Search

Areca nut husk (ANH) holds promise as a viable biomass source for xylose production. Xylose is a precursor for various biochemicals. However, the recalcitrant nature of ANH makes saccharification more complex. To address this, lime and acid pretreatments were carried out to enhance the susceptibility of biomass to saccharification. Before this, a compositional analysis was conducted to determine the initial constituents of the feedstock. Saccharification was conducted under the following conditions: 2% (wV−1) substrate loading, 100 rpm agitation, and 30 °C hydrolysis temperature for 12 h hydrolysis time at pH 4.5 to 5.0. However, parameters like xylanase enzyme loading were varied to enhance the saccharification of the ANH. The results demonstrated that acid‐treated husk (ATH), lime‐treated husk (LTH), and raw husk (RH) achieved the highest yield (gg−1) of reducing sugar, approximately 90, 83, and 15%, respectively, at an enzyme loading of 15.0 IUg−1. Various analytical techniques, including Raman spectroscopy, Fourier transform infrared spectroscopy (FTIR), zeta potential, thermogravimetric analysis (TGA), X‐ray diffraction (XRD), and field emission scanning electron microscopy (FESEM) were used to examine structural changes in the native, pretreated, and saccharified residues of ANH. The analysis revealed that a significant amount of partial crystalline and amorphous cellulose in the ANH biomass was hydrolyzed during the saccharification process. However, saccharification also led to the removal of amorphous substances, disruption of the crystalline structure, and conversion of crystalline regions into amorphous domains. [ABSTRACT FROM AUTHOR]

Copyright of Journal of Natural Fibers is the property of Taylor & Francis Ltd and its content may not be copied or emailed to multiple sites or posted to a listserv without the copyright holder's express written permission. However, users may print, download, or email articles for individual use. This abstract may be abridged. No warranty is given about the accuracy of the copy. Users should refer to the original published version of the material for the full abstract. (Copyright applies to all Abstracts.)

Abstract: The lignocellulosic materials are cheap and readily available either in the form of agricultural waste or forest residues. These materials can be used as a source for energy production either in the gaseous form (CO, H2 etc) or in liquid form (ethanol, butanol etc) to meet the rising demand of energy. The reign of lignocellulosic materials for energy production is a proven fact in this era of energy research. The present study focuses on characterization of three biomass samples namely areca nut husk (Areca catheu), moj (Albizia lucida) and bonbogori (Ziziphus rugosa), available in the region of North-East India. Physical and chemical analysis of these lignocellulosic biomass samples were performed using X-ray diffraction techniques, thermogravimetric analysis, FTIR, Raman spectroscopy and CHNSO analysis. Maximum crystalinity was observed in areca nut husk fiber (63.84%) followed by moj (46.43%) and bonbogori (42.46%). The calorific values of all the biomasses were found within the range of 17 MJ/kg to 22 MJ/kg. All these properties combined together per se shows that areca nut husk, bonbogori and moj are potential sources for biofuel production. [Copyright &y& Elsevier]