Search

Reducing the use of fossil fuels is critical to human society. In recent years, electrocatalytic carbon dioxide (CO2) reduction has attracted widespread attention. A suitable CO2 reduction catalyst is essential to convert CO2 into more valuable chemical products with high selectivity and efficiency. In this paper, a highly selective ZnAlCe-Ternary metal hydroxides (ZnAlCe-THs) nanocomposite electrocatalyst material was designed and prepared, and its performance as an electrocatalyst for catalytic reduction of CO2 to carbon monoxide (CO) was explored. The layered structure of ZnAlCe-THs nanocomposites facilitates electron transfer as well as CO2 and proton transfer, providing a high specific surface area for the electroactive sites of the electrocatalytic reduction reaction. At the same time, the ZnAlCe-THs catalyst generates CO at an overpotential of − 0.5 V. At − 1.2 V versus the reversible hydrogen electrode (vs. RHE), the bias current density is about 10.46 mA cm−2 with high selectivity of 89.3% Faraday efficiency. Its excellent electrochemical properties make it a good catalyst for the selective reduction of CO2 to CO. In this paper, ZnAlCe-Ternary mental hydroxides (ZnAlCe-THs) with a layered hydrotalclike structure were prepared by hydrothermal and co-precipitation methods. It showed excellent catalytic performance in the electrocatalytic reduction of carbon dioxide to carbon monoxide with a Faraday efficiency of 89.3% at − 1.2 V vs. RHE and a current density of 10.46 mA cm−2 for higher selectivity for CO. In addition, the ZnAlCe-THs catalyst is stable and it can operate for 5 h without particularly significant deactivation. [ABSTRACT FROM AUTHOR]

Electrochemical reduction of carbon dioxide (CO 2 ) to formate is energetically inefficient because high overpotential is required for reduction of CO 2 to formate on most traditional catalysts. In this paper, a novel nano-sized Bi-based electrocatalyst deposited on a Cu foil has been synthesized, which can be used as a cathode for electrochemical reduction of CO 2 to formate with a low overpotential (0.69 V) and a high selectivity (91.3%). The electrocatalyst can show excellent catalytic performance toward reduction of CO 2 which can probably be attributed to the nano-sized structure and the surface oxide layer. The energy efficiency for reduction of CO 2 to formate can reach to 50% when an Ir x Sn y Ru z O 2 /Ti electrode is used as anode, it is one of the highest values found in the literatures and very practicable for sustainable fuel synthesis. [ABSTRACT FROM AUTHOR]