Search

Quaternary sputtered TiAlSiN coatings were investigated for their high temperature structural stability, surface morphology, mechanical behaviors, surface chemical bonding states, solar absorptance and thermal emittance for possible solar selective surface applications. The TiAlSiN films were synthesized, via unbalanced magnetron sputtered technology, on AISI M2 steel substrate and annealed at 500 °C - 800 °C temperature range. SEM micrographs show nanocomposite-like structure with amorphous grain boundaries. Nanoindentation analyses indicate a decrease of hardness, plastic deformation and constant yield strength for the coatings. XPS analysis show mixed Ti, Al and Si nitride and oxide as main coating components but at 800 °C the top layer of the coatings is clearly composed of only Ti and Al oxides. Synchrotron radiation XRD (SR-XRD) results indicate various Ti, Al and Si nitride and oxide phases, for the above annealing temperature range with a phase change occurring with the Fe component of the substrate. UV–Vis spectroscopy, FTIR spectroscopy studies determined a high solar selectivity, s of 24.6 for the sample annealed at 600 °C. Overall results show good structural and morphological stability of these coatings at temperatures up to 800 °C with a very good solar selectivity for real world applications. [ABSTRACT FROM AUTHOR]

Chromium nitride (CrN)-based materials display broad applications as protective coatings for automotive, power generation and aerospace industries, in which surfaces are often subjected to wear and corrosion. By using an appropriate choice of dopant, one can further increase the mechanical hardness, corrosion and oxidation resistance of these coatings. In order to identify the effect of dopants on the structural evolution and surface electronic properties of CrN coatings, Cr 1- z (Al/Si) z N coatings were prepared by magnetron sputtering and then characterized via X-ray diffraction (XRD) and soft X-ray synchrotron radiation Near-edge X-ray Absorption Fine Structure (NEXAFS) studies around N K -edge. Higher degree of crystallinity of the coatings were identified through XRD studies. The bonding structure, of the doped CrN coating, was analyzed by Near-edge X-ray Absorption Fine Structure (NEXAFS) measurements performed around the N K -edge (390–450 eV) in the Auger electron yield (AEY) and total fluorescence yield (TFY) modes. NEXAFS analysis revealed Cr 3d (Al3 p /Si3 p )N2 p hybridizations in Cr 1- z (Al/Si) z N compositions and complex structure splitting via spin–orbit interaction of the Cr3 d levels. [ABSTRACT FROM AUTHOR]

• Effect of Mo target power on vacuum sputtered Mo doped Cr nitride coatings. • The crystallite size of coatings increases with Mo target power and Mo content. • Coatings are transparent in the visible region with direct optical band gap. • Computational modelling provides insight to the electronic and optical properties. • Good solar selectivity of chromium nitride with high mechanical properties. In this study, Cr−Mo−N thin films with different Mo contents were synthesised via closed field unbalanced magnetron sputtering ion plating. The effects of Mo content on the microstructure, chemical bonding state, and optical properties of the prepared films were investigated by X-ray diffraction spectroscopy (XRD), X-ray photoelectron spectroscopy (XPS), field emission scanning electron microscopy, and ultraviolet-visible spectrophotometry. XRD results determined the face centered cubic (fcc) structure of pure CrN film. The incorporation of molybdenum (Mo) in the CrN matrix was confirmed by both XRD and XPS analyses. The CrMoN coatings demonstrate various polycrystalline phases including CrN, γ -Mo 2 N, Cr with oxides layers of MoO 3 , CrO 3 , and Cr 2 O 3. Microstructural results of the Cr-Mo-N coatings show that the grain size increased with an increase in Mo content due to the formation of MoN phase, in which the Mo atoms interact with N atoms around the grain boundaries of the CrN phase. XPS investigations confirmed the presence of Cr, Mo, N, C and O elements in the studied coatings. The optical results revealed that the synthesised coatings exhibit low reflection magnitudes in the visible region of the solar spectrum indicating good antireflection surfaces. Mo doped thin coatings improve the solar absorptance by ~76% in the wavelength range of 200–800 nm with a low thermal emittance of ~ 20% in the infrared range (up to 4000 nm). Furthermore, by applying density functional theory, the computational simulation provides similar trends as the experimental finding of absorption coefficient in the wavelength range. [ABSTRACT FROM AUTHOR]