Search

Biochar produced from wood residues may provide a new method and material for managing the environment, particularly in terms of carbon sequestration and contaminant remediation. Additionally, biochar produced from wood residues is free of chemical fertilizers, likewise in rice straw, wheat straw, corn straw, etc. This study investigated the removal of iron from aqueous solutions by a novel low-cost and eco-friendly biochar made from hardwood trees and modified by adding MgCl 2 for effective phosphate removal. Optimal adsorption conditions were determined through studies of adsorption time, pH, and adsorbent dosage. Batch equilibrium isotherm and kinetic experiments and pre/post-adsorption characterizations using FESEM-EDS, XRD, and FTIR suggested that the presence of carboxyl group elements and colloidal and nano-sized MgO (periclase) particles on the biochar surface were the main adsorption sites for aqueous iron and phosphate respectively. In this study, the HW and MgO-HW biochar showed excellent Dubinin-Radushkevich isotherm (D-R) maximum adsorption capacities of 289.45 and 828.82 mg/g for iron and phosphate. The kinetic study for iron and phosphate adsorption was described well by pseudo second-order model and pseudo second-order model respectively. The HW biochar and the prepared MgO-HW biochar exhibited commendable iron adsorption (98.25%) performance at 10 pH units and phosphate (96.22%) at pH 6 respectively. Thus, this research reveals a waste-to-wealth strategy by converting hardwood waste into mineral-biomass biochar with excellent Fe and P adsorption capabilities and environmental adaptability., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Composting faces challenges with nitrogen (N) losses through ammonia (NH 3 ) and nitrous oxide (N 2 O) emissions. In this study, wood vinegar (WV) and biochar (BC) were applied individually or combined into wheat straw and chicken manure composting. Results showed that BC and WV reduced NH 3 volatilizations by 22-23 % individually, but their combined application achieved a 59 % reduction. However, this combination increased N 2 O emissions by 174 %. The BC + WV treatment improved compost quality, evidenced by increased total N content by 22 % and enhanced the biological index, promoting additional dissolved organic matter production. Overall, BC and WV applications improved compost quality, reduced gaseous N losses, and supported the re-utilization of agricultural residues. The combined use of BC and WV significantly enhances compost quality and reduces NH 3 emissions, offering a promising solution for sustainable agricultural residue management., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

ABSTRACT The problem of wastewater pollution in the production of monosodium glutamate (MSG) is becoming more and more serious. A novel type of chemically modified Salix psammophila powder charcoal (SPPC AM ) was synthesized to address the chemical oxygen demand (COD) and ammonia nitrogen (NH 3 -N) in MSG wastewater. SPPC AM was prepared by carbonization method, in which inorganic ammonium molybdate (AM) was used as modifier and Salix psammophila powder (SPP) was used as raw material. Under optimal treatment conditions, maximum removal rates (removal capacities) of 45.9% (3313.2 mg·L -1 ) for COD and 29.4% (23.2 mg·L -1 ) for NH 3 -N in MSG wastewater were achieved. The treatment results significantly outperforming the unmodified Salix psammophila powder charcoal (SPPC), which only achieved removal rates (removal capacities) of 10.6% (763.9 mg·L -1 ) for COD and 12.9% (10 mg·L -1 ) for NH 3 -N. SPPC and SPPC AM before and after preparation were analysed by FT-IR and XRD, and Mo ions in the form of Mo 2 C within SPPC AM were successfully loaded. SEM , EDS-Mapping , BET , and other methods were used to analyse SPPC AM before and after MSG wastewater treatment, demonstrating that SPPC AM effectively treated organic pollutants in monosodium glutamate wastewater. The NH 3 -N in the treated MSG wastewater has reached the standard of safe discharge.

To control acid mine drainage (AMD) from the source, a new environmentally and green passivator (biochar) has been introduced to passivate pyrite. To reduce the difficulty of biochar preparation and cost, and improve its production scale, in-situ pyrolysis of applewood by smoldering to produce biochar. Here, particle size, moisture content and gas flow rate were selected to prepare biochar by smoldering through orthogonal combination, and the pyrite was passivated with different conditions and biochar concentrations (2 g/L, 3 g/L, 4 g/L). The results revealed that when the particle size is 200 mm×200 mm×20 mm, the water content is 20-30%, and the gas flow rate is 0.4 L/m 3 , the biochar yield is the highest. Biochar promotes the formation of passivating layer (jarosite), inhibits the release of metal ions. Increasing biochar concentration can promote the formation of jarosite and enhance the passivation effect on pyrite., (© 2024. The Author(s), under exclusive licence to Springer Science+Business Media, LLC, part of Springer Nature.)

Biogas residues (i.e., digestate) are rich in NH 4 + that has great agricultural value but environmental risk if not recycled. Biochar can be an effective adsorbent retaining NH 4 + from digestate. However, it remains unclear how the unique composition of digestate affects the capacity and mechanisms of NH 4 + adsorption on biochar. This study examined the mechanisms and driving factors of NH 4 + recovery from digestate containing different molecular-weight organic particles by using wood-derived biochar with or without H 2 O 2 modification. Four solutions were prepared, including pure NH 4 + , synthetic NH 4 + with multiple cations mimicking digestate solution, supernatant of digestate with small organic particles and dissolved organic matter, and digestate mixture containing supernatant and large organic particles. The results showed that compared with pure NH 4 + solution, the adsorbed NH 4 + was 42% lower in the synthetic NH 4 + solution with multiple cations but was 2.2 time higher in the supernatant of digestate on two biochars following 48-h adsorption. Modified biochar did not change NH 4 + adsorption in pure NH 4 + solution despite higher specific surface area than raw biochar, but it increased the adsorption of NH 4 + in digestate solutions with high pH (e.g., 4.03 vs. 3.37 mg N g -1 for modified and raw biochar, respectively, in the supernatant of digestate). Compared with the supernatant, the large organic particles in digestate mixture significantly but slightly decreased NH 4 + adsorption on modified but not raw biochar. The desorption rate of NH 4 + on the biochar was up to 74%-100%, and it was not supressed by the adsorption of organic particles in digestate. The findings here demonstrate the dominant role of electrostatic attraction in NH 4 + adsorption, the important role of high pH and organic particles in digestate in facilitating NH 4 + adsorption on biochar, and the suitability of the wood-derived biochar in recovering NH 4 + from digestate and releasing N for agricultural application., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 The Authors. Published by Elsevier B.V. All rights reserved.)

Biodegradable plastics, as an alternative to petroleum plastics, are fiercely increasing, but their incomplete degradation under natural conditions may lead to the breakdown into microplastics (MPs). Here, we explored the impacts of chicken manure-derived (MBC) and wood waste-derived biochar (WBC) on the degradation of polylactic acid microplastics (PLA-MPs) during soil incubation for one year. Both biochars induced more pronounced degradation characteristics in PLA-MPs, including enhanced surface roughness, the proportion of MPs < 100 µm by 12.89 %-25.67 %, oxygen loading and O/C ratio to 71.74 %-75.87 % and 1.70-1.76, as well as accelerated carbon loss and the cleavage of ester group and C-C bond. Also, biochar increased soil pH, depleted inorganic nitrogen and available phosphorus, and changed enzymic activity in PLA-MP-polluted soils. We proposed that both biochars accelerated the PLA-MP degradation by inducing alkaline, aminolysis/ammonolysis, oxidative, and microbial degradation. Among these, MBC induced aminolysis/ammonolysis by NH 4 + via Fe 2+- driven NO 3 - /NO 2 - reduction and microbial nitrogen fixation, and oxidative degradation by radicals generated through Fenton/Fenton-like reaction. WBC caused aminolysis/ammonolysis and oxidative degradation mainly through dissimilatory nitrate reduction to ammonium and surface free radicals on biochar. These findings indicate that biochar has the potential to accelerate PLA-MP degradation, and its regulatory mechanism depends on the type of biochar., Competing Interests: Declaration of Competing Interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier B.V. All rights reserved.)

Lignin syringyl to guaiacyl ratio (S/G) has long been suspected to have measurable impacts on biochar formation, but these effects are challenging to observe in biochars formed from whole biomass. When the model bioenergy feedstock Populus trichocarpa (cottonwood), with predictable lignin macromolecular structure tied to genetic variation, is used as feedstock for biochar production, these effects become visible. In this work, two P. trichocarpa variants having lignin S/G of 1.67 and 3.88 were ground and pyrolyzed at 700 °C. Water-demineralization of feedstock was used to simultaneously evaluate any synergistic influences of S/G and naturally-occurring potassium on biochar physicochemical properties and performance. The strongest effects of lignin S/G were observed on specific surface area (S BET ) and oxygen-content, with S/G of 1.67 improving S BET by 11% and S/G of 3.88 increasing total oxygen content in demineralized biochars. Functional performance was evaluated by breakthrough testing in 1% NH 3 . Breakthrough times for biochars were nearly double that of a highly microporous activated carbon reference material, and biochar with S/G of 3.88 had 10% longer breakthrough time than its lower S/G corollary. Results support a combination of pore structure and oxygen-functionalities in controlling ammonia breakthrough for biochar., (© 2024. The Author(s).)

Feedstock characteristics impact biochar physicochemical properties, and reproducible biochar properties are essential for any potential application. However, in most articles, feedstock aspects (i.e., taxonomic name of the species, part of the plant, and phenological phase) are scarcely reported. This research aimed at studying the effect of species and phenological stage of the feedstock on the properties of the derived biochars and, thus, adsorption capacities in water treatment. In this study, we analysed the anatomical characteristics of three different woody bamboo species [Guadua chacoensis (GC), Phyllostachys aurea (PA), and Bambusa tuldoides (BT)] in culms harvested at two different phenological phases (young and mature), and statistically correlated them with the characteristics of the six derived biochars, including their adsorption performance in aqueous media. Sclerenchyma fibres and parenchyma cells diameter and cell-wall width significantly differed among species. Additionally, sclerenchyma fibres and parenchyma cell-wall width as well as sclerenchyma fibre cell diameters are dependent on the phenological phase of the culms. Consequently, differences in biochar characteristics (i.e., yield and average pore diameter) were also observed, leading to differential methylene blue (MB) adsorption capacities between individuals at different phenological phases. MB adsorption capacities were higher for biochar produced from young culms compared to those obtained from matures ones (i.e., GC: 628.66 vs. 507.79; BT: 537.45 vs. 477.53; PA: 477.52 vs. 462.82 mg/g), which had smaller cell wall widths leading to a lower percentage of biochar yield. The feedstock anatomical properties determined biochar characteristics which modulated adsorption capacities., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Energy application potential from the abundant biomass residues is inadequately exploited. Over-dependence on forest trees, its negative environmental impacts, and ever-rising energy costs require alternative production technologies including briquetting. The physico-mechanical and combustion properties of binderless and bindered Alstonia boonei sawdust and Theobroma cacao (cocoa) pod briquettes, carbonized in a steel kiln (at 410±5°C, and a heating rate of 4°C/min from the ambient temperature of 25°C), piston-pressed at 9.0 MPa, were studied. The binders were starch, wax, and clay. Starch-bindered T. cacao pod briquettes recorded the maximum bulk density (640 kg/cm3), while basic density was greatest for sawdust/clay briquette (433 kg/cm3). Sawdust/wax briquette produced much Water Resistance Capacity (76.76%) with safer carbon monoxide (CO) emissions (0.67 ppm). A. boonei sawdust/starch briquettes recorded the greatest calorific value (24.023 MJ/kg), least specific fuel consumption (0.0483 kg/l), and slowest burning rate (0.0005 kg/min). All but T. cacao pod/starch and Sawdust/starch emitted CO below the safe air quality Standard of ≤ 6ppm (24h mean). Binderless sawdust, sawdust/starch and T. cacao pod/starch briquettes recorded 47.86, 20.95 and 11.40 μg/m3 particulate matter (PM2.5) respectively, which are below WHO Air Quality Standard safe for domestic uses. Binderless T. cacao pod produced more harmful CO and PM2.5 than its non-bindered A. boonei sawdust counterpart. Clay-bindered briquettes were the most durable. Briquetting, 'a waste-to-energy technology', enhances bio-residue management for domestic and industrial spaces in the global energy mix., Competing Interests: The authors have declared that no competing interests exist., (Copyright: © 2024 Glalah et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.)

Use of waste wood biomass for bioenergy produces wood ash as a by-product; this ash is typically landfilled, but can potentially play an important role in soil improvement and forest restoration. In particular, high-carbon wood ash biochar (HCWAB) could supply nutrients, improve substrate water-holding capacity and pH, and emulate the ecosystem benefits of wildfire residues. Thickened tailings sites at metal mines across Canada are subject to stringent restoration regulations that entail planting of native trees to promote rapid reforestation. While HCWAB may prove beneficial in this context, field trials have been very limited to date. We conducted a large-scale, replicated field trial on sand-capped tailings at an operational gold mine in the Canadian boreal forest to assess the impact of HCWAB (at dosages of 0, 6.4, 12.8, and 19.1 t/ha) on survival and growth of four native tree species, as well as substrate chemical properties and element uptake in tree tissues. After 2 years, the survival of planted, native trees was highest at low to moderate application rates; HCWAB dosages above 13 t/ha presented reduced tree survival to levels comparable to unamended substrates. Tree growth was higher across all HCWAB doses relative to growth in samples planted on untreated substrates; tree species and initial size also had large impacts on final tree survival and aboveground growth. The survival of Betula papyrifera was significantly higher than other species, while smaller transplanted trees in general survived in greater numbers compared to larger size classes. Volunteer herbaceous vegetation significantly increased at the higher HCWAB application dosages and tree performance was negatively correlated with vegetation cover, consistent with a resource competition effect. HCWAB additions to sand-capped mine tailings did not significantly alter tree tissue concentrations or substrate availability of potentially toxic metals (Cd, Cu, Al). We conclude that low to moderate dosages of HCWAB on sand-capped tailings, particularly between 6.4 and 12.8 t/ha, may offer benefits to early tree survival, growth, and substrate nutrient status without causing significant risks of phytotoxicity and recommend future field trials focus on strategies to reduce tree competition with competing vegetation., (© 2024. The Author(s), under exclusive licence to Springer-Verlag GmbH Germany, part of Springer Nature.)

Industrial wastewater contains a wide range of pollutants that, if released directly into natural ecosystems, have the potential to pose serious risks to the environment.This study aims to investigate sustainable and efficient approaches for treating tannery wastewater, employing a combination of hyphenated Fenton oxidation and adsorption processes. Rigorous analyses were conducted on wastewater samples, evaluating parameters like COD, sulphide, NH 3 -N, PO 4 3- , NO 3 - , and Cr(VI). The performance of this adsorbent material was gauged through column adsorption experiments. A comprehensive characterization of the adsorbent was undertaken using techniques such as SEM, EDX, BET, FTIR, XRD, and LIBS. The study delved into varying operational parameters like bed depth (ranging from 3.5 to 9.5 cm) diameter (2.5 cm) and influent flow rate (ranging from 5 to 15mLmin -1 ). The experimental outcomes revealed that increasing the bed depth and decreasing the influent flow rate significantly bolstered the adsorption column's effectiveness. Breakthrough curves obtained were fitted with different models, including the Thomas and Yoon-Nelson models. The most optimal column performance was achieved with a bed height of 10.5 cm and a flow rate of 5mLmin -1 . The combined process achieved removal efficiencies of 94.5% for COD, 97.4% for sulphide, 96.2% for NH 3 -N, 83.1% for NO 3 - , 79.3% for PO 4 3- , and 96.9% for Cr(VI) in tannery effluent. This research presents a notable stride toward the development of sustainable and efficient strategies for tannery wastewater treatment., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Inc. All rights reserved.)

Owing to the diversity of biomasses and many variables in pyrolysis process, the property of biochar from varied biomass feedstock or even same biomass could differ significantly. Since the property of biochar governs the further application of biochar, this review paid particular attention to the correlation between the nature of biomass feedstock and the specifications of biochar in terms of yield, elemental composition, pH, functionalities, heating value, pore structures, morphologies, etc. The property of the biochar from the pyrolysis of cellulose, hemicellulose, lignin, woody biomass (pine, mallee, poplar, acacia, oak, eucalyptus and beech), bark of woody biomass, leaves of woody biomass, straw, algae, fruit peels, tea waste was compared and summarized. In addition, the differences of the biochar of these varied origins were also analyzed. The remaining questions, about the correlation of biomass nature with biochar characteristics, to be further investigated are analyzed in detail. The deduced information about the relationship of the nature of biochar and biomass feedstock as well as key pyrolysis parameters is of importance for further development of the methods for tailoring or production of the biochar of desirable properties. The results from this study could be interesting technically and commercially for the technology developer using biochar as the source of carbon in different applications., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024. Published by Elsevier Ltd.)

Recent research has found biochar to be a cost-effective adsorbent for removal of perfluoroalkyl substances in water. To promote cleaner production and sustainable waste management, this study explored the potential to produce activated biochars by co-pyrolyzing sawdust with iron-rich biosolids and polyaluminum sludge. The maximum capacity to adsorb perfluorooctanesulfonic acid (PFOS) reached 27.2 mg g -1 with biosolids-activated biochar and 19.2 mg g -1 with aluminum sludge-activated biochar, compared to 6.2 mg g -1 with sawdust biochar. The increased adsorption capacities were attributed to electrostatic interactions between the anionic PFOS and metal functionalities on the biochar surface. In contrast, hydrophobic interaction was the dominant adsorption mechanism of sawdust biochar. The presence of dissolved organic matter at 5-50 mg L -1 was found to inhibit adsorption of PFOS in water, while pH as low as 3.0 and sodium chloride concentrations up to 100 mM enhanced removal of PFOS by all the three adsorbents. In batch adsorption tests at environmentally relevant PFOS dosages and adsorbent dosage of 0.25 g L -1 , the biosolids-sawdust biochar and Al sludge-sawdust biochar removed 71.4% and 66.9% of PFOS from drinking water and 77.9% and 87.9% of PFOS from filtrate of sludge digestate, respectively. The biosolids-sawdust biochar additionally removed Fe, although the Al sludge-sawdust biochar released Al into the alkaline drinking water and filtrate. Overall, this study proved co-pyrolyzing sawdust and Fe-rich biosolids to be an effective approach to activate sawdust biochar for enhanced removal of PFOS while recycling wastewater treatment residuals and sawdust., Competing Interests: Declaration of competing interest The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper., (Copyright © 2024 Elsevier Ltd. All rights reserved.)

Large amount of wastes are burnt or left to decompose on site or at landfills where they cause air pollution and nutrient leaching to groundwater. Waste management strategies that return these food wastes to agricultural soils recover the carbon and nutrients that would otherwise have been lost, enrich soils and improve crop productivity. The incorporation of liming materials can neutralize the protons released, hence reducing soil acidity and its adverse impacts to the soil environment, food security, and human health. Biochar derived from organic residues is becoming a source of carbon input to soil and provides multifunctional values. Biochar can be alkaline in nature, with the level of alkalinity dependent upon the feedstock and processing conditions. This study conducted a characterization of biochar derived from the pyrolysis process of eggplant and Acacia nilotica bark at temperatures of 300 °C and 600 °C. An analysis was conducted on the biochar kinds to determine their pH, phosphorus (P), as well as other elemental composition. The proximate analysis was conducted by the ASTM standard 1762-84, while the surface morphological features were measured using a scanning electron microscope. The biochar derived from Acacia nilotica bark exhibited a greater yield and higher level of fixed carbon while possessing a lower content of ash and volatile components compared to biochar derived from eggplant. The eggplant biochar exhibits a higher liming ability at 600 °C compared to the acacia nilotica bark-derived biochar. The calcium carbonate equivalent, pH, potassium (K), and phosphorus (P) levels in eggplant biochars increased as the pyrolysis temperature increased. The results suggest that biochar derived from eggplant could be a beneficial resource for storing carbon in the soil, as well as for addressing soil acidity and enhancing nutrients availability, particularly potassium and phosphorus in acidic soils., (© 2024. The Author(s).)

Nine biochars were produced by co-pyrolysis of sawdust and biological sludge following the "design of experiment" approach. Two kinds of sludge (both deriving from the treatment of mixed industrial-municipal wastewater) and two types of woody waste were selected as categorical predicting variables, while contact time, pyrolysis temperature, and sludge percentage were used as quantitative variables. Biochars were analysed for their product characteristics and environmental compatibility based on the European Standards (EN 12915-1:2009) for materials intended for water treatment (i.e. ash content, water leachable polycyclic aromatic hydrocarbons (PAHs) and elements), as well as for specific surface area (SSA), using them as response variables of a multivariate partial least square multiple regression, whose results provided interesting insights on the relationships between pyrolysis conditions and biochar characteristics. Biochars produced with sludge and/or providing the highest SSA values (258-370 m 2  g -1 ) were selected to undergo a sustainable chemical treatment using a by-product of the gasification of woody biomass, complying in all cases with European Standards and achieving therefore the end-of-waste status for sewage sludge. The biochar deriving from the highest percentage of sludge (30% by weight) and with the highest SSA (390 m 2  g -1 ) was thermally activated achieving SSA of 460 m 2  g -1 and then tested for the sorption of direct yellow 50 and methylene blue in ultrapure water and real wastewater, compared to a commercial activated carbon (AC). The biochar showed Langmuir sorption maxima (Q m ) 2-9 times lower than AC, thus highlighting promising sorption performances. Q m for methylene blue in wastewater (28 mg‧g -1 ) was confirmed by column breakthrough experiments., (© 2024. The Author(s).)

Due to a large number of harmful chemicals flowing into the water source in production and life, the water quality deteriorates, and the use value of water is reduced or lost. Biochar has a strong physical adsorption effect, but it can only separate pollutants from water and cannot eliminate pollutants fundamentally. Photocatalytic degradation technology using photocatalysts uses chemical methods to degrade or mineralize organic pollutants, but it is difficult to recover and reuse. Woody biomass has the advantages of huge reserves, convenient access and a low price. Processing woody biomass into biochar and then combining it with photocatalysts has played a complementary role. In this paper, the shortcomings of a photocatalyst and biochar in water treatment are introduced, respectively, and the advantages of a woody biochar-based photocatalyst made by combining them are summarized. The preparation and assembly methods of the woody biochar-based photocatalyst starting from the preparation of biochar are listed, and the water treatment efficiency of the woody biochar-based photocatalyst using different photocatalysts is listed. Finally, the future development of the woody biochar-based photocatalyst is summarized and prospected., Competing Interests: The authors declare no conflicts of interest.

Fuel treatments and other forest restoration thinning practices aim to reduce wildfire risk while building forest resilience to drought, insects, and diseases and increasing aboveground carbon (C) sequestration. However, fuel treatments generate large amounts of unmerchantable woody biomass residues that are often burned in open piles, releasing significant quantities of greenhouse gases and particulates, and potentially damaging the soil beneath the pile. Air curtain burners offer a solution to mitigate these issues, helping to reduce smoke and particulates from burning operations, more fully burn biomass residues compared to pile burning, and eliminate the direct and intense fire contact that can harm soil beneath the slash pile. In an air curtain burner, burning takes place in a controlled environment. Smoke is contained and recirculated by the air curtain, and therefore burning can be conducted under a variety of climatic conditions (e.g., wind, rain, snow), lengthening the burning season for disposal of slash material. The mobile pyrolysis unit that continuously creates biochar was specifically designed to dispose of residual woody biomass at log landings, green wood at landfills, or salvaged logged materials and create biochar in the process. This high-carbon biochar output can be used to enhance soil resilience by improving its chemical, physical, and biological properties and has potential applications in remediating contaminated soils, including those at abandoned mine sites. Here, we describe the general use of this equipment, appropriate siting, loading methods, quenching requirements, and lessons learned about operating this new technology.

To explore the applicability of the carbon isotope composition (δ13C) of fossil charcoal for the quantitative reconstruction of paleoclimates, we selected five points in Shaanxi province, from north to south, to collect modern Pinus species and Quercus species to sample covering areas with obvious climatic differences. In order to reveal the relationships between δ13C of charcoal and climate variables on the basis of carbonization experiments, we evaluated the fractionation mechanism of δ13C of charcoal, and compared the differences between δ13C of charcoal in wildfire experiments and indoor experiments regarding genera and species. The results showed significant differences in δ13C between genera but no significant differences among species. Additionally, the δ13C of charcoal was significantly negatively correlated with precipitation and positively correlated with evaporation, which could be determined from δ13C values in the study area to reconstruct ancient precipitation and evaporation in the future., Competing Interests: The authors have declared that no competing interests exist.

Biochar is recognized as an efficient amendment and soil improver. However, environmental and quality assessments are needed to ensure the sustainability of its use in agriculture. This work considers the biochar's chemical-physical characterization and its potential phyto- and geno-toxicity, assessed with germination and Ames tests, obtaining valuable information for a safe field application. Three biochar types, obtained from gasification at different temperatures of green biomasses from the Tuscan-Emilian Apennines (in Italy), were compared through a broad chemical, physical and biological evaluation. The results obtained showed the relevance of temperature in determining the chemical and morphological properties of biochar, which was shown with several analytical techniques such as the elemental composition, water holding capacity, ash content, but also with FTIR and X-ray spectroscopies. These techniques showed the presence of different relevant surface aliphatic and aromatic groups. The procedures for evaluating the potential toxicity using seeds germination and Ames genotoxicity assay highlights that biochar does not cause detrimental effects when it enters in contact with soil, micro- and macro-organisms, and plants. The genotoxicity test provided a new highlight in evaluating biochar environmental safety., Competing Interests: Declaration of competing interest The authors declare the following financial interests/personal relationships which may be considered as potential competing interests: Nelson Marmiroli reports financial support was provided by European Commission. Nelson Marmiroli reports financial support was provided by Emilia-Romagna Region. Elena Maestri reports financial support was provided by European Commission., (Copyright © 2022 Elsevier B.V. All rights reserved.)

Aromatic moieties of biochar are considered as key components for immobilizing hydrophobic organic contaminants in the environment. However, the relative importance of different aromatic moieties such as low-/high-condensation components in sorption has not been comprehensively investigated. In this study, biochar was produced from flue-cured tobacco straw (TB) and pine wood sawdust (WB) at various pyrolysis temperatures (200-600 °C). Aromatic moieties were characterized via elemental analysis, Fourier transform infrared spectroscopy, Raman spectroscopy, and benzene polycarboxylic acid molecular markers (BPCAs). The significance of different aromatic moieties in the sorption of phenanthrene (PHE) and bisphenol A (BPA) was assessed based on the individual BPCA patterns. The results indicated that aromaticity and aromatic moiety contents increased with increasing pyrolysis temperature. Biochar at 200 °C produced lower mellitic acid (B6CA) contents (18.7-27.9%) than the others. When the pyrolysis temperature was increased to 600 °C, the B6CA contents representing high-condensation aromatic moieties accounted for 55.4-60.9% of all the aromatic moieties. The unitary linear regressions between the individual BPCA distribution patterns and the n values and log K d suggested that the high-condensation aromatic moieties played a more significant role than the low-condensation aromatic moieties (represented by B3CA-B5CA) in facilitating sorption nonlinearity (for PHE and BPA) and sorption capacity (for PHE). The elevated sorption of PHE can be attributed to the increased specific surface area and hydrophobicity of the newly formed aromatic moieties. Hydrogen bonds and π-π electron-donor-acceptor were the main mechanisms of BPA sorption. Because the WB biochar contained more aromatic moieties and more O-containing groups on the surface of the TB biochar, the WB exhibited a higher sorption for PHE; however, slightly elevated sorption was observed on the TB for BPA. This research may provide a new perspective in understanding the behavior of biochar aromatic moieties in sorption of organic contaminants., (Copyright © 2022 The Authors. Published by Elsevier Inc. All rights reserved.)

The aim of this study was to prepare activated carbon materials with different porous structures. For this purpose, the biomass precursor, beech wood, was carbonized in an inert atmosphere, and the obtained charcoal was physically activated using carbon dioxide at 1273 K. Different porous structures were obtained by controlling the time of the activation process. Prepared materials were characterized in terms of textural (N 2 sorption at 77 K), structural (XRD), and sorption properties (CO 2 , C 2 H 4 , C 4 H 10 ). The shortest activation time resulted in a mostly microporous structure, which provided a high sorption of CO 2 . Increasing the activation time led to an increasing of the pores' diameters. Therefore, the highest ethene uptake was obtained for the material with an intermediate activation time, while the highest butane uptake was obtained for the material with the highest activation time.

Anthracology is the identification of charcoal remains through wood anatomy. Paleoecological and paleoethnobotanical evidence from anthracological studies provides information on past environments as well as the fuel economy and use of plants by those living in ancient societies. Historical ecology and forest conservation can also accrue from findings in anthracological studies. Charcoal identification must rely on adequate reference material, in particular reference collections and descriptions of charcoal anatomy. This paper presents charcoal anatomy descriptions of fifteen Brazilian native species that occur in the Atlantic Forest and the Amazon Rainforest. The charcoal anatomy of six of these species is here described for the first time. Samples were analyzed under a reflected light microscope; the descriptions followed the procedures and terminology recommended by the International Association of Wood Anatomists. Increased knowledge of the charcoal and wood anatomy of native tropical species may improve taxonomic identification, thereby increasing accordingly the amount and quality of data for sociocultural inferences about past societies. In addition, it contributes to a better knowledge of the native flora, which helps to prevent deforestation and to drive more sustainable charcoal production chains.

Vertical translocation/leaching of sulfamethoxazole (SMZ) through manure-amended sandy loam soil and significance of biochar application on SMZ retention were investigated in this study. Soil was filled in columns and amended with manure spiked with 13.75 mg kg -1 (S1), 27.5 mg kg -1 (S2), and 55 mg kg -1 (S3) of SMZ. Jujube ( Ziziphus jujube L.) wood waste was transformed into biochar and mixed with S3 at 0.5% (S3-B1), 1.0% (S3-B2), and 2.0% (S3-B3) ratio. Cumulative SMZ leaching was lowest at pH 3.0, which increased by 16% and 34% at pH 5.0 and 7.0, respectively. A quicker release and translocation of SMZ from manure occurred during the initial 40 h, which gradually reduced over time. Intraparticle diffusion and Elovich kinetic models were the best fitted to leaching data. S3 exhibited the highest release and vertical translocation of SMZ, followed by S2, and S1; however, SMZ leaching was reduced by more than twofold in S3-B3. At pH 3.0, 2.0% biochar resulted in 99% reduction in SMZ leaching within 72 h, while 1.0% and 0.5% biochar applications reduced SMZ leaching to 99% within 120 and 144 h, respectively, in S3. The higher SMZ retention onto biochar could be due to electrostatic interactions, H-bonding, and π-π electron donor acceptor interactions.

The paper presents the results of the model experiment on spring barley (Hordeum vulgare L.) grown in polluted soil. The influence of separate and combined application of wood biochar and heavy metal-tolerant bacteria on morpho-physiological, anatomical and ultrastructural parameters of H. vulgare L. has been studied. The joint application of biochar and bacteria increased the shoot length by 2.1-fold, root length by 1.7-fold, leaf length by 2.3-fold and dry weight by threefold compared to polluted variant, bringing the plant parameters to the control level. The maximal quantum yield of photosystem II decreased by 8.3% in H. vulgare L. grown in contaminated soil, whereas this decrease was less in biochar (7%), bacteria (6%) and in combined application of bacteria and biochar (5%). As for the transpiration rate, the H. vulgare L. grown in polluted soil has shown a decrease in transpiration rate by 26%. At the same time, the simultaneous application of biochar and bacteria has led to a significant improvement in the transpiration rate (14%). The H. vulgare L. also showed anatomical (integrity of epidermal, vascular bundles, parenchymal and chlorenchymal cells) and ultrastructural (chloroplasts, thylakoid system, plastoglobules, starch grains, mitochondria, peroxisomes, ribosomes, endoplasmic reticulum, vacuoles) changes, revealed by light-optical and transmission electron microscopy of leaf sections. The effects were most prominent in H. vulgare L., grown in polluted soil but gradually improved with application of biochar, bacteria and their combination. The use of biochar in combination with metal-tolerant bacteria is an efficient tool for remediation of soils, contaminated with heavy metals. The positive changes caused by the treatment can be consistently traced at all levels of plant organization.

Vegetation concrete is one of the most widely used substrates for slope ecological protection in China. However, there are still some imperfections that are disadvantageous for plant growth, such as high density, low porosity, insufficient nutrient retention ability and so on. In this paper, the effect of wood activated carbon and mineral activated carbon on the physicochemical properties of vegetation concrete is studied. The experimental results show that the activated carbon proportion in vegetation concrete is positively related to the porosity, permeability coefficient, water holding capacity, and nutrient content and retention ability, while it is negatively related to the dry density, water retention ability, cohesive force and internal friction angle. However, it should be noticed that when the proportion exceeds 2%, the average height, aboveground biomass and underground biomass of Cynodon dactylon decrease with increasing proportion of activated carbon. The effect of wood activated carbon is generally more remarkable than that of mineral activated carbon. In addition, according to the research results, the effect of activated carbon on vegetation concrete can last for at least half a year, although it does slowly deteriorate with increasing time. By comprehensive consideration of the current industry standard, previous research results and economical reasoning, the recommended type of activated carbon is wood, with a corresponding suitable proportion ranging between 1 and 2%.

Waste wood biomass as precursor for manufacturing activated carbon (AC) can provide a solution to ever increasing global water quality concerns. In our current work, Melia azedarach derived phosphoric acid-treated AC (MA-AC400) was manufactured at a laboratory scale. This novel MA-AC400 was tested for RO16 dye removal performance as a function of contact time, adsorbent dosage, pH, temperature and initial dye concentration in a batch scale arrangement. MA-AC400 was characterized via scanning electron microscopy, energy dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, dynamic light scattering (DLS) and fluorescence spectroscopy. MA-AC400 is characterized as mesoporous with BET surface area of 293.13 m 2 g -1 and average pore width of 20.33 Å. pH PZC and Boehm titration confirm the acidic surface charges with dominance of phenolic functional groups. The average DLS particle size of MA-AC400 was found in the narrow range of 0.12 to 0.30 µm and this polydispersity was confirmed with multiple excitation fluorescence wavelengths. MA-AC400 showed equilibrium adsorption efficiency of 97.8% for RO16 dye at its initial concentration of 30 mg L -1 and adsorbent dose of 1 g L -1 . Thermodynamic study endorsed the spontaneous, favorable, irreversible and exothermic process for RO16 adsorption onto MA-AC400. Equilibrium adsorption data was better explained by Langmuir with high goodness of fit (R 2 , 0.9964) and this fitness was endorsed with lower error functions. The kinetics data was found well fitted to pseudo-second order (PSO), and intra-particle diffusion kinetic models. Increasing diffusion constant values confirm the intraparticle diffusion at higher RO16 initial concentration and reverse was true for PSO chemisorption kinetics. MA-AC400 exhibited low desorption with studied eluents and its cost was calculated to be $8.36/kg.

Iron (Fe) dissimilatory reduction might impact chromium (Cr) mobility in the rice rhizosphere, but it is poorly understood. We assessed rhizosphere microbes' role in Cr immobilization and bioavailability by conducting the pot experiment to test different biochar sources (PMB - pig manure and PSB - pine sawdust) and phosphorus (P) levels impact on Cr mobility. Results showed that PMB application increased root biomass (23-65 %) and decreased root Cr concentration (46-74 %) regardless P treatment. However, P addition reduced root and shoot biomass in control and PMB treatments by 33-43 % and 25-26 %. Therefore, low P input is recommended in Cr-contaminated soil. Moreover, Geobacter was the key microbial groups which may be involved in promoting Cr release by increasing Fe dissolution. Finally, Geobacter and Fe dissimilatory reduction play a central role in Cr translocation and they should be considered in strategies to reduce rice Cr uptake by biochar application., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Biochar was prepared by mixing sewage sludge with sawdust via a co-pyrolysis with different mixture ratios and temperatures. The results showed that the sawdust addition resulted in a lower yield of biochar with higher C content. The total concentrations of Pb and Cd in biochar were reduced. Besides, pyrolysis can transform the potentially toxic Pb and Cd to stable fractions. However the sawdust addition had slight influence on the chemical forms of Pb and Cd in the biochar. The biochar with 50% sawdust at 600°C exhibited a remarkable reduction of the leachable metal concentrations. The possible transformation mechanisms of Pb and Cd were inferred as the formation of aluminum and silicon-containing minerals. These results provide insights into the influence of sawdust addition on the characteristics of biochar and the possible Pb and Cd immobilization mechanisms during co-pyrolysis process.

A woody-biochar was added to waste biomass during a composting process. The resulting compost-char was amended to a metal contaminated soil and two plant species, L. perenne and E. sativa, were grown in a pot experiment to determine 1) plant survival and stress factors, 2) uptake of metals to plants and, 3) chemical characteristics of sampled soils and pore waters. Compost supplemented with biochar after the composting process were also tested, as well as a commercially available compost, for comparison. Co-composting with biochar hastened the composting process, resulting in a composite material of reduced odour, increased maturity, circum-neutral pH and increased moisture retention than compost (increase by 3% of easily removable water content). When amended to the soil, CaCl 2 extractable and pore water metals s were reduced by all compost treatments with little influence of biochar addition at any tested dose. Plant growth success was promoted furthest by the addition of co-composted biochar to the test soil, especially in the case of E. sativa. For both tested plant species significant reductions in plant metal concentrations (e.g. 8-times for Zn) were achieved, against the control soil, by compost, regardless of biochar addition. The results of this study demonstrate that the addition of biochar into the composting process can hasten the stability of the resulting compost-char, with more favourable characteristics as a soil amendment/improver than compost alone. This appears achievable whilst also maintaining the provision of available nutrients to soils and the reduction of metal mobility, and improved conditions for plant establishment., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Concerns over the disposal of preservative-treated wood waste and its related environmental problems are the main driving forces of research into the recycling of preservative-treated wood. Preservative-treated wood waste composed of cellulose, hemicellulose, and lignin with several types of heavy metals can be recycled in various ways, such as wood-based composites, heavy metal extraction, energy recovery, etc. In particular, thermochemical conversion has attracted considerable attention recently because energy can be recovered from biomass as liquid fuel and bio-oil, as well as produce bio-char with a high carbon content, which can be applied to valuable products, such as soil amendment, adsorbents, solid fuels, and catalyst supports. On the other hand, environmental issues, such as heavy metal volatilization and heavy metal leaching, are still a challenge. This review reports the state-of-the-art knowledge of biochar production from preservative-treated wood with the main focus on the feedstock, process technology, biochar characteristics, application, and environmental issues. This review provides important information for future studies into the recycling of preservative-treated woods into biochar., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Highly toxic Cr(VI) poses huge threats to human health and ecosystem. This study utilized biochar obtained from apple wood which is favorable for the formation of high C content biochar for removing Cr(VI) from aqueous media. Cr(VI) removal was highly pH-dependent with the highest Cr(VI) removal efficiency (99.9%) at pH 2.0. Fourier-transform infrared spectroscopy (FTIR) results showed that the functionalities CO and CO on biochar were likely involved in Cr(VI) treatment. Results of X-ray photoelectron spectroscopy (XPS) analysis and X-ray absorption near-edge structure (XANES) spectra indicated that the majority of Cr exhibited as the reduced Cr(III) on the biochar. Confocal micro X-ray fluorescence (μ-XRF) maps confirmed the heterogeneous distribution of Cr on biochar. The electrostatic attraction, Cr(VI) reduction, Cr(III) complexation, and ion exchange likely accounted for the principal processes of Cr(VI) removal from water. These results showed that biochar can be an effective reactive medium for remediation of Cr(VI) in an aqueous solution. This study firstly integrated the Cr(VI) removal data with XANES and confocal μ-XRF mapping to obtain a deeper understanding of Cr speciation and distribution on biochar, which was critical for identifying the key role of functional groups and Cr(VI) removal mechanisms using apple wood biochar., (Copyright © 2019 Elsevier B.V. All rights reserved.)

For the pretreatment of wood, charcoal and collagen from bone micro samples using the Acid-Base-Acid (ABA) method, we have assembled an automated computer-controlled unit in our laboratory CRL. The sample is placed in a glass single-necked cuvette. The machine consists of prepared solutions which are guided through capillaries, switching valve and peristaltic pump into the cuvette with the sample according to the currently selected program. The automat can be used for the pretreatment of charcoal, wood and also collagen from bones., (© The Author(s) 2019. Published by Oxford University Press. All rights reserved. For Permissions, please email: journals.permissions@oup.com.)

In most resource-oriented sanitation (ROS) systems, the composting process has been a sustainable treatment method for source separated feces. Nonetheless, a slow and low degradation efficiency-combined with hygienic concerns, especially for the high amount of waste produced -makes the selection of the composting bulk additives a critical decision for the process. This study presents the efficiency improvement of adding different natural additives to enhance the composting process of the source separated feces in ROS systems. Three different natural additives, including sawdust, rice husk, and rice husk charcoal were utilized for the composting process of fresh feces with an additive w/w ratio of 2:1. To evaluate the impact of additives on compost properties, chemical, physical, and biological characteristics of composting materials were measured. Results indicated that using rice husk charcoal as an additive of the process was effective and generated a degradation of more than 40% of total organic carbon (TOC), reduced the nitrogen loss to less than 0.2%, and improved the germination index (GI) to more than 80%. Moreover, in terms of fecal indicators, the Escherichia coli (E. coli) stains were totally removed after five weeks. The efficacy of utilizing rice husk charcoal as a composting matrix in resource oriented sanitation systems can be, therefore, demonstrated as a nature-based treatment for source separated feces., (Copyright © 2019 Elsevier Inc. All rights reserved.)

This study aimed to investigate changes in metalaxyl-M sorption-desorption capacity of soil following the addition of two types of amendments. Two biochars (BC) from grapevine pruning residues (BC-G) and spruce wood (BC-S) and two vermicomposts (VC) obtained vermicomposting digestates from a mixture of manure and olive mill wastewater (VC-M) and buffalo manure (VC-B) were used. Using a batch equilibration method, the materials and a silt loam soil non-amended or amended with each material at 2% (w/w) were interacted with the fungicide at a concentration of 2 mg L -1 for kinetics study and in the range 1-20 mg L -1 for sorption isotherms. Kinetics results showed that metalaxyl-M onto the amendments and non-amended soil followed preferentially a pseudo-second-order model, thus indicating a chemisorption process. Sorption isotherm data of the product on BC and VC fitted well the Freundlich equation, whereas those on non-amended and amended soil followed preferentially a linear model. The K Fads values were 995.2, 788.5, 55.2, 52.1, 6.4, 6.0, 3.4, 2.6 and 1.5 L kg -1 for BC-G, BC-S, VC-M, VC-B, soil-BC-G, soil-BC-S, soil-VC-M, soil-VC-B and non-amended soil, respectively. Product desorption from each soil sample occurred to a lesser extent than sorption. Highly significant correlations (P < 0.005) were found between the values of sorption and desorption constants of all adsorbents and organic C content, thus confirming the prominent role of organic matter in the sorption process of metalaxyl-M.

Biochar is a stable carbonaceous by-product of pyrolysis and can be used for toxic metals (TMs) retention in polluted soil. Wheat (Triticum aestivum) was grown in three polluted soils collected from Chenzhou (CZ), Tongguan (TG) and Fengxian (FX), China. Wood biochar (WBC) was applied at 0, 0.5, 1.0 and 2.0% to each pot filled with 2 kg polluted soil. The results showed that WBC was efficient to alter soil pH and electrical conductivity (EC). The changes in soil pH and EC had a direct relationship with the immobilization and phytostabilization of TMs in the three soils. The bioavailable TMs (Zn, Pb, Cd, and Cu) were reduced in the soil after WBC amendments due to ion exchange, precipitates of metal-carbonates and metal-phosphates, and chemisorption on WBC surface. The reduction in the bioavailable TMs content also resulted in the diminution in TMs shoot uptake in wheat. Similarly, the TMs uptake in wheat root were also reduced as a result of WBC application. The reduction in bioavailable TMs and the release of essential nutrients and base cations from the WBC also increased the wheat shoot and root dry biomasses production. The application of WBC in polluted soil also improved soil health and the urease and β-glucosidase enzymes were also enhanced. The results concluded that WBC was efficient to reduce the bioavailability of TMs and shoot and root uptake, improved wheat dry biomasses production and soil enzymatic activities in industrial and smelter/mines polluted soils., (Copyright © 2019 Elsevier Inc. All rights reserved.)

Antibiotics and heavy metals are frequently detected simultaneously in water environment. Effective elimination methods for antibiotics and heavy metals pollution should deserve our attention. This study investigates the adsorption performance of biochar modified with nano-hydroxyapatite (nHAP) on tylosin (TYL) and Cu from water simultaneously. Composite adsorbents of nHAP and biomass, derived from three waste residues, which were wood-processing residues (WR), wheat straw (WS) and Chinese medicine residues (CMR), were prepared. According to the results of orthogonal experiment, the degree of influence of the three factors on TYL and Cu were the pyrolysis temperature > the proportion of nHAP and biomass > the sources of biomass, and pyrolysis temperature> the sources of biomass> the proportion of nHAP and biomass, respectively. The optimum conditions for nHAP@biochar were screened. At pH < 7.0, the adsorption quality of TYL increased with pH increased, while at pH > 7.0, the adsorption quality of TYL changed slightly. At low pH, Cu and TYL could compete for the same adsorption sites on nHAP@biochars. The adsorption amount of TYL and Cu were both increased with increasing of the temperature. Compared with Langmuir model, Freundlich model could better fit the TYL adsorption on nHAP@biochars, with K f values of TYL 62.35 (mmol/kg) (L/mmol) n (WR1) and 4.84 (mmol/kg) (L/mmol) n (CMR1), respectively., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

This study focused on evaluate the effectiveness of biochar alone compare integrated with bacterial consortium amendment on the gaseous emissions mitigation as well as carbon and nitrogen sequestration during pig manure composting. Six additive treatments were performed based on uniform mixing pig manure with wheat straw [bacterial consortium (T2), 12%wood biochar (T3), 12%wood biochar + bacterial consortium (T4), 12%wheat straw biochar (T5), 12%wheat straw biochar + bacterial consortium (T6), while T1 without any additive]. The results obviously indicated that integrated use of biochar and bacterial consortium could remarkably relieved gaseous emissions, improved carbon and nitrogen conservation as well as accelerated maturity of composting. Notably the optimum combination was existed in T6 owing to lowest nutrient losses (nitrogen and carbon losses were 9.91 g/kg and 189.54 g/kg) and gas emissions (30.16 g/kg) as well as supreme maturity (germination index > 100%); it's an economic-practical and environmental protection novel disposal approach for solid waste., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

The study highlights one pot conversion of hardwood biomass into Total reducing sugars (TRS) and 5-Hydroxymethyl Furfural (5-HMF). Synergistic effect of dilute H 2 SO 4 and ionic liquid in a reaction time of 60 min at 120 °C was examined. Hydrolysis of Catalpa (Catalpa Bignonioides), Indian Rosewood (Dalbergia Sissoo), Chinaberry (Melia Azedarach) and Babool (Acacia Nilotica) catalyzed by modified activated carbon leads to significant product yield. Maximum yield was obtained using Catalpa wood i.e. 92.67% TRS and 70.36% 5-HMF under optimized conditions. Biomass before and after pretreatment subjected to FT-IR, XRD and compositional analysis determined the structural changes. Further, the effect of electrolytes namely; AlCl 3 , MgCl 2 , NaCl and KCl were evaluated. Results revealed that using optimized concentration of each electrolyte promoted the conversion to 96.56% (TRS) and 86.23% (5-HMF) using AlCl 3 (4 wt%) for Catalpa wood. Addition of DMSO with optimized electrolyte concentration improves the partition coefficient (3.3) and yield to 88.29% (5-HMF)., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Activated carbon (AC) with high specific surface area was prepared by using bifunctional H 3 PO 4 agent, which led to dehydrating and activation effects through hydrothermal pretreatment and subsequent pyrolysis process. N 2 adsorption and desorption isotherms of AC showed a high BET surface area of 2434 m 2  g -1 and a total volume of pores (V T ) of 2.0447 m 3  g -1 for AC. The morphology and the chemical components of hydrochar and AC were characterized by scanning electron microscopy and Fourier transform infrared spectroscopy, which indicated that H 3 PO 4 was benefitting for the formation of porous structure of AC. Subsequently, the effect of H 3 PO 4 in hydrothermal pretreatment and activation process was investigated by comparative experiments. The removal and adsorption of methylene blue (MB) dye with different concentrations onto the AC were studied. The monolayer equilibrium adsorption capacity was 644 mg g -1 , showing that AC has good adsorption qualities for methylene blue (MB). The adsorption balance data of MB on AC was best fitted to the Redlich-Peterson model. The adsorption kinetic data fit better to the pseudo-first-order model at low MB concentration, and the pseudo-second-order and Elovich models fit better when the MB concentration was rising.

For the first time, a biomass-derived porous carbon cathode (WDC) was fabricated via a facile one-step pyrolysis of recovered wood-waste without any post-treatment. The WDC along with pyrophosphate (PP) as electrolyte were used in electro-Fenton (EF) at pH 8 for sulfathiazole (STZ) treatment. The H 2 O 2 accumulation capacity of WDC was optimized via the following parameters: pyrolysis temperature, applied current and electrolyte. Results showed that the WDC cathode prepared at 900 °C achieved the highest H 2 O 2 accumulation (13.80 mg L -1 in 3 h) due to its larger electroactive surface area (28.81 cm 2 ). Interestingly, it was found that PP decreased the decomposition rate of H 2 O 2 in solution as compared to conventional electrolyte, which resulted in higher H 2 O 2 accumulation. PP allowed operating EF at pH of 8 due to the formation of Fe 2+ -PP complexes in solution. Moreover, Fe 2+ -PP was able to activate oxygen to produce OH. In this way, the degradation of STZ took place through four main pathways: 1) via OH from the Fe 2+ -PP complex, 2) via OH from EF reactions, 3) via surface OH at the boron doped diamond electrode (BDD) and 4) via SO 4 - from BDD activation. Finally, microtox tests revealed that some toxic intermediates were generated during WDC/BDD/PP EF treatment, but they were removed at the end of the process., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Wood-based biochar, as a metal-free heterogeneous activator of peroxydisulfate (PDS), was successfully prepared by pyrolysis of polar sawdust for efficient removal of Acid Orange 7 (AO7). The results demonstrate PDS could be effectively activated by wood-based biochar, and AO7 was rapidly eliminated in a wide range of pH value (3.0-10.0) with AO7 removal achieved ≥ 99.3% after 14 min reaction. The dominant reactive species in the biochar/PDS system were verified via radical quenching tests and electron paramagnetic resonance (EPR) technique. It is speculated that sulfate radicals (SO 4 •- ) and hydroxyl radicals ( • OH) were formed on the surface of biochar. Based on the results of X-ray photoelectron spectroscopy (XPS), π-electron density and oxygen-containing functional groups (especially C-OH) on biochar surface were active centers for the catalytic reaction. Recycle experiments of biochar for 4 runs were carried out and the regeneration method of the catalyst was also studied., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Biochar is a promising material for facilitating the reclamation of oil sands process water (OSPW); however, how biochar properties can be optimized for metal removal from OSPW is not well studied. This study was conducted to determine relationships among feedstock type, pyrolysis condition, biochar property, and lead(II) adsorption capacity to demonstrate the potential use of biochar for metal removal from a synthetic OSPW. Sawdust, canola and wheat straw, and manure pellet were pyrolyzed at 300, 500, and 700 °C, with or without steam activation. Increasing pyrolysis temperature increased, with a few exceptions, biochar pH, surface area, and carbon content, but decreased hydrogen and oxygen contents and surface functional groups. Steam activation increased surface area but did not affect other properties. For non-steam-activated biochars, canola and wheat straw biochars produced at 700 °C had the highest lead(II) adsorption capacity (Q max&#95;Pb ), at 108 and 109 mg g -1 , respectively. Increasing the pyrolysis temperature increased Q max&#95;Pb due to increased biochar pH, ash content, and surface area by increasing precipitation, ion exchange, and inner-sphere complexation of lead(II). Steam activation increased lead(II) adsorption capacity for most biochars mainly due to the increased surface area, with the highest Q max&#95;Pb at 195 mg g -1 for canola straw biochar pyrolyzed at 700 °C with steam activation. The adsorption with time followed a pseudo-second order kinetic model. The results of this study will help select most effective biochars that can be produced from locally available agricultural or forestry byproducts that are optimized for metal removal from synthetic OSPW., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Dye-based industries, particularly small and medium scale, discharge their effluents into waterways without treatment due to cost considerations. We investigated the use of biochars produced from the woody tree Gliricidia sepium at 300 °C (GBC300) and 500 °C (GBC500) in the laboratory and at 700 °C from a dendro bioenergy industry (GBC700), to evaluate their potential for sorption of crystal violet (CV) dye. Experiments were conducted to assess the effect of pH reaction time and CV loading on the adsorption process. The equilibrium adsorption capacity was higher with GBC700 (7.9 mg g -1 ) than GBC500 (4.9 mg g -1 ) and GBC300 (4.4 mg g -1 ), at pH 8. The CV sorption process was dependent on the pH, surface area and pore volume of biochar (GBC). Both Freundlich and Hill isotherm models fitted best to the equilibrium isotherm data suggesting cooperative interactions via physisorption and chemisorption mechanisms for CV sorption. The highest Hill sorption capacity of 125.5 mg g -1 was given by GBC700 at pH 8. Kinetic data followed the pseudo-second-order model, suggesting that the sorption process is more inclined toward the chemisorption mechanism. Pore diffusion, π-π electron donor-acceptor interaction and H-bonding were postulated to be involved in physisorption, whereas electrostatic interactions of protonated amine group of CV and negatively charged GBC surface led to a chemisorption type of adsorption. Overall, GBC produced as a by-product of the dendro industry could be a promising remedy for CV removal from an aqueous environment.

The recovery of phosphate from human urine has been considered as one of the most attractive benefits of urine source separation because P is an essential but limited macronutrient. This study investigated the approach to modify wood waste biochar via metal oxides aiming to recover phosphate from human urine to produce a value-added biochar. Results showed the phosphate removal ability was enhanced for the modified biochar pre-treated in modification solutions of MgCl 2 , AlCl 3 , CaCl 2 and FeCl 3 , respectively, while natural biochar released phosphate to urine. Among the tested biochar, Mg-biochar presented the best capacity for phosphate removal from the hydrolyzed urine, reaching 118 mg P  g -1 at a MgCl 2 concentration of 2.3 M. However, higher MgCl 2 concentration would not further increase the adsorption capacity. Fitting of the adsorption kinetics and isotherms indicated that the phosphate removal process was probably controlled by multiple mechanisms. Both the experimental and fitting results confirmed that the content of Mg oxides was the key factor determining the adsorption rate and capacity of phosphate on Mg-biochar. pH ranges of 7-9 and the ammonium concentration higher than 108 mg N  L -1 enhanced the phosphate adsorption capacity. As such, the Mg-biochar was more favored for the treatment of hydrolyzed urine rather than fresh urine with acidic pH and lower concentration of ammonium. Further calculations were carried out using the Langmuir model to evaluate the removal of phosphate and the product. Results indicate that it is an effective technique to use Mg-biochar for phosphate removal from hydrolyzed urine and it yields phosphate-enriched biochar products.

The removal of phosphorus (P) from sewage effluents is necessary to control eutrophication in receiving waters. Biochar has been proposed and is investigated for the capture and reuse of P, however the forces driving and limiting P adsorption are still largely unclear. To identify the forces governing P uptake by biochar, biochars with markedly different physicochemical characteristics derived from a variety of biomass (oilseed rape straw, wheat straw, miscanthus straw, rice husk, soft wood and sewage sludge residue), pyrolysed at various temperatures, were investigated. The biochar samples were characterised in terms of pH, electrical conductivity, total acidity, carbon chemistry, metal composition, surface area , and porosity, and the uptake and release of P was compared to the biochar properties using multivariate analysis. Uptake of P by the biochars as such was low (< 0.71 mg P/g biochar with feed solutions of 50 mg P/l) and, among the variables studied, the biochars' Ca and Mg content was key in P removal and found to be pH dependant. Enhancement of biochar surface area and porosity was carried out by activation with CO 2 at 800 °C and the uptake significantly improved (p < 0.05) (i.e. an increased surface area from <20 m 2 /g up to 781 m 2 /g gave a limited improvement in P removal to <1.2 mg P/g biochar at feed level of 50 mg P/l). These results confirm that the potential to use these unmodified biochars derived from a variety of biomass for P sorption is low, but that the material provides properties that may be modified or enhanced to increase sorption capacity. This study indicates that biochar/biochar feedstock with greater content of Ca and Mg will be more advantageous for P capture., (Copyright © 2019 Elsevier B.V. All rights reserved.)

Selection of an appropriate biochar as a soil amendment requires a thorough investigation of the effects on soil ecosystems and adjacent water systems via leaching. Different biochar characteristics influence retention or leaching of different soil and biochar components. A lab lysimeter study was conducted to investigate carbon (C) balance and leachate quality with biochar additions. Biochar made from wood pellets (WP) and sewage sludge (SS) produced at 400 °C (WP400 and SS400) and 700 °C (WP700 and SS700), respectively, were applied to silt loam soil at an application rate of 4%. Fluorescence excitation-emission spectrophotometry (EEMs) was utilized to understand the compositional changes in leachate dissolved organic carbon (DOC). Our results show that DOC contributed the largest portion of C leaching loss. The WP treatments increased DOC mass loss, but did not significantly change leachate DOC quality. SS400, in comparison, increased mass loss of DOC and SS700 decreased it probably due to its higher adsorptive capacity to DOC. Unlike WP treatments, SS treatments significantly changed leachate DOC quality. Chemical oxygen demand (COD) was reduced with SS400 and SS700 biochar additions, which is assumed to be related to SS biochar's high oxygen-containing surface functional groups. Reduction in total nitrogen (TN) leaching by WP700 and SS700 treatments might be related to the higher micropore surface area. Over all, our findings imply that changes in the different components of the leachate from biochar-amended soil are related to different biochar properties, such as labile matter content, total surface area, micropore volume and cation exchange capacity., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Biochar as a carbon-rich highly porous substance has been proposed for use in agriculture and horticulture as a soil amendment. One of the main concerns of this application of biochar is its potential contamination with heavy metals (HMs) and polycyclic aromatic hydrocarbons. The aim of this research was to access the environmental risk of biochar used as a soil amendment on soil mesofauna (mites and springtails). We conducted both field and laboratory experiments with the use of wood-chip biochar from low-temperature (300 °C) flash pyrolysis. Biochar was free from polycyclic aromatic hydrocarbons (PAH), and the concentration of all tested toxic compounds was very low or even under the level of detection. Both the results of field and laboratory studies show no toxic effects on soil mesofauna. In the field studies, the biochar application of 50 t/ha in maize and oilseed rape crops significantly increased the mean number of mesofauna. This change probably resulted from improved soil chemical properties (in particular organic carbon content and cation exchange capacity) upon biochar addition. The results of the avoidance test with the use of springtail species Folsomia candida showed the possible short-term toxicity risk from a dose of 5%. The results of the reproduction test indicate the negative response of F. candida from the rate of 25% (higher than the field dose, which corresponds to 10% in laboratory tests). The reason for the short-term toxicity might be the considerable increase in soil pH after biochar addition. To our knowledge, this is the first study that has looked so widely into the effect of biochar on soil mesofauna. We encourage further studies into the risk assessment of biochar on soil organisms in both a controlled laboratory environment and in the open field.

The present work studied to evaluate the effectiveness under the interaction of bacterial consortium and biochar applied to give impetus to bacterial community activities among cow manure composting. High-throughput sequencing technique and six treatments were carried out: T2, T3 and T6 were single apply of bacteria culture (C), 12%wood biochar (12%WB) and 12%wheat straw biochar (12%WSB), respectively, while T4 and T5 were bacterial consortium combined with 12%WB and 12%WSB respectively, and T1 was used as control. The conclusion shows that the richness of bacterial community were most prosperity in T5 and T4 that in line with the statistical analysis angle of curves and cluster. The dominate phyla of Firmicutes, Proteobacteria and Bacteroidetes were accounted to 31.36%, 34.79% and 33.85%, the superior genera were Dysgonomonas (16.55%), Empedobater (9.39%), Atopostipes (13.42%), Tissierella (8.25%), Marinimicrobium (14.45%) and Pseudomonas (9%). Overall, bacterial consortium combined with biochar could stimulate microbe activity to accelerate degradation, enhance richness and alter specific selection of bacterial community., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Recently, hydrochar (HC) with existed persistent free radicals (PFRs) has attracted researches' attention for the potential application in heterogeneous Fenton-like reactions, but studies on the interactive effects of H 2 O 2 , iron, and HC in removal of organic pollutants are still limited. In this paper, magnetic iron (hydr)oxides immobilized hydrochar composite (Fe/HC) derived from hydrothermal carbon (HTC) of pinewood were synthesized and characterized. The interactive effects of H 2 O 2 , iron, and HC in the removal of several estrogens were systematically investigated to understand the removal performance and related mechanism, especially at a pH range close to natural water environment. Batch experiments results showed that estrogens could be efficiently removed over Fe/HC material under a wide pH range of 4-9. Based on the analysis of electron spin resonance, X-ray photoelectron spectroscopy, Mössbauer spectroscopy, and electrochemical impedance spectroscopy, mechanism study indicated that the carbon-centered PFRs on the surface of hydrochar can act as electron donors, and transfer the electrons on adsorbed O 2 to generate O 2 - rapidly, while the addition of H 2 O 2 enhanced the transmission ability of electron to produce OH (ads) on the material surface. The iron and hydrochar components contributed to the desirable removal of estrogens via the synergistic effect between catalysis and adsorption. This study provides a promising application for the use of Fe/HC materials on remediation of pollution with trace estrogens in water environment., (Copyright © 2018 Elsevier B.V. All rights reserved.)

Surface modification may lead activated carbon (AC) to take on different properties. This study aimed to promote surface modification of activated carbons using corona treatment (electrical discharge). In this study, powdered commercial activated carbon was used. Activated carbons were subjected to corona treatment at different exposure times (2, 5, 8 and 10 min) at 4.5 cm height from the source. To observe differences promoted by treatment, activated carbons were analyzed by acidity, surface functional groups, Fourier Transform Infrared Spectroscopy (FTIR), elemental analysis (CHN), proximate analysis and thermogravimetry. Corona treatment impacted surface chemistry of activated carbons. There was a trend of increasing surface acidity according to exposure time. There were changes in functional groups, increasing carboxyl acid and decreasing lactone and phenol groups. FTIR analysis showed peaks in the bands at 3500, 1650 and 1300 cm-1. Increase of oxygen content and decrease of carbon content were also found. Immediate analysis followed similar tendency for volatile and fixed carbon content. There were also differences in thermogravimetry analysis. Treated activated carbons were different compared to virgin activated carbon. This difference was performed by surface oxidation. Thus, this study showed that corona treatment caused surface modifications and might impact adsorption process.