Search

• Domain switching and lattice strain in polycrystalline K 0.5 Bi 0.5 TiO 3 -BiFeO 3 -PbTiO 3 is evaluated by in-situ high energy synchrotron XRD. • The tetragonal {200} grain family exhibited the highest effective lattice strain up to 8.2 × 10−3 at an electric field of 5 kV/mm. • A partial phase transformation from tetragonal to rhombohedral occurred at high electric field levels, with an average strain of −1.54 × 10−3. • Relaxation of intergranular stress gives rise to enhanced domain switching in KBT-BF-PT ceramics. • The observed self-adapting mechanism could also be exploited in other high performance, high temperature piezoelectric ceramics. We report an in-situ synchrotron X-ray diffraction study of K 0.5 Bi 0.5 TiO 3 -BiFeO 3 -PbTiO 3 ceramics, which exhibit a T c of around 450 °C. The electromechanical actuation mechanisms comprise contributions from coexisting tetragonal and rhombohedral phases. The tetragonal {200} grain family exhibited the highest effective lattice strain, up to 8.2 × 10−3 at 5 kV/mm. Strong strain anisotropy in the tetragonal phase and field-induced intergranular stresses facilitate a partial transformation from tetragonal (high strain anisotropy) to rhombohedral (low strain anisotropy) at high electric field levels, with an average linear transformation strain of -1.54 × 10-3. The domain switching behavior was effectively enhanced in both tetragonal and rhombohedral phases after the phase transformation, due to the release of intergranular stress. This observed self-adapting mechanism in tuning intergranular stress through partial phase switching in the morphotropic KBT-BF-PT composition with large lattice distortion could also be exploited in other perovskite systems in order to achieve high performance high temperature piezoelectric ceramics. [ABSTRACT FROM AUTHOR]

The structures and functional properties of Na0.5Bi0.5TiO3- xKNbO3 (NBT-xKN) solid solutions, with x in the range from 0.01 to 0.09, were investigated using a combination of high-resolution synchrotron X-ray powder diffraction (SXPD) and ferroelectric property measurements. For low KN contents, an irreversible transformation from cubic to rhombohedral phases was observed after the application of a high electric field, indicating that the polar nanoregions (PNRs) in the unpoled state can be transformed into metastable long-range ordered ferroelectric domains in the poled state. In contrast, the near-cubic phase of the unpoled ceramics was found to be remarkably stable and was retained on cooling to a temperature of −175°C. Upon heating, the field-induced metastable ferroelectric rhombohedral phase transformed back to the nanopolar cubic state at the structural transformation temperature, TST, which was determined as approximately 225°C and 125°C for KN contents of 3% and 5% respectively. For the field-induced rhombohedral phase in the poled specimens, the pseudo-cubic lattice parameter, ap, exhibited an anomalous reduction while the inter-axial angle increased towards a value of 90° on heating, resulting in an overall increase in volume. The observed structural changes were correlated with the results of temperature-dependent dielectric, ferroelectric and depolarization measurements, enabling the construction of a phase diagram to define the stable regions of the different ferroelectric phases as a function of composition and temperature. [ABSTRACT FROM AUTHOR]