Search

Graphical abstract Highlights • New mechanistic kinetic model proposed for NO x photocatalytic oxidation. • Intrinsic kinetic parameters for NO x removal determined in the ISO 22197-1 reactor. • Radiation homogeneity validated by numerical simulation. • Plug flow hypothesis confirmed by computational fluid dynamics simulation. • Successful model validation with prediction errors in the conversion below 13%. Abstract An air purification reactor working under the standard ISO 22197-1 is studied and used for the determination of the intrinsic kinetic parameters of the NOx photocatalytic removal. A new mechanistic kinetic model considering explicitly the radiation step is proposed. The derived reaction rate expressions for NO and NO 2 include the dependence on the concentration of NO, NO 2 and the local superficial rate of photon absorption. The air purification reactor was modelled using a numerical simulation methodology to validate homogeneity of the light distribution reaching the catalyst surface and go deep in the knowledge of fluid dynamic behaviour. Based on these results, general guidelines of the reactor behaviour working under the ISO 22197-1 standard can be stablished, being the first time that this reactor is modelled with a global predictive approach. Radiation intensity over the catalyst surface was confirmed to reach the specified value of 10 ± 0.5 W m−2. Plug flow can be applied in the studied reactor with an axial dispersion module lower than 0.001. However, the diffusion of chemical species in the reactor was also studied, as well as the impact of mass transfer phenomena on the accuracy of the calculated kinetic parameters. A comprehensive simulation model of the ISO reactor, including fluid dynamics, radiation, photochemical reaction and mass transfer was developed. The simulation results confirm that the kinetic parameters obtained without considering mass transfer limitation fail to reproduce the experimental data, whereas a global error lower than a 17% was achieved including the diffusion of the species in the reactor. The proposed methodology, experimentally validated, could be successfully applied to the prediction of the performance of different type of photocatalytic reactors or even open systems for NOx pollutants. [ABSTRACT FROM AUTHOR]

• Enhanced radiation transport model validated in commonly used photoreactors. • Isotropic, parallel and cone-shaped emission tested, representing common UV sources. • Increase of precision reached for sun direct light simulations. • Great improvement in LEDs simulations, from finer cone radiation and power cosine. This work presents the enhanced numerical simulation of the radiation transport in three different types of photocatalytic reactor using a novel Discrete Ordinate Method model recently developed for the open-source Computational Fluid Dynamics (CFD) platform OpenFOAM. The photoreactors represent commonly used geometries and illumination sources in the field of heterogeneous photocatalysis: an annular reactor illuminated by a mercury fluorescent lamp, a tubular reactor coupled to a compound parabolic collector illuminated by sunlight, and a tubular reactor illuminated by LEDs. Simulations were carried out for different photocatalyst concentrations, considering absorption and anisotropic scattering, showing differences smaller than 2.4% with respect to the results obtained by commercial CFD software for systems with isotropic emission, such as fluorescent lamps. Moreover, the model was able to improve the simulation of solar reactors and dramatically outperformed the simulation of LED sources, due to the combined effect of quadrature rotation and cone-limit fitting for cone-shaped sources, as well as a LED-specific power-cosine light distribution. The developed model has been thoroughly validated and is now available to the open-source CFD community. It allows a comprehensive numerical simulation of radiation transport using any type of light source, with applications in numerous engineering fields where optical phenomena affect the performance of the process. [ABSTRACT FROM AUTHOR]