Search

In this work, we introduce our recent finding that the carbon fiber paper (CFP) treated by simple air annealing (OCFP) could be used for exceptionally high-performance electrochemical nitrite sensing. The air-annealing process endows the pristine CFP with higher defective edge/plane sites, more oxygen-containing functional groups, higher roughness, and improved wettability. The electrochemical studies show that the OCFP exhibits excellent sensing performance for nitrite, with an ultralow determination limit of 0.1 μM and a detection limit of 0.07 μM, an ultrawide linear determination range of 0.1-3838.5 μM, a fast current response of 1 s, and a high sensitivity of 930.4 μA mM -1 cm -2 . These performance values are comparable or even superior to those for most reported noble- or transition-metal-based advanced nitrite sensors. Besides, this electrode also presents satisfactory stability, reproducibility, and feasibility of nitrite sensing in food samples. As an ideal monolithic and metal-free catalyst with ultrahigh and stable detection performance, the OCFP has a high potential to be integrated into next-generation electrochemical sensing devices.

Porous magnesium oxide (MgO) films on carbon fiber paper (CF) have been successfully fabricated in a hydrothermal route at different calcination temperatures. The CF@MgO samples (CF@MgO-300, -400, and -500) show different morphologies with the increasing surface area from 3 for CF to 27 m 2  g -1 for CF@MgO-400. Among the four investigated samples, the CF@MgO-400 exhibits the highest phosphate removal ability (~ 1230 mg g -1 ) with promising applications for the large-scale utilization at low cost.

The aim of this study was to improve the electrical resistivity, mechanical properties, and interfacial properties between the carbon fiber (CF) and cellulose of conductive paper containing 10% CF so as to better meet the demands for electric heating wood floors. With waterborne polyurethane (WPU) treatment and nitrogen plasma modification methods, the interfacial properties between CF and cellulose were improved dramatically. Fourier transform infrared spectrometry (FTIR) revealed that the plasma modification method reduced the C-H contents and introduced numerous polar groups onto the CF surface. Scanning electron microscopy (SEM) showed that the CF modified by WPU and plasma had good adhesion with cellulose. The tensile index, tensile energy absorption index, and burst index of the paper were enhanced because of the plasma and WPU coating. The carbon fiber and WPU method presented good synergistic action with respect to mechanical properties and electrical resistivity, and the lowest electrical resistivity of conductive paper was reduced from 0.68 •cm2 to 0.44 •cm2.

A kind of paper-based composite was prepared with short carbon fibers (CFs) and para-aramid fibrids through the process of papermaking. The dielectric properties of the paper-based composites at microwave frequency were investigated. Based on the Lichtenecker Rule, the dielectric constants of CFs in composites at different CF concentrations were calculated. The absorbing performances of paper-based composites were calculated from the test results of electromagnetic parameters. It was shown that for the composites loaded with 1 mm CFs, the real part of complex permittivity rises at first then tends to be stable with the increase of the CF content, and the imaginary part rises at first then falls slightly, while for composites loaded with 3 or 6 mm CFs, both the real and imaginary part of complex permittivity grows at first and then falls rapidly with the CF content increasing. When the CF content is below 10 wt%, the composites containing longer CFs have larger permittivity at the same concentration. The Lichtenecker Rule is found to be not suitable for the system studied in this paper, especially when the content of CFs is high. The variations of reflectance and absorbance with the content of CFs generally have analogous trends . It is also found that to achieve better absorbing performance, the length and content of CFs together with the thickness of composites should be considered. In this study, the lowest reflection loss at 10 GHz reaches –27.59 dB when the paper-based composite is loaded with 1 mm CFs at the concentration of 10 wt% and the optimum thickness of 1.84 mm. [ABSTRACT FROM AUTHOR]

Abstract: Porous conducting carbon paper has been identified as one of the most suitable materials to be used as an electrode support in a polymer electrolyte membrane fuel cell (PEMFC). Carbon paper was prepared following a combined technique of papermaking followed by composite formation. Samples were prepared with varying thickness while maintaining a uniform composition and a constant density of 0.50g/cc. The effect of the thickness on various properties of carbon paper affecting its performance in the PEM fuel cell and cell efficiency has been discussed. Power density as high as 805mW/cm2 has been achieved for PEM fuel cell employing carbon paper sample with 0.028cm thickness, an increase of more than 55% as compared to 510mW/cm2 for 0.046cm thick sample. [Copyright &y& Elsevier]