Search

Mechanical stimuli are fundamental in the development of organs and tissues, their growth, regeneration or disease. They influence the biochemical signals produced by the cells, and, consequently, the development and spreading of a disease. Moreover, tumour cells are usually characterized by a decrease in the cell mechanical properties that may be directly linked to their metastatic potential. Thus, recently, the experimental and computational study of cell biomechanics is facing a growing interest. Various experimental approaches have been implemented to describe the passive response of cells; however, cell variability and complex experimental procedures may affect the obtained mechanical properties. For this reason, in-silico computational models have been developed through the years, to overcome such limitations, while proposing valuable tools to understand cell mechanical behaviour. This being the case, we propose a combined continuous-tensegrity finite element (FE) model to analyse the mechanical response of a cell and its subcomponents, observing how every part contributes to the overall mechanical behaviour. We modelled both Atomic Force Microscopy (AFM) indentation and micropipette aspiration techniques, as common mechanical tests for cells and elucidated also the role of cell cytoplasm and cytoskeleton in the global cell mechanical response. [ABSTRACT FROM AUTHOR]

Synchronized data from ion currents and optical microscopy have been used to measure the mechanical properties of individual soft microparticles. This new experimental method draws on the signals generated by each particle as it passes through the tip of a pipette. The technique represents an advance on micropipette aspiration (MA), which uses optical microscopy in isolation. The ionic resistance through the tip provides additional information regarding the progress of particle deformation. The augmented technique is demonstrated by studying aspiration of individual bovine erythrocytes into a micropipette. Effective mechanical properties have been deduced by using the ionic current response to measure the dwell time and velocity of erythrocytes. Values obtained for the effective viscosity represent liquid-like deformation of the whole cell, and show a consistent shear thinning effect. The effective elasticity also varies with applied force, and was higher for erythrocytes stored for several weeks. The data show that wall friction is an important factor for the uptake dynamics, and that the erythrocytes were damaged or ruptured when passing through pipettes of opening diameter 0.7 μm, the smallest used. These results demonstrate a new approach to measuring the mechanics of individual bioparticles. • Mechanics of erythrocytes were deduced by measuring ion current during aspiration • Potential cell rupture was identified from current signatures using 0.7 μm pipettes • Apparent viscosity was 4–30 Pa s, with cells exhibiting shear thinning behaviour • In vitro stored cells were found to be stiffer than fresh cells [ABSTRACT FROM AUTHOR]

In this study, an aspiration system for elastic spheres was developed to verify the approximate elastic formula for the aspirated length of a single solid-like cell undergoing micropipette aspiration (MPA), which was obtained in our previous study by theoretical analysis and numerical simulation. Using this system, foam silicone rubber spheres with different diameters and mechanical properties were aspirated in a manner similar to the MPA of single cells. Comparisons between the approximate elastic formula and aspiration experiments of spheres indicated that the predictions of the formula agreed with the experimental results. Additionally, combined with the MPA data of rabbit chondrocytes, differences in terms of the elastic parameters derived from the half-space model, incompressible sphere model, and compressible sphere model were explored. The results demonstrated that the parameter ξ (ξ = R/a, where R is the radius of the cell and a is the inner radius of the micropipette) and Poisson’s ratio significantly influenced the determination of the elastic modulus and bulk modulus of the cell. This work developed for the first time an aspiration system of elastic spheres to study the elastic responses of the MPA of a single cell and provided new evidence supporting the use of the approximate elastic formula to determine cellular elastic parameters from the MPA data. [ABSTRACT FROM AUTHOR]

The cellular structures and mechanical properties of human mesenchymal stem cells (hMSCs) vary significantly during culture and with differentiation. Previously, studies to measure mechanics have provided divergent results using different quantitative parameters and mechanical models of deformation. Here, we examine hMSCs prepared for clinical use and subject them to mechanical testing conducive to the relevant deformability associated with clinical injection procedures. Micropipette aspiration of hMSCs shows deformation as a viscoelastic fluid, with little variation from cell to cell within a population. After two passages, hMSCs deform as viscoelastic solids. Further, for clinical applicability during stem cell migration in vivo, we investigated the ability of hMSCs to invade into micropillar arrays of increasing confinement from 12 to 8 μm spacing between adjacent micropillars. We find that hMSC samples with reduced deformability and cells that are more solid-like with passage are more easily able to enter the micropillar arrays. Increased cell fluidity is an advantage for injection procedures and optimization of cell selection based on mechanical properties may enhance efficacy of injected hMSC populations. However, the ability to invade and migrate within tight interstitial spaces appears to be increased with a more solidified cytoskeleton, likely from increased force generation and contractility. Thus, there may be a balance between optimal injection survival and in situ tissue invasion. [ABSTRACT FROM AUTHOR]

Objective: Chondrocyte dedifferentiation is known to influence cell mechanics leading to alterations in cell function. This study examined the influence of chondrocyte dedifferentiation in monolayer on cell viscoelastic properties and associated changes in actin organisation, bleb formation and membrane-actin cortex interaction.Method: Micropipette aspiration was used to estimate the viscoelastic properties of freshly isolated articular chondrocytes and the same cells after passage in monolayer. Studies quantified the cell membrane-actin cortex adhesion by measuring the critical pressure required for membrane detachment and bleb formation. We then examined the expression of ezrin, radixin and moesin (ERM) proteins which are involved in linking the membrane and actin cortex and combined this with theoretical modelling of bleb dynamics.Results: Dedifferentiated chondrocytes at passage 1 (P1) were found to be stiffer compared to freshly isolated chondrocytes (P0), with equilibrium modulus values of 0.40 and 0.16 kPa respectively. The critical pressure increased from 0.59 kPa at P0 to 0.74 kPa at P1. Dedifferentiated cells at P1 exhibited increased cortical F-actin organisation and increased expression of total and phosphorylated ERM proteins compared to cells at P0. Theoretical modelling confirmed the importance of membrane-actin cortex adhesion in regulating bleb formation and effective cellular elastic modulus.Conclusion: This study demonstrates that chondrocyte dedifferentiation in monolayer strengthens membrane-actin cortex adhesion associated with increased F-actin organisation and up-regulation of ERM protein expression. Thus dedifferentiated cells have reduced susceptibility to bleb formation which increases cell modulus and may also regulate other fundamental aspects of cell function such as mechanotransduction and migration. [ABSTRACT FROM AUTHOR]

Objectives: Primary cilia are microtubule based organelles which control a variety of signalling pathways important in cartilage development, health and disease. This study examines the role of the intraflagellar transport (IFT) protein, IFT88, in regulating fundamental actin organisation and mechanics in articular chondrocytes.Methods: The study used an established chondrocyte cell line with and without hypomorphic mutation of IFT88 (IFT88(orpk)). Confocal microscopy was used to quantify F-actin and myosin IIB organisation. Viscoelastic cell and actin cortex mechanics were determined using micropipette aspiration with actin dynamics visualised in live cells transfected with LifeACT-GFP.Results: IFT88(orpk) cells exhibited a significant increase in acto-myosin stress fibre organisation relative to wild-type (WT) cells in monolayer and an altered response to cytochalasin D. Rounded IFT88(orpk) cells cultured in suspension exhibited reduced cortical actin expression with reduced cellular equilibrium modulus. Micropipette aspiration resulted in reduced membrane bleb formation in IFT88(orpk) cells. Following membrane blebbing, IFT88(orpk) cells exhibited slower reformation of the actin cortex. IFT88(orpk) cells showed increased actin deformability and reduced cortical tension confirming that IFT regulates actin cortex mechanics. The reduced cortical tension is also consistent with the reduced bleb formation.Conclusions: This study demonstrates for the first time that the ciliary protein IFT88 regulates fundamental actin organisation and the stiffness of the actin cortex leading to alterations in cell deformation, mechanical properties and blebbing in an IFT88 chondrocyte cell line. This adds to the growing understanding of the role of primary cilia and IFT in regulating cartilage biology. [ABSTRACT FROM AUTHOR]

The actin cytoskeleton forms a dynamic structure involved in many fundamental cellular processes including the control of cell morphology, migration and biomechanics. Recently LifeAct-GFP (green fluorescent protein) has been proposed for visualising actin structure and dynamics in live cells as an alternative to actin-GFP which has been shown to affect cell mechanics. Here we compare the two approaches in terms of their effect on cellular mechanical behaviour. Human mesenchymal stem cells (hMSCs) were analysed using micropipette aspiration and the effective cellular equilibrium and instantaneous moduli calculated using the standard linear solid model. We show that LifeAct-GFP provides clearer visualisation of F-actin organisation and dynamics. Furthermore, LifeAct-GFP does not alter effective cellular mechanical properties whereas actin-GFP expression causes an increase in the cell modulus. Interestingly, LifeAct-GFP expression did produce a small (~10%) increase in the percentage of cells exhibiting aspiration-induced membrane bleb formation, whilst actin-GFP expression reduced blebbing. Further studies examined the influence of LifeAct-GFP in other cell types, namely chondrogenically differentiated hMSCs and murine chondrocytes. LifeAct-GFP also had no effect on the moduli of these non-blebbing cells for which mechanical properties are largely dependent on the actin cortex. In conclusion we show that LifeAct-GFP enables clearer visualisation of actin organisation and dynamics without disruption of the biomechanical properties of either the whole cell or the actin cortex. Thus the study provides new evidence supporting the use of LifeAct-GFP rather than actin-GFP for live cell microscopy and the study of cellular mechanobiology. [ABSTRACT FROM AUTHOR]

Human mesenchymal stem cells (hMSCs) are multipotent cells appropriate for a variety of tissue engineering and cell therapy applications. Mechanical properties of hMSCs during differentiation are associated with their particular metabolic activity and regulate cell function due to alternations in cytoskeleton and structural elements. The objective of this study is to evaluate elastic and viscoelastic properties of hMSCs during long term cultivation in control and transforming growth factor-β treatment groups using micropipette aspiration technique. The mean Young's modulus ( E) of the control samples remained nearly unchanged during 6 days of cultivation, but that of the test samples showed an initial reduction compared to its relevant control sample after 2 days of treatment by biological growth factor, followed by a significant rise after 4 and 6 days. The viscoelastic creep tests showed that both instantaneous and equilibrium moduli significantly increased with the treatment time and reached to maximum values of 622.9 ± 114.2 and 144.3 ± 11.6 Pa at the sixth day, respectively, while increase in apparent viscosity was not statistically significant. Such change of mechanical properties of hMSCs during specific lineage commitment contributes to regenerative medicine as well as stem-cell-based therapy in which biophysical signals regulate stem cell fate. [ABSTRACT FROM AUTHOR]

Abstract: Increasing evidence indicates that the progression of calcific aortic valve disease (CAVD) is influenced by the mechanical forces experienced by valvular interstitial cells (VICs) embedded within the valve matrix. The ability of VICs to sense and respond to tissue-level mechanical stimuli depends in part on cellular-level biomechanical properties, which may change with disease. In this study, we used micropipette aspiration to measure the instantaneous elastic modulus of normal VICs and of VICs induced to undergo pathological differentiation in vitro to osteoblast or myofibroblast lineages on compliant and stiff collagen gels, respectively. We found that VIC elastic modulus increased after subculturing on stiff tissue culture-treated polystyrene and with pathological differentiation on the collagen gels. Fibroblast, osteoblast, and myofibroblast VICs had distinct cellular-level elastic properties that were not fully explained by substrate stiffness, but were correlated with α-smooth muscle actin expression levels. C-type natriuretic peptide, a peptide expressed in aortic valves in vivo, prevented VIC stiffening in vitro, consistent with its ability to inhibit α-smooth muscle actin expression and VIC pathological differentiation. These data demonstrate that VIC phenotypic plasticity and mechanical adaptability are linked and regulated both biomechanically and biochemically, with the potential to influence the progression of CAVD. [Copyright &y& Elsevier]

Cell-substrate adhesion is a critical factor in the development of biomaterials for use in applications such as implantable devices and tissue engineering scaffolds. In addition, cell adhesion to the extracellular matrix is intertwined with a number of fundamental cell processes, and several diseases are characterized by cells with altered adhesion properties. While many approaches exist to characterize cell adhesion, only a fraction of the techniques provides quantitative measurements of the strength of adhesion by physically detaching cells through application of force or stress. In this review, the most commonly used techniques to measure the adhesion strength of cells adhered to substrates are summarized. These methods can be divided into three general categories: centrifugation, hydrodynamic shear and micromanipulation. For each method, the technique is described and its capabilities assessed. A comprehensive review of recent applications of the methods is given, and adhesion strength measurements performed using different techniques on fibroblasts, a commonly-studied cell, are compared. Finally, the strengths and drawbacks of the various techniques are discussed. [ABSTRACT FROM AUTHOR]

Abstract: The viscoelastic properties of cells are important in predicting cell deformation under mechanical loading and may reflect cell phenotype or pathological transition. Previous studies have demonstrated that viscoelastic parameters estimated by finite element (FE) analyses of micropipette aspiration (MA) data differ from those estimated by the analytical half-space model. However, it is unclear whether these differences are statistically significant, as previous studies have been based on average cell properties or parametric analyses that do not reflect the inherent experimental and biological variability of real experimental data. To determine whether cell material parameters estimated by the half-space model are significantly different from those predicted by the FE method, we implemented an inverse FE method to estimate the viscoelastic parameters of a population of primary porcine aortic valve interstitial cells tested by MA. We found that inherent differences between the analytical and inverse FE estimation methods resulted in statistically significant differences in individual cell properties. However, in cases with small pipette to cell radius ratios and short loading periods, model-dependent differences were masked by experimental and cell-to-cell variability. Analytical models that account for finite cell-size and loading rate further relaxed the experimental conditions for which accurate cell material parameter estimates could be obtained. These data provide practical guidelines for analysis of MA data that account for the wide range of conditions encountered in typical experiments. [Copyright &y& Elsevier]

lt has been speculated that heart valve interstitial cells (VICs) maintain valvular tissue homeostasis through regulated extracellular matrix (primarily collagen) biosynthesis. VICs appear to be phenotypically plastic, inasmuch as they transdifferentiate into myofibroblasts during valve development, disease, and remodeling. Under normal physiological conditions, transvalvular pressures (TVPs) on the right and left side of the heart are vastly different. Hence, we hypothesize that higher left-side TVPs impose larger local tissue stress on VICs, which increases their stiffness through cytoskeletal composition, and that this relation affects collagen biosynthesis. To evaluate this hypothesis, isolated ovine VICs from the four heart valves were subjected to micropipette aspiration to assess cellular stiffness, and cytoskeletal composition and collagen biosynthesis were quantified by using the surrogates smooth muscle a-actin (SMA) and heat shock protein 47 (HSP47), respectively. VICs from the aortic and mitral valves were significantly stiffer (P < 0.001) than those from the pulmonary and tricuspid valves. Left-side isolated VICs contained significantly more (P < 0.001) SMA and HSP47 than right-side VICs, Mean VIC stiffness correlated well (r = 0.973) with TVP; SMA and HSP47 also correlated well (r = 0.996) with one another. Assays were repeated for VICs in situ, and, as with in vitro results, left-side VIC protein levels were significantly greater (P < 0.05). These findings suggest that VICs respond to local tissue stress by altering cellular stiffness (through SMA content) and collagen biosynthesis. This functional VIC stress-dependent biosynthetic relation may be crucial in maintaining valvular tissue homeostasis and also prove useful in under- standing valvular pathologies. [ABSTRACT FROM AUTHOR]

Biomechanical factors are believed to play an important role in regulating the metabolic activity of chondrocytes in articular cartilage. Previous studies suggest that cytoskeletal proteins such as actin, vimentin, and tubulin influence cellular mechanical properties, and may therefore influence the mechanical interactions between the chondrocyte and the surrounding tissue matrix. In this study, we investigated the role of specific cytoskeletal components on the mechanical properties of individual chondrocytes isolated from normal or osteoarthritic hip articular cartilage. Chondrocytes were exposed to a range of concentrations of chemical agents that disrupt the primary cytoskeletal elements (cytochalasin D for F-actin microfilaments, acrylamide for vimentin intermediate filaments, and colchicine for microtubules). Chondrocyte mechanical properties were determined using the micropipette aspiration technique coupled with a viscoelastic solid model of the cell. Chondrocyte stiffness (elastic modulus) was significantly increased with osteoarthritis. With increasing cytochalasin D treatment, chondrocyte stiffness decreased by up to 90% and apparent viscosity decreased by up to 80%. The effect of cytochalasin D was greater on normal chondrocytes than those isolated from osteoarthritic cartilage. Treatment with acrylamide also decreased the moduli and viscosity, but only at the highest concentration tested. No consistent changes in cell mechanical properties were observed with colchicine treatment. These findings suggest that microfilaments and possibly intermediate filaments provide the viscoelastic properties of the chondrocyte, and changes in the structure and properties of these cytoskeletal elements may reflect changes in the chondrocyte with osteoarthritis. [Copyright &y& Elsevier]