Search

A realistic molecular description of amorphous drug-polymer-plasticizer matrices, suitable for the preparation of amorphous solid dispersions (ASDs) with the aid of fusion-based techniques, was evaluated. Specifically, the incorporation of two model drugs (i.e. ibuprofen, IBU, and carbamazepine, CBZ) having substantially different thermal properties and glass forming ability, on the molecular representation of polyvinyl caprolactam–polyvinyl acetate–polyethylene glycol graft copolymer (SOL)/polyethylene glycol (PEG, working as a plasticizer) molecular and thermal properties were evaluated with the aid of classical molecular dynamics (MD) and docking simulations. Results showed good agreement between molecular modelling estimations and experimentally determined properties. Specifically, the computed Tg values that resulted from MD simulations for IBU-SOL/PEG and CBZ-SOL/PEG (53.8 and 54.2 °C, respectively) were in reasonable agreement with the corresponding values resulting from differential scanning calorimetry (DSC) measurements (49.8 and 50.1 °C), while both molecular modelling and experimental obtained results suggested miscibility among system components. Additionally, interactions between CBZ and SOL observed during MD simulations were verified by FTIR analysis, while MD simulations of the hydration process suggested strong molecular interactions between IBU-SOL and CBZ-SOL.

Nanocrystal formulations of the BCS class II agomelatine, were developed by wet media milling. The most suitable stabilizer was identified and effects of process and formulation variables on the nanocrystal size and ζ-potential were evaluated employing a Box-Behnken experimental design. The optimized nanosuspensions were dried and subsequently evaluated for redispersibility and physicochemical properties. Computational simulation of solid state properties was applied to rationalize crystal fracture. It was found that low viscosity hydroxypropylcellulose with sodium dodecyl sulfate is the most suitable stabilizer. Stabilizer concentration exerts a statistically significant effect on particle size, which depends on the mill's rotation speed. The milling process induces a polymorphic transition to form II, which could affect size reduction kinetics. The solidified nanosuspensions' redispersibility is deteriorating progressively with storage time, with only minor differences between drying methods, retaining enhanced dissolution rate. Crystal lattice simulations suggest high mechanical anisotropy of form I crystals, which could be an additional reason for fast particle size reduction prior to the polymorphic transformation. Wet media milling, combined with a suitable drying method, can be an efficient technique for the production of stable nanocrystals of agomelatine. Particle informatics methods can enhance our understanding of the mechanisms responsible for agomelatine's nanocomminution.

Nanocrystal formation for the dissolution enhancement of glimepiride was attempted by wet media milling. Different stabilizers were tested and the obtained nanosuspensions were solidified by spray drying in presence of mannitol, and characterized regarding their redispersibility by dynamic light scattering, physicochemical properties by differential scanning calorimetry (DSC), FT-IR spectroscopy, powder X-ray diffraction (PXRD), and scanning electron microcopy (SEM), as well as dissolution rate. Lattice energy frameworks combined with topology analysis were used in order to gain insight into the mechanisms of particle fracture. It was found that nanosuspensions with narrow size distribution can be obtained in presence of poloxamer 188, HPC-SL and Pharmacoat&reg, 603 stabilizers, with poloxamer giving poor redispersibility due to melting and sticking of nanocrystals during spray drying. DSC and FT-IR studies showed that glimepiride does not undergo polymorphic transformations during processing, and that the milling process induces changes in the hydrogen bonding patterns of glimepiride crystals. Lattice energy framework and topology analysis revealed the existence of a possible slip plane on the (101) surface, which was experimentally verified by PXRD analysis. Dissolution testing proved the superior performance of nanocrystals, and emphasized the important influence of the stabilizer on the dissolution rate of the nanocrystals.

The correlation between glass forming ability (GFA) and several thermophysical or physicochemical properties of APIs with the formation and the physical stability of amorphous solid dispersions (ASDs) was evaluated in the present study. Eight poorly water-soluble APIs belonging in different GFA classes (i.e. a) GFA Class I: Carbamazepine, CBZ, b) GFA Class II: Agomelatine, AGO, Aprepitant, APT, Rivaroxaban, RIV, and c) GFA Class III: Indomethacin, IND, Pioglitazone, PIO, Piroxixam, PIR, and Simvastatin, SIM) were tested, in addition to six commonly used matrix-carriers (namely povidone, PVP, hydroxypropyl cellulose, HPC-SL, copovidone, coPVP, Soluplus®, SOL, and gelatin) in order to prepared ASDs via film casting approach. Results using polarized light microscopy (PLM) showed a similar drug crystallization tendency from ASDs independently of their GFA classification, glass stability or glass fragility. X-ray diffraction analysis verified the formation and the physical stability of ASD (independently of GFA class) when a suitable matrix-carrier was selected (i.e. SOL for AGO, RIV and SIM, PVP for APT, CBZ and IND, coPVP for PIO and gelatin for PIR). Further attempts to correlate some physicochemical properties (i.e. component's binding affinity and miscibility) with the formation and the crystallization tendency of the prepared ASDs showed no apparent correlation in regards to the different drug GFA classes. Finally, the evaluation of molecular interactions via FTIR analysis also failed to adequately distinguish the differences in regards to the formation and the physical stability of the prepared systems.

Wet media milling, coupled with spay drying, is a commonly proposed formulation strategy for the production and solidification of nanosuspensions in order to overcome the solubility barrier of BCS Class II substances. However, the application of mechanically and thermally intensive processes is not straightforward in the cases of ductile and/or low melting point substances that may additionally be susceptible to eutectic formation. Using ibuprofen (IBU) as a model drug with non-favorable mechanical and melting properties, we attempt to rationalize nanocrystal formulation and manufacturing in an integrated approach by implementing Quality by Design (QbD) methodology, particle informatics techniques and computationally assisted process design. Wet media milling was performed in the presence of different stabilizers and co-milling agents, and the nanosuspensions were solidified by spray-drying. The effects of key process parameters (bead diameter, milling time and rotational speed) and formulation variables (stabilizer type and drug/stabilizer ratio) on the critical quality attributes (CQAs), i.e., Z-average size, polydispersity index (PDI), &zeta, potential and redispersibility of spray-dried nanosuspensions were evaluated, while possible correlations between IBU free surface energy and stabilizer effectiveness were studied. The fracture mechanism and surface stabilization of IBU were investigated by computer simulation of the molecular interactions at the crystal lattice level. As a further step, process design accounting for mass-energy balances and predictive thermodynamic models were constructed to scale-up and optimize the design space. Contemplating several limitations, our multilevel approach offers insights on the mechanistic pathway applicable to the substances featuring thermosensitivity and eutectic tendency.

The present work describes the development of a novel formulation of amorphous agomelatine (AGM) that exhibits enhanced in vitro dissolution rate and bioavailability, as well as improved storage stability. AGM was loaded on a mixture of microcrystalline cellulose with a high specific surface area excipient, namely colloidal silicon dioxide, employing a wet granulation method, and the resultant AGM granules were subsequently formulated into immediate release film-coated tablets. Modulated temperature differential scanning calorimetry, hot-state light microscopy, powder X-ray diffraction, attenuated total reflectance FTIR, and micro-Raman spectroscopy revealed that the active pharmaceutical ingredient existed primarily in the amorphous state within the prepared formulations, with some crystals of polymorph I also present. Accelerated stability studies for up to 6 months in alu-alu blisters showed good physicochemical stability during storage. Finally, in vitro dissolution studies and clinical trials in healthy human volunteers showed a remarkable increase in the in vitro dissolution rate and a ∼1.5-fold increase in bioavailability, respectively, compared to the marketed product.