Search

Bionanocomposites is an emerging class of biohybrid materials, have a significant impact in environmental and biomedical fields owing to their high performance, lightweight, unique, and ecofriendly properties. A major challenge in the multiphase bionanocomposites system is to subtle control over the performance by managing the individual properties of reacting components. Herein, we presented the preliminary investigation on bionanocomposite system based on graphene nanoplatelets (GNPs) and hydroxyethyl cellulose graft poly(lactic acid) copolymer-polyurethane (HLAC-PU) with the aim to understand the structure property correlation for proposed applications in electronics and medical areas. The HLAC was fabricated by graft copolymerization of hydroxyethyl cellulose (HEC) and lactic acid (LA) with dibutyltin dilaurate. The HLAC was used to get a bio-functionalized PU matrix reinforced with GNPs by step-growth polymerization method. The structural, surface, and thermal properties of the HLAC and GNPs-HLAC-PU bionanocomposites were studied. The spectroscopic techniques confirmed the structure of bionanocomposites by the identification of related bands. The SEM/EDX results demonstrated that the 0.3 wt% of GNPs dispersed well in the HLAC-PU matrix and offered higher crystallinity. The reinforcement of the 0.3 wt% of GNPs has meaningfully enhanced the thermal stability producing higher residue contents. The reinforced GNPs filler increased the water resistance of bionanocomposites by reducing their water vapor permeability., (Copyright © 2020 Elsevier B.V. All rights reserved.)

2-Hydroxyethyl cellulose graft polylactic acid copolymer (HLAC) was prepared by graft copolymerization of lactic acid (LA) and 2-hydroxyethyl cellulose (2-HEC), initiated by dibutyltin dilaurate (DBTDL) catalyst in aqueous media. Halloysite nanotubes (HNTs)/polyurethane (PU) bionanocomposites were prepared using the HLAC as chain extender in the step-growth polymerization. HNTs were dispersed in HLAC based PU matrix at different weight ratios of 0.30, 0.50, 1.00, and 3.00. Chemical structure and morphology of the graft copolymer and bionanocomposite elastomers were characterized using solid state 1 H NMR, ATR-FTIR, XRD, and SEM-EDX, while thermal degradation behavior was studied by TGA and DSC techniques. Surface morphology of the HNTs reinforced HLAC/PU bio-nanocomposites demonstrated the homogeneous dispersion of HNTs with little wavy rough surface at low contents which turned to be brittle at higher contents due to agglomerated HNTs. It is observed that the lower contents of HNTs were completely exfoliated in the HLAC/PU matrix. Crystalline pattern of the elastomers improved at lower contents of HNTs that enhanced the thermal stability of the bionanocomposites. The mechanical testing suggested that HNTs/HLAC/PU bionanocomposites have higher values of tensile strength and % elongation with only 0.3-0.5 wt% contents of HNTs that suggested the potential applications of elastomers at economic cost., (Copyright © 2020 Elsevier B.V. All rights reserved.)

The present research project is planned to prepare novel biodegradable and biocompatible hydroxyethylcellulose-g-poly(lactic acid) (HEC-g-PLA) blended polyurethanes. Hydroxyl terminated polybutadiene (HTPB) was reacted with isophorone diisocyanate (IPDI) to produce NCO-terminated polyurethane prepolymer and extended further by varying the mole ratio of chain extenders (HEC-g-PLA and BDO). The synthesized polyurethane samples were characterized by using Fourier Transform Infrared (FTIR), proton solid-state NMR ( 1 H SS NMR) and X-ray diffraction (XRD). Thermal behavior of synthesized samples was checked by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Biological behavior of the synthesized PU samples was also tested by various biological activities which showed much dependence on the mole ratio of chain extenders. Results indicated that incorporation of grafted HEC in to the polyurethane backbone leads to improvement in antibacterial activity, anti-biofilm inhibition, biocompatibility and non-mutagenicity., (Copyright © 2019 Elsevier B.V. All rights reserved.)

The surface of the cellulosic fabrics was modified using self-prepared emulsions of polyurethane acrylate copolymers (PUACs). PUACs were prepared by varying the molecular weight of polycaprolactone diol (PCL). The PCL was reacted with isophorone diisocyanate (IPDI) and chain was extended with 2-hydroxy ethyl acrylate (HEA) to form vinyl terminated polyurethane (VTPU) preploymer. The VTPU was further co-polymerized through free radical polymerization with butyl acrylate in different proportions. The FT-IR spectra of monomers, prepolymers and copolymers assured the formation of proposed PUACs structure. The various concentrations of prepared PUACs were applied onto the different fabric samples using dip-padding techniques. The results revealed that the application of polyurethane butyl acrylate copolymer showed a pronounced effect on the tear strength and pilling resistance of the treated fabrics., (Copyright © 2014 Elsevier B.V. All rights reserved.)

Polyurethane acrylate copolymers (PACs) were synthesized by three step synthesis process via emulsion polymerization using toluene-2,4-diisocyanate, hydroxy terminated poly (caprolactone) diol (PCL), 2-hydroxyethylacrylate (HEA) and butyl acrylate (BuA). The proposed structure of the synthesized polyurethane acrylate copolymer (PAC) was confirmed using Fourier transform infrared (FTIR) spectrophotometer. The pilling characteristic and antimicrobial activities of the plain weave poly-cotton grey, white, printed and dyed fabric swatches after application of PAC were evaluated. The results revealed that by increasing the molecular weight of PCL in the synthesized PAC samples, the antimicrobial activities increased and this behavior was interpreted in term of increasing hydrophilic character. An increase in pilling ratings of the treated samples has been observed by increasing the molecular weight of the polycaprolactone diols in the synthesized PAC samples., (Copyright © 2013 Elsevier B.V. All rights reserved.)

This work presents the comparative study on the dyeing behavior of cellulose fibers in alkaline solutions and under the influence of UV radiation. The cellulosic fabrics were pretreated followed by conventional mercerization technique or treatment with UV irradiation. For different time duration the reorganization of cellulose fibers by swelling treatments in alkaline solutions results in numerous structural modifications, causing changes of their accessibility and/or reactivity. The results revealed that the swelling of the cellulosic fibers depends on type of pre-treatment, dose of the radiation and the concentration of alkaline solution used. SEM analysis confirmed that UV irradiation of the cellulosic fibers leads to a higher swelling in comparison with any concentration of NaOH treatment. In comparison of both the treatments, the mercerized cellulosic fibers have shown better tear and tensile strength as compared to the untreated and UV irradiated one. There is adverse effect of UV radiation on the mechanical properties of UV radiation. Moreover, no loss in weight was observed after exposing the cellulose fabrics surface to UV radiation., (Copyright © 2012 Elsevier B.V. All rights reserved.)

Present research was proposed to evaluate the effect of UV radiation on the dyeing of cellulosic fabrics with direct dyes. The cellulosic fabric was irradiated by using UV radiation assembly (180 W) for different time intervals i.e., 30, 45, 60, 75 and 90 min respectively. The alike set of fabrics was prepared varying the concentration of NaOH during mercerization of the fabrics. All the treated fabrics were dyed with direct dyes. The dyeing parameters such as temperature, time, pH and salt concentration were optimized. The standard methods were employed to evaluate the color strength at various levels of pH, temperature, dyeing contact time and salt concentration. Scanning electron microscope test was performed in order to evaluate the change in fibril structure and surface. The obtained results of the dyed fabrics previously treated with UV radiation and after mercerization were compared. The results revealed that the color strength of UV-irradiated fabric was high as compared to mercerized cellulosic fabrics., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

The preparation of amino silicone based softeners with different emulsifiers was carried out and adsorbed onto the surfaces of cotton and blends of cotton/polyester fabrics. The softened fabrics have high surface area, so poorly performance in washing and rubbing fastness. It is obvious from the results of colorfastness to rubbing and washing that some of the samples of the dyed fabric treated with prepared softeners have shown some poor rating as compared to the untreated fabrics. However the other two samples have shown acceptable rubbing fastness results without losing softness and permanent handle. It can be observed that washing of the printed treated fabric remains unaffected almost in all the studied samples. Moreover, the application of the prepared softeners has imparted anti pilling property to the fabric. It can be seen that there is a remarkable increase in weights of treated fabrics as compared to the untreated fabrics., (Copyright © 2011 Elsevier B.V. All rights reserved.)

A series of amino silicone based softeners with different emulsifiers were prepared and adsorbed onto the surfaces of cotton and blends of cotton/polyester fabrics. Factors affecting the performance properties of the finished substrate such as post-treatment with amino functional silicone based softener varying different emulsifiers in their formulations and its concentration on different processed fabrics were studied. Fixation of the amino-functional silicone softener onto/or within the cellulose structure is accompanied by the formation of semi-inter-penetrated network structure thereby enhancing both the extent of crosslinking and networking as well as providing very high softness. The results of the experiments indicate that the amino silicone can form a hydrophobic film on both cotton and blends of cotton/polyester fabrics and its coating reduces the surface roughness significantly. Furthermore, the roughness becomes lesser with an increase in the applied strength of amino silicone based softener., (Copyright © 2011 Elsevier B.V. All rights reserved.)

Abstract: Polyurethane acrylate copolymers (PAC) were synthesized via emulsion polymerization following three step synthesis process using toluene-2,4-diisocyanate, hydroxy terminated poly(caprolactone) diol, 2-hydroxyethylacrylate (HEA) and butyl acrylate (BuA). Structural characteristics of the synthesized polyurethane acrylate copolymer (PAC) were studied using Fourier Transform Infrared (FT-IR) spectrophotometer and are with accordance with the proposed PAC structure. The physicochemical properties such as solid contents (%), tackiness, film appearance and emulsion stability were studied, discussed and co-related with other findings. The plain weave poly-cotton printed fabrics after application of PAC was evaluated applying colorfastness standard test method. The results revealed that emulsion stability is the main controlling factor of the synthesized material in order to get better applications and properties. The emulsion stability of the synthesized material increased with increase in molecular weight of the polycaprolactone diol. [Copyright &y& Elsevier]

Abstract: A series of aqueous solutions of poly(vinyl alcohol) of various commercial products were prepared and applied onto the surfaces of cotton and blends of cotton/polyester fabrics. Fourier transform infrared spectrophotometer was used to confirm the molecular structure of the polyvinyl alcohol used. Performance tests such as colorfastness to rubbing (dry and wet) and colorfastness to washing were determined. The controlling variables affecting the performance properties of the finished substrate such as post-treatment with poly(vinyl alcohol) of various commercial trades, concentration and dilutions were studied. Crocking, washing and hue change of the treated dyed and printed fabrics is accompanied by the formation of semi-inter-penetrated network structure due to the presence of the hydroxyl (–OH) groups which make feasible to a number of grafting and physical cross linking reactions of polymer backbone. [Copyright &y& Elsevier]

Abstract: A series of poly(vinyl alcohol) of different commercial grades were prepared and applied onto the surfaces of cotton and blends of cotton/polyester fibers. The molecular structure was confirmed using Fourier Transform Infrared spectroscopy. Physicochemical properties such as viscosity and solid contents (%) were determined and discussed. Factors affecting the performance properties of the finished substrate such as post-treatment with poly(vinyl alcohol) of different grades, concentration and dilutions were studied. Fixation of the poly(vinyl alcohol) onto/or within the cellulose structure is accompanied by the formation of semi-inter-penetrated network structure thereby enhancing the association as well as providing very high stiffness. The results revealed that applications of poly(vinyl alcohol) on the textile fabrics in the finishing processes enables to enhance the stiffness as well as helps to improve its pilling resistance. [Copyright &y& Elsevier]

Abstract: Polyurethane acrylate (PUA) copolymers were synthesized following three step synthesis using toluene-2,4-diisocyanate, poly (2-methyl-1,3-propylene glutarate) diol terminated, 2-hydroxyethylacrylate (HEA) and butyl acrylate (BuA) via emulsion polymerization technique. The conventional spectroscopic characterization of the samples with FT-IR was in accordance with proposed PUA copolymer structure. The synthesized PUA copolymer samples were applied using dip-padding techniques on mill desized, scoured, bleached, printed, 100% cotton combed satin, striped weave fabrics. The emulsion stability evaluation and pilling rating showed reciprocal dependence on the percentage of butyl acrylate (BuA) and dual dependence on the concentration of vinyl terminated polyurethane prepolymer. The results revealed that by decreasing the mole ratio of polyol the emulsion stability and pilling rating drastically increased. [Copyright &y& Elsevier]

Our current research work comprised of synthesis of a series of novel chitosan based water dispersible polyurethanes. The synthesis was carried out in three steps, in first step, the NCO end capped PU-prepolymer was formed through the reaction between Polyethylene glycol (PEG) (Mn = 600), Dimethylolpropionic acid (DMPA) and Isophorone diisocyanate (IPDI). In second step, the neutralization step was carried out by using Triethylamine (TEA) which resulted the formation of neutralized NCO terminated PU-prepolymer, after that the last step chain extension was performed by the addition of chitosan and followed the formation of dispersion by adding calculated amount of water. The proposed structure of CS-WDPUs was confirmed by using FTIR technique. The antimicrobial activities of the plain weave poly-cotton printed and dyed textile swatches after application of CS-WDPUs were also evaluated. The results showed that the chitosan incorporation in to PU backbone has markedly enhanced the antibacterial activity of WDPUs. These synthesized CS-WDPUs are eco-friendly antimicrobial finishes (using natural bioactive agents such as chitosan) with potential applications on polyester/cotton textiles. [ABSTRACT FROM AUTHOR]