Search

The success of ordinary Portland cement (OPC) comes at a risk to the environment because of the large carbon dioxide emissions associated with cement manufacturing. This has led the scientific community to look for alternative cementitious materials with lower environmental impact. Alkali activated cement (AAC) is an excellent alternative to this end. In this study, the effect of binder content, alkaline solid to binder ratio (AS/B), sodium silicate to sodium hydroxide solids ratio (SS/SH), and total water content to total solid binder ratio (TW/TB) on the strength, setting time and flowability of ambient cured AAC mixtures are studied using Taguchi method of experimental design. Binder content was varied from 550 to 750 kg/m3, AS/B ratio from 0.14 to 0.22, SS/SH ratio from 1.5 to 2.5, and TW/TB ratio from 0.29 to 0.39. The study results showed that within the investigated range, an increase in binder content has a minor effect on strength but resulted in a considerable increase in setting time and flowability. An increase in the AS/B ratio resulted in increased flowability and setting time and a decrease in strength. Moreover, the study also investigated the relationship between compressive strength and flexural strength. [ABSTRACT FROM AUTHOR]

Bond behaviour plays an important role in the design and performance of reinforced-concrete structures. In this study, finite-element modelling is used to perform a parametric study. The bond between the glass fibre-reinforced polymer (GFRP) bar and alkali-activated cement concrete is modelled by surface-based cohesive behaviour. The accuracy of the model is validated by comparing model predictions with experimental results. The effect of concrete cover, bar diameter, compressive strength, lead length, embedment length and GFRP elastic modulus on bond behaviour is investigated. Each of these parameters are varied based on a range of applicable values to study their influence on bond behaviour. The parametric study showed that bond behaviour is mainly affected by concrete cover, bar diameter, embedment length and the compressive strength of the concrete. The effect of the elastic modulus of the GFRP bar is not as pronounced as that of the other parameters, while the influence of lead length can be avoided by providing enough unbonded length at the loaded end. The parametric study is further used to calibrate a well-known bond equation and develop a new regression equation for predicting the maximum bond stress. The predicted results from these equations showed a good agreement with the experimental results as well as those of the finite-element model. [ABSTRACT FROM AUTHOR]

Alkali-activated cement (AAC) is a promising binder that replaces ordinary Portland cement (OPC). In this study, the development of setting time and strength of AAC mixes were studied using ultrasonic testing method. The test results were compared with traditional Vicat setting time and compressive and flexural strengths. The findings showed that setting times and strengths have a strong correlation with ultrasonic velocity curve. The initial setting time corresponds well with the ultrasonic velocity curve's dormant period, and the final setting time with the time it takes to reach the velocity curve's maximum acceleration. Both setting times also showed a correlation with the value of the maximum acceleration. An exponential relation was found between the ultrasonic velocity and the compressive and flexural strengths. The effect of binder content, alkaline solid to binder ratio (AS/B), sodium silicate to sodium hydroxide solids ratio (SS/SH), and total water to total solid binder ratio (TW/TS) on the strength and setting time are also studied using Taguchi method of experimental design. AS/B ratio showed a significant influence on the setting time of AAC while TW/TS ratio showed only a minor effect. The ultrasonic velocities were able to capture the effect of the different parameters similar to the compressive strength. The velocity decreased mainly with the increase of TW/TS ratio and binder content, while AS/B and SS/SH ratios showed a lower influence. [ABSTRACT FROM AUTHOR]

Concrete is the most commonly used construction material because of its various advantages, such as versatility, familiarity, strength, and durability, and it will continue to be in demand far into the future. However, with today's sensitivity to environmental protection, this material faces unprecedented challenges because of its high greenhouse gas emissions, mainly during cement production. This paper investigates one of the promising cement replacement materials, alkali-activated cement (AAC) concrete. Being produced mainly from byproduct materials and having a comparable structural performance to conventional concrete, AAC concrete can transform the construction industry. Mechanical properties such as compressive and flexural strength and the relationship between them are studied. Different source materials such as fly ash (FA), ground granulated blast furnace slag (GGBS), silica fume (SF), and Metakaolin (MK) are used. The effect of the source materials and the activator solutions on the concrete performance is studied. Furthermore, the freeze-thaw resistance of the concrete is studied. The study results showed that the behavior of AAC depends highly on the source material combinations and type used. The effect of the alkaline solution is also dependent on the source material used. Mixes with higher GGBS content showed the highest strength, while mixes with MK showed the highest flexural strength. The freeze-thaw test results showed that proper design of AAC concrete with lower water content is critical to achieving a good resistance. [ABSTRACT FROM AUTHOR]