Search

More accurate global volumetric estimations of shallow-water reef deposits are needed to better inform climate and carbon cycle models. Using recently acquired datasets and International Ocean Discovery Program (IODP) Expedition 325 cores, we calculated shallow-water CaCO3 volumetrics and mass for the Great Barrier Reef region and extrapolated these results globally. In our estimates, we include deposits that have been neglected in global carbonate budgets: Holocene Halimeda bioherms located on the shelf, and postglacial pre-Holocene (now) drowned coral reefs located on the shelf edge. Our results show that in the Great Barrier Reef alone, these drowned reef deposits represent ca. 135 Gt CaCO3, comparatively representing 16–20% of the younger Holocene reef deposits. Globally, under plausible assumptions, we estimate the presence of ca. 8100 Gt CaCO3 of Holocene reef deposits, ca. 1500 Gt CaCO3 of drowned reef deposits and ca. 590 Gt CaCO3 of Halimeda shelf bioherms. Significantly, we found that in our scenarios the periods of pronounced reefal mass accumulation broadly encompass the occurrence of the Younger Dryas and periods of CO2 surge (14.9–14.4 ka, 13.0–11.5 ka) observed in Antarctic ice cores. Our estimations are consistent with reef accretion episodes inferred from previous global carbon cycle models and with the chronology from reef cores from the shelf edge of the Great Barrier Reef. [ABSTRACT FROM AUTHOR]

The calcareous Halimeda bioherms of the northern Great Barrier Reef, Australia are the largest actively accumulating Halimeda deposits worldwide. They contribute a substantial component of the Great Barrier Reef neritic carbonate factory, as well as the geomorphological development of Australia's northeast continental shelf. Halimeda bioherm geomorphology is complex, expressing three distinct variations in morphotype patterns: annulate, reticulate and undulate. Similar regular and irregular geomorphological patterning often results from scale‐dependent biophysical feedback mechanisms. Therefore, a better understanding of morphotype differentiation can inform the biotic and abiotic drivers of spatial heterogeneity in the bioherm ecosystem. Here, 3D LiDAR bathymetry is integrated with 2D sub‐bottom profile datasets to investigate surface topography and internal sedimentary architecture of Halimeda bioherms through space and time. Using the ESRI ArcGIS 3D Analyst and Benthic Terrain Modeller extensions, the bioherm surface and subsurface geomorphometric characteristics were quantified for the annulate, reticulate and undulate morphotypes. Significant variation was found between the three bioherm morphotypes in their surface topography, internal structure, volume, slope gradients and terrain complexity. Therefore, their geomorphology is probably influenced by differing processes and biophysical feedback mechanisms. The complex surface topography does not appear to be inherited from the antecedent substrate, and preferred aspect orientations resulting from hydrodynamic forcing appear to be limited. It is suggested here that autogenic dynamics or biotic self‐organization similar to patterns and processes in other marine organo‐sedimentary systems modulates Halimeda bioherm geomorphology, and some hypotheses are offered towards future studies. Morphotype differentiation has implications for the development of the Halimeda bioherm carbonate factory, rates of sediment aggradation and progradation, and variable capacity to fill accommodation space. Self‐organization dynamics and morphology differentiation in Modern bioherm systems could potentially inform palaeo‐environmental interpretations of fossil bioherms and phylloid algal mounds on geological timescales. [ABSTRACT FROM AUTHOR]

During the Cretaceous, high global sea‐level and low latitudinal temperature variations led to the growth of epeiric carbonate platforms. Platform‐scale dolomitization of these platforms is not common, reflecting the low Mg/Ca ratio of seawater and a humid climate. This study describes the processes governing pervasive dolomitization of a land‐attached carbonate platform within the Iberian Basin. Dolomite is planar to sub‐planar with a geochemical signature consistent with dolomitization from penesaline seawater. Dolomitization was most pervasive during a 1 Myr period in the middle Cenomanian, by repeated reflux of seawater from brine pools formed on the top of a southward‐prograding carbonate platform. Tilting and structural reorganization in the Upper Cenomanian led to a reversal in polarity of the platform, and dolomitization was restarted by the northward reflux of seawater. Rising relative sea‐level and oceanic acidification led to back‐stepping of the platform such that the supply of dolomitizing fluids was cut off. In the Lower Turonian, pervasively dolomitized rudist rudstone facies in the south of the study area indicate that dolomitization restarted, either penecontemporaneously or later, from highly evaporated Campanian–Maastrichtian seawater. A systematic increase in dolomite crystal size up‐section ties broadly, but not entirely, to stratigraphy. It is possible that these textural differences reflect changes in fluid chemistry, limestone permeability or precursor rock texture. However, the lack of stratigraphic conformance, and the preservation of the earliest‐formed dolomite only in the oldest sediments, could indicate a progressive recrystallization of early‐formed dolomite through repeated reflux of brines. As such, the succession appears to preserve a fossilized record of dolomite recrystallization through time during the Cenomanian–Turonian. The results of this study therefore provide a record of the progressive dolomitization of a carbonate platform and demonstrate the important interplay of climate and basin‐scale tectonics on dolomite distribution and crystallinity. [ABSTRACT FROM AUTHOR]

Tectonic processes are widely considered as a mechanism causing carbonate platform margin instabilities leading to the emplacement of mass transport deposits and calciturbidites. However, only few examples establishing a clear link between tectonics and re‐sedimentation processes are known from the literature. The two‐dimensional and three‐dimensional wire‐cut walls of hundreds of quarries extracting ornamental limestones (for example, Perlato di Sicilia) from the Western Sicily Cretaceous Escarpment in Italy expose a series of mass transport deposits. The depositional architecture, spatial facies distribution and sedimentary features of these deposits were studied in detail. Thin section analysis was used to define the microfacies characteristics and to determine the age of the re‐sedimented limestones. Eleven facies types grouped into four facies associations were recognized that defined specific depositional processes and environments. The stratigraphic architecture of the slope was reconstructed using four composite facies successions based on the detailed analysis and correlation of the field sections. The palaeoslope orientation was reconstructed based on the analysis of synsedimentary faults, slump scars and pinch‐out geometries. The Western Sicily Cretaceous Escarpment was strongly influenced by synsedimentary transtensional tectonics in combination with magmatic processes, as suggested by the presence of tuffites and pillow lava intercalations within the re‐sedimented carbonate series. These volcanics point to a major role of crustal shear as a trigger for mass transport deposit emplacement. The facies distribution along the Western Sicily Cretaceous Escarpment delivers new insights into the deformation processes accompanying the crustal extension of the Cretaceous western Tethys realm. [ABSTRACT FROM AUTHOR]

Late Mississippian carbonates in southern Montagne Noire are dominantly domical to laterally‐accreted microbial mounds in some formations, as well as stratiform microbial limestones occurring in hundreds of olistoliths within a flysch basin, constituting pieces of a giant puzzle that are used to help reconstruct a platform in a region that is no longer preserved. Petrographic data of limestone samples from 14 continuous long sections of olistoliths have been analyzed statistically, using multivariate clustering (Q‐mode) of the components/matrix/cement and canonical correspondence analysis that allow the reconstruction of the environmental parameters of carbonate microbial communities in space and time. Clustering analysis separated microbial and non‐microbial facies. The calculation of indices along the various axes from canonical correspondence analysis allows recognition of the controlling factors of the mounds and microbial growth as being turbidity, light penetration, bathymetry and storms. Turbidity and light penetration are the primary factors controlling the morphology of the microbial limestones. Representation of the light penetration and bathymetry indices on the stratigraphical sections defines two vertical environmental gradients. Light penetration can be subdivided into euphotic, euphotic–dysphotic and dysphotic‐aphotic conditions. The representation of the bathymetry allows the subdivision of samples into a deeper outer ramp, external mid‐ramp and internal mid‐ramp. The curve distance from the section base = f (index) suggests a cyclicity for the platform that cannot be compared with the onlap curve defined from other cratonic areas (Moscow Basin), and thus the cyclic succession of the Montagne Noire is interpreted to have been mostly tectonically‐controlled. Integration of the data allowed the reconstruction of the original Mississippian carbonate platform, where, up to the Mikhailovian, it appears to correspond to a platform morphology, with narrow shallow water facies and wide turbiditic systems, whereas the width of shallow‐water settings expanded during the Venevian to the Protvian, forming a ramp or distally‐steepened ramp with widespread microbial limestones. [ABSTRACT FROM AUTHOR]

A seismic stratigraphy analysis was conducted at two sites, Hydrographers and Noggin passages, separated by about 540 km on the shelf-edge of the central Great Barrier Reef (GBR), Australia. We used recently available seismic and bathymetry data and a new synthesis of downhole logs and lithological, petrophysical and radiometric data from cores recovered by the Integrated Ocean Drilling Program Expedition 325 (Great Barrier Reef Environmental Changes). We compared the stratigraphy of both sites, identifying a full depositional sequence with deposits from at least 28 ka BP to ~ 7 ka BP, bounded by two marine flooding surfaces. Within this sequence, each systems tract is represented by unique depositional features characteristic of the shelf-edge systems. Despite the broad environmental and geomorphic similarities between the two sites, differences in postglacial reef development were remarkable. These contrasts can be explained as a result of: (1) local antecedent substrate variations and (2) the interplay of shelf physiography with Late Quaternary sea level fluctuations, which favoured changes in biological production and sediment flux as the palaeo-shoreline evolved from linear to complex during intermediate sea levels. During these intermediate sea levels, the northern estuarine coast and its steep substrate at shelf-edge locations contrasted strongly with the protected palaeo-lagoons and the extensive, gentle marginal terraces found at the southern central GBR. This setting enhanced the regional differences in sediment transport and reef development through the last transgression. The conceptual model presented here provides a broader depositional framework and improves the understanding of the main processes controlling the spatial and temporal depositional patterns on the shelf-edge of mixed siliciclastic-carbonate margins. [ABSTRACT FROM AUTHOR]

Relative sea-level rise has been a major factor driving the evolution of reef systems during the Holocene. Most models of reef evolution suggest that reefs preferentially grow vertically during rising sea level then laterally from windward to leeward, once the reef flat reaches sea level. Continuous lagoonal sedimentation ("bucket fill") and sand apron progradation eventually lead to reef systems with totally filled lagoons. Lagoonal infilling of One Tree Reef (southern Great Barrier Reef) through sand apron accretion was examined in the context of late Holocene relative sea-level change. This analysis was conducted using sedimentological and digital terrain data supported by 50 radiocarbon ages from fossil microatolls, buried patch reefs, foraminifera and shells in sediment cores, and recalibrated previously published radiocarbon ages. This data set challenges the conceptual model of geologically continuous sediment infill during the Holocene through sand apron accretion. Rapid sand apron accretion occurred between 6000 and 3000 calibrated yr before present B.P. (cal. yr B.P.); followed by only small amounts of sedimentation between 3000 cal. yr B.P. and present, with no significant sand apron accretion in the past 2 k.y. This hiatus in sediment infill coincides with a sea-level fall of ~1-1.3 m during the late Holocene (ca. 2000 cal. yr B.P.), which would have caused the turn-off of highly productive live coral growth on the reef flats currently dominated by less productive rubble and algal flats, resulting in a reduced sediment input to back-reef environments and the cessation in sand apron accretion. Given that relative sea-level variations of ~1 m were common throughout the Holocene, we suggest that this mode of sand apron development and carbonate production is applicable to most reef systems. [ABSTRACT FROM AUTHOR]

Physical properties such as bulk density (gamma ray attenuation), P-wave velocity (primary or compressional wave acoustic velocity), electrical resistivity and magnetic susceptibility are related to characteristics of the marine sediments that, in turn, are indicative of the lithology. Non-destructive physical properties are routinely measured during Mission Specific Platform expeditions conducted by the Integrated Ocean Drilling Program using a multi-sensor core logger on whole cores. The goal of this study was to develop linear and non-linear relations among physical properties and different types of carbonate sediment to identify relevant information that may aid in the classification of carbonates. The database and model presented here integrate sedimentology with physical properties data. Data were analysed using three techniques: Linear Discriminant Analysis, Random Forest and Support Vector Machines. The models that best describe the nature of the data are Random Forest and Support Vector Machines, reaching up to 79% and 74% total accuracy, respectively. This article presents an application of machine learning as a potentially useful tool for classifying sediment types, developed specifically for assisting with the challenging identification of the lithologies in coral cores. This technique can also be used for provisional core description prior to splitting, thereby enabling identification and preservation of potentially critical intervals for special analyses and studies. These methods of data analysis can also assist with sample selection for specific studies. Other applications include the interpretation of lithotypes from wireline geophysical logging data, particularly in boreholes where core recovery is poor or sampling is limited to drill cuttings. [ABSTRACT FROM AUTHOR]

Abstract: Late Pleistocene to Holocene margin sedimentation on the Great Barrier Reef, a mixed carbonate-siliciclastic margin, has been explained by a transgressive shedding model. This model has challenged widely accepted sequence stratigraphic models in terms of the timing and type of sediment (i.e. carbonate vs. siliciclastic) deposited during sea-level oscillations. However, this model documents only hemipelagic sedimentation and the contribution of coarse-grained turbidite deposition, and the role of submarine canyons in this process, remain elusive on this archetypal margin. Here we present a new model of turbidite deposition for the last 60 ky in the north-eastern Australia margin. Using high-resolution bathymetry, 58 new and existing radiometric ages, and the composition of 81 turbidites from 15 piston cores, we found that the spatial and temporal variation of turbidites is controlled by the relationship between sea-level change and the variable physiography along the margin. Siliciclastic and mixed carbonate-siliciclastic turbidites were linked to canyons indenting the shelf-break and the well-developed shelf-edge reef barriers that stored sediment behind them. Turbidite deposition was sustained while the sea-level position allowed the connection and sediment bypassing through the inter-reef passages and canyons. Carbonate turbidites dominated in regions with more open conditions at the outer-shelf and where slope-confined canyons dominated or where canyons are generally less abundant. The turn-on and maintenance of carbonate production during sea-level fluctuations also influenced the timing of carbonate turbidite deposition. We show that a fundamental understanding of the variable physiography inherent to mixed carbonate-siliciclastic margins is essential to accurately interpret deep-water, coarse-grained deposition within a sequence stratigraphic context. [Copyright &y& Elsevier]

This error has now been corrected in the Supplementary Information 3 file that accompanies the original Article. Correction to: I Scientific Reports i https://doi.org/10.1038/s41598-021-04586-w, published online 18 January 2022 The Supplementary Information 3 file published with this Article contained an error where irrelevant data samples, incorrect or out-of-date references, and inconsistent notations obscured the results of the postglacial accretion trends and affected their reproducibility. [Extracted from the article]

Abstract: New high-resolution bathymetry, seismic reflection profiles, and existing sidescan data have revealed the presence of a series of submarine canyons in the slope off the Noggin Passage region, north-eastern Australia. The morphology of the Noggin Canyons contrasts with that of the canyons in the Ribbon Reef region, further north along the north-eastern Australia margin. The Noggin Canyons are mostly slope-confined, with canyon heads located at water depths between 200 and 400m. These narrow and straight canyons show a decrease in canyon relief with depth, and have incision values and canyon gradients lower than the Ribbon Reef Canyons. New findings on the Ribbon Reef Canyons reveal an increase of canyon relief with depth in the shelf-incised canyons, as well as complex relationships between geomorphic parameters, such as canyon gradient, incision, canyon width and canyon wall gradient. The main factors controlling the differences in canyon morphology are the shape of the continental slope and the presence of barrier reefs at the shelf-edge. Steep exponential and linear slope profiles, and the presence of an extensive shelf-edge barrier system in the Ribbon Reef region, are related to large shelf-incised canyons. In contrast, the slope-confined canyons of the Noggin region are linked to sigmoidal slopes, and more open outer-shelf conditions lacking barrier reefs. These conditions allow higher overall sediment supply to the upper slope, and the resulting formation of sigmoidal slope profiles. In the Ribbon Reef region, the physical barriers provided by the shelf-edge barrier reefs reduce the amount of shelf-to-basin sediment transport, thereby forming exponential slopes. Further, sediment gravity flow deposition through the canyons is more prominent in the Ribbon Reef region, as a direct consequence of the more frequent breaching of the shelf by the canyons, otherwise infrequent in the Noggin region. Our results highlight this particular relationship between canyon and slope morphology, and the importance of the variable shelf-edge morphology in controlling the shelf-to-basin sediment transport. This aspect is especially relevant for understanding the margin development in modern and ancient mixed carbonate-siliciclastic continental settings. [Copyright &y& Elsevier]

Abstract: Cores from slopes east of the Great Barrier Reef (GBR) challenge traditional models for sedimentation on tropical mixed siliciclastic-carbonate margins. However, satisfactory explanations of sediment accumulation on this archetypal margin that include both hemipelagic and turbidite sedimentation remain elusive, as submarine canyons and their role in delivering coarse-grained turbidite deposits, are poorly understood. Towards addressing this problem we investigated the shelf and canyon system bordering the northern Ribbon Reefs and reconstructed the history of turbidite deposition since the Late Pleistocene. High-resolution bathymetric and seismic data show a large paleo-channel system that crosses the shelf before connecting with the canyons via the inter-reef passages between the Ribbon Reefs. High-resolution bathymetry of the canyon axis reveals a complex and active system of channels, sand waves, and local submarine landslides. Multi-proxy examination of three cores from down the axis of the canyon system reveals 18 turbidites and debrites, interlayered with hemipelagic muds, that are derived from a mix of shallow and deep sources. Twenty radiocarbon ages indicate that siliciclastic-dominated and mixed turbidites only occur prior to 31ka during Marine Isotope Stage (MIS) 3, while carbonate-dominated turbidites are well established by 11ka in MIS1 until as recently as 1.2ka. The apparent lack of siliciclastic-dominated turbidites and presence of only a few carbonate-dominated turbidites during the MIS2 lowstand are not consistent with generic models of margin sedimentation but might also reflect a gap in the turbidite record. These data suggest that turbidite sedimentation in the Ribbon Reef canyons, probably reflects the complex relationship between the prolonged period (>25ka) of MIS3 millennial sea level changes and local factors such as the shelf, inter-reef passage depth, canyon morphology and different sediment sources. On this basis we predict that the spatial and temporal patterns of turbidite sedimentation could vary considerably along the length of the GBR margin. [Copyright &y& Elsevier]

Abstract: We present the most complete and new high-resolution multibeam bathymetry datasets from the shelf to the basin in the Ribbon Reef region, northern Great Barrier Reef (GBR). Analysis of these data, combined with existing side-scan sonar data provides a detailed morphologic framework of the submarine canyon system and other related features, their spatial distribution, controlling factors on their evolution, and evidence of recent sedimentary activity. Two morphologically different submarine canyon types are recognised: 1) shelf-incised canyons whose heads are indented into the shelf-break at shallow-water depths (about 60 to 80m). These canyons can be single-fed or multi-fed depending on the number of tributaries that merge into the main canyon valley. According to the degree of connection with the shelf, these canyons can be reef-blocked, partly reef-blocked or shelf-connected; 2) slope-confined canyons, which are located at deeper waters in the slope and show a different canyon head morphology. Canyon formation and development of the different canyon types is explained according to a four-phase model. In the first phase, localised slope failures and/or sediment gravity flows may lead to the formation of an initial canyon by retrogressive headward or downslope erosion respectively. These processes continue during the second transitional phase, leading to upslope canyon progression. Finally, canyons breach the shelf-break during a mature stage that represents the more active phase in the canyon evolution. The development of an extensive shelf-edge barrier reef (Ribbon Reefs) represents a fourth phase that conditioned the sedimentary dynamics of the canyons. The location and morphology of this reef barrier determine the type and amount of sediment supply by controlling the connection of the canyon head with the shelf drainage system. Recent canyon activity is evidenced by the presence of erosive and depositional features that include submarine landslides, gullies and rills on the canyon walls and slopes, sandwaves migrating along the canyons floors, and sediment gravity flows deposited on the lower canyons and adjacent basin floor. [Copyright &y& Elsevier]

Material cored during the Integrated Ocean Drilling Program (IODP) Expedition 310 'Tahiti Sea Level' revealed that the fossil reef systems around Tahiti are composed of two major stratigraphic sequences: (i) a last deglacial sequence; and (ii) an older Pleistocene sequence. The older Pleistocene carbonate sequence is composed of reef deposits associated with volcaniclastic sediments and was preserved in Hole 310-M0005D drilled off Maraa. Within an approximately 70-m-thick older Pleistocene sequence (33.22-101.93 m below seafloor; 92.85-161.56 m below present sealevel) in this hole, 11 depositional units are defined by lithological changes, sedimentological features, and paleontological characteristics and are numbered sequentially from the top of the hole downward (Subunits P1-P11). Paleowater depths inferred from nongeniculate coralline algae, combined with those determined by using corals and larger foraminifers, suggest two major sealevel rises during the deposition of the older Pleistocene sequence. Of these, the second sealevel rise is associated with an intervening sealevel drop. It is likely that the second sealevel rise corresponds to that during Termination II (TII, the penultimate deglaciation, from Marine Isotope Stages 6 to 5e). Therefore, the intervening sealevel drop can be correlated with that known as the 'sealevel reversal' during TII. Because there are limited data on the Pleistocene reef systems in the tropical South Pacific Ocean, this study provides important information about Pleistocene sealevel history, the evolution of coral reef ecosystems, and the responses of coral reefs to Quaternary climate changes. [ABSTRACT FROM AUTHOR]

Abstract: A series of well-developed submerged coral reefs are preserved in the Huon Gulf (Papua New Guinea) and around Hawaii. Despite different tectonics settings, both regions have experienced rapid subsidence (2–6 m/ka) over the last 500 ka. Rapid subsidence, combined with eustatic sea-level changes, is responsible for repeated drowning and backstepping of coral reefs over this period. Because we can place quantitative constraints on these systems (i.e., reef drowning age, eustatic sea-level changes, subsidence rates, accretion rates, basement substrates, and paleobathymetry), these areas represent unique natural laboratories for exploring the roles of tectonics, reef accretion, and eustatic sea-level changes in controlling the evolution of individual reefs, as well as backstepping of the entire system. A review of new and existing bathymetric, radiometric, sedimentary facies and numerical modeling data indicate that these reefs have had long, complex growth histories and that they are highly sensitive, recording drowning not only during major deglaciations, but also during high-frequency, small-amplitude interstadial and deglacial meltwater pulse events. Analysis of five generalized sedimentary facies shows that reef drowning is characterized by a distinct biological and sedimentary sequence. Observational and numerical modeling data indicate that on precessional (20 ka) and sub-orbital timescales, the rate and amplitude of eustatic sea-level changes are critical in controlling initiation, growth, drowning or sub-aerial exposure, subsequent re-initiation, and final drowning. However, over longer timescales (>100–500 ka) continued tectonic subsidence and basement substrate morphology influence broad scale reef morphology and backstepping geometries. Drilling of these reefs will yield greatly expanded stratigraphic sections compared with similar reefs on slowly subsiding, stable and uplifting margins, and thus they represent a unique archive of sea-level and climate changes, as well as a record of the response of coral reefs to these changes over the last six glacial cycles. [Copyright &y& Elsevier]

Collision between the South Bismarck plate and the northern edge of the Australian plate has produced an actively subsiding foreland basin in the western Huon Gulf. A series of drowned carbonate platforms and pinnacles are preserved on this margin due to a combination of this rapid subsidence and eustatic sea-level changes over the last 450 ka. We analyzed sedimentary and coralgal data from the platforms to better understand lowstand reef development and drowning in the Huon Gulf. The recovered limestones are divided into five main sedimentary facies: coral reef, coralline–foraminiferal nodule, coralline–foraminiferal crust, Halimeda, and planktonic foraminiferal limestones. Based on a comparison with modern analogues in the Indo-Pacific and elsewhere, we identified coral reef, deep fore-reef slope, deeper fore-reef slope, and pelagic/hemipelagic paleoenvironmental settings. An analysis of facies relationships and their paleoenvironmental meanings revealed lowstand corals reefs preserved at the top of the platforms that grew within ∼10 m of sea level. Two different coral assemblages were identified within this facies: (1) a shallow, high energy reef community characteristic of windward margins and limited to the deep platforms (1947, 2121, 2393 m), and (2) another shallow community but indicative of more moderate lower energy reef conditions and limited to the middle (1113, 1217, 1612 m) and shallow platforms (823 m). The change from high to lower energy reef growth conditions suggests that oceanographic/climatic conditions in the Huon Gulf have changed substantially through time, primarily through the closure of the Gulf as a result of tectonic rotation and uplift of the Huon Peninsula over the last 450 ka. Despite major environmental perturbations (i.e. relative sea-level and temperature changes) the platforms and the shallow water coral reefs exposed at the top have been able to re-establish themselves time and time again over the last 450 ka. We also identified two different incipient drowning scenarios influenced by the rate of relative sea-level rise. More rapid drowning in the middle and deep platforms produced a thin veneer of coralline–foraminiferal nodule and Halimeda limestones over the shallow coral reef material while the slower drowning experienced by the shallowest platforms allowed thick coralline–foraminiferal crust limestones to develop. We recognize three main stages of platform development: (1) initiation and growth characterized by shallow coral reef growth as the platforms grew close to sea level during the lowstands, (2) incipient drowning marked by a shift to coralline–foraminiferal nodule, crust and Halimeda limestones as the platforms began to drown during rapid eustatic sea-level rise and continued subsidence, and (3) the complete drowning of the platforms characterized by platform ‘turn off’, increased bioerosion, Fe–Mn precipitation and pelagic/hemipelagic sedimentation as the platform surfaces finally drop below the photic zone. [Copyright &y& Elsevier]

Tropical carbonate platforms are edifices built by shallow-water, carbonate-producing organisms. Prolonged suppression or shutdown of tropical shallow-water carbonate factories may result in partial or complete platform demise. Factors triggering the drowning process can relate to rates of accommodation increase exceeding carbonate accumulation and/or the establishment of ecological conditions not favorable for carbonate producers, with increasing water temperatures and high nutrient contents proposed as drivers. More recently, the intensification of ocean circulation and currents has been identified as a major factor in carbonate platform drowning. We tested the latter with seismic reflection and multibeam data collected with RV Sonne in 2022 on the Queensland Plateau (north-east Australia) and by correlating these data with ODP Leg 133 sedimentological and biostratigraphic results. The carbonate platforms of the Queensland Plateau underwent a partial drowning between 13.6 and 12.7 Ma. This partial drowning is coeval with the onset of current-driven sedimentation. Relict platforms, which form the core of the presently still active platforms, were established in two steps: After the demise of a spatially expanded platform, a system with smaller, low-relief banks and mounds established. At around 3.7 Ma, there was a turnover and higher relief, flat-topped platforms established. We propose that the geologic history of the Queensland Plateau represents another example of a carbonate platform evolution controlled by ocean currents. • Seismic reflection and multibeam data collected with RV Sonne in 2022 on the Queensland Plateau • The carbonate platforms of the Queensland Plateau underwent a partial drowning between 13.6 and 12.7 Ma. • The Queensland Plateau represents another example of a carbonate platform controlled by ocean currents during its evolution [ABSTRACT FROM AUTHOR]

This paper investigates the mechanics of sediment transport on a subtidal sand apron located on a coral reef environment. In this environment 100% of the sediment is carbonate bioclasts generated in situ. The sand apron is located on the back reef and only affected by waves during high tides. It is commonly accepted in the literature that sand aprons are features that prograde lagoonwards and that most of the progradation occurs during high-energy events. Measurements of water depths, waves, currents and near bed suspended sediment concentrations (all at 10 Hz) on the sand apron were undertaken over a nine day intensive field campaign over both spring and neap tides; waves and tides were also measured in the lagoon. The topography and bathymetry of the sand apron were measured and mixing depth was obtained on three transects using depth of disturbance rods. We found that sediment transport on sand aprons is not solely restricted to high-energy events but occurs on a daily basis during spring tides. The main factor controlling the sediment transport was the water depth above the bed, with depths of 2-2.3 m allowing waves to promote the most sediment transport. This corresponds to a depth over the reef crest of 1.6-1.9 m. The second most important control was waves; transport was observed when Hs on the apron was 0.1 m or greater. In contrast, current magnitude was not a controlling mechanism for sediment entrainment but did affect sediment transport. The morphology of the sand apron was shown to affect the direction of currents with the currents also expected to influence the morphology of the sand apron. The currents measured during this field campaign were aligned with a shallow channel in the sand apron. Mixing depths were small (< 2.5 cm) yet they were larger than the values predicted by empirical formulae for gentle siliciclastic ocean beaches. [ABSTRACT FROM AUTHOR]