Search

Risk assessment and technical feasibility of brick formation from exhausted paper mill sludge derived biochar obtained after its use as an adsorbent for the treatment of effluent containing pentachlorophenol was studied. The bricks were prepared by geopolymerization mechanism in presence of sodium hydroxide, and the extent of geopolymerization was determined on the basis of crystal structure, surface functionalities, and surface morphology of the bricks. The preparation parameters (sodium hydroxide dosage, initial water and calcium carbonate content and curing temperature) were optimized and the results were analyzed in terms of compressive strength, water absorption, and abrasion index. Risk assessment of heavy metals was performed to determine the contamination level and overall hazard index of the biochar-based geopolymer bricks. Hazard quotient and hazard index were calculated to assess the overall non-carcinogenic risk posed by selected heavy metals via ingestion and dermal contact. The leaching potential of heavy metal and pentachlorophenol from the biochar-based geopolymer bricks was also determined. The results showed that the biochar-based geopolymer bricks showed good mechanical properties and the concentration of heavy metals in the leachate falls within the permissible limits prescribed by Indian Standards for Industrial and Sewage Effluents Discharge (inland surface water).

The polycyclic aromatic hydrocarbons (PAHs) toxicity and sorption behaviour of biochars prepared from pyrolysis of paper mill effluent treatment plant (ETP) sludge in temperature range 200-700 °C was studied. The sorption behaviour was found to depend on the degree of carbonization where the fractions of carbonized and uncarbonized organic content in the biochar act as an adsorption media and partition media, respectively. The sorption and partition fractions were quantified by isotherm separation method and isotherm parameters were correlated with biochar properties (aromaticity, polarity, surface area, pore volume and ash content). The risk assessment for the 16 priority EPA PAHs present in the biochar matrix was performed and it was found that the concentrations of the PAHs in the biochar were within the permissible limits prescribed by US EPA (except BC400 and BC500 for high molecular weight PAHs)., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The zero-valent iron magnetic biochar composites (ZVI-MBC) were synthesized from the paper mill sludge biochar and used for the treatment of the synthetic and real effluent containing pentachlorophenol (PCP). During the synthesis of ZVI-MBC, NaBH4 was used as the reducing agent to reduce Fe(II) to Fe(0) and cetyltrimethylammonium bromide was added as surfactant. The effect of the molar ratio of FeSO4 to NaBH4, dose of the surfactant and the ZVI to biochar ratio on the PCP removal efficiency was investigated. It was found that the ZVI-MBC combines the advantages of biochar and ZVI particles for the simultaneous adsorption and dechlorination of PCP in the effluent and the complete removal of PCP was obtained. The ageing tests showed that biochar prevents the formation of oxide film on the ZVI particles and leaching tests confirmed the stability of ZVI on biochar matrix as very low iron leaching was noticed., (Copyright © 2014 Elsevier Ltd. All rights reserved.)

The risk analysis was performed to study the bioavailability and eco-toxicity of heavy metals in biochar obtained from pyrolysis of sludge of pulp and paper mill effluent treatment plant. The sludge was pyrolyzed at different temperatures (200-700°C) and the resultant biochar were analyzed for fractionation of heavy metals by sequential extraction procedure. It was observed that all the heavy metals get enriched in biochar matrix after pyrolysis, but the bioavailability and eco-toxicity of the heavy metals in biochar were significantly reduced as the mobile and bioavailable heavy metal fractions were transformed into the relatively stable fractions. Moreover, it was observed that the leaching potential of heavy metals decreased after pyrolysis and the best results were obtained for biochar pyrolyzed at 700°C., (Copyright © 2014 Elsevier Ltd. All rights reserved.)