Search

Cellulose reducing ends are believed to play a vital role in the cellulose recalcitrance to enzymatic conversion. However, their role in insoluble cellulose accessibility and hydrolysis is not clear. Thus, in this study, reducing ends of insoluble cellulose derived from various sources were modified by applying reducing and/or oxidizing agents. The effects of cellulose reducing ends modification on cellulose reducing ends, cellulose structure, and cellulose accessibility to cellulase were evaluated along with the impact on cellulose hydrolysis with complete as well purified cellulase components. Sodium borohydride (NaBH 4 ) reduction and sodium chlorite-acetic acid (SC/AA) oxidation were able to modify more than 90% and 60% of the reducing ends, respectively, while the bicinchoninic acid (BCA) reagent applied for various cycles oxidized cellulose reducing ends to various extents. X-ray diffractograms of the treated solids showed that these treatments did not change the cellulose crystalline structure and the change in crystallinity index was insignificant. Surprisingly, it was found that the cellulose reducing ends modification, either through selective NaBH 4 reduction or BCA oxidation, had a negligible impact on cellulose accessibility as well on cellulose hydrolysis rates or final conversions with complete cellulase at loadings as low as 0.5 mg protein/g cellulose. In fact, in contrast to what is traditionally believed, modifications of cellulose reducing ends by these two methods had no apparent impact on cellulose conversion with purified cellulase components and their synergy. However, SC/AA oxidation resulted in significant drop in cellulose conversion (10%-50%) with complete as well purified cellulase components. Nonetheless, further research revealed that the cause for drop in cellulose conversion for the SC/AA oxidation case was due to primary hydroxyl groups (PHGs) oxidation and not the oxidation of reducing ends. Furthermore, it was found that the PHGs modification affects cellulose accessibility and slows the cellulase uptake as well resulting in significant drop in cellulose conversions., (© 2024 Wiley Periodicals LLC.)

This study proposed a layer-by-layer technique on the hard CNCs/hydroxyapatite (HAP) matrix using biodegradable and biocompatible chitosan and hyaluronic acid (HA). Inspired by the mineralized collagen in human bone, the CNCs/HAP matrix was synthesized by a facile in situ HAP coating on the CNCs fibers. The chemical and crystalline structure of the CNCs/HAP matrix was investigated with FTIR, XRD, HRTEM, and SAED. The surface of the CNCs/HAP matrix was analyzed by AFM which showed a flat structure with a roughness of 23.12 nm, however, the surface roughness increased to 56.09 nm with the assembly of chitosan and HA. After the LBL assembly, the surface hydrophilicity of the CNCs/HAP films was improved. Moreover, the CNCs/HAP matrix showed enhanced mechanical property than pure CNCs matrix. Although there is compromise in the mechanical property after the LBL assembly, it is anticipated its bioaffinity and biocompatibility will increase with the incoporation of chitosan and HA., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

Amphiphilic additives such as bovine serum albumin (BSA) and Tween have been used to improve cellulose hydrolysis by cellulases. However, there has been a lack of clarity to explain their mechanism of action in enzymatic hydrolysis of pure or low-lignin cellulosic substrates. In this work, a commercial Trichoderma reesei enzyme preparation and the amphiphilic additives BSA and Tween 20 were applied for hydrolysis of pure Avicel cellulose. The results showed that these additives only had large effects on cellulose conversion at low enzyme to substrate ratios when the reaction flasks were shaken. Furthermore, changes in the air-liquid interfacial area profoundly affected cellulose conversion, but surfactants reduced or prevented cellulase deactivation at the air-liquid interface. Not shaking the flasks or adding low amounts of surfactant resulted in near theoretical cellulose conversion at low enzyme loadings given enough reaction time. At low enzyme loadings, hydrolysis of cellulose in lignocellulosic biomass with low lignin content suffered from enhanced enzyme deactivation at the air-liquid interface.

To help understand factors controlling the recalcitrance of lignocellulosic biomass to deconstruction to sugars, poplar was pretreated with liquid hot water (LHW) and extremely dilute acid (EDA) at 140°C and 180°C in batch and flowthrough reactors. The resulting solids were then subjected to enzymatic hydrolysis by eight combinations of cellulase, xylanase, and bovine serum albumin (BSA). Co-addition of xylanase to cellulase resulted in up to 11 percentage points higher overall sugar yield than their sequential addition. In general, supplementation of BSA to enzymes had a larger impact on flowthrough solids with reduced lignin content than batch solids with high lignin content. BSA did not affect xylan yields and while it had low impact on LHW solids, it caused large increases in sugar yields from EDA solids. Flowthrough pretreatment produced less recalcitrant solids than did batch operation, but using very dilute acid reduced recalcitrance even more., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

BackgroundWe recently confirmed that the deactivation of T. reesei cellulases at the air-liquid interface reduces microcrystalline cellulose conversion at low enzyme loadings in shaken flasks. It is one of the main causes for lowering of cellulose conversions at low enzyme loadings. However, supplementing cellulases with small quantities of surface-active additives in shaken flasks can increase cellulose conversions at low enzyme loadings. It was also shown that cellulose conversions at low enzyme loadings can be increased in unshaken flasks if the reactions are carried for a longer time. This study further explores these recent findings to better understand the impact of air-liquid interfacial phenomena on enzymatic hydrolysis of cellulose contained in Avicel, Sigmacell, α-cellulose, cotton linters, and filter paper. The impacts of solids and enzyme loadings, supplementation with nonionic surfactant Tween 20 and xylanases, and application of different types of mixing and reactor designs on cellulose hydrolysis were also evaluated.ResultsAvicel cellulose conversions at high solid loading were more than doubled by minimizing loss of cellulases to the air-liquid interface. Maximum cellulose conversions were high for surface-active supplemented shaken flasks or unshaken flasks because of low cellulase deactivation at the air-liquid interface. The nonionic surfactant Tween 20 was unable to completely prevent cellulase deactivation in shaken flasks and only reduced cellulose conversions at unreasonably high concentrations.ConclusionsHigh dynamic interfacial areas created through baffles in reactor vessels, low volumes in high-capacity vessels, or high shaking speeds severely limited cellulose conversions at low enzyme loadings. Precipitation of cellulases due to aggregation at the air-liquid interface caused their continuous deactivation in shaken flasks and severely limited solubilization of cellulose.

Lignin-containing cellulose nanofibrils (LCNFs) are mainly produced commercially from treated wood pulp, which can decrease some of the carbon-negative benefits of utilizing biomass feedstock. In this work, LCNFs are prepared from non-wood feedstocks, including agricultural residues such as hemp, wheat straw, and flax. These feedstocks allowed for the preparation of LCNFs with a variety of properties, including tailored hydrophobicity. The feedstocks and their subsequent LCNFs are extensively characterized to determine the roles that feedstocks play on the morphology and properties of their resultant LCNFs. The LCNFs were then incorporated into paper handsheets to study their usefulness in papermaking applications, which indicated good potential for the use of wheat straw LCNFs as a surface additive to improve the oil resistance coating. [ABSTRACT FROM AUTHOR]

[Display omitted] Nature provides lots of inspiration for material and structural design for various applications. Deriving design principles from the investigation of nature can provide a rich source of inspiration for the development of multifunctional materials. The bioinspired design templates mainly include mussels, nacre, and various plant species. As a sustainable and renewable feedstock, nanocellulose can be used to fabricate advanced materials with multifunctional properties through bioinspired designs. However, challenges and opportunities remain for realizing the full potential in the design of novel materials. This article reviewed recent development in the bioinspired nanocellulose based materials and their application. This article summarizes the functions (e.g., surface wetting) and applications (e.g., composite) of bioinspired nanocellulose-based materials. The bioinspired design templates are discussed along with strategies, advantages, and challenges to the development of synthetic mimics. Additionally, mechanisms and processes (e.g., chemical modification, self-assembly) leading to biomimetic design are discussed. Finally, future research directions and opportunities of bioinspired nanocellulose-based materials are highlighted. [ABSTRACT FROM AUTHOR]

The native recalcitrance of lignocellulosic biomass hinders its effective deconstruction for biological conversion to fuel ethanol. However, once cellulose is physically available to enzymes/microbes, i.e., macro-accessible, cellulose micro-accessibility, i.e., the accessibility as influenced by cellulose properties, further affects cellulose conversion. Here, we performed a comparative study of the effect of cellulose micro-accessibility on cellulose conversion by two biological approaches of potential commercial interest: consolidated bioprocessing (CBP) using Clostridium thermocellum and cell-free saccharification mediated by fungal enzymes. Commercially available cellulosic substrates, Avicel® PH-101, Sigmacell Cellulose Type 50, cotton linters, Whatman™ 1 milled filter paper, and α-cellulose were employed to constitute different cellulose micro-accessibilities. Physiochemical characterization was performed on these substrates to determine key morphological and chemical differences. Biological conversion of these substrates showed that C. thermocellum was unaffected overall by cellulose structural properties, i.e., micro-accessibility, and achieved similar solids solubilization and metabolite production from these structurally different materials. However, fungal enzymes digested these substrates to different extents. Specifically, glucan conversion of these substrates diminished in the following order: milled filter paper ＞ Avicel ＞ Sigmacell and α-cellulose ＞ cotton linters. Here, we propose that C. thermocellum digestion of lignocellulosic biomass is primarily controlled by the physical availability of cellulose in the lignocellulosic matrix and largely unaffected by cellulose properties once cellulose is made macro-accessible. In contrast, fungal enzymes require cellulose to be physically accessible, i.e., macro-accessible, as well as have properties amenable to digestion, i.e., micro-accessible. [ABSTRACT FROM AUTHOR]

It has been previously shown that cellulose-lignin droplets’ strong interactions, resulting from lignin coalescence and redisposition on cellulose surface during thermochemical pretreatments, increase cellulose recalcitrance to biological conversion, especially at commercially viable low enzyme loadings. However, information on the impact of cellulose–hemicellulose interactions on cellulose recalcitrance following relevant pretreatment conditions are scarce. Here, to investigate the effects of plausible hemicellulose precipitation and re-association with cellulose on cellulose conversion, different pretreatments were applied to pure Avicel® PH101 cellulose alone and Avicel mixed with model hemicellulose compounds followed by enzymatic hydrolysis of resulting solids at both low and high enzyme loadings. Solids produced by pretreatment of Avicel mixed with hemicelluloses (AMH) were found to contain about 2 to 14.6% of exogenous, precipitated hemicelluloses and showed a remarkably much lower digestibility (up to 60%) than their respective controls. However, the exogenous hemicellulosic residues that associated with Avicel following high temperature pretreatments resulted in greater losses in cellulose conversion than those formed at low temperatures, suggesting that temperature plays a strong role in the strength of cellulose–hemicellulose association. Molecular dynamics simulations of hemicellulosic xylan and cellulose were found to further support this temperature effect as the xylan–cellulose interactions were found to substantially increase at elevated temperatures. Furthermore, exogenous, precipitated hemicelluloses in pretreated AMH solids resulted in a larger drop in cellulose conversion than the delignified lignocellulosic biomass containing comparably much higher natural hemicellulose amounts. Increased cellulase loadings or supplementation of cellulase with xylanases enhanced cellulose conversion for most pretreated AMH solids; however, this approach was less effective for solids containing mannan polysaccharides, suggesting stronger association of cellulose with (hetero) mannans or lack of enzymes in the mixture required to hydrolyze such polysaccharides. [ABSTRACT FROM AUTHOR]