Search

The article presents the possibilities of effective management of lignocellulosic waste by including it in the circular economy. The pyrolysis process was chosen as the thermal conversion method. This approach, due to a high flexibility of the obtained products, better quality of the solid residue (char), and the lower emission of pollutants into the atmosphere, e.g., SO2 and NOx, is a competitive solution compared to combustion process. Wood waste from alder and pine were analyzed. As part of laboratory tests, the elementary composition was determined, i.e., C, H, N, S, and O. The pyrolysis process was carried out at a temperature of 600 °C on an experimental stand for the conversion of solid fuels in a stationary bed. For the obtained data, using the Ansys Chemkin-Pro calculation tool, the detailed chemical composition of gaseous products of the pyrolysis process was modeled for a varying temperature range and residence time in the reactor. The studies have shown that for certain process conditions it is possible to obtain a high calorific value of pyrolytic gas, up to 25 MJ/m3. [ABSTRACT FROM AUTHOR]

[Display omitted] • A study of oat straw pyrolysis was performed at various temperatures. • Multifaceted analysis of gas, liquid and solid phases was carried out. • Pyrolytic gas quality increased with temperature. • Chemkin modelling of pyrolysis allowed to predict chemical composition of syngas. Biomass wastes are sustainable, renewable, and promising energy sources. In this study, the pyrolysis of agricultural biomass was investigated to determine the most promising process parameters for pyrolytic gas production. The pyrolysis investigations were carried out under nitrogen atmosphere at 300, 400, 500, and 600 °C on the microscale using simultaneous thermal analysis and a laboratory-scale semi-batch vertical reactor. The solid, liquid, and gaseous products were characterised in detail, including the elemental and chemical composition. The gas and liquid products analyses were provided. It was found that the quality of the pyrolytic gas increased with temperature, both in terms of the pyrolytic gas yield and concentration of gaseous components (hydrogen and methane), whereas the carbon dioxide concentration decreased with temperature. The condensed vapours were rich in phenolic and aromatic compounds, and it was noted that the acetic acid concentration increased with temperature. The chemical functional groups in the char were determined using infrared spectroscopy. The carbon content increased with temperature, whereas the hydrogen content decreased. Further decomposition of the organic matrix was observed with increasing temperature. Additionally, chemical modelling of pyrolytic gas was performed using Ansys Chemkin-Pro software and compared with the experimental results. The computational results showed a good correlation with the measured pyrolytic gas composition, especially in the case of the major gas components. [ABSTRACT FROM AUTHOR]