Search

Objective: To compare the results of cardiac output measurements obtained by lithium dilution and transpulmonary thermodilution in paediatric patients., Design: A prospective study., Setting: Paediatric intensive care unit in a university teaching hospital., Patients: Twenty patients (age 5 days-9 years; weight 2.6-28.2 kg) were studied., Interventions: Between two and four comparisons of lithium dilution cardiac output (LiDCO) and transpulmonary thermodilution (TPCO) were made in each patient., Measurements and Results: Results from three patients were excluded: in one patient there was an unsuspected right-to-left shunt, in two patients there was a problem with blood sampling through the lithium sensor. There were 48 comparisons of LiDCO and TPCO in the remaining 17 patients over a range of 0.4-6 l/min. The mean of the differences (LiDCO-TPCO) was -0.1 +/- 0.3 (SD) l/min. Linear regression analysis gave LiDCO = 0.11 + 0.90 x TPCO l/min (r2 = 0.96). There were no adverse effects in any patient., Conclusions: These results suggest that the LiDCO method can be used to provide safe and accurate measurement of cardiac output in paediatric patients. The method is simple and quick to perform, requiring only arterial and venous catheters, which will already have been inserted for other reasons in these patients.

Objective: To assess the suitability of lithium dilution as a method for measuring cardiac output in anesthetized horses, compared with thermodilution and transesophageal Doppler echocardiography., Animals: 6 horses (3 Thoroughbreds, 3 crossbreeds)., Procedure: Cardiac output was measured in 6 anesthetized horses as lithium dilution cardiac output (LiDCO), thermodilution cardiac output (TDCO), and transesophageal Doppler echocardiographic cardiac output (DopplerCO). For the LiDCO measurements, lithium chloride was administered i.v., and cardiac output was derived from the arterial lithium dilution curve. Sodium nitroprusside, phenylephrine hydrochloride, and dobutamine hydrochloride were used to alter cardiac output. Experiments were divided into 4 periods. During each period, 3 LiDCO measurements, 3 DopplerCO measurements, and 3 sets of 3 TDCO measurements were obtained., Results: 70 comparisons were made between LiDCO, DopplerCO, and triplicate TDCO measurements over a range of 10 to 43 L/min. The mean (+/- SD) of the differences of LiDCO - TDCO was -0.86 +/- 2.80 L/min; LiDCO = -1.90 + 1.05 TDCO (r = 0.94). The mean of the differences of DopplerCO - TDCO was 1.82 +/- 2.67 L/min; DopplerCO = 2.36 + 0.98 TDCO (r = 0.94). The mean of the differences of LiDCO - DopplerCO was -2.68 +/- 3.01 L/min; LiDCO = -2.53 + 0.99 DopplerCO (r = 0.93)., Conclusions and Clinical Relevance: These results indicate that lithium dilution is a suitable method for measuring cardiac output in horses. As well as being accurate, it avoids the need for pulmonary artery catheterization and is quick and safe to use. Monitoring cardiac output during anesthesia in horses may help reduce the high anesthetic mortality in this species.

Objective: We have previously described an indicator dilution technique of measuring cardiac output in which lithium chloride is injected as a bolus via a central venous catheter and cardiac output derived from the arterial lithium dilution curve recorded from a lithium-selective electrode, which we have developed for this purpose. It would be an advantage if the lithium could be injected via the basilic vein (in the antecubital fossa) in those patients who do not need central venous catheterisation for other reasons. We have therefore compared cardiac output measurements made using these two routes of lithium chloride administration., Methods: Lithium dilution cardiac output was measured 10 times in each of 10 patients, injecting the lithium chloride alternately via the basilic or central venous catheter., Results: The mean difference was 0.8 +/- 5.2% (SD) (range -8.5 to +7.0%) over a range of cardiac output of 4.5-13 l/min., Conclusions: Injection of lithium chloride via the basilic vein in the antecubital fossa allows accurate lithium dilution cardiac output measurements to be made in patients who do not have central venous catheters in place.

A new indicator dilution technique is described for measuring cardiac output and shunt fraction in patients undergoing venovenous extracorporeal membrane oxygenation (ECMO). Shunt fraction is the proportion of the ECMO pump flow which recirculates through the ECMO circuit (passing directly from the inflow cannula to the outflow cannula) instead of flowing through the pulmonary and systemic circulations. The indicator is an isotonic (150 mmol/l) solution of lithium chloride which is injected into the ECMO flow returning to the patient. Two lithium sensors are used simultaneously to record the resulting lithium dilution curves in arterial blood and in the blood in the ECMO circuit. Cardiac output and shunt fraction are derived from these curves. The techniques, which is simple and safe, provides measurements that allow optimal adjustment of ECMO flow and cardiovascular support.

Objective: To evaluate, in vitro, a method of measuring cardiac output and shunt fraction during venovenous extracorporeal membrane oxygenation (ECMO)., Design: Experimental study using an in vitro model., Setting: A teaching hospital., Model: An ECMO circuit was set up in parallel with a patient circuit consisting of tubing through which saline was circulated from a 50-L reservoir by a pump which was set at 3 L/min to represent cardiac output. A second pump in the ECMO circuit drew saline from the patient circuit and passed it through a membrane oxygenator. The flow from the membrane oxygenator either returned directly to the patient circuit or was diverted, via a third pump, back into the ECMO circuit, thereby producing a shunt., Interventions: By adjusting the flow rates of the second (ECMO) and third (shunt) pumps, three shunt fractions of 12%, 25%, and 50% were produced at three different ECMO flow rates. Lithium chloride (0.15 mmol) was injected just downstream of the membrane oxygenator; the lithium ion concentration-time curves were recorded simultaneously in the flow returning to the saline reservoir and in the flow just upstream of the membrane oxygenator using lithium selective electrodes., Measurements and Main Results: Nine pairs of curves were recorded, one pair for each combination of ECMO and shunt flow rates. Analysis of these curves allowed shunt flow and "cardiac output" to be calculated and compared with the flow rates delivered by the pumps. Mean "cardiac output" derived from the lithium dilution curves was 2.98 +/- 0.18 (SD) L/min, compared with a delivered pump flow of 3 L/min. Measured shunt flow = 0.008 + 1.09 x actual shunt flow (R = 0.997)., Conclusions: This method would allow cardiac output and shunt flow to be measured in patients undergoing venovenous ECMO. It could result in better patient management and improved cannula design.

Objective: To compare the results of cardiac output measurements obtained by lithium dilution and thermodilution., Design: Case series, observational study., Setting: High-dependency postoperative unit and intensive care unit of a teaching hospital., Patients: Forty patients were studied. Thirty-four patients had undergoing heart surgery requiring cardiopulmonary bypass within the previous 2 days; the diagnoses in the other patients were myocardial infarct (n = 2), septicemia (n = 2), adult respiratory distress syndrome, and pericardectomy., Interventions: Cardiac output was measured five times in each patient, using lithium dilution (single measurement) and bolus thermodilution (series of three to six measurements according to standard clinical practice, taking the average of the closest three). In a subgroup of 14 patients, cardiac output was also measured using "continuous thermodilution.", Measurements and Main Results: Comparing lithium dilution with bolus thermodilution, the mean of the differences (lithium dilution-thermodilution) was -0.25 +/- 0.46 [SD] L/min. Linear regression analysis gave y = 0.31 + 0.89x (r2 = .94) for lithium dilution vs. thermodilution., Conclusions: The overall agreement between the two methods was good. The variability of the thermodilution measurements was greater than that of the lithium dilution measurements. The lithium dilution method is at least as accurate as bolus thermodilution and, since pulmonary artery catheterization is not needed, it has the advantages of being safe and quick to perform.

1. In six patients arterial plasma lithium concentration-time curves were recorded following injection of lithium chloride into the right or left atrium. 2. Lognormal curve fitting was used to derive the areas under the first pass dilution curves. 3. Subjecting the curves produced by left atrial injection to a delay and sequential filtering produced curves that closely approximated those produced by right atrial injection. 4. We conclude that the transfer function of the right heart and lungs is equivalent to a delay and sequential filtering, that the primary indicator dilution curve is closely approximated by a lognormal curve and that loss of lithium in the lungs following right atrial injection is clinically insignificant.

We describe a new indicator dilution method of measuring cardiac output in man. A bolus injection of lithium chloride 0.6 mmol was given via a central venous catheter and arterial plasma [Li+] recorded using a specially developed sensor incorporating an Li(+)-selective electrode. Cardiac output was derived from the lithium dilution curve, with a correction for packed cell volume. Lithium dilution cardiac output (LiDCO) was compared with thermodilution cardiac output (TD) using 22 lithium sensors in nine patients. For each sensor, one LiDCO was measured immediately before and one immediately after three TD estimations and mean values of LiDCO and TD derived. The correlation coefficient, r, was 0.89; slope of the regression 0.84; y intercept 0.72; bias 0.3 (0.5) litre min-1 (mean (TD-LiDCO) (1 SD). LiDCO appeared to be a safe, simple and accurate technique which does not require insertion of a pulmonary artery catheter.