Search

The ferroelectric solid solutions described by a general formula 0.98Pb(Zr1-xTix)O3 – 0.02La(Fe3+0.5, Nb5+0.5)O3 have been obtained by solid state reaction technique, where x assumes the following values: 0.42, 0.48 and 0.58. The structure of these ferroelectric compositions has been investigated in detail using X-ray diffraction analysis (XRD) and Scanning Electron Microscopy (SEM). The results obtained by XRD have evidenced that all obtained samples have a perovskite structure. The influence of the sintering temperature on the degree of incorporation of the elements in the solid solution have been studied too. The dielectric and piezoelectric constants have been determined and the influence of temperature on obtained values are presented and discussed. The performed experimental results have pointed out that the materials are characterized by a high anisotropy. Furthermore, the obtained values of the electromechanical coupling factor (kp) is situated between 0.40÷0.65 depending on the composition and the sintering temperature too.

The influence of the sintering temperature on the structure and on the hysteresis loops of Fe3+ doped Pb(ZrxTi1-x)O3 system has been investigated. Three compositions have been selected in the following mode: one in rhombohedral region, one in MPB region and one in tetragonal region have been obtained by solid state reaction technique. Sintering has been carried out at 12000C and 12500C respectively. The nature of the phases has been investigated in detail using X-ray diffraction analysis (XRD). All the sintered samples reveal a perovskite type structure. The surfaces have been lapped and metalized in order to obtaine the hysteresis loops at room temperature. The results showed a similar behaviour with “hard” PZT ceramics.

In this paper, some compositions described by the general formula Pb(ZrxTi1-x)0.99Fe0.01O3 have been considered and investigated. The compositions considered have been obtained by solid state reaction technique, where x corresponds to 0.42, 0.52 and 0.58. Sintering has been performed for 2 hours at temperatures between 1100oC and 1250oC. The influence of the sintering temperature on the microstructure and on the hysteresis loops of Fe3+ doped Pb(ZrxTi1-x)O3 system has been investigated. The crystallographic phase and microstucture of the sintered compositions have been studied in detail using X-ray diffraction analysis (XRD) and Scanning Electron Microscopy (SEM). The experimental results obtained by XRD have revealed that all the sintered samples have a perovskite structure. In order to correlate the behavior of the sintered materials to their microscopic structure, the domain structures have been defined by SEM. The dielectric properties, as relative dielectric permittivity (εr) and dielectric loss (tan δ) have been measured. The hysteresis loops at room temperature of all un-poled sintered compositions reveal a similar behaviour with “hard” PZT ceramics. The piezoelectric properties like electromechanical coupling factor (kp) have been investigated after polarization.

0.88Pb(Zr0.52Ti0.48)O3 – 0.12Pb(Mn1/3Sb2/3)O3 – 0,02 at%E piezoelectric ceramics, with E = Pr3+ were synthesized by using a conventional method, namely a solid state reaction technique. X-ray diffraction (XRD) and Scanning Electron Microscopy (SEM) were employed for the structural and microstructural investigations. Piezoelectric methods were used for the dielectric and piezoelectric properties determination. The results of XRD show a perovskite structure and XRD patterns, indexing on a tetragonal cell structure, was carried out for the most common phases. The SEM micrographs of the sintered compositions reveal a homogenous structure with a sharp or rounded grain boundary. The modified PZT ceramic presents still superior piezoelectric properties. Based on the results obtained, one can conclude that the analysed piezoelectric ceramics are useful for device applications.