Search

Antioxidant activity was measured by ferric reducing ability of plasma (FRAP) assay in seven types of infusions prepared from commercial dried berry fruit products: Rosa canina, Vaccinium vitis-idaea, Hiphophae rhamnoides, Hibiscus sabdariffa and three fruit mixtures. Total polyphenols (TP), total anthocyanins and the polyphenolic compounds were determined by HPLC equipped with diode array detector. To estimate the amount of elements released from fruits into the water extracts, levels of Fe, Mn, Zn and Cu in dried samples and in infusions were determined by flame atomic absorption spectrometry. The correlation between polyphenols content and the antioxidant activities and the microelements in the infusions and the antioxidant activities were estimated using the Pearson’s correlation test. The results showed a high, positive and significant correlation (r = 0.9465) between the FRAP values and TP content, meaning that the concentration of phenolic compounds may be a good indicator of the reducing capacity in the infusions. Correlations varied (positive, negative and weak) between antioxidant and mineral extractability of berry infusions. Among the polyphenolic compounds, gallic acid contributed particularly to the antioxidant capacity of the studied samples (r = 0.563). The correlation of antioxidants, total polyphenols with mineral extractability showed the influence of antioxidant compound on mineral bioavailability.

This paper examines the use of multisensory virtual reality (VR) as a novel approach in psychological therapy for autobiographical memory retrieval with benefits for cognitive enhancement, stress reduction, etc. Previous studies demonstrated improved outcomes in treating various psychological conditions (affective disorders and PTSD). Technological advancements in VR, such as olfactory integration, can contribute to the realism and therapeutic potential of these environments. The integration of various physical stimuli with VR holds promising potential for psychological therapies and highlights the need for further interdisciplinary research. In this pilot study, we tested the efficacy of a new system for triggering autobiographical memory retrieval. For this, we used images combined with odors in a congruent manner and offering participants the chance to interact with the VR environment by using two virtual hands. We evaluated the efficacy of this system using qualitative methods, with emphasis on the evaluation of the emotions associated with memory recollection and the ease of triggering memories. All participants in our pilot study experienced intense emotions related to childhood or adolescence, and the pleasant feelings they had during the experiment persisted even after it ended. This is an advancement to what exists currently and provides original research elements for our paper.

The nasal route of administration can bypass the blood–brain barrier in order to obtain a higher concentration in the brain, thus offering a feasible alternative route of administration for diseases associated with the central nervous system. The advantages of the intranasal administration and the potential favorable therapeutic effects of intranasally administered insulin led to the formulation of carboxymethyl chitosan (CMC) and sodium hyaluronate (NaHA) hydrocolloidal systems with insulin for nasal administration, targeting nose-to-brain delivery and the initial assessment of these systems. The influence of the formulation variables on the response parameters defined as surface properties, rheology, and in vitro release of insulin were analyzed using experimental design and statistical programs (Modde and Minitab software). The systems recorded good wetting and adhesion capacity, allowing the spread of the hydrocolloidal systems on the nasal mucosa. The samples had a pseudoplastic flow and the rapid release of the insulin was according to our objective. According to the physico-chemical characterization and preliminary assessment, these formulations are appropriate for administration on the nasal mucosa, but further studies are necessary to demonstrate the beneficial therapeutic actions and the safety of using intranasal insulin.

The COVID-19 pandemic has significantly accelerated the adoption of telemedicine and digital health technologies, revealing their immense potential in managing cancer patients effectively. This article explores the impact of recent technological developments and widened consumer perspectives on personalised healthcare and patient awareness, particularly in oncology. Smartphones and wearable devices have become integral to daily life, promoting healthy lifestyles and supporting cancer patients through remote monitoring and health management. The widespread use of these devices presents an unprecedented opportunity to transform clinical trials and patient care by offering convenient and accessible means of collecting health data continuously and non-invasively. However, to fully harness their potential, it is crucial to establish standardised methods for measuring patient metrics to ensure data reliability and validity. This article also addresses the challenges of integrating these technologies into clinical practice, such as cost, patient and professional reluctance, and technological oversaturation. It emphasises the need for continuous innovation, the development of robust digital infrastructures, and the importance of fostering a supportive environment to integrate these advancements permanently. Ultimately, the convergence of technological innovation and personalised healthcare promises to enhance patient outcomes, improve quality of life, and revolutionise cancer management in the post-COVID era.

A series of M(x)CoCeMgAlO mixed oxides with different transition metals (M = Cu, Fe, Mn, and Ni) with an M content x = 3 at. %, and another series of Fe(x)CoCeMgAlO mixed oxides with Fe contents x ranging from 1 to 9 at. % with respect to cations, while keeping constant in both cases 40 at. % Co, 10 at. % Ce and Mg/Al atomic ratio of 3 were prepared via thermal decomposition at 750 °C in air of their corresponding layered double hydroxide (LDH) precursors obtained by coprecipitation. They were tested in a fixed bed reactor for complete methane oxidation with a gas feed of 1 vol.% methane in air to evaluate their catalytic performance. The physico-structural properties of the mixed oxide samples were investigated with several techniques, such as powder X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDX), elemental mappings, inductively coupled plasma optical emission spectroscopy (ICP-OES), X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction under hydrogen (H2-TPR) and nitrogen adsorption–desorption at −196 °C. XRD analysis revealed in all the samples the presence of Co3O4 crystallites together with periclase-like and CeO2 phases, with no separate M-based oxide phase. All the cations were distributed homogeneously, as suggested by EDX measurements and elemental mappings of the samples. The metal contents, determined by EDX and ICP-OES, were in accordance with the theoretical values set for the catalysts’ preparation. The redox properties studied by H2-TPR, along with the surface composition determined by XPS, provided information to elucidate the catalytic combustion properties of the studied mixed oxide materials. The methane combustion tests showed that all the M-promoted CoCeMgAlO mixed oxides were more active than the M-free counterpart, the highest promoting effect being observed for Fe as the doping transition metal. The Fe(x)CoCeMgAlO mixed oxide sample, with x = 3 at. % Fe displayed the highest catalytic activity for methane combustion with a temperature corresponding to 50% methane conversion, T50, of 489 °C, which is ca. 40 °C lower than that of the unpromoted catalyst. This was attributed to its superior redox properties and lowest activation energy among the studied catalysts, likely due to a Fe–Co–Ce synergistic interaction. In addition, long-term tests of Fe(3)CoCeMgAlO mixed oxide were performed, showing good stability over 60 h on-stream. On the other hand, the addition of water vapors in the feed led to textural and structural changes in the Fe(3)CoCeMgAlO system, affecting its catalytic performance in methane complete oxidation. At the same time, the catalyst showed relatively good recovery of its catalytic activity as soon as the water vapors were removed from the feed.

The present communication reports on the effect of the sprayed solution volume variation (as a thickness variation element) on the detailed Raman spectroscopy for WO3 thin films with different thicknesses grown from precursor solutions with two different concentrations. Walls-like structured monoclinic WO3 thin films were obtained by the spray deposition method for further integration in gas sensors. A detailed analysis of the two series of samples shows that the increase in thickness strongly affects the films’ morphology, while their crystalline structure is only slightly affected. The Raman analysis contributes to refining the structural feature clarifications. It was observed that, for 0.05 M precursor concentration series, thinner films (lower volume) show less intense peaks, indicating more defects and lower crystallinity, while thicker films (higher volume) exhibit sharper and more intense peaks, suggesting improved crystallinity and structural order. For higher precursor concentration 0.1 M series, films at higher precursor concentrations show overall more intense and sharper peaks across all thicknesses, indicating higher crystallinity and fewer defects. Differences in peak intensity and presence reflect variations in film morphology and structural properties due to increased precursor concentration. Further studies are ongoing.

In Europe, it is estimated that 14% of existing buildings were built before 1919, whereas 26% were built before 1945. In Romania, about 31% of the buildings date from before 1961, contributing to the current stock of old buildings with historic and architectural value in the country. This paper illustrates the current state of buildings with historic and architectural value in Romania, alongside a case study of a representative administrative building in Câmpulung, Romania. The analysis of the Town Hall building in Câmpulung, Romania, demonstrates that potential energy savings of up to 47.53% can be achieved by implementing interventions such as upgrading windows, insulating the attic, and installing photovoltaic panels. The highest energy reduction is obtained by replacing the window glass with a value of 18.16% with attic insulation with a value of 16.1%. This paper also presents indoor measurements of temperature and humidity in different offices positioned in the north and the south. The study conducted on the south façade office revealed consistent temperatures ranging from 21.7 °C to 24.4 °C, with an average of 23.31 °C. However, the humidity levels fluctuated considerably, ranging from 17.1% to 39.1%, with an average of 26.89%. The sun-exposed section of the building saw relatively stable temperature conditions, but the varying humidity levels could have a detrimental impact on the quality of the indoor atmosphere and potentially decrease the effectiveness of the workforce. By contrast, the north façade office exhibited lower and more fluctuating temperatures, ranging from 19.8 °C to 23.6 °C, with an average of 21.74 °C. Additionally, it had higher and more stable humidity levels, ranging between 19.5% and 41.7%, with an average of 29.83%. A thermographic analysis was performed on the north façade of the Câmpulung Town Hall, utilizing thermal imaging technology to detect areas of heat loss, and thus identifying the energy inefficiency problems of the building’s exterior. The investigation found notable variations in temperature, especially around the windows, where temperatures could be as high as 14.1 °C, highlighting the insufficiency of the building’s antiquated timber-framed windows in preventing energy loss.

Swiss stone pine (Pinus cembra) is a feasible solution for increasing the resistance of future mixed spruce–pine stands to windfall at the upper altitudinal limit of Romanian forests. This study aims to analyze the adaptability of ten full-sib families in two different environmental conditions and their evolution in time for predicting forward selection. At a seedling age of 33, evaluations were carried out for survival rate (Sr), growth (diameter at breast height—Dbh, and trees’ height), and branch traits, as well as for stem straightness. The high level of genetic variability, inheritance rate, and trait–trait correlations, registered in both trials, ensure the success of the breeding program. The Swiss stone pine shows a very good adaptation on high-sloping lands from the upper altitudinal limit of Romania’s forests, with the cross-pollinated (CP) families registering a 28.5% better survival in the Rodna trial (34° slope) compared to the Păltiniș experiment (7° slope). The consanguineous families registered only an 11% Sr in Păltiniș, while in the Rodna trial, the Sr was four times higher (in both trials, consanguineous trees were dominated). The juvenile–adult correlations of growth traits were significant, indicating that early selection could be efficient. The forward selection of the best 10% of CP families for Dbh could be applied, ensuring a 9% to 15% genetic gain.

Xerosis cutis represents one of the most common dermatological diagnoses, which, when untreated, can be the trigger for open wounds, infections, and other skin diseases. Plant extracts are a valuable option for long-term treatments for xerosis due to their phytocompounds, especially polyphenols, flavonoids, triterpenes, and polysaccharides, with antioxidant, anti-inflammatory, antimicrobial, moisturizing, and reparatory effects. Active substances have different mechanisms; therefore, evaluating the effects on the cells can be a key indicator, providing valuable information in terms of both cytotoxicity and efficacy. The in vitro and in vivo toxicity tests performed for Betulae extractum, Liquiritiae extractum, and Avenae extractum highlighted potential toxic effects at higher concentrations in a dose-dependent relationship, but at lower levels they can be considered safe (12.5 µg/mL for birch and licorice extracts, 50 µg/mL for oat extract). Concerning the re-epithelialization process, the results revealed that all three dry extracts effectively stimulate skin cell migration, highlighting a potential anti-inflammatory effect by increasing the cell migration rate in conditions of induced inflammation associated with oxidative stress. Among the tested concentrations with a potential contribution to wound healing, the following standout: are birch bark extract 3 μg/mL, licorice root extract 7.5 µg/mL, and oat herb (harvested before flowering) extract 7.5 µg/mL.

Photodynamic therapy (PDT) is an emerging treatment modality that utilizes light-sensitive compounds, known as photosensitizers, to produce reactive oxygen species (ROS) that can selectively destroy malignant or diseased tissues upon light activation. This study investigates the incorporation of two porphyrin structures, 5-(4-hydroxy-3-methoxyphenyl)-10,15,20-tris-(4-acetoxy-3-methoxyphenyl) porphyrin (P2.2.) and 5,10,15,20-tetrakis-(4-acetoxy-3-methoxyphenyl) porphyrin (P2.1.), into hydroxypropyl cellulose (HPC) hydrogels for potential use in topical photodynamic therapy (PDT). The structural and compositional properties of the resulting hydrogels were characterized using advanced techniques such as Fourier-transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), thermogravimetric analysis (TGA), atomic force microscopy (AFM), UV-Visible (UV-Vis) spectroscopy, and fluorescence spectroscopy. FTIR spectra revealed a slight shift of the main characteristic absorption bands corresponding to the porphyrins and their interactions with the HPC matrix, indicating successful incorporation and potential hydrogen bonding. XRD patterns revealed the presence of crystalline domains within the HPC matrix, indicating partial crystallization of the porphyrins dispersed within the amorphous polymer structure. TGA results indicated enhanced thermal stability of the HPC–porphyrin gels compared to 10% HPC gel, with additional weight loss stages corresponding to the thermal degradation of the porphyrins. Rheological analysis showed that the gels exhibited pseudoplastic behavior and thixotropic properties, with minimal impact on the flow properties of HPC by P2.1., but notable changes in viscosity and shear stress with P2.2. incorporation, indicating structural modifications. AFM imaging revealed a homogeneous distribution of porphyrins, and UV-Vis and fluorescence spectroscopy confirmed the retention of their photophysical properties. Pharmacotechnical evaluations showed that the hydrogels possessed suitable mechanical properties, optimal pH, high swelling ratios, and excellent spreadability, making them ideal for topical application. These findings suggest that the porphyrin-incorporated HPC hydrogels have significant potential as effective therapeutic agents for topical applications.

Covalent cross-linked hydrogels based on chitosan and poly(maleic acid-alt-vinyl acetate) were prepared as spherical beads. The structural modifications of the beads during the preparation steps (dropping in liquid nitrogen and lyophilization, thermal treatment, washing with water, and treatment with NaOH) were monitored by FT-IR spectroscopy. The hydrogel beads have a porous inner structure, as shown by SEM microscopy; moreover, they are stable in acidic and basic pH due to the covalent crosslinking. The swelling degree is strongly influenced by the pH since the beads possess ionizable amine and carboxylic groups. The binding capacity for Cu2+ ions was examined in batch mode as a function of sorbent composition, pH, contact time, and the initial concentration of Cu2+. The kinetic data were well-fitted with the pseudo-second-order kinetic, while the sorption equilibrium data were better fitted with Langmuir and Sips isotherms. The maximum equilibrium sorption capacity was higher for the beads obtained with a 3:1 molar ratio between the maleic copolymer and chitosan (142.4 mg Cu2+ g−1), compared with the beads obtained using a 1:1 molar ratio (103.7 mg Cu2+ g−1). The beads show a high degree of reusability since no notable decrease in the sorption capacity was observed after five consecutive sorption/desorption cycles.

IgE-mediated wheat allergy can take on various forms, including childhood food allergy to wheat, wheat-dependent exercise-induced anaphylaxis in young adults, baker’s respiratory allergy/asthma in workers exposed to wheat flour inhalation, and contact urticaria that is caused by hydrolyzed wheat proteins in some cosmetics, and that is sometimes associated with a food allergy. Singleplex and multiplex immunoassays detect specific IgE antibodies to wheat allergenic molecular biomarkers such as omega-5 gliadin Tri a 19, lipid transfer protein Tri a 14, and alpha-amylase inhibitors. The fluorescence enzyme immunoassay with capsulated cellulose polymer solid-phase coupled allergens is a commonly used singleplex assay. Multiplex methods include the ELISA-based macroarray immunoassay using nano-bead technology and a microarray immunoassay on polymer-coated slides. Another promising diagnostic tool is the basophil activation test performed with omega-5 gliadin and other wheat protein types. Detailed comprehension of the structural and immunological features of the numerous wheat allergens significant in clinical settings is imperative for advancing diagnostic biomarkers for IgE-mediated wheat allergies.

This paper investigated the feasibility of using 3D printing processes, specifically material extrusion (MEX) and vat photopolymerization (DLP—Digital Light Processing), to produce customized wrist–hand orthoses. Design, printability, and usability aspects were addressed. It was found that minimizing printing time for orthoses with intricate shapes, ventilation pockets, and minimal thickness is difficult. The influence of build orientation and process parameters, such as infill density, pattern, layer thickness, and wall thickness, on printing time for ten parameter configurations of orthoses in both ready-to-use and flat thermoformed shapes was examined. The findings revealed that the optimized orientations suggested by Meshmixer and Cura (Auto-orient option) did not reliably yield reduced printing times for each analyzed orthoses. The shortest printing time was achieved with a horizontal orientation (for orthoses manufactured in their ready-to-use form, starting from 3D scanning upper limb data) at the expense of surface quality in contact with the hand. For tall and thin orthoses, 100% infill density is recommended to ensure mechanical stability and layer fill, with caution required when reducing the support volume. Flat and thermoformed orthoses had the shortest printing times and could be produced with lower infill densities without defects. For the same design, the shortest printing time for an orthosis 3D-printed in its ready-to-use form was 8 h and 24 min at 60% infill, while the same orthosis produced as flat took 4 h and 37 min for the MEX process and half of this time for DLP. Usability criteria, including perceived immobilization strength, aesthetics, comfort, and weight, were evaluated for seven orthoses. Two healthy users, with previous experience with traditional plaster splints, tested the orthoses and expressed satisfaction with the 3D-printed designs. While the Voronoi design of DLP orthoses was visually more appealing, it was perceived as less stiff compared to those produced by MEX.

Hyaluronic acid, in the form of a gel or viscoelastic colloidal solution, is currently used for the viscosupplementation of joints affected by osteoarthritis, but its effectiveness is under debate in relation to newer alternatives. Based on meta-analytical arguments, the present article reinforces the opinion that there are still no decisive arguments for its complete replacement but for its use adapted to the peculiarities of the disease manifestation and of the patients. A “broad” comparison is first made with almost all alternatives studied in the last decade, and then a meta-regression study is performed to compare and predict the effect size induced by viscosupplementation therapy and its main challenger of clinical interest, the platelet-rich plasma treatment. If they are computerized, the developed models can represent tools for clinicians in determining the appropriateness of the option or not for viscosupplementation in a manner adapted to the pain felt by the patients, to their age, or to other clinical circumstances. The models were generated using algorithms implemented in the R language and assembled in different R packages. All primary data and necessary R scripts are provided in accordance with the philosophy of reproducible research. Finally, we adhere in a documented way to the opinion that HA-based products, currently under circumspection, are still clinically useful.

Hydrogels based on biocompatible polysaccharides with biological activity that can slowly release an active principle at the wound site represent promising alternatives to traditional wound dressing materials. In this respect, new hydrogels based on curdlan derivative with 2-hydroxypropyl dimethyl octyl ammonium groups (QCurd) and native curdlan (Curd) were obtained at room temperature by covalent cross-linking using a diepoxy cross-linking agent. The chemical structure of the QCurd/Curd hydrogels was investigated by Fourier transform infrared spectroscopy (FTIR) spectroscopy. Scanning electron microscopy (SEM) revealed well-defined regulated pores with an average diameter between 50 and 75 μm, and hydrophobic micro-domains of about 5 μm on the pore walls. The high swelling rate (21–24 gwater/ghydrogel) and low elastic modulus values (7–14 kPa) make them ideal for medical applications as wound dressings. To evaluate the possible use of the curdlan-based hydrogels as active dressings, the loading capacity and release kinetics of diclofenac, taken as a model drug, were studied under simulated physiological skin conditions. Several mathematical models have been applied to evaluate drug transport processes and to calculate the diffusion coefficients. The prepared QCurd/Curd hydrogels were found to have good antibacterial properties, showing a bacteriostatic effect after 48 h against S. aureus, MRSA, E. coli, and P. aeruginosa. The retarded drug delivery and antimicrobial properties of the new hydrogels support our hypothesis that they are candidates for the manufacture of wound dressings.

The aim of the present study was to formulate new variants of synthetic and animal-source bone materials coated with different biopolymers, containing antibiotics (ampicillin and oxacillin) and alendronate drugs. Validation consists in establishing mixtures that do not present interactions between components. These materials should act as a drug delivery system alongside the bone base. Natural polymers such as chitosan, alginate, and kappa-carrageenan have been shown to be optimal materials for drug delivery due to their intrinsic biocompatibility. Binary, ternary, and quaternary mixtures between components are analyzed by FT-IR spectroscopy, UV-Vis analysis, thermogravimetry (TGA), and scanning electron microscopy (SEM). The analysis led to the validation of materials suitable for the controlled release of active substances, which have the greatest chance of increasing the speed of bone regeneration, as well as helping in the local administration of antibiotics, which currently must be administered in the form of oral formulations or an injection. According to the FTIR, thermogravimetry, UV-Vis, SEM, and cytotoxicity tests performed in this study, it can be said that it is quite easy to obtain materials that can be used in dental practice that facilitate bone reconstruction through local treatment. At the same time, it was found that both active substances can be incorporated into the material together with Alg and Chit, thus limiting the adverse effects and maximizing the local beneficial effects.

The modified release of active substances such as chlorzoxazone from matrix tablets, based on Kollidon®SR and chitosan, depends both on the drug solubility in the dissolution medium and on the matrix composition. The aim of this study is to obtain some new oral matrix tablet formulations, based on Kollidon®SR and chitosan, in order to optimize the low-dose oral bioavailability of chlorzoxazone, a non-steroidal anti-inflammatory drug of class II Biopharmaceutical Classification System. Nine types of chlorzoxazone matrix tablets were obtained using the direct compression method by varying the components ratio as 1:1, 1:2, and 1:3 chlorzoxazone/excipients, 20–40 w/w % Kollidon®SR, 3–7 w/w % chitosan while the auxiliary substances: Aerosil® 1 w/w %, magnesium stearate 0.5 w/w % and Avicel® up to 100 w/w % were kept in constant concentrations. Pharmaco-technical characterization of the tablets included the analysis of flowability and compressibility properties (flow time, friction coefficient, angle of repose, Hausner ratio, and Carr index), and pharmaco-chemical characteristics (such as mass and dose uniformity, thickness, diameter, mechanical strength, friability, softening degree, and in vitro release profiles). Based on the obtained results, only three matrix tablet formulations (F1b, F2b, and F3b, containing 30 w/w % KOL and 5 w/w % CHT, were selected and further tested. These formulations were studied in detail by Fourier-transform infrared spectrometry, X-ray diffraction, thermogravimetry, and differential scanning calorimetry. The three formulations were comparatively studied regarding the release kinetics of active substances using in vitro release testing. The results were analyzed by fitting into four representative mathematical models for the modified-release oral formulations. In vitro kinetic study revealed a complex mechanism of release occurring in two steps of drug release, the first step (0–2 h) and the second (2–36 h). Two factors were calculated to assess the release profile of chlorzoxazone: f1—the similarity factor, and f2—the factor difference. The results have shown that both Kollidon®SR and chitosan may be used as matrix-forming agents when combined with chlorzoxazone. The three formulations showed optima pharmaco-technical properties and in vitro kinetic behavior; therefore, they have tremendous potential to be used in oral pharmaceutical products for the controlled delivery of chlorzoxazone. In vitro dissolution tests revealed a faster drug release for the F2b sample.

Electrical contacts are important circuit components with diverse industrial applications, and their failure can lead to multiple unwanted effects. Hence, the behavior of electrical contacts is a widely studied topic in the scientific literature based on various approaches, tools, and techniques. The present study proposes a new approach to numerical modeling and simulation based on the Holm contact theory, aiming to study the dependence between the electric potential and the temperature within an electrical contact. Structured in five sections, the research was conducted using COMSOL Multiphysics software (version 5.3) and its solid-state mechanics, electric current, and heat transfer modules in order to highlight contact behavior from mechanical, electrical and thermal points of view: the von Mises stress, contact force, electric field amplitude, variation of the electrical potential along the current path, temperature gradient, and dependence of temperature along the contact elements edges were obtained by simulation, and are graphically represented. The results show that the temperature increase follows a parabolic curve, and that for values higher than 4 mV of voltage drop, the temperature of the contact increases to 79.25 degrees (and up to 123.81 degrees for 5 mV) over the ambient temperature, thus the integrity of insulation can be compromised. These values are close (10–12%) to the analytically calculated ones, and also in line with research assessed in the literature review.

Epicardial adipose tissue (EAT) is a unique fat depot located around the heart, intimately associated with the myocardium and coronary arteries. The secretion of bioactive molecules and their interaction with neighbouring cardiac tissues makes it an active organ with important implications in cardiovascular health and disease. In recent years, omics technologies have provided valuable insights into the molecular characteristics and functional relevance of EAT in patients with coronary atherosclerosis, myocardial infarction, atrial fibrillation and associated metabolic disorders. This review aims to summarize the current understanding of EAT biology through the lens of genomics, transcriptomics, proteomics and lipidomics approaches. We discuss key findings from omics studies on EAT, including gene expression profiles, metabolic activity, signalling pathways and regulatory network, in order to explore in depth the disease mechanisms, possible therapeutic strategies, and cardiovascular risk assessment. Further advances in this field and integrating data from multiple omics platforms hold promise for unlocking personalized cardiometabolic profiles with EAT as a possible biomarker and therapeutic target in cardiovascular disease.

Applications of the Drosophila melanogaster (D.m.) research model have an important means both for genetic investigations and for the study of metal toxicity, because D.m. has physiological mechanisms comparable to those in human organisms. In this research, the toxic effect of lead (Pb2+) and copper (Cu2+) on four D.m. genotypes—the wild genotype (Oregon-R, used as control) and three mutant genotypes (white, brown, and white-vestigial)—was compared. Five replicates were made to observe the development progress of monitorized genotypes exposed to five different concentrations 0, 0.50, 0.75, 1.00, and 2.00 mM of copper (CuSO4) and lead Pb(C2H3O2)2. Proliferation rates of larvae, pupae, and adults depend on genetic factors, metals used (copper or lead), and their concentrations. The white-vestigial mutant genotype showed the greatest sensitivity at IC50 concentration (inhibition of proliferation of more than 50% compared with the control sample) at doses of 1.00 mM for Cu2+ and 2.00 mM for Pb2+. In contrast, the control genotype (Oregon-R) showed only an inhibition IC50 concentration of 2.00 mM for Cu2+. The white-vestigial mutant genotype showed the greatest sensitivity at IC50 concentration (inhibition of proliferation of more than 50% compared with the control sample) at doses of 1.00 mM for Cu2+ and 2.00 mM for Pb2+. In contrast, the control genotype (Oregon-R) showed an inhibition at the IC50 concentration of 2.00 mM for Cu2+. The results conclude that (i) the dose influences the prolificacy rate in a directly proportional way, (ii) the comparative analyses between Cu2+ and Pb2+ revealed a more acute effect of Cu2+, and (iii) differentiated prolificacy values according to genotypes were recorded. Those reflect the importance of using D.m. as a research model in the comparative studies of the interactions between genetic factors and metal toxicity. Also, this study provides significant information on non-toxic maximum doses for organisms.

The pathogenesis of chronic wounds (CW) involves a multifaceted interplay of biochemical, immunological, hematological, and microbiological interactions. Biofilm development is a significant virulence trait which enhances microbial survival and pathogenicity and has various implications on the development and management of CW. Biofilms induce a prolonged suboptimal inflammation in the wound microenvironment, associated with delayed healing. The composition of wound fluid (WF) adds more complexity to the subject, with proven pro-inflammatory properties and an intricate crosstalk among cytokines, chemokines, microRNAs, proteases, growth factors, and ECM components. One approach to achieve information on the mechanisms of disease progression and therapeutic response is the use of multiple high-throughput ‘OMIC’ modalities (genomic, proteomic, lipidomic, metabolomic assays), facilitating the discovery of potential biomarkers for wound healing, which may represent a breakthrough in this field and a major help in addressing delayed wound healing. In this review article, we aim to summarize the current progress achieved in host–microbiome crosstalk in the spectrum of CW healing and highlight future innovative strategies to boost the host immune response against infections, focusing on the interaction between pathogens and their hosts (for instance, by harnessing microorganisms like probiotics), which may serve as the prospective advancement of vaccines and treatments against infections.

We report a joint high-pressure experimental and theoretical study of the structural, vibrational, and photoluminescent properties of pure and Eu3+-doped cubic Y2O3 nanoparticles with two very different average particle sizes. We compare the results of synchrotron X-ray diffraction, Raman scattering, and photoluminescence measurements in nanoparticles with ab initio density-functional simulations in bulk material with the aim to understand the influence of the average particle size on the properties of pure and doped Y2O3 nanoparticles under compression. We observe that the high-pressure phase behavior of Y2O3 nanoparticles depends on the average particle size, but in a different way to that previously reported. Nanoparticles with an average particle size of ~37 nm show the same pressure-induced phase transition sequence on upstroke and downstroke as the bulk sample; however, nanoparticles with an average particle size of ~6 nm undergo an irreversible pressure-induced amorphization above 16 GPa that is completed above 24 GPa. On downstroke, 6 nm nanoparticles likely consist of an amorphous phase.

Emulsion hydrogels are promising materials for encapsulating and stabilizing high amounts of hydrophobic essential oils in hydrophilic matrices. In this work, clove oil-loaded hydrogels (CS/OP-C) are synthesized by combining covalent and physical cross-linking approaches. First, clove oil (CO) was emulsified and stabilized in a chitosan (CS) solution, which was further hardened by Schiff base covalent cross-linking with oxidized pullulan (OP). Second, the hydrogels were subjected to freeze–thaw cycles and, as a result, the clove oil was stabilized in physically cross-linked polymeric walls. Moreover, due to cryogelation, the obtained hydrogels exhibited sponge-like porous interconnected morphology (160–250 µm). By varying the clove oil content in the starting emulsion and the degree of cross-linking, the hydrogels displayed a high water retention capacity (swelling ratios between 1300 and 2000%), excellent elastic properties with fast shape recovery (20 s) after 70% compression, and controlled in vitro clove oil release in simulated skin conditions for 360 h. Furthermore, the prepared clove oil-loaded hydrogels had a strong scavenging activity of 83% and antibacterial and antifungal properties, showing a bacteriostatic effect after 48 and 72 h against S. aureus and E. coli. Our results recommend the new clove oil-embedded emulsion hydrogels as promising future materials for application as wound dressings.

Whey and gelatin, natural polymers within the protein category, find widespread use in hydrogel formulations applied across the food, medical, and pharmaceutical industries. This study presents new characteristics of hydrogels based on whey, gelatin, and copper sulfate as a consequence of the additional steps in the preparation method, specifically refrigeration and freezing storage followed by lyophilization. The water state in hydrogels prior to lyophilization impacts the morphological appearance, with refrigerated hydrogels exhibiting a more regular and dense pore distribution, as shown by the Scanning Electron Microscopy (SEM) images. This observation aligns with the higher mobility of polymer chains indicated by T2 distributions in 1H nuclear magnetic resonance (RMN) relaxometry measurements. Changes in the intensity and amide-specific wavenumbers of the FTIR spectra of whey and gelatin proteins are evident in the Fourier Transformed Infrared (FTIR) spectra of crosslinked and frozen hydrogels before lyophilization. Moreover, the reinforcing effect in the hydrogel matrix, noted in mechanical tests, is attributed to increased polymer chain content and copper sulfate crosslinking.

Anthracyclines, including epirubicin (Epi), are effective chemotherapeutics but are known for their cardiotoxic side effects, primarily inducing cardiomyocyte apoptosis. This study investigates the protective role of hesperetin (HSP) against cardiomyopathy triggered by Epi in a murine model. Male CD1 mice were divided into four groups, with the Epi group receiving a cumulative dose of 12 mg/kg intraperitoneally, reflecting a clinically relevant dosage. The co-treatment group received 100 mg/kg of HSP daily for 13 days. After the treatment period, mice were euthanized, and heart tissues were collected for histopathological, immunofluorescence/immunohistochemistry, and transmission electron microscopy (TEM) analyses. Histologically, Epi treatment led to cytoplasmic vacuolization, myofibril loss, and fiber disarray, while co-treatment with HSP preserved cardiac structure. Immunofluorescent analysis of Bcl-2 family proteins revealed Epi-induced upregulation of the pro-apoptotic protein Bax and a decrease in anti-apoptotic Bcl-2, which HSP treatment reversed. TEM observations confirmed the preservation of mitochondrial ultrastructure with HSP treatment. Moreover, in situ detection of DNA fragmentation highlighted a decrease in apoptotic nuclei with HSP treatment. In conclusion, HSP demonstrates a protective effect against Epi-induced cardiac injury and apoptosis, suggesting its potential as an adjunctive therapy in anthracycline-induced cardiomyopathy. Further studies, including chronic cardiotoxicity models and clinical trials, are warranted to optimize its therapeutic application in Epi-related cardiac dysfunction.

Circulating cell-free DNA (ccfDNA) quantity correlates with the clinical characteristics and prognosis of various cancer types. We investigated whether ccfDNA levels and the neutrophil-to-lymphocyte ratio (NLR) have prognostic value in patients with pancreatic ductal adenocarcinoma (PDAC). Peripheral blood was collected from 82 patients with PDAC prior to any diagnostic procedure or the administration of chemotherapy. Plasma DNA was isolated, and ccfDNA concentration and NLR were determined. We found that ccfDNA levels were correlated with age and tumor burden. Moreover, higher values of NLR (≥3.31) were linked with worse overall survival (OS) (4 vs. 10 months; log rank p = 0.011), and an elevated ccfDNA concentration (≥25.79 ng/mL) was strongly associated with shorter OS (4 vs. 8 months; log rank p = 0.009). According to the results of the multivariable Cox regression analysis, the baseline concentration of ccfDNA was an independent prognostic factor for OS (HR 0.45, 95% CI 0.21–0.97, p = 0.041). Furthermore, the combination of ccfDNA levels with NLR greatly enhanced the prognostic accuracy of PDAC patients. Our study demonstrates that ccfDNA concentration and NLR are independent predictors of survival in PDAC. Subsequent studies should validate this combination as a prognostic indicator in PDAC patients and assess its utility for guiding therapeutic decisions.

The link between the mind and cardiac disease has been studied throughout the ages. Patients diagnosed with ischemic heart disease may develop psychological and psychiatric symptoms such as depressed mood, anxiety, and insomnia that can drastically affect life quality. Unfortunately, during cardiac rehabilitation, there is a lack of psychiatric care. To improve a patient’s quality of life, this intriguing relationship between ischemic heart disease and depression must be closely monitored, because risk factors and pathophysiological mechanisms may be common. This case report article is about a 47-year-old Romanian woman with acute coronary syndrome revascularized with angioplasty and stent implantation 3 months ago, admitted to the Arad Emergency County Clinical Hospital, Psychiatric Department, with depressive symptoms. Our patient was treated with an antidepressant, an anxiolytic, a mood stabilizer, a hypnotic, a nootropic, aspirin, dual platelet inhibition, a beta-blocker, a converting enzyme inhibitor, a statin, and oral antidiabetics medication, as well as having psychotherapy sessions. The treatment was well tolerated, with an improvement in the social and professional functionality of the patient. In conclusion, people with ischemic heart disease have a higher risk of developing depression, but patients with depression also have a higher risk of developing ischemic heart disease. This confirms the importance of an individualized multidisciplinary approach to management because the collaboration between psychiatrists and cardiologists can be an additional benefit to patients. This article may pave the way for further research into the association between ischemic heart disease and depressive disorders, which could provide significant advantages to patients. Interdisciplinarity contributes to the development of innovative techniques of prevention and treatment, reducing worldwide morbidity and mortality.

Our study highlighted the immune changes by pro-inflammatory biomarkers in the gut–liver-axis-linked ROS-cell death mechanisms in chronic and acute inflammations when gut cells are exposed to endotoxins in patients with hepatic cirrhosis or steatosis. In duodenal tissue samples, gut immune barrier dysfunction was analyzed by pro-inflammatory biomarker expressions, oxidative stress, and cell death by flow cytometry methods. A significant innate and adaptative immune system reaction was observed as result of persistent endotoxin action in gut cells in chronic inflammation tissue samples recovered from hepatic cirrhosis with the A-B child stage. Instead, in patients with C child stage of HC, the endotoxin tolerance was installed in cells, characterized by T lymphocyte silent activation and increased Th1 cytokines expression. Interesting mechanisms of ROS-cell death were observed in chronic and acute inflammation samples when gut cells were exposed to endotoxins and immune changes in the gut–liver axis. Late apoptosis represents the chronic response to injury induction by the gut immune barrier dysfunction, oxidative stress, and liver-dysregulated barrier. Meanwhile, necrosis represents an acute and severe reply to endotoxin action on gut cells when the immune system reacts to pro-inflammatory Th1 and Th2 cytokines releasing, offering protection against PAMPs/DAMPs by monocytes and T lymphocyte activation. Flow cytometric analysis of pro-inflammatory biomarkers linked to oxidative stress-cell death mechanisms shown in our study recommends laboratory techniques in diagnostic fields.

Nicotinamide mononucleotide (NMN) has emerged as a promising therapeutic intervention for age-related disorders, including type 2 diabetes. In this study, we confirmed the previously observed effects of NMN treatment on glucose uptake and investigated its underlying mechanisms in various tissues and cell lines. Through the most comprehensive proteomic analysis to date, we discovered a series of novel organ-specific effects responsible for glucose uptake as measured by the IPGTT: adipose tissue growing (suggested by increased protein synthesis and degradation and mTOR proliferation signaling upregulation). Notably, we observed the upregulation of thermogenic UCP1, promoting enhanced glucose conversion to heat in intermuscular adipose tissue while showing a surprising repressive effect on mitochondrial biogenesis in muscle and the brain. Additionally, liver and muscle cells displayed a unique response, characterized by spliceosome downregulation and concurrent upregulation of chaperones, proteasomes, and ribosomes, leading to mildly impaired and energy-inefficient protein synthesis machinery. Furthermore, our findings revealed remarkable metabolic rewiring in the brain. This involved increased production of ketone bodies, downregulation of mitochondrial OXPHOS and TCA cycle components, as well as the induction of well-known fasting-associated effects. Collectively, our data elucidate the multifaceted nature of NMN action, highlighting its organ-specific effects and their role in improving glucose uptake. These findings deepen our understanding of NMN’s therapeutic potential and pave the way for novel strategies in managing metabolic disorders.

Research indicates compelling evidence of SARS-CoV-2 vertical transmission as a result of placental pathology. This study offers an approach to histopathological and immunohistochemical placental observations from SARS-CoV-2-positive mothers compared to negative ones. Out of the 44 examined placentas, 24 were collected from patients with a SARS-CoV-2 infection during pregnancy and 20 were collected from patients without infection. The disease group showed strong SARS-CoV-2 positivity of the membranes, trophoblasts, and fetal villous macrophages. Most infections occurred during the third trimester of pregnancy (66.6%). Pathology revealed areas consistent with avascular villi (AV) and thrombi in the chorionic vessels and umbilical cord in the positive group, suggesting fetal vascular malperfusion (FVM). This study shows SARS-CoV-2 has an impact on coagulation, demonstrated by fetal thrombotic vasculopathy (p = 0.01) and fibrin deposition (p = 0.01). Other observed features included infarction (17%), perivillous fibrin deposition (29%), intervillous fibrin (25%), delayed placental maturation (8.3%), chorangiosis (13%), chorioamnionitis (8.3%), and meconium (21%). The negative control group revealed only one case of placental infarction (5%), intervillous fibrin (5%), delayed placental maturation (5%), and chorioamnionitis (5%) and two cases of meconium (19%). Our study sheds light on the changes and differences that occurred in placentas from SARS-CoV-2-infected mothers and the control group. Further research is necessary to definitively establish whether SARS-CoV-2 is the primary culprit behind these intricate complications.

Climate conditions clearly influence the concentration of important substances in grapes, generating chemical reactions that will determine the final wine aromas. Three different regions were chosen to cover the most important viticultural areas from Romania. The aim of this study was to highlight, for the first time, the volatile profile for two Romanian white wines, Feteasca regala and Feteasca alba, from three different vineyards (Silagiu, Aiud, and Sarica Niculițel). The results showed that wine’s aromatic profile was directly proportional with the area of origin for the grapes, directly correlated to the climate. The obtained values for alcohols, esters, aldehydes, and terpenoid compounds were also related to the oenoclimatic aptitude index, a significant accumulation of aroma compounds being observed mainly for the Feteasca regala wine. A total of 17 superior alcohols were evidenced within the two types of wines, among them, 2-phenyl ethanol being distinguished by its higher level in all samples, varying from 7692 up to 11,783 µg/L. Together with some aromatic esters, it offers one of the most pleasant aromas, resembling rose flavour. Of all the acids found in wines, the succinic acid has the most intense flavour, tasting somehow bitter and salty, imprinting to wine a certain “juiciness” and “vinosity”. Diethyl succinate was one of the main esters in all six samples, with concentrations from 777 up to 1200 µg/L. Also, two terpenoid compounds and two aldehydes were found in all samples. The data obtained from PCA evaluation suggested that there is a significant variance among wine varieties. Nevertheless, hierarchical clustering was applied to explain the relationship between the six samples of wines, the smallest clusters that included Silagiu and Aiud winegrowing regions suggesting an increased similarity of the compositional profile.

Anthropogenic activities related to mining generate both progress and a vast amount of waste that is responsible for environmental degradation. The Jiu Valley is one of the areas of Romania where mining has affected large areas of land, used to build mines and tailings ponds. The former Coroiesti coal processing plant (CCPP) is such a location with a total area of 25 ha containing approximately 5.5 million tons of tailings. The assessment of the stability of tailings dams is extremely important from safety and environmental aspects. This study proposes a solution based on numerical methods for determining the stability of a section of the dam of a tailings pond. The model of tailings pond no. 1, compartment B, from the Coroieşti Coal Preparation was built using COMSOL Multiphysics. Two scenarios of stability analysis were conducted on a section of the tailings dam: the FOS was determined using the shear strength reduction (SSR) method for both the initial and the current state of this TP. This method is a modern alternative to the limit equilibrium method, and its implementation by COMSOL is new to our country, thus aligning this methodology with current worldwide trends and developments in the field. The results obtained proved to be in line with those calculated in the past with traditional analytical methods, proving that the safety criteria of the studied TP/TD are being met.

The importance of spinal reflexes is connected to the rehabilitation processes in neural prostheses and to the neuromuscular junction. In order to model neuron networks as electronic circuits, a simulation environment like LTSpice XVII or PSpice can be used to create a complete electronic description. There are four types of neurons employed in spinal reflexes: α-motoneurons, sensitive neurons, excitatory interneurons, and inhibitory interneurons. Many proposals have been made regarding methods that can be used for assimilating neurons using electronic circuits. In this paper, only a single internal model of a neuron is considered enough to simulate all four types of neurons implicated in the control loops. The main contribution of this paper is to propose the modeling of neurons using some electronic circuits designed either with a bipolar transistor or with CMOS transistors for the input and output of circuits stages. In this way, it is possible to mimic the neural pulses’ circulation along the loops of the spinal reflexes and to prove the accuracy of the simulation results with respect to the biological signals collected from the bibliographic materials.

Unlike other coronaviruses, severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) has rapidly infected the global population, with some suffering long-term effects. Thanks to extensive data on SARS-CoV-2 made available through global, multi-level collaborative research, investigators are getting closer to understanding the mechanisms of SARS-CoV-2 infection. Here, using publicly available total and small RNAseq data of Calu3 cell lines, we conducted a comparative analysis of the changes in tRNA fragments (tRFs; regulatory small noncoding RNAs) in the context of severe acute respiratory syndrome coronavirus (SARS-CoV) and SARS-CoV-2 infections. We found extensive upregulation of multiple tRFs in SARS-CoV-2 infection that was not present in SARS-CoV or other virus infections our group has studied. By comparing the total RNA changes in matching samples, we identified significant downregulation of TRDMT1 (tRNA methyltransferase), only in SARS-CoV-2 infection, a potential upstream event. We further found enriched neural functions among downregulated genes with SARS-CoV-2 infection. Interestingly, theoretically predicted targets of the upregulated tRFs without considering mRNA expression data are also enriched in neural functions such as axon guidance. Based on a combination of expression data and theoretical calculations, we propose potential targets for tRFs. For example, among the mRNAs downregulated with SARS-CoV-2 infection (but not with SARS-CoV infection), SEMA3C is a theoretically calculated target of multiple upregulated tRFs and a ligand of NRP1, a SARS-CoV-2 receptor. Our analysis suggests that tRFs contribute to distinct neurological features seen in SARS-CoV-2.

In a context where there is an increasing need for thermal treatments of wooden products, the current research contributes a description of the torrefaction treatment of two of the composite wood materials available on the international market. The present paper presents the importance of the torrefaction process for poplar plywood and medium-density fiberboard. In this paper, the positive aspects of the torrefaction process (decrease in water absorption, thickness swelling and shrinkage, and color) but also the negative aspects of mechanical resistance to static bending are presented. Poplar plywood (PW) and medium-density fiberboard (MDF) panels, with the initial dimensions of 2000 × 1250 mm, were used. From these, 300 × 300 mm samples were cut and torrefied using two different temperatures (170 and 190 °C) and two different periods (for 1 and 2 h). After the treatment, the samples were cut in different sizes (as necessary for each type of evaluation method) from different zones of the panels and used to evaluate the water absorption and thickness swelling, to determine their modulus of rupture, roughness, and color changes. The obtained results emphasize that the mass loses increase at high temperature as the main disadvantageous characteristics of torrefaction. Also, while the calorific power increases with the increase in the parameters of the torrefaction regime, the hygroscopicity and some mechanical properties of the material simultaneously decrease.

Most dental implants used in dental practices are made of titanium or titanium alloys so that the essential differences promoted by the various manufacturers are at the level of their surface; through specific surface treatments, the aim is to obtain improved results regarding osseointegration. This study attempts to identify the differences between a series of used brands of dental implants by analyzing the chemical composition and the morphology of their surface and is particularly significant for the potential users as it highlights the manner of performances of the aforementioned implants, providing them with a tool in choosing the proper dental implant to suit their needs. It was found that, as the technology evolved and the costs were reduced, there is a net preference for using pure titanium or its alloys in the manufacture of dental implants versus the stainless steel titanium alloys, considered now a thing of the past.

Vascular disease was for a long time considered a disease of the old age, but it is becoming increasingly clear that a cumulus of factors can cause early vascular aging (EVA). Inflammation plays a key role in vascular stiffening and also in other pathologies that induce vascular damage. There is a known and confirmed connection between inflammation and atherosclerosis. However, it has taken a long time to prove the beneficial effects of anti-inflammatory drugs on cardiovascular events. Diabetes can be both a product of inflammation and a cofactor implicated in the progression of vascular disease. When diabetes and inflammation are accompanied by obesity, this ominous trifecta leads to an increased incidence of atherothrombotic events. Research into earlier stages of vascular disease, and documentation of vulnerability to premature vascular disease, might be the key to success in preventing clinical events. Modulation of inflammation, combined with strict control of classical cardiovascular risk factors, seems to be the winning recipe. Identification of population subsets with a successful vascular aging (supernormal vascular aging—SUPERNOVA) pattern could also bring forth novel therapeutic interventions.

Nowadays, the enhancement of the existing building stock energy performance is a priority. To promote building energy renovation, the European Committee asks Member States to define retrofit strategies, finding cost-effective solutions. This research aims to investigate the relationship between the initial characteristics of an existing residential buildings and different types of retrofit solutions in terms of final/primary energy consumption and CO2 emissions. A multi-objective optimization has been carried out using experimental data in DesignBuilder dynamic simulation tool.

The development of intelligent materials for protective equipment applications is still growing, with enormous potential to improve the safety of personnel functioning in specialized professions, such as firefighters. The design and production of such materials by the chemical modification of biodegradable semisynthetic polymers, accompanied by modern manufacturing techniques such as electrospinning, which may increase specific properties of the targeted material, continue to attract the interest of researchers. Phosphorus-modified poly(vinyl alcohol)s have been, thus, synthesized and utilized to prepare environmentally friendly electrospun mats. Poly(vinyl alcohol)s of three different molecular weights and degrees of hydrolysis were phosphorylated by polycondensation reaction in solution in the presence of phenyl dichlorophosphate in order to enhance their flame resistance and thermal stability. The thermal behavior and the flame resistance of the resulting phosphorus-modified poly(vinyl alcohol) products were investigated by thermogravimetric analysis and by cone calorimetry at a micro scale. Based on the as-synthesized phosphorus-modified poly(vinyl alcohol)s, electrospun mats were successfully fabricated by the electrospinning process. Rheology studies were performed to establish the optimal conditions of the electrospinning process, and scanning electron microscopy investigations were undertaken to observe the morphology of the phosphorus-modified poly(vinyl alcohol) electrospun mats.

Fourier-transform infrared (FTIR) spectroscopy has been extensively used in plastic pollution research, since it has the advantages of great simplicity, rapidity, and low cost, being widely employed in the fingerprint identification of molecular composition and structure. The present study evaluates attenuated total reflection (ATR)–FTIR spectroscopy as a sensitive and effective assay for the identification of deoxyribonucleic acid (DNA) isolated from experimental animals. Various composite materials based on recycled polyethylene terephthalate (PET) as the main component, along with high-density polyethylene (HDPE), polypropylene (PP), and aluminum nanopowder obtained using an injection-molding machine, were used as substrate contaminants. The contamination was performed using quantified nucleic acid solution added in droplets to the clean, decontaminated samples, which were then dried and kept in a protective environment until the analysis. ATR–FTIR (with an FTIR spectrometer equipped with an ATR accessory) spectroscopy was used to analyze the bare composite materials’ substrates and the DNA-contaminated samples. To the best of our knowledge, the evaluation of PET packaging contamination with DNA species by FTIR has not been reported previously. This study demonstrated that FTIR spectroscopy could provide a rapid, sensitive, and reliable approach for screening of biochemical contaminants on composite materials based on recycled PET.

Gastric cancer has remained in the top five cancers for over ten years, both in terms of incidence and mortality due to the shortage of biomarkers for disease follow-up and effective therapies. Aiming to fill this gap, we performed a bioinformatics assessment on our data and two additional GEO microarray profiles, followed by a deep analysis of the 40 differentially expressed genes identified. PPI network analysis and MCODE plug-in pointed out nine upregulated hub genes coding for proteins from the collagen family (COL12A1, COL5A2, and COL10A1) or involved in the assembly (BGN) or degradation of collagens (CTHRC1), and also associated with cell adhesion (THBS2 and SPP1) and extracellular matrix degradation (FAP, SULF1). Those genes were highly upregulated at the mRNA and protein level, the increase being correlated with pathological T stages. The high expression of BGN (p = 8 × 10−12), THBS2 (p = 1.2 × 10−6), CTHRC1 (p = 1.1 × 10−4), SULF1 (p = 3.8 × 10−4), COL5A1 (p = 1.3 × 10−4), COL10A1 (p = 5.7 × 10−4), COL12A1 (p = 2 × 10−3) correlated with poor overall survival and an immune infiltrate based especially on immunosuppressive M2 macrophages (p-value range 4.82 × 10−7–1.63 × 10−13). Our results emphasize that these genes could be candidate biomarkers for GC progression and prognosis and new therapeutic targets.

The fabrication of complex, reproducible, and accurate micro-and nanostructured interfaces that impede the interaction between material’s surface and different cell types represents an important objective in the development of medical devices. This can be achieved by topographical means such as dual-scale structures, mainly represented by microstructures with surface nanopatterning. Fabrication via laser irradiation of materials seems promising. However, laser-assisted fabrication of dual-scale structures, i.e., ripples relies on stochastic processes deriving from laser–matter interaction, limiting the control over the structures’ topography. In this paper, we report on laser fabrication of cell-repellent dual-scale 3D structures with fully reproducible and high spatial accuracy topographies. Structures were designed as micrometric “mushrooms” decorated with fingerprint-like nanometric features with heights and periodicities close to those of the calamistrum, i.e., 200–300 nm. They were fabricated by Laser Direct Writing via Two-Photon Polymerization of IP-Dip photoresist. Design and laser writing parameters were optimized for conferring cell-repellent properties to the structures, even for high cellular densities in the culture medium. The structures were most efficient in repelling the cells when the fingerprint-like features had periodicities and heights of ≅200 nm, fairly close to the repellent surfaces of the calamistrum. Laser power was the most important parameter for the optimization protocol.

Glioma is the most common primary intracranial tumor and has the greatest prevalence of all brain tumors. Treatment resistance and tumor recurrence in GBM are mostly explained by considerable alterations within the tumor microenvironment, as well as extraordinary cellular and molecular heterogeneity. Soluble factors, extracellular matrix components, tissue-resident cell types, resident or newly recruited immune cells together make up the GBM microenvironment. Regardless of many immune cells, a profound state of tumor immunosuppression is supported and developed, posing a considerable hurdle to cancer cells’ immune-mediated destruction. Several studies have suggested that various GBM subtypes present different modifications in their microenvironment, although the importance of the microenvironment in treatment response has yet to be determined. Understanding the microenvironment and how it changes after therapies is critical because it can influence the remaining invasive GSCs and lead to recurrence. This review article sheds light on the various components of the GBM microenvironment and their roles in tumoral development, as well as immune-related biological processes that support the interconnection/interrelationship between different cell types. Also, we summarize the current understanding of the modulation of soluble factors and highlight the dysregulated inflammatory chemokine/specific receptors cascades/networks and their significance in tumorigenesis, cancer-related inflammation, and metastasis.

This study presents two analytical models for the laser powder bed fusion (LPBF) process. To begin, the single layer’s dimensions were measured using principal operating conditions, including laser power, laser scanning speed, powder layer thickness, and hatch distance. The single-layer printing dimensions were transformed into multi-layer printing using the hatch distance. The thermal history of the printed layers was used as an input to the Johnson–Mehl–Avrami-Kolmogorov model to estimate the average dendrite grain size. LPBF experiments were conducted for a Cobalt–chromium (Co–Cr) alloy to validate the developed model. The average dendrite grain size was estimated using a scanning electron microscope (SEM) combined with “Image J” software. The Vickers hardness test was performed to correlate the average dendrite grain size and operating conditions. A 10–15% mean absolute deviation was presented between experiments and simulation results. In all samples, a Co-based γ-FCC structure was identified. An inverse correlation was established between the laser power and smaller average dendrite grain, while a direct relationship has been determined between laser scanning speed and average dendrite grain size. A similar trend was identified between hatch distance and average dendrite grain size. A direct link has been determined between the average dendrite grain size and hardness value. Furthermore, a direct relationship has connected the laser volume energy density and hardness value. This study will help experimentalists to design operating conditions based on the required grain size and corresponding mechanical characteristics.

Glioblastoma (GBM) is one of the most aggressive tumors of the central nervous system, characterized by a wide range of inter- and intratumor heterogeneity. Accumulation of fatty acids (FA) metabolites was associated with a low survival rate in high-grade glioma patients. The diversity of brain lipids, especially polyunsaturated fatty acids (PUFAs), is greater than in all other organs and several classes of proteins, such as FA transport proteins (FATPs), and FA translocases are considered principal candidates for PUFAs transport through BBB and delivery of PUFAs to brain cells. Among these, the CD36 FA translocase promotes long-chain FA uptake as well as oxidated lipoproteins. Moreover, CD36 binds and recognizes thrombospondin-1 (TSP-1), an extracellular matrix protein that was shown to play a multifaceted role in cancer as part of the tumor microenvironment. Effects on tumor cells are mediated by TSP-1 through the interaction with CD36 as well as CD47, a member of the immunoglobulin superfamily. TSP-1/CD47 interactions have an important role in the modulation of glioma cell invasion and angiogenesis in GBM. Separately, FA, the two membrane receptors CD36, CD47, and their joint ligand TSP-1 all play a part in GBM pathogenesis. The last research has put in light their interconnection/interrelationship in order to exert a cumulative effect in the modulation of the GBM molecular network.

Osteonecrosis of the jaws (ONJ) usually has a clear etiology. Local infection or trauma, radiotherapy and drugs that disrupt the vascular supply or bone turnover in the jaws are its major contributors. The thrombotic occlusion of the bone’s venous outflow that occurs in individuals with hereditary thrombophilia and/or hypofibrinolysis has a less known impact on jaw health and healing capability. Our research provides the most comprehensive, up-to-date and systematized information on the prevalence and significance of hereditary thrombophilia and/or hypofibrinolysis states in ONJ. We found that hereditary prothrombotic abnormalities are common in patients with ONJ refractory to conventional medical and dental treatments. Thrombophilia traits usually coexist with hypofibrinolysis traits. We also found that frequently acquired prothrombotic abnormalities coexist with hereditary ones and enhance their negative effect on the bone. Therefore, we recommend a personalized therapeutic approach that addresses, in particular, the modifiable risk factors of ONJ. Patients will have clear benefits, as they will be relieved of persistent pain and repeated dental procedures.

BACKGROUND: Cerebral circulation delivers the blood flow to the brain through a dedicated network of sanguine vessels. A healthy human brain can regulate cerebral blood flow (CBF) according to any physiological or pathological challenges. The brain is protected by its self-regulatory mechanisms, which are dependent on neuronal and support cellular populations, including endothelial ones, as well as metabolic, and even myogenic factors. OBJECTIVES: Accumulating data suggest that “non-pharmacological” approaches might provide new opportunities for stroke therapy, such as electro-/acupuncture, hyperbaric oxygen therapy, hypothermia/cooling, photobiomodulation, therapeutic gases, transcranial direct current stimulations, or transcranial magnetic stimulations. We reviewed the recent data on the mechanisms and clinical implications of these non-pharmaceutical treatments. METHODS: To present the state-of-the-art for currently available non-invasive, non-pharmacological-related interventions in acute ischemic stroke, we accomplished this synthetic and systematic literature review based on the Preferred Reporting Items for Systematic Principles Reviews and Meta-Analyses (PRISMA). RESULTS: The initial number of obtained articles was 313. After fulfilling the five steps in the filtering/selection methodology, 54 fully eligible papers were selected for synthetic review. We enhanced our documentation with other bibliographic resources connected to our subject, identified in the literature within a non-standardized search, to fill the knowledge gaps. Fifteen clinical trials were also identified. DISCUSSION: Non-invasive, non-pharmacological therapeutic/rehabilitative interventions for acute ischemic stroke are mainly holistic therapies. Therefore, most of them are not yet routinely used in clinical practice, despite some possible beneficial effects, which have yet to be supplementarily proven in more related studies. Moreover, few of the identified clinical trials are already completed and most do not have final results. CONCLUSIONS: This review synthesizes the current findings on acute ischemic stroke therapeutic/rehabilitative interventions, described as non-invasive and non-pharmacological.

Background: Anesthetic preconditioning (AP) is known to mimic ischemic preconditioning. The purpose of this study was to investigate the effects of an interrupted sevoflurane administration protocol on myocardial ischemia/reperfusion (I/R) injury. Methods: Male Wistar rats (n = 60) were ventilated for 30 min with room air (control group, CG) or with a mixture of air and sevoflurane (1 minimum alveolar concentration—MAC) in 5-min cycles, alternating with 5-min wash-out periods (preconditioned groups). Cytokines implicated in the AP response were measured. An (I/R) lesion was produced immediately after the sham intervention (CG) and preconditioning protocol (early AP group, EAPG) or 24 h after the intervention (late AP group, LAPG). The area of fibrosis, the degree of apoptosis and the number of c-kit+ cells was estimated for each group. Results: Cytokine levels were increased post AP. The area of fibrosis decreased in both EAPG and LAPG compared to the CG (p < 0.0001). When compared to the CG, the degree of apoptosis was reduced in both LAPG (p = 0.006) and EAPG (p = 0.007) and the number of c-kit+ cells was the greatest for the LAPG (p < 0.0001). Conclusions: Sevoflurane preconditioning, using an interrupted anesthesia protocol, is efficient in myocardial protection and could be beneficial to reduce perioperative or periprocedural ischemia in patients with increased cardiovascular risk.

The development of materials offering electromagnetic interference (EMI) shielding is of significant consideration, since this can help in expanding the lifetime of devices, electromagnetic compatibility, as well as the protection of biological systems. Conductive paints used widely today in electromagnetic interference (EMI) shielding applications are often based on organic solvents that can create safety issues due to the subsequent environment problems. This paper concerned the development of eco-friendly conductive water-based paints for use in EMI-shielding applications. Graphene nanoplatelets, polyaniline emeraldine (PANI) doped with poly(styrene sulfonic acid) (PSS) or HCl or HBr and poly(3,4-ethylenedioxythiophene) poly(styrene sulfonic acid) (PEDOT:PSS) in various ratios were employed in a water base for developing the paints. The target was to develop homogeneous water-based paint-like fluid mixtures easily applied onto surfaces using a paint brush, leading in homogeneous, uniform, opaque layers, draying fast in air at room temperature, and having quite good electrical conductivity that can offer efficient EMI-shielding performance. The results of this parametric trial indicated the optimum compositions leading in paints with optimized properties that can result in uniform, homogeneous, and conductive layers up to a thickness of over 500 μm without deformation and cracking, offering attenuation of up to 60 dBs of incoming GHz electromagnetic radiation. In addition, the structural and morphological characteristics of these paints were studied in detail.