Search

Dyes from industrial wastewaters represent one of the most hazardous pollutants as they are not effectively biodegradable. The present work is focused to study the novel properties of keratin-polyamide blend nanofibrous filtration membranes for treating wastewaters containing dye. Keratin protein was extracted from goat hair, a tannery waste through sulphitolysis process. The extracted keratin was blended with polyamide to prepare a nanofibrous membrane through the electrospinning process. The fabricated pristine polyamide and keratin-altered polyamide membranes were characterized and compared for their properties. Effects of solution pH, dye concentration, membrane flux, and membrane capacity have been examined. Very fine nanofibers and enhanced porosity drive the membrane to enhanced flux and higher filtration efficiencies. At pH 2, the dye removal efficiency of the blend membranes was 100, 99, 98, 90, and 83% for 100, 200, 250, 300, and 400 ppm concentrations of dye, respectively. The keratin-polyamide blend membrane exhibited better properties in all aspects. The results of this present investigation indicate that the presence of keratin in filtration membranes is promising for dye removal from the effluents.

Due to the high toxicity of effluents radiating from tannery industries, there is a need for effluent treatment so as to limit its dangerous impacts on the environment. Fabricating responsive membranes is gaining significant interest in wastewater treatment applications. This study investigates the preparation, characterization, permeation, and antifouling properties of the keratin-polysulfone blend membranes. Keratin, a bioinspired material, is used as the responsive element along with the polysulfone matrix, which together acts as the responsive membranes for efficient filtration. Keratin was extracted from the goat hair, a tannery waste, through ball milling—an ecological, cost-effective, and time-consuming method. Keratin-polysulfone was blended in the ratio 95:5 (v/v) in their respective solvents to prepare nanofiltration membranes. The morphology of the membranes shows the random arrangement of fibers with the interstitial spaces. Contact angle measurements reveal that the keratin-polysulfone blend membranes are partially hydrophilic, which in turn resulted in good antifouling properties. Improved porosity of the fabricated membranes enabled good absorption capacity, and enhanced mechanical properties are an added advantage for the fabricated membranes. Since the membrane showed enhanced filtration property, the post-tanning effluents from the leather industry have been treated by the keratin-polysulfone fabricated membranes. The treated effluent showed a maximum percentage reduction in chemical oxygen demand (COD) and biological oxygen demand (BOD) concentrations of about 53% and 66%, respectively. The dye removal efficiency of the fabricated membrane is reported to be 76%. Thus, filtration efficiency has been established paving a way for treating effluents in an efficient way.