaldehyde being substantially more reactive than vanillin. The production of phenolic compounds from lignin is favored by high NaOH loadings and temperatures, but short reaction times, as the products degrade rapidly, which is further exacerbated by the presence of oxygen. Under optimal conditions, a phenolic monomer yield of 30 wt% was obtained from poplar lignin. Testing a range of catalysts showed that Cu-containing catalysts, such as CuSO4 and LaMn0.8Cu0.2O3, accelerate product formation; specifically, the catalyst does not increase the maximum yield, but expands the operating window in which high product yields are obtainable. We also demonstrate that other native and isolated lignin substrates that are significantly chemically modified are effectively converted to phenolic compounds. Finally, alkaline aerobic oxidation of native lignins was compared to nitrobenzene oxidation and reductive catalytic fractionation, as these methods constitute suitable benchmarks for lignin depolymerization. While nitrobenzene oxidation achieved a somewhat higher yield, similar monomer yields were obtained through RCF and alkaline aerobic oxidation, especially for lignins with a high guaiacyl- and/or p-hydroxyphenyl-content, as syringyl units are more unstable during oxidation. Overall, this study highlights the potential for aerobic lignin oxidation revisited on native-like lignin substrates.

Polyacrylonitrile (PAN) is the most widely utilized precursor for carbon fiber (CF) production. Though the CF market is growing, increased adoption is impeded by the high cost of the primary raw material, acrylonitrile (AN). AN is manufactured today via propylene ammoxidation, which produces several byproducts (hydrogen cyanide, acetonitrile, acrolein) that require multi-step separations to produce polymerization-grade AN. Recently, a new approach to manufacture bio-based AN from sugars was proposed based on catalytic nitrilation, which produces AN from C3-acrylate esters at >98% yield with alcohol and water as coproducts. The proposed nitrilation process included a 2-stage separation and purification scheme for AN recovery. Here, we hypothesize that in addition to offering a green alternative to propylene ammoxidation with higher product yield, nitrilation of methyl acrylate to produce AN could also enable direct AN polymerization without the proposed separation steps, since water can act as the solvent and MeOH as the chain transfer agent (CTA). Because AN, water, and MeOH form a ternary azeotrope, the heat duty required for separation is substantial and removal of this separation step reduces the heat demand significantly. To that end, we report AN polymerization via emulsion polymerization in aqueous methanol at varying concentrations of CTA. High molecular weight, low polydispersity (e.g., 331.7 kDa, PDI = 1.88) PAN copolymers were produced from AN–MeOH–water emulsions, in the absence of additional CTAs. These PAN copolymers demonstrated thermal properties and carbon mass yields comparable to PAN copolymers prepared via conventional emulsion polymerization. By polymerizing AN in aqueous MeOH, the alcohol acts as the CTA, obviating the need for toxic, malodorous thiol-based CTAs (mercaptans). Utilizing the MeOH coproduct as the CTA results in a substantial heat demand reduction for the overall nitrilation process by 35%, leading to a 40% reduction imported process electricity demand, as the heat-intensive distillation steps required post-ammoxidation and previously proposed post-nitrilation are avoided. This polymerization method offers the opportunity to reduce the energy requirements of renewable AN production to improve both the sustainability and overall economics of bio-based CF precursor production.

The economics of chemical and biological processes is often dominated by the expense of downstream product separations from dilute product streams. Continuous separation techniques, such as in situ product recovery (ISPR), are attractive in that they can concentrate products from a reactor and minimize solvent loss, thereby increasing purity and sustainability of the process. In bioprocesses, ISPR can have an additional advantage of increasing productivity by alleviating product inhibition on the microorganism. In this work, we developed a liquid–liquid extraction (LLE)-based ISPR system integrated with downstream distillation to selectively purify free carboxylic acids, which were selected as exemplary bioproducts due to their ability to be produced at industrially relevant titers and productivities. Equilibrium constants for the extraction of carboxylic acids into a phosphine-oxide based organic phase were experimentally determined. Complete recovery of acids from the extractant and recyclability of the organic phase were demonstrated through multiple extraction–distillation cycles. Using these data, an equilibrium model was developed to predict the acid loading in the organic phase as a function of the extraction equilibrium constant, initial aqueous acid concentration, pH, organic to aqueous volume ratio, and temperature. A distillation process model was then used to predict the energy input required to distill neat acid from an organic phase as a function of the acid loading in the organic phase feed. The heat integrated distillation train can achieve neat recovery of acetic acid with an energy input of 2.6 MJ kg−1 of acetic acid. This LLE-based ISPR system integrated with downstream distillation has an estimated carbon footprint of less than 0.36 kg CO2 per kg of acetic acid, and provides a green approach to enable both new industrial bioprocesses, and process intensification of existing industrial operations by (1) increasing the productivity and titer of the bioprocess via decreasing end-product inhibition, (2) minimizing downstream separation energy input to less than 20% of the heating value of the product, and (3) generating no waste products.

A sweet source to make acrylonitrile Much of the attention directed toward displacing petroleum feedstocks with biomass has focused on fuels. However, there are also numerous opportunities in commodity chemical production. One such candidate is acrylonitrile, a precursor to a wide variety of plastics and fibers that is currently derived from propylene. Karp et al. efficiently manufactured this compound from an ester (ethyl 3-hydroxypropanoate) that can be sourced renewably from sugars. The process relies on inexpensive titania as a catalyst and avoids the side production of cyanide that accompanies propylene oxidation. Science , this issue p. 1307