Search

Lignocellulosic fibers and microcellulose have been obtained by simple alkaline treatment from softwood almond shells. In particular, the Prunus dulcis Miller (D.A.) Webb. was considered as a agro industrial waste largely available in southern Italy. The materials before and after purification have been characterized by 13C CPMAS NMR spectroscopy methodology. A proper data analysis provided the relative composition of lignin and holocellulose at each purification step and the results were compared with thermogravimetric analysis and FT-IR. To value the possibility of using this material in a circular economy framework, the fibrous cellulosic material was used to manufacture a handmade cardboard. The tensile performances on the prepared cardboard proved its suitability for packaging purposes as a sustainable material. These fibers along with the obtained microcellulose can represent a new use for the almond shells that are mainly used as firewood., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Cellulosic fibres have been obtained by green procedures from the cladodes of Opuntia ficus indica (L.) Mill., constituting a large agro industrial waste in our territory. The materials have been analysed for its relative composition, applying, IR and TG methodologies and it was characterised by the absence of lignin. The fibrous material allowed the manufacture of a handmade paper obtaining an ecological material suitable for packaging purposes. The authors evidenced that the simple protocol based on hot water treatment was able to decrease the amount of hemicellulose in the final material. [ABSTRACT FROM AUTHOR]

This study explores the processability, mechanical, and thermal properties of biocompostable composites based on poly (butylene adipate-co-terephthalate) (PBAT) as polymer matrix and microcrystalline cellulose (MCC) derived from softwood almond (Prunus dulcis) shells (as-MCC) as filler at two different weight concentration, i.e., 10 wt% and 20 wt%. The materials were processed by melt mixing and a commercial MCC (c-MCC) was used as filler comparison. The fibrillar shape of as-MCC particles was found to change the rheological behavior of PBAT, particularly at the highest concentration. The melt mixing processing allowed obtaining a uniform dispersion of both kinds of fillers, slightly reducing the L/D ratio of as-MCC fibers. The as-MCC particles led to a higher increase of the elastic modulus of PBAT if compared to the c-MCC counterparts. Both the MCC fillers caused a drastic reduction of the elongation at break, although it was higher than 120% also at the highest filler concentrations. DSC analysis revealed that both MCC fillers poorly affected the matrix crystallinity, although as-MCC induced a slight PBAT crystallinity increase from 8.8% up to 10.9% for PBAT/as-MCC 20%. Therefore, this work demonstrates the great potential of MCC particles derived from almond shells as filler for biocompostable composites fabrication. [ABSTRACT FROM AUTHOR]