Search

This study assesses the economic performance of a biorefinery producing xylo-oligosaccharides (XOS) from miscanthus by autohydrolysis and purification based on a rigorous model developed in ASPEN Plus. Varied biorefinery capacities (50-250 oven dry metric ton (ODMT)/day) and three XOS content levels (80%, 90%, 95%) are analyzed. The XOS minimum selling price (XOS MSP) is varied between $3,430-$7,500, $4,030-$8,970, and $4,840-$10,640 per metric ton (MT) for 80%, 90%, and 95% content, respectively. The results show that increasing biorefinery capacity can significantly reduce the XOS MSP and higher purity leads to higher XOS MSP due to less yield, and higher capital and operating costs. This study also explores another system configuration to produce high-value byproducts, cellulose microfiber, by utilizing the cellulose to produce microfiber instead of combusting for energy recovery. The XOS MSP of cellulose microfiber case is $2,460-$7,040/MT and thus exhibits potential economic benefits over the other cases., (Copyright © 2021 Elsevier Ltd. All rights reserved.)

With the increasing demand for greener alternatives to fossil-derived products, research on cellulose nanomaterials (CNMs) has rapidly expanded. The combination of nanoscale properties and sustainable attributes makes CNMs an asset in the quest for a sustainable society. However, challenges such as the hydrophilic nature of CNMs, their low compatibility with non-polar matrices and modest thermal stability, slow the development of end-uses. Combination of CNMs with amphiphilic lignin can improve the thermal stability, enhance the compatibility with non-polar matrices and, additionally, endow CNMs with new functionalities e.g., UV shielding or antioxidative properties. This article comprehensively reviews the different design strategies and their influence on properties and applications of CNMs containing lignin in various forms; either as residual lignin, added technical lignin, or nanoscale particles. The review focuses especially on the synergy created between CNMs and lignin, paving the way for new production routes and use of CNM/lignin materials in high-performance applications., (Copyright © 2020 Elsevier Ltd. All rights reserved.)

Deposition of hydrophobic wood extractives and representative model compounds, on the surface of cellulose prior to enzymatic hydrolysis was found to either enhance or inhibit the action of cellulase enzymes. The effect of these compounds was correlated with their chemical structure, which may in part explain the differential effects observed between softwood and hardwood extractives. Specifically, the addition of sterol, enhanced enzymatic hydrolysis of microcrystalline cellulose by 54%, whereas the addition of a triglyceride could inhibit the hydrolysis by 49%. The effects of the different extractives' could be explained by considering their Hansen solubility parameters. The amphiphilic and/or hydrophobic character of model extractives was found to be the variable that affected the deposition of extractives on cellulose surfaces and the eventual adsorption of cellulolytic enzymes on it. The observed beneficial effects of extractives are likely related to a reduction in the irreversible binding of the enzymes on the cellulose surface.

Model cellulose surfaces based on cellulose nanocrystals (CNs) were prepared by the Langmuir-Schaeffer technique. Cellulose nanocrystals were obtained by acid hydrolysis of different natural fibers, producing rodlike nanoparticles with differences in charge density, aspect ratio, and crystallinity. Dioctadecyldimethylammonium bromide (DODA-Br) cationic surfactant was used to create CN-DODA complexes that allowed transfer of the CNs from the air/liquid interface in an aqueous suspension to hydrophobic solid substrates. Langmuir-Schaeffer horizontal deposition at various surface pressures was employed to carry out such particle transfer that resulted in CN monolayers coating the substrate. The morphology and chemical composition of the CN films were characterized by using atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). Also, their swelling behavior and stability after treatment with aqueous and alkaline solutions were studied using quartz crystal microgravimetry (QCM). Overall, it is concluded that the Langmuir-Schaeffer method can be used to produce single coating layers of CNs that were shown to be smooth, stable, and strongly attached to the solid support. The packing density of the films was controlled by selecting the right combination of surface pressure during transfer to the solid substrate and the amount of CNs available relative to the cationic charges at the interface.

This work investigates the effects of PFI mill refining and especially, its contribution to the defibrillation of cellulose fibers, as the mechanical pretreatment step in the production of cellulose nanofibrils (CNFs). Hardwood and softwood kraft pulps were refined at varying PFI mill revolutions and further processed using an ultrafine-friction grinder at predefined low specific energy conditions to produce aqueous CNF suspensions. The degree of fibrillation of the CNFs was assessed by studying the properties of the suspensions and anisotropic foams prepared by ice templating. The differences in aspect ratios of the hardwood and softwood CNFs refined at different PFI mill revolutions resulted in anisotropic foams of distinct porous structures and mechanical performance. The lower the CNF aspect ratio, the weaker the anisotropic foams. Softwood CNF foams demonstrated higher mechanical performance than hardwood foams, mainly due to the inherent differences in structure and morphology between these two fiber types. The presence of hemicelluloses in the CNF suspensions, however, also explained the observed differences in compressive behavior, by their action on the fibril-fibril interactions in the foam cell walls. This study thus sheds light on the role of PFI mill refining as a mechanical pretreatment for CNF production. Low PFI mill revolutions were preferred for optimal fibrillation of both hardwood and softwood fibers prior to the high-shear mechanical treatment. Conversely, a too intense pre-refining resulted in CNF materials with poor performance, due to a sharp decrease in the fiber aspect ratio that inhibited the formation of a percolating network and fibril-fibril interactions. [ABSTRACT FROM AUTHOR]

Optimizing the use of lignocellulosic biomass as the feedstock for renewable energy production is currently being developed globally. Biomass is a complex mixture of cellulose, hemicelluloses, lignins, extractives, and proteins; as well as inorganic salts. Cell wall compositional analysis for biomass characterization is laborious and time consuming. In order to characterize biomass fast and efficiently, several high through-put technologies have been successfully developed. Among them, near infrared spectroscopy (NIR) and pyrolysis-molecular beam mass spectrometry (Py-mbms) are complementary tools and capable of evaluating a large number of raw or modified biomass in a short period of time. NIR shows vibrations associated with specific chemical structures whereas Py-mbms depicts the full range of fragments from the decomposition of biomass. Both NIR vibrations and Py-mbms peaks are assigned to possible chemical functional groups and molecular structures. They provide complementary information of chemical insight of biomaterials. However, it is challenging to interpret the informative results because of the large amount of overlapping bands or decomposition fragments contained in the spectra. In order to improve the efficiency of data analysis, multivariate analysis tools have been adapted to define the significant correlations among data variables, so that the large number of bands/peaks could be replaced by a small number of reconstructed variables representing original variation. Reconstructed data variables are used for sample comparison (principal component analysis) and for building regression models (partial least square regression) between biomass chemical structures and properties of interests. In this review, the important biomass chemical structures measured by NIR and Py-mbms are summarized. The advantages and disadvantages of conventional data analysis methods and multivariate data analysis methods are introduced, compared and evaluated. This review aims to serve as a guide for choosing the most effective data analysis methods for NIR and Py-mbms characterization of biomass. [ABSTRACT FROM AUTHOR]

The growing concern for the environment has resulted in renewed interest in bio-based resources. This study aims to produce a hydrogel adsorbent from cellulose and examine its adsorption performance. In pursuit of this goal, we report a simple one-pot synthesis of cellulose acetate sulfate (CAS), followed by the formation of CAS hydrogels and their subsequent adsorption performances. The CAS includes both hydrophilic and hydrophobic functional groups, enable the formation of a single-component hydrogel through intermolecular interactions in deionized water. The thermal reversibility of CAS hydrogels makes them easily processable into various shapes. The durability of the CAS hydrogel adsorbents can be improved by introducing divalent cations (e.g., Ca2+), which create ionically crosslinked hydrogels. The ionically a crosslinked CAS hydrogel adsorbent exhibits a maximum adsorption capacity of 245 mg/g for methylene blue (MB) at 23 °C and a pH of 7. The adsorption behavior of MB on the CAS hydrogel follows both the pseudo-second-order model and the Langmuir adsorption isotherm model. Furthermore, the CAS hydrogel adsorbent maintains a 70 % removal ratio after five cycles. The simplicity of synthesis and hydrogel formation opens up new possibilities for producing and utilizing cellulose-based hydrogels as adsorbents for aqueous contaminants. [Display omitted] • Cellulose acetate sulfate (CAS) hydrogels were prepared without the needs for crosslinking agents or supplementary polymers • The CAS hydrogels were processed into various shape via extrusion or molding • Double crosslinking was performed to enhance the durability of the CAS hydrogel adsorbents • Adsorption kinetics and isotherm of the CAS hydrogel adsorbent were investigated [ABSTRACT FROM AUTHOR]