Search

The low response and sluggish reaction kinetics of graphene-based gas sensors remain as obstacles for practical applications as wearable chemical sensors. To overcome these limitations, we demonstrate a heterogeneous sensitization of nanocatalysts using Pt and ZnO nanoparticles (NPs) on porous reduced graphene oxides (Pt_ZnO/PRGO) driven by a metal-organic framework (MOF)-templated synthesis and subsequent pyrolysis. The pyrolysis of zeolitic imidazolate framework-8 layers grown on graphene oxide leads to the creation of porous carbon frameworks decorated with catalytic Pt and ZnO NPs, which possess increased reaction sites for the target gas. In addition, we investigated the effect of pyrolysis conditions to control the size of ZnO NPs with a 10 nm scale for enhanced catalytic sensitization. As a result, Pt_ZnO/PRGO exhibited improved NO 2 sensing properties with regard to response (43.28 % to 5 ppm), selectivity, and detection limit (0.1 ppm), as well as having reversible reaction kinetics. Potential applications of MOF-derived Pt_ZnO/PRGO in wearable chemical sensors was demonstrated, in which the material exhibited excellent mechanical stability and reliable response after 450 bending cycles. [ABSTRACT FROM AUTHOR]

• To control the porosity, the e-spraying and PS beads templating route are combined, resulting in highly porous structure. • Pt functionalized PH-SnO 2 spheres exhibited high response (R air /R gas = 44.83) toward 5 ppm of acetone. • Pt-PH-SnO 2 spheres exhibited exceptional selectivity toward acetone against interfering molecules. Tailoring of semiconducting metal oxides (SMOs) nanostructures with high porosity is of importance for enhanced gas sensing performance. Hierarchically-assembled SMOs possess high surface area but often suffer from low porosity. Here, bimodal pore-loaded hierarchical SnO 2 (PH-SnO 2) spheres were successfully synthesized via electrostatic spraying method (e-spraying) combined with colloidal templating route using polystyrene beads. The resulting porous PH-SnO 2 spheres were used as sensing layers for detection of acetone, which exhibited about 20 % enhanced response compared with hierarchical SnO 2 (H-SnO 2) spheres without pores. In addition, e-spraying is a fascinating technique for uniform catalytic functionalization through a simple dispersion of catalytic nanoparticle (NPs) in the e-spraying solution to improve the sensing performance. As a result, the Pt-functionalized PH-SnO 2 (Pt-PH-SnO 2) spheres showed dramatically improved acetone detection capability with a response (R air /R gas) of 44.83 at 5 ppm as compared to PH-SnO 2 spheres (R air /R gas = 6.61) as well as superior selectivity. In this work, the unique combination of e-spraying and PS templating route paves the way for robust and facile synthetic method for bimodal pore loaded 3D hierarchical SMOs, and demonstrates the feasibility for application in exhaled breath sensors. [ABSTRACT FROM AUTHOR]