Search

Industrial-scale thermal separation processes have contributed greatly to the rise in carbon dioxide emissions. Porous materials, such as metal-organic frameworks (MOFs), can potentially reduce these emissions by achieving nonthermal chemical separations through the physical adsorption of targeted species with high selectivity. Here, we report the synthesis of the channel-based MOFs

Zirconium-based metal–organic frameworks (Zr-MOFs) have been increasingly studied over the past two decades as heterogeneous catalysts due to their synthetic tunability, well-defined nature, and ch...

Recent studies have shown that metal-organic frameworks (MOFs) built from hexanuclear M(IV) oxide cluster nodes are effective catalysts for nerve agent hydrolysis, where the properties of the active sites on the nodes can strongly influence the reaction energetics. The connectivity and metal identity of these M6 nodes can be easily tuned, offering extensive opportunities for computational screening to predict promising new materials. Thus, we used density functional theory (DFT) to examine the effects of node topology, connectivity, and metal identity on the binding energies of multiple nerve agents and their corresponding hydrolysis products. By computing an optimization metric based on the relative binding strengths of key hydrolysis reaction species (water, agent, and bidentate-bound products), we predicted optimal M6 nodes for hydrolyzing specific nerve agent and simulant molecules, where our results are in qualitative agreement with observed experimental trends. This analysis highlighted the notion that no single metal or node topology is optimal for all possible organophosphates, suggesting that MOFs should be selected based on the agent of interest. Using the large amount of data generated from our DFT calculations, we then derived quantitative structure-activity relationship (QSAR) models to help explain the complex trends observed in the binding energies. Through linear regression, we identified the most important descriptors for describing the binding of nerve agents and their hydrolysis products to M6 nodes. These results suggested that both molecular and node properties, including both structural and chemical features, collectively contribute to the binding energetics. By performing a thorough statistical analysis, we showed that our QSAR models are capable of making quantitatively accurate binding energy predictions for nerve agents and their hydrolysis products in a wide variety of M(IV)-MOFs. The insights gained herein can be used to guide future experiments for the synthesis of MOFs with enhanced catalytic activity for organophosphate hydrolysis.

Density functional theory is used to study the tunability of trigonal prismatic SBUs found in metal–organic frameworks (MOFs) such as MIL-100, MIL-101, and PCN-250/MIL-127 of chemical composition M...

Through quantum-chemical calculations, we investigate a family of metal-organic frameworks (MOFs) containing triazolate linkers, M2 X2 (BBTA) (M=metal, X=bridging anion, H2 BBTA=1H,5H-benzo(1,2-d:4,5-d')bistriazole), for their ability to form terminal metal-oxo sites and subsequently activate the C-H bond of methane. By varying the metal and bridging anion in the framework, we show how to significantly tune the reactivity of this series of MOFs. The electronic structure of the metal-oxo active site is analyzed for each combination of metal and bridging ligand, and we find that spin density localized on the oxo ligand is not an inherent requirement for low C-H activation barriers. For the Mn- and Fe-containing frameworks, a transition from ferromagnetic to antiferromagnetic coupling between the metal binding site and terminal oxo ligand during the C-H activation process can greatly reduce the kinetic barrier, a unique case of two-state reactivity without a change in the net spin multiplicity.

Alumina-supported VOx-CeO2 materials are synthesized by atomic layer deposition (ALD) and evaluated in cyclohexane oxidative dehydrogenation (ODH). The order of deposition of the two metal oxides by ALD influences the size, geometry and oxidation state of the resulting surface species as indicated by Raman spectroscopy coupled with density functional theory (DFT) calculations and XPS. The individual contributions of VOx and CeO2 surface sites to the cyclohexane ODH reaction mechanism are investigated through a comparison of the catalytic activity of the supported mixed metal oxide materials, VOx/Al2O3, VOx/CeO2 and a bare CeO2 support. The highest activity is observed for CeO2, and different surface active sites are distinguished by introducing cyclohexane and cyclohexene in the reactant feed mixture. The catalytic behavior is dependent on the nature of V O S (S, Support) bonds, and small clusters of CeO2 on Al2O3 favor total oxidation, similar to exposed CeO2 sites in VOx/CeO2.

Metal-organic frameworks (MOFs) with coordinatively unsaturated metal sites are appealing as adsorbent materials due to their tunable functionality and ability to selectively bind small molecules. Through the use of computational screening methods based on periodic density functional theory, we investigate O2 and N2 adsorption at the coordinatively unsaturated metal sites of several MOF families. A variety of design handles are identified that can be used to modify the redox activity of the metal centers, including changing the functionalization of the linkers (replacing oxido donors with sulfido donors), anion exchange of bridging ligands (considering μ-Br-, μ-Cl-, μ-F-, μ-SH-, or μ-OH- groups), and altering the formal oxidation state of the metal. As a result, we show that it is possible to tune the O2 affinity at the open metal sites of MOFs for applications involving the strong and/or selective binding of O2. In contrast with O2 adsorption, N2 adsorption at open metal sites is predicted to be relatively weak across the MOF dataset, with the exception of MOFs containing synthetically elusive V2+ open metal sites. As one example from the screening study, we predicted that exchanging the μ-Cl- ligands of M2Cl2(BBTA) (H2BBTA = 1H,5H-benzo(1,2-d:4,5-d')bistriazole) with μ-OH- groups would significantly enhance the strength of O2 adsorption at the open metal sites without a corresponding increase in the N2 affinity. Experimental investigation of Co2Cl2(BBTA) and Co2(OH)2(BBTA) confirms that the former exhibits weak physisorption of both N2 and O2, whereas the latter is capable of chemisorbing O2 at room temperature in a highly selective manner. The O2 chemisorption behavior is attributed to the greater electron-donating character of the μ-OH- ligands and the presence of H-bonding interactions between the μ-OH- bridging ligands and the reduced O2 adsorbate.

The efficient preparation of single-crystalline ionic polymers and fundamental understanding of their structure-property relationships at the molecular level remains a challenge in chemistry and materials science. Here, we describe the single-crystal structure of a highly ordered polycationic polymer (polyelectrolyte) and its proton conductivity. The polyelectrolyte single crystals can be prepared on a gram-scale in quantitative yield, by taking advantage of an ultraviolet/sunlight-induced topochemical polymerization, from a tricationic monomer-a self-complementary building block possessing a preorganized conformation. A single-crystal-to-single-crystal photopolymerization was revealed unambiguously by in situ single-crystal X-ray diffraction analysis, which was also employed to follow the progression of molecular structure from the monomer, to a partially polymerized intermediate, and, finally, to the polymer itself. Collinear polymer chains are held together tightly by multiple Coulombic interactions involving counterions to form two-dimensional lamellar sheets (1 nm in height) with sub-nanometer pores (5 Å). The polymer is extremely stable under 254 nm light irradiation and high temperature (above 500 K). The extraordinary mechanical strength and environmental stability-in combination with its impressive proton conductivity (∼3 × 10

Using density functional theory (DFT), we studied the catalytic activity of iron oxide nanoclusters that mimic the structure of the active site in the soluble form of methane monooxygenase (sMMO) for the partial oxidation of methane to methanol. Using N

Zirconium-based metal-organic frameworks (Zr-MOFs) have been reported to be efficient catalysts for the hydrolysis of organophosphate chemical warfare agents (CWAs) in buffered solutions. However, for the gas-phase reaction, which is more relevant to the situation in a battlefield gas mask application, the kinetics of Zr-MOF catalysts may be severely hindered by strong product inhibition. To improve the catalytic performance, we computationally screened a series of synthetically accessible Zr-MOF-supported bimetallic metal-oxo clusters in which the metal-oxygen-metal active motif is preserved, aiming to find catalysts that have lower binding affinities to the hydrolysis product. For the promising catalyst Al

The rational design and synthesis of robust metal-organic frameworks (MOFs) based on novel organic building blocks are fundamental aspects of reticular chemistry. Beyond simply fabricating new organic linkers, however, it is important to elucidate structure-property relationships at the molecular level to develop high-performing materials. In this work, we successfully targeted a highly porous and robust cage-type MOF (NU-200) with an

The development of adsorbents with molecular precision offers a promising strategy to enhance storage of hydrogen and methane─considered the fuel of the future and a transitional fuel, respectively─and to realize a carbon-neutral energy cycle. Herein we employ a postsynthetic modification strategy on a robust metal-organic framework (MOF), MFU-4l, to boost its storage capacity toward these clean energy gases. MFU-4l-Li displays one of the best volumetric deliverable hydrogen capacities of 50.2 g L-1 under combined temperature and pressure swing conditions (77 K/100 bar → 160 K/5 bar) while maintaining a moderately high gravimetric capacity of 9.4 wt %. Moreover, MFU-4l-Li demonstrates impressive methane storage performance with a 5-100 bar usable capacity of 251 cm3 (STP) cm-3 (0.38 g g-1) and 220 cm3 (STP) cm-3 (0.30 g g-1) at 270 and 296 K, respectively. Notably, these hydrogen and methane storage capacities are significantly improved compared to those of its isoreticular analogue, MFU-4l, and place MFU-4l-Li among the best MOF-based materials for this application.

The modular structure of metal–organic frameworks (MOFs) makes them promising platforms for catalyst design and for elucidating structure/performance relationships in catalysis. In this work, we sy...

In this work, we leverage advances in computational screening based on periodic density functional theory (DFT) to study a diverse set of experimentally derived metal–organic frameworks (MOFs) with...

Metal-organic frameworks (MOFs) are a class of nanoporous materials with highly tunable structures in terms of both chemical composition and topology. Due to their tunable nature, high-throughput computational screening is a particularly appealing method to reduce the time-to-discovery of MOFs with desirable physical and chemical properties. In this work, a fully automated, high-throughput periodic density functional theory (DFT) workflow for screening promising MOF candidates was developed and benchmarked, with a specific focus on applications in catalysis. As a proof-of-concept, we use the high-throughput workflow to screen MOFs containing open metal sites (OMSs) from the Computation-Ready, Experimental MOF database for the oxidative C-H bond activation of methane. The results from the screening process suggest that, despite the strong C-H bond strength of methane, the main challenge from a screening standpoint is the identification of MOFs with OMSs that can be readily oxidized at moderate reaction conditions. © 2019 Wiley Periodicals, Inc.

Uremic toxins often accumulate in patients with compromised kidney function, like those with chronic kidney disease (CKD), leading to major clinical complications including serious illness and death. Sufficient removal of these toxins from the blood increases the efficacy of hemodialysis, as well as the survival rate, in CKD patients. Understanding the interactions between an adsorbent and the uremic toxins is critical for designing effective materials to remove these toxic compounds. Herein, we study the adsorption behavior of the uremic toxins, p-cresyl sulfate, indoxyl sulfate, and hippuric acid, in a series of zirconium-based metal-organic frameworks (MOFs). The pyrene-based MOF, NU-1000, offers the highest toxin removal efficiency of all the MOFs in this study. Other Zr-based MOFs possessing comparable surface areas and pore sizes to NU-1000 while lacking an extended aromatic system have much lower toxin removal efficiency. From single-crystal X-ray diffraction analyses assisted by density functional theory calculations, we determined that the high adsorption capacity of NU-1000 can be attributed to the highly hydrophobic adsorption sites sandwiched by two pyrene linkers and the hydroxyls and water molecules on the Zr6 nodes, which are capable of hydrogen bonding with polar functional groups of guest molecules. Further, NU-1000 almost completely removes p-cresyl sulfate from human serum albumin, a protein that these uremic toxins bind to in the body. These results offer design principles for potential MOFs candidates for uremic toxin removal.

Benzoic acid modulators that “cap” the Zr6-oxo-hydroxo cluster nodes in UiO-66 metal–organic frameworks can be removed to increase the number of “open” sites (i.e., those that are terminated with [μ1-OH + μ1-OH2]) up to 5 per node, enabling the “decapped” materials to exhibit enhanced catalytic activity in the oxidation of methyl phenyl sulfide. Computational modeling reveals that the labile Zr-μ1-OH groups on these open sites are likely converted into Zr-μ1-OOH species that are active in oxidizing the sulfide as well as its sulfoxide product. In solvents such as CH3CN and CH2Cl2, the sulfoxide product can additionally replace the aquo ligands of the Zr-μ1-OH2 moieties to increase the concentration of the sulfoxide adjacent to the active Zr-μ1-OOH species, resulting in overoxidation to the sulfone. However, the use of CH3OH, a solvent that can compete with the sulfoxide and suppress this binding mode, can retard the overoxidation and lead to higher selectivities for the sulfoxide product.

Organophosphorus nerve agents, a class of extremely toxic chemical warfare agents (CWAs), have remained a threat to humanity because of their continued use against civilian populations. To date, Zr(IV)-based metal organic framework (MOFs) are the most prevalent nerve agent hydrolysis catalysts, and relatively few reports disclose MOFs containing nodes with other Lewis acidic transition metals. In this work, we leveraged this synthetic tunability to explore how the identity of the transition metal node in the M-MFU-4l series of MOFs (M = Zn, Cu, Ni, Co) influences the catalytic performance toward the hydrolysis of the nerve agent simulant dimethyl (4-nitrophenyl)phosphate (DMNP). Experimental studies reveal that Cu-MFU-4l exhibits the best performance in this series with a half-life for hydrolysis of ∼2 min under these conditions. In contrast, both Ni- and Co-MFU-4l demonstrate significantly slower reactivity toward DMNP, as they both fail to surpass 30% conversion of DMNP after 1 h under analogous conditions. Further modification of the active site within Cu-MFU-4l is possible, and we found that although the identity of the anion coordinated to the Cu(II)-X (X = Cl-, HCOO-, ClO4-, NO3-) active site has little influence on the catalytic performance, reduction of the Cu(II) sites yields nodes that contain Cu(I) ions in a trigonal geometry with open metal sites, leading to remarkable catalytic activity with a half-life for hydrolysis less than 2 min. Computational studies indicate the Cu(I) sites exhibit stronger binding affinities than Cu(II) to both water and DMNP, which corroborates the experimental results.

For the most part, enzymes contain one active site wherein they catalyze in a serial manner chemical reactions between substrates both efficiently and rapidly. Imagine if a situation could be created within a chiral porous crystal containing trillions of active sites where substrates can reside in vast numbers before being converted in parallel into products. Here, we report how it is possible to incorporate 1-anthracenecarboxylate (1-AC-) as a substrate into a γ-cyclodextrin-containing metal-organic framework (CD-MOF-1), where the metals are K+ cations, prior to carrying out [4+4] photodimerizations between pairs of substrate molecules, affording selectively one of four possible regioisomers. One of the high-yielding regioisomers exhibits optical activity as a result of the presence of an 8:1 ratio of the two enantiomers following separation by high-performance liquid chromatography. The solid-state superstructure of 1-anthracenecarboxylate potassium salt (1-ACK), which is co-crystallized with γ-cyclodextrin, reveals that pairs of substrate molecules are not only packed inside tunnels between spherical cavities present in CD-MOF-1, but also stabilized-in addition to hydrogen-bonding to the C-2 and C-3 hydroxyl groups on the d-glucopyranosyl residues present in the γ-cyclodextrin tori-by combinations of hydrophobic and electrostatic interactions between the carboxyl groups in 1-AC- and four K+ cations on the waistline between the two γ-cyclodextrin tori in the tunnels. These non-covalent bonding interactions result in preferred co-conformations that account for the highly regio- and enantioselective [4+4] cycloaddition during photoirradiation. Theoretical calculations, in conjunction with crystallography, support the regio- and stereochemical outcome of the photodimerization.

Reliable information on the hydrophobicity of porous materials is important in the design of many catalytic and separation processes. In general, hydrophobicity is assessed by measuring the contact angle of water (external surface) or the adsorption isotherm of water (internal surface). However, it is not clear how these different assessments are related. In this paper, molecular dynamics simulations of microscopic water droplets on the external surfaces of metal-organic frameworks are used to investigate the influence of the surface nature and hydrophobicity on the contact angle. The metal-organic frameworks MOF-5 and CAU-10 were modeled with external surfaces of different hydrophobicities, while the internal surface was maintained. It was observed that microscopic droplets orientate their spreading to the nature of the external surfaces. Comparing the simulated contact angles and adsorption isotherms confirms the necessity to distinguish between internal and external hydrophobicity.

Metal-organic frameworks (MOFs) have been widely investigated for challenging catalytic transformations due to their well-defined structures and high degree of synthetic tunability. These features, at least in principle, make MOFs ideally suited for a computational approach towards catalyst design and discovery. Nonetheless, the widespread use of data science and machine learning to accelerate the discovery of MOF catalysts has yet to be substantially realized. In this review, we provide an overview of recent work that sets the stage for future high-throughput computational screening and machine learning studies involving MOF catalysts. This is followed by a discussion of several challenges currently facing the broad adoption of data-centric approaches in MOF computational catalysis, and we share possible solutions that can help propel the field forward., 14 pages, 4 figures; to be published in Curr. Opin. Chem. Eng

The prospect of using copper oxide nanoclusters grown by atomic layer deposition on a porphyrin support for selective oxidation of methane to methanol was examined by means of density functional theory (DFT) calculations. Ab initio thermodynamic analysis indicates that an active site in the form of Cu(μ-O)Cu can be stabilized by activation in O2 at 465 K. Furthermore, a moderate methane activation energy barrier (Ea = 54 kJ/mol) is predicted, and the hydrogen abstraction activity of the active site could be attributed to the radical character of the bridging oxygen. Methanol extraction in this system is limited by a thermodynamic barrier to desorption of ΔG = 57 kJ/mol at 473 K; however, desorption can be facilitated by the addition of water in a “stepped conversion” process. Overall, our results indicate similar activity between porphyrin-supported copper oxide nanoclusters and existing Cu-exchanged zeolites and provide a computational proof-of-concept for utilizing functionalized organic linkers in metal-organic frameworks (MOFs) for selective oxidation of methane to methanol.

Six first-row transition metal cations (Mn2+, Fe2+, Co2+, Ni2+, Cu2+, Zn2+) were evaluated as catalysts for ethene dimerization to 1-butene. This is an important reaction in the chemistry of C C bond formation and in the conversion of natural gas to higher hydrocarbons. Two related classes of transition metal cation catalysts were investigated: 1) single transition metal cations supported on zirconium oxide nodes of the metal–organic framework NU-1000 and 2) small metal hydroxide clusters with two metal atoms (M2) that could be grown by atomic layer deposition on a support exhibiting isolated hydroxyl groups. Using scaling relations, the free energies of co-adsorbed hydrogen and ethene (i.e., (H/C2H4)*) and adsorbed ethyl (i.e., C2H5*) were identified as descriptors for ethene dimerization catalysis. Using degree of rate control analysis, it was determined that the rate controlling steps are either ethene insertion (C C bond forming) or β-hydride elimination (C H bond breaking), depending on the metal. Using degree of catalyst control analysis, it was determined that activity on all the catalysts studied could be improved by tuning the free energy of C2H5*.

Metal–organic frameworks (MOFs) have been reported to be versatile catalysts because of their amenability to modular design and tunability. Recently, a series of zirconium-based MOFs have been used to catalyze the hydrolytic destruction of chemical warfare agents (CWAs) that contain phosphate ester bonds. Here, we adopt density functional theory calculations to study the hydrolysis of the CWA simulant methylparaoxon on the Zr-based MOF NU-1000. Our calculated energy barriers are in quantitative agreement with previous experimental kinetics data. Comparison between uncatalyzed aqueous hydrolysis and the MOF-catalyzed reaction reveals the origin of the catalytic effects of NU-1000 and shows a resemblance to enzymatic catalysis of similar reactions. The effect of node distortion on the catalytic mechanism is also examined, and the results are consistent with experimental findings, where the distorted node of NU-1000 shows an increase in the rate of methylparaoxon hydrolysis compared to the completely hydrate...

Composites of metal nanoparticles encapsulated in metal–organic frameworks (NP@MOFs) have emerged as heterogeneous catalysts for regioselective reactions. While numerous NP@MOF composite combinations have been synthesized, characterization of the nanoparticle–MOF interface and the encapsulated nanoparticle surface have yet to be determined. In this work, Pt@ZIF-8 synthesized by the controlled encapsulation method was chosen as a representative NP@MOF, and in situ characterization methods coupled with density functional theory (DFT) calculations were used to probe the nanoparticle surface. CO adsorption diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) revealed that Pt@ZIF-8 exhibits red-shifted linear- and bridge-bound CO peaks and a linear peak associated with cationic Pt. DFT calculations and 1H NMR suggest that these sites arise from the binding and electronic donation of the MOF linker, 2-methylimidazole, to the Pt surface. DRIFTS under argon reveals that linker fragments may be pre...

Activation of the C-H bonds in ethane to form ethanol is a highly desirable, yet challenging, reaction. Metal-organic frameworks (MOFs) with open Fe sites are promising candidates for catalyzing this reaction. One advantage of MOFs is their modular construction from inorganic nodes and organic linkers, allowing for flexible design and detailed control of properties. In this work, we studied a series of single-metal atom Fe model systems with ligands that are commonly used as MOF linkers and tried to understand how one can design an optimal Fe catalyst. We found linear relationships between the binding enthalpy of oxygen to the Fe sites and common descriptors for catalytic reactions, such as the Fe 3d energy levels in different reaction intermediates. We further analyzed the three highest-barrier steps in the ethane oxidation cycle (including desorption of the product) with the Fe 3d energy levels. Volcano relationships are revealed with peaks toward higher Fe 3d energy and stronger electron-donating group functionalization of linkers. Furthermore, we found that the Fe 3d energy levels positively correlate with the electron-donating strength of functional groups on the linkers. Finally, we validated our hypotheses on larger models of MOF-74 iron sites. Compared with MOF-74, functionalizing the MOF-74 linkers with NH

We report the performance of UiO-66 and its Bronsted acid functionalized derivative, UiO-66-(COOH)2, as heterogeneous catalysts for levulinic acid esterification with ethanol. Importantly, compared...

We demonstrate the use of gas phase metal hydroxide clusters to identify descriptors and generate scaling relationships for predicting catalytic performances of porphyrin-supported metal hydroxide catalysts. Using the gas phase clusters for these purposes takes just 5 % of the time that would have been required if the porphyrin-supported models had been used.

Catalytic activity for acyl transfer from N-acetylimidazole (NAI) to different pyridylcarbinol (PC) regioisomers (2-PC, 3-PC, and 4-PC) is demonstrated for a set of topologically diverse, zirconium-based (porphinato)zinc metal-organic frameworks (MOFs). The MOFs studied are PCN-222, MOF-525, and NU-902, which are based on the csq, ftw, and scu topologies, respectively. The experimentally obtained reaction kinetics are discussed in light of molecular modeling results. The catalytic activity is shown to vary across the series of MOFs due to the different extent to which each topology facilitates reactant preconcentration and alignment of PC and NAI via coordination to framework porphyrin sites (orientation effects). Trends of experimental initial reaction rates with MOF topology and PC regioisomer are consistent with preconcentration effects, which depend on the number of porphyrin sites per volume of MOF, as well as with orientation effects, which depend on the number of porphyrin pairs per volume of MOF that bind PC and NAI in such a way that they are primed to form the required transition state. The present work shows how the proper alignment of catalytic linkers can enhance reaction rates in MOFs.

Summary The immobilization of enzymes on or in solid supports is crucial for the industrialization of enzymes as chemical catalysts because immobilization provides stabilization, easy separation, and recyclability. Here, we show that a water-stable metal-organic framework, NU-1000, with hierarchical pore structure has the right combination of properties to be particularly well-suited as a scaffold for immobilizing enzymes such that they maintain full enzymatic catalytic activity. The immobilized enzyme shows greater resistance to organic solvent and denaturant than does the free enzyme and is characterized by greater reactant accessibility and higher activity than the same enzyme encapsulated in topologically simpler metal-organic frameworks. These findings suggest design rules for hierarchical pore structuring of host frameworks for enzyme-encapsulation applications by demonstrating enzyme immobilization in a solid support whereby the enzyme is highly accessible and retains catalytic activity under chemically challenging conditions.

Converting CO2 into valuable C1 products such as CO, methanol, and methane using photocatalysts is an attractive way to recycle atmospheric CO2 into fine chemicals and fuels. The most commonly studied photocatalyst, TiO2, however, suffers from poor initial adsorption of CO2. To overcome this problem, it has been proposed that a thin overlayer of a basic oxide might promote CO2 adsorption and thus improve the reactivity of TiO2 for photoreduction of CO2. In this work, we investigated CO2 adsorption on the (100) surfaces of a series of basic, alkaline-earth metal oxides (MgO, CaO, SrO, BaO). Using periodic density functional theory (DFT) calculations, we found that CO2 adsorption becomes significantly more favorable in the order MgO < CaO < SrO < BaO, and we attribute this order to the more suitable lattice parameter of BaO compared to MgO. To understand the effect of a thin layer of basic oxide on TiO2 for CO2 photoreduction, SrO on TiO2 was investigated as a model system. A dramatic improvement in CO2 adsorption and activation was observed on SrO/TiO2 compared to the bare TiO2, and dissociated water was found to be thermodynamically more favorable than intact water on the SrO/TiO2 surface. A possible reaction route for the photocatalytic reduction of CO2 to CO on the bare and SrO-modified TiO2 surfaces was further investigated. Although the reaction is slightly more favorable on the TiO2 surface than on the 0.5 ML SrO-covered TiO2, the SrO half layer helps activate CO2 and favors desorption of CO, which are challenging steps for CO2 reduction on pure TiO2. Therefore, our results suggest that

A kinetic analysis of gas-phase cyclohexene epoxidation by H 2 O 2 over mesoporous TS-1 was performed. The production of cyclohexene oxide was very stable with high selectivity. Based on the kinetic analysis, the gas-phase mechanism is proposed to be similar to that of the liquid-phase reaction: an Eley–Rideal type mechanism, in which the reaction between a Ti–OOH intermediate and the physisorbed alkene is the rate-determining step. When the partial pressure of water or H 2 O 2 was varied, a compensation effect was observed. Based on the kinetic model, the compensation effect is attributed to variations in the surface coverage of intermediates, specifically the competitive adsorption of water and H 2 O 2 at the Ti active sites. A meaningful activation energy can only be obtained at high surface coverages of H 2 O 2 and was determined to be 40 ± 2 kJ/mol.

An isoreticular series of metal-organic frameworks (MOFs) with the ftw topology based on zirconium oxoclusters and tetracarboxylate linkers with a planar core (NU-1101 through NU-1104) has been synthesized employing a linker expansion approach. In this series, NU-1103 has a pore volume of 2.91 cc g(-1) and a geometrically calculated surface area of 5646 m(2) g(-1), which is the highest value reported to date for a zirconium-based MOF and among the largest that have been reported for any porous material. Successful activation of the MOFs was proven based on the agreement of pore volumes and BET areas obtained from simulated and experimental isotherms. Critical for practical applications, NU-1103 combines for the first time ultrahigh surface area and water stability, where this material retained complete structural integrity after soaking in water. Pressure range selection for the BET calculations on these materials was guided by the four so-called "consistency criteria". The experimental BET area of NU-1103 was 6550 m(2) g(-1). Insights obtained from molecular simulation suggest that, as a consequence of pore-filling contamination, the BET method overestimates the monolayer loading of NU-1103 by ∼16%.

A new functionalization technique, solvent-assisted ligand incorporation (SALI), was developed to efficiently incorporate carboxylate-based functionalities in the Zr-based metal-organic framework, NU-1000. Unlike previous metal node functionalization strategies, which utilize dative bonding to coordinatively unsaturated metal sites, SALI introduces functional groups as charge compensating and strongly bound moieties to the Zr6 node. Utilizing SALI, we have efficiently attached perfluoroalkane carboxylates of various chain lengths (C1-C9) on the Zr6 nodes of NU-1000. These fluoroalkane-functionalized mesoporous MOFs, termed herein SALI-n, were studied experimentally and theoretically as potential CO2 capture materials.

We describe the incorporation of a bistable mechanically interlocked molecule (MIM) into a robust Zr-based metal-organic framework (MOF), NU-1000, by employing a post-synthetic functionalization protocol. On average, close to two bistable [2]catenanes can be incorporated per repeating unit of the hexagonal channels of NU-1000. The reversible redox-switching of the bistable [2]catenanes is retained inside the MOF, as evidenced by solid-state UV-vis-NIR reflectance spectroscopy and cyclic voltammetry. This research demonstrates that bistable MIMs are capable of exhibiting robust dynamics inside the nanopores of a MOF.

Porous metal-organic frameworks (MOFs) have been studied in the context of a wide variety of applications, particularly in relation to molecular storage and separation sciences. Recently, we reported a green, renewable framework material composed of γ-cyclodextrin (γ-CD) and alkali metal salts--namely, CD-MOF. This porous material has been shown to facilitate the separation of mixtures of alkylaromatic compounds, including the BTEX mixture (benzene, toluene, ethylbenzene, and the regioisomers of xylene), into their pure components, in both the liquid and gas phases, in an energy-efficient manner which could have implications for the petrochemical industry. Here, we report the ability of CD-MOF to separate a wide variety of mixtures, including ethylbenzene from styrene, haloaromatics, terpinenes, pinenes and other chiral compounds. CD-MOF retains saturated compounds to a greater extent than their unsaturated analogues. Also, the location of a double bond within a molecule influences its retention within the extended framework, as revealed in the case of the structural isomers of pinene and terpinine, where the isomers with exocyclic double bonds are more highly retained than those with endocyclic double bonds. The ability of CD-MOF to separate various mono- and disubstituted haloaromatic compounds appears to be controlled by both the size of the halogen substituents and the strength of the noncovalent bonding interactions between the analyte and the framework, an observation which has been confirmed by molecular simulations. Since CD-MOF is a homochiral framework, it is also able to resolve the enantiomers of chiral analytes, including those of limonene and 1-phenylethanol. These findings could lead to cheaper and easier-to-prepare stationary phases for HPLC separations when compared with other chiral stationary phases, such as CD-bonded silica particles.

A previously known class of porous coordination polymer (PCP) of formula [Cu(bpy-n)(2)(SiF(6))] (bpy-1 = 4,4'-bipyridine; bpy-2 = 1,2-bis(4-pyridyl)ethene) has been studied to assess its selectivity toward CO(2), CH(4), N(2), and H(2)O. Gas sorption measurements reveal that [Cu(bpy-1)(2)(SiF(6))] exhibits the highest uptake for CO(2) yet seen at 298 K and 1 atm by a PCP that does not contain open metal sites. Significantly, [Cu(bpy-1)(2)(SiF(6))] does not exhibit particularly high uptake under the same conditions for CH(4), N(2), and, H(2)O, presumably because of its lack of open metal sites. Consequently, at 298 K and 1 atm [Cu(bpy-1)(2)(SiF(6))] exhibits a relative uptake of CO(2) over CH(4) of ca. 10.5:1, the highest value experimentally observed in a compound without open metal sites. [Cu(bpy-2)(2)(SiF(6))] exhibits larger pores and surface area than [Cu(bpy-1)(2)(SiF(6))] but retains a high CO(2)/CH(4) relative uptake of ca. 8:1.

The mechanism of the NOx reduction reaction on BaNaY zeolite using acetic acid/acetate as a reductant has been explored using density functional theory. The elementary steps, the reaction intermediates, and the transition states were identified on a zeolite cluster consisting of 10 tetrahedral atoms (10T). The hydrogen abstraction reaction of acetic acid/acetate was identified as the rate-determining elementary step at 473 K. The long-range electrostatic effect of the lattice on the rate-determining step was studied on expanded 24T, 30T, 34T, 40T, 44T, and 50T zeolite clusters. It was found that while acetate may be greatly stabilized on the expanded clusters with additional Na+ cations and Al atoms, the stabilization of acetic acid is much less affected by the long-range lattice effect. The reaction barrier of the hydrogen abstraction reaction, on the other hand, is less sensitive to the long-range lattice effect. The results of this paper highlight the importance of long-range electrostatic effects on t...

Experimental results in the literature show that two metal-organic frameworks (MOFs) containing copper and cobalt nodes are active for hydroperoxide decomposition, which is an important reaction in auto-oxidation processes. Density functional theory (DFT) calculations reported here for these systems suggest that the metal sites in the interior of these MOFs are not the active sites for this type of reaction due to the steric effects of the adjacent linkers. This implies that the experimental catalysis observed may occur on the exterior surface of the MOF crystals. Additional calculations with a copper paddlewheel node show that, despite being able to form complexes with hydroperoxides, the metal sites in copper paddlewheels do not catalyze hydroperoxide decomposition. Preliminary calculations involving undercoordinated metal atoms as a model for metal sites on the MOF exterior crystal surface suggest that these sites could be catalytically active.

The development of new microporous materials for adsorption separation processes is a rapidly growing field because of potential applications such as carbon capture and sequestration (CCS) and purification of clean-burning natural gas. In particular, new metal-organic frameworks (MOFs) and other porous coordination polymers are being generated at a rapid and growing pace. Herein, we address the question of how this large number of materials can be quickly evaluated for their practical application in carbon dioxide separation processes. Five adsorbent evaluation criteria from the chemical engineering literature are described and used to assess over 40 MOFs for their potential in CO(2) separation processes for natural gas purification, landfill gas separation, and capture of CO(2) from power-plant flue gas. Comparisons with other materials such as zeolites are made, and the relationships between MOF properties and CO(2) separation potential are investigated from the large data set. In addition, strategies for tailoring and designing MOFs to enhance CO(2) adsorption are briefly reviewed.

Copper oxide catalysts supported on KIT-6 silica were evaluated for cyclohexane oxidative dehydrogenation (ODH) to determine the effects of copper oxide domain size on ODH activity and selectivity. The catalysts were prepared by incipient wetness impregnation of KIT-6 at copper surface densities spanning 0.01–0.7 Cu/nm2 with carefully controlled drying and calcination conditions to systematically vary the average local copper oxide domain size. A distinct copper oxide active site exhibiting an order of magnitude higher activity than large copper oxide domains was identified by model cyclohexane ODH studies coupled with in situ X-ray absorption and UV–visible spectroscopies during reduction in H2. The structure of this site is experimentally identified by a combination of extended X-ray absorption fine structure analysis, resonant Raman studies, and modeling by density functional theory. All constraints imposed by these techniques indicate the active site is a mono(μ-oxo)dicopper(II) structure with copper ...

Hybrid quantum mechanics/molecular mechanics (QM/MM) methods were employed to study electronic effects of 5,5'-substituents on the enantioselectivity of (salen)Mn catalysts. These methods were shown to effectively capture electronic effects of substituents if the substituents were treated with a simple electrostatic coupling using point charges. Correlations between calculated properties of (salen)Mn=O indicative of its reactivity and the modified Hammett constant σ + para were applied to study electronic framework effects on enantioselectivity for (salen)Mn heterogenized in a metal—organic framework (MOF). The results suggest that these effects are too small to account for all of the decrease in enantioselectivity observed experimentally and that steric constraints of the framework likely play a role. The reactivity correlations also enabled fast ligand screening for the prediction of highly enantioselective (salen)Mn catalysts that could be used in MOFs. A modified version of the DREIDING force field was also developed to allow QM/MM calculations of (salen)Mn species.

Experiments and microkinetic modeling were used to investigate the kinetics of styrene epoxidation catalyzed by (porphyrin)Mn using iodosylbenzene. While the kinetics follow the general form of Michaelis–Menten rate expressions as proposed in the literature, these simplified rate forms cannot capture all the details of the kinetics simultaneously, most notably catalyst deactivation. In contrast, a microkinetic model based on elementary steps, including deactivation via μ-oxo dimer formation and irreversible degradation, is able to capture experimental data over all reaction times and for different (porphyrin)Mn. Experimentally, we show that encapsulation of (porphyrin)Mn in a supramolecular cavity known as a molecular square significantly reduces catalyst deactivation, which is in agreement with previous experimental studies. Microkinetic modeling also captured the kinetics of this system. Net rate analysis revealed that production of epoxide was primarily due to encapsulated catalysts, and the model was able to quantify the difference in the concentration of deactivated catalyst with and without encapsulation.

Neutral and ionic pathways for aci-nitromethane decomposition were studied in the gas phase, and the Gibbs free energy surfaces were constructed at 473 K. The pathways studied were based on proposed mechanisms of NO(x) reduction by acetaldehyde over BaNaY zeolites. Density functional theory at the B3LYP/6-311++G(d,p) level of theory was used, and 29 stable intermediates and 39 transition states were identified and quantified. Plausible pathways involving unimolecular decomposition or NO(2) addition were both explored. The rate constants for all elementary steps were estimated using transition state theory, and kinetic modeling was carried out to identify the dominant reaction channel. For the ionic routes, one of the NO(2) addition pathways dominated at typical NO(2) concentrations. For the neutral routes, one of the unimolecular decomposition routes was dominant. A solvation model was then included to mimic the environment of the BaNaY zeolite catalyst in a simplified manner. While inclusion of solvation effects stabilized the ionic species significantly, the dominant reaction channels in both the neutral and ionic systems were not altered. Our results show that the addition of NO(2) facilitates the decomposition of aci-anion nitromethane.

Continuum-level modeling and Knudsen dynamics simulations were used to investigate the oxidative dehydrogenation of ethane in nanostructured membranes. Different operational modes were investigated, including pass-through and sweep-gas modes, and pores with total and partial catalyst coverage on the walls were studied. It was determined that by adjusting the aspect ratio (L/d) of the pore in the pass-through mode it is possible to achieve high conversions and yields even for slow reactions. On the other hand, in the sweep-gas mode, the velocity of the reaction limits the conversion and yield that can be achieved. It was also found that, under Knudsen diffusion, covering the wall of the pores only partially with catalyst could improve the per gram conversion obtained. However, it does not improve the selectivity achieved for a given conversion when compared to that obtained in a pore fully covered in catalyst.

Quantum chemical calculations were employed to develop a better understanding of the adsorption properties of BaNaY interacting with molecules relevant to deNOx catalysis. First, various basis sets and levels of theory were tested for barium-containing species and gas-phase reactions, and it was shown that the choice of the basis set for barium is critical. Density functional theory (DFT) with the B3LYP functional and SDD as the basis set was selected based on its combination of relative accuracy and speed. This level of theory was then used to calculate energies, geometries, and frequencies for acetaldehyde, acetic acid, nitromethane, and water adsorbed and in the gas phase. The predicted properties were compared to experiment where available and reasonable agreement was found. To study the effect of the zeolite framework on the adsorption properties, the size of the zeolite cluster was increased from 6 T to 36 T to 96 T using the embedded ONIOM method. Inclusion of van der Waals interactions with increasing cluster size only changed the adsorption enthalpy by a small amount for all of the adsorbates studied. It was found that the interaction between the empty 6s orbital of Ba and the lone pair orbital of the oxygen atom in the adsorbed state, revealed by natural bond orbital analysis, correlates with the adsorption enthalpy and the gas-phase charge of the oxygen atom that interacts with Ba.