Search

Solar energy-powered adsorption-based atmospheric water harvesting (ABAWH) is an emerging technology for freshwater production, especially in water-scarce regions that are remote and landlocked. Numerous water adsorbents have been used in ABAWH devices to convert molecule to liquid water. However, it is still challenging to harvest water from the air in cold winter, owing to the water adsorption of sorbents decreasing significantly at low temperature. Herein, we designed and fabricated an ABAWH device by integrating composited ionic liquids (CILs) with carbon nanotubes (CNTs) photothermal materials on the surface of cotton rod fibers. CILs extract water from the air. CNTs enable light-to-heat conversion and drive the solar evaporation process. Importantly, the cotton rods offer a backbone porous structure to maintain its internal temperature at 20 °C under solar irradiation, and thus promote the water adsorption performance of CILs at low environmental temperature. Freshwater is successfully harvested under environment temperature of 6 °C, 30% RH and solar irradiation intensity of 0.6 kW m−2. The water yield can achieve 1.49 kg per m2 per day in an outdoor environment. We believe that the ABAWH device offers a promising approach to effectively harvest water from the air at low temperature and humidity conditions.

An inorganic caesium cation was incorporated into perovskite to improve the performance and stability of solar cells with a hole-transport-material free structure in ambient air. A triple cation device with a champion power conversion efficiency of over 15% was achieved, exhibiting superior thermal, long-term and operational stabilities.

Metallic Li, with ultrahigh theoretical capacity (3860 mA h g−1) and the lowest electrochemical potential (−3.04 V vs. the standard hydrogen electrode), is perfectly meet the needs of high energy density lithium batteries. However, the direct use of metallic lithium as anode would cause serious dendrite and huge volume expansion, which will bring safety hazards and restrict the practical commercialization of Li metal anodes. Herein, a facile electrophoretic deposition (EPD) method was employed for the first time to fabricate uniform TiN modified commercial Cu foam (TiN@Cu foam) as the lithiophilic 3D conductive skeleton. The lithiophilic TiN acts as the well-distributed seeds to promote the uniform lithium deposition, attributing to the lowed nucleation overpotential. The porous and conductive Cu foams can further mitigate the formation of Li dendrites, on account of its high specific surface area reduce the effective current density. The TiN@Cu foam based half cells and symmetric cells both exhibit improved reversibility and reduced polarization voltage in lithium plating/stripping process. Furthermore, better rate performance and cycling stability were also achieved in the full-cell configurations of TiN@Cu foam-Li/Li4Ti5O12 (LTO) and TiN@Cu foam-Li/LiFePO4 (LFP). This work demonstrates a facile strategy to modify the commercial current collectors with pre-synthesized lithiophilic nanoparticles for achieving uniform Li deposition.

An optimized two-step sequential deposition method to fabricate hole-transport-layer-free carbon-based methyl ammonium lead bromide (MAPbBr3) perovskite solar cells is reported. Small amounts of MABr are introduced into the PbBr2 precursor solution during the first step to prepare MAPbBr3 perovskite films (labeled as MAPB-xMABr), which promotes the conversion of PbBr2 into perovskite phase and results in denser perovskite films with increased crystallinity, lower trap density, and longer carrier lifetime. After optimization, a maximum power conversion efficiency (PCE) of 7.64% (VOC = 1.36 V) is obtained for MAPB-0.2MABr based solar cells. Significantly, the non-encapsulated devices exhibit excellent long-term stability in ambient air (25–30 °C and 20–30% relative humidity), showing no degradation after a year’s exposure. While, it also shows superior thermal stability with PCE retaining 95% of the initial efficiency after 120 h under thermal stress of 80 °C and 40–70% relative humidity.

Stable hosts containing pre-stored metallic lithium (Li) are typically used to tackle irregular dendrite formation and infinite relative volume changes of lithium metal anodes. In this sense, oversimplified molten Li infusion strategies have been widely proposed to build lithiophilic architectures with uncontrollable amount and configuration of metallic Li in obtained hosts. In this work, tin oxide (SnO2) deposited Ni foam (SNF) with superior molten Li wettability is employed to construct two distinct lithiophilic architectures namely, Li coated SNF skeletons and Li infiltrated SNF frameworks. The cycling stability and dendritic behavior of these lithiophilic architectures are systematically compared. Both of these lithiophilic architectures significantly outperformed bare Li foils in terms of cycling performance and electrode dimension stability. The fully covered lithiophilic host with Li infiltrated SNF frameworks shows much better cycling stability and lower hysteresis than the porous lithiophilic host with Li coated skeletons, especially at high current densities and large stripping/plating capacities. In full-cell configurations, the batteries based on Li infiltrated SNF frameworks also show significantly higher rate capabilities than Li coated SNF skeletons counterpart. Our results provide a better understanding to design stable lithiophilic hosts for high-rate and high-capacity lithium metal anodes.

Three-dimensional branched TiO2 architectures (3D BTA) with controllable morphologies were synthesized via a facile template-free one-pot solvothermal route. The volume ratio of deionized water (DI water) and diethylene glycol in solvothermal process is key to the formation of 3D BTA assembled by nanowire-coated TiO2 dendrites, which combines the advantages of 3D hierarchical structure and 1D nanoscale building blocks. Benefiting from such unique structural features, the BTA in full bloom achieved significantly increased specific surface areas and shortened Li(+) ion/electrons diffusion pathway. The lithium-ion batteries based on BTA in full bloom exhibited remarkably enhanced reversible specific capacity and rate performance, attributing to the high contact area with the electrolyte and the short solid state diffusion pathway for Li(+) ion/electrons promoting lithium insertion and extraction.