Search

During ϕX174 morphogenesis, 240 copies of the external scaffolding protein D organize 12 pentameric assembly intermediates into procapsids, a reaction reconstituted in vitro In previous studies, ϕX174 strains resistant to exogenously expressed dominant lethal D genes were experimentally evolved. Resistance was achieved by the stepwise acquisition of coat protein mutations. Once resistance was established, a stimulatory D protein mutation that greatly increased strain fitness arose. In this study, in vitro biophysical and biochemical methods were utilized to elucidate the mechanistic details and evolutionary trade-offs created by the resistance mutations. The kinetics of procapsid formation was analyzed in vitro using wild-type, inhibitory, and experimentally evolved coat and scaffolding proteins. Our data suggest that viral fitness is correlated with in vitro assembly kinetics and demonstrate that in vivo experimental evolution can be analyzed within an in vitro biophysical context., Importance: Experimental evolution is an extremely valuable tool. Comparisons between ancestral and evolved genotypes suggest hypotheses regarding adaptive mechanisms. However, it is not always possible to rigorously test these hypotheses in vivo We applied in vitro biophysical and biochemical methods to elucidate the mechanistic details that allowed an experimentally evolved virus to become resistant to an antiviral protein and then evolve a productive use for that protein. Moreover, our results indicate that the respective roles of scaffolding and coat proteins may have been redistributed during the evolution of a two-scaffolding-protein system. In one-scaffolding-protein virus assembly systems, coat proteins promiscuously interact to form heterogeneous aberrant structures in the absence of scaffolding proteins. Thus, the scaffolding protein controls fidelity. During ϕX174 assembly, the external scaffolding protein acts like a coat protein, self-associating into large aberrant spherical structures in the absence of coat protein, whereas the coat protein appears to control fidelity., (Copyright © 2016 American Society for Microbiology.)

Bacteriophage P22 has long been considered a hallmark model for virus assembly and maturation. Repurposing of P22 and other similar virus structures for nanotechnology and nanomedicine has reinvigorated the need to further understand the protein-protein interactions that allow for the assembly, as well as the conformational shifts required for maturation. In this work, gp5, the major coat structural protein of P22, has been manipulated in order to examine the mutational effects on procapsid stability and maturation. Insertions to the P22 coat protein A-domain, while widely permissive of procapsid assembly, destabilize the interactions necessary for virus maturation and potentially allow for the tunable adjustment of procapsid stability. Future manipulation of this region of the coat protein subunit can potentially be used to alter the stability of the capsid for controllable disassembly.

Rationale: Charge state resolution is required to determine the masses of ions in electrospray mass spectrometry, a feat which becomes increasingly difficult as the mass increases. Charge detection mass spectrometry (CDMS) circumvents this limitation by simultaneously measuring the charge and the m/z of individual ions. In this work, we have used electrospray CDMS to determine the number of scaffolding proteins associated with bacteriophage P22 procapsids., Methods: P22 procapsids containing a native cargo of scaffolding protein were assembled in E. coli and purified via differential centrifugation. Electrospray CDMS was used to measure their mass distribution., Results: The procapsid peak was centered at 23.60 MDa, which indicates that they contain an average of ~112 scaffolding proteins. The distribution is relatively narrow, less than 31 scaffolding proteins wide. In addition, a peak at 19.84 MDa with a relative abundance of ~15% is attributed to empty capsids. Despite having the same sizes in solution, the empty capsid and the procapsid have significantly different average charges., Conclusions: The detection of empty capsids is unexpected and the process that leads to them is unknown. The average charge on the empty capsids is significantly lower than expected from the charge residue model, which probably indicates that the empty capsids have contracted in the gas phase. The scaffolding protein presumably limits the contraction of the procapsids. This work shows that electrospray CDMS can provide valuable information for masses greater than 20 MDa., (Copyright © 2014 John Wiley & Sons, Ltd.)

The virus like particle (VLP) derived from bacteriophage P22 presents a unique platform for constructing catalytically functional nanomaterials by encapsulation of enzymes into its interior. Encapsulation has been engineered to be genetically programmed allowing "one pot" synthesis and incorporation of desired enzymes. The unique characteristic that separates P22 from other VLP systems is the ability to modulate the overall volume and porosity of the VLP structure, thus controlling substrate access to the encapsulated enzyme. The present study demonstrates incorporation of an enzyme, alcohol dehydrogenase D, with the highest internal loading for an active enzyme by any VLP described thus far. In addition, we show that not only does encapsulating AdhD inside P22 affect its kinetic parameters in comparison with the "free" enzyme, but transformation of P22 to different morphological states, which changes the internal volume of the VLP, yields changes in the overall activity of the encapsulated enzyme as well. The findings reported here clearly illustrate that P22 holds potential for synthetic approaches to create nanoreactors, by design, using the power of highly evolved enzymes for chemical transformations.

Following budding, HIV-1 virions undergo a maturation process where the Gag polyprotein in the immature virus is cleaved by the viral protease and rearranges to form the mature infectious virion. Despite the wealth of structures of isolated capsid domains and an in vitro-assembled mature lattice, models of the immature lattice do not provide an unambiguous model of capsid-molecule orientation and no structural information is available for the capsid maturation pathway. Here we have applied hydrogen/deuterium exchange mass spectrometry to immature, mature, and mutant Gag particles (CA5) blocked at the final Gag cleavage event to examine the molecular basis of capsid assembly and maturation. Capsid packing arrangements were very similar for all virions, whereas immature and CA5 virions contained an additional intermolecular interaction at the hexameric, 3-fold axis. Additionally, the N-terminal β-hairpin was observed to form as a result of capsid-SP1 cleavage rather than driving maturation as previously postulated., (Copyright © 2010 Elsevier Ltd. All rights reserved.)

Viral capsids are dynamic macromolecular machines which self-assemble and undergo concerted conformational changes during their life cycle. We have taken advantage of the inherent structural flexibility of viral capsids and generated two morphologically different types of viral nanoplatforms from the bacteriophage P22 capsids. Their interior surfaces were genetically manipulated for site-specific attachment of a biotin linker. The extent of internal modifications in each capsid form was characterized by high-resolution mass spectrometry and the analyses revealed that the reactivity of the genetically introduced residues located on the internal surface changes according to the structural transformation of the capsid. Internally modified capsids having 10 nm diameter pores at the 12 icosahedral vertices, so-called wiffle-balls (WB), exhibited the capability to entrap the large tetrameric protein complex streptavidin via the biotin linker anchored onto the interior surface of the WB.

The incorporation of the DNA packaging connector complex during lambdoid phage assembly in vivo is strictly controlled-one and only one of the twelve identical icosahedral vertices is differentiated by the inclusion of a portal or connector dodecamer. Proposed control mechanisms include obligate nucleation from a connector containing complex, addition of the connector as the final step during assembly, and a connector-mediated increase in the growth rate. The inability to recapitulate connector incorporation in vitro has made it difficult to obtain direct biochemical evidence in support of one model over another. Here we report the development an in vitro assembly system for the well characterized dsDNA phage Phi29 which results in the co-assembly of connector with capsid and scaffolding proteins to form procapsid-like particles (PLPs). Immuno-electron microscopy demonstrates the specific incorporation of connector vertex in PLPs. The connector protein increases both the yield and the rate of capsid assembly suggesting that the incorporation of the connector in Phi29 likely promotes nucleation of assembly.

Bacteriophage P22 serves as a model for the assembly and maturation of other icosahedral double-stranded DNA viruses. P22 coat and scaffolding proteins assemble in vitro into an icosahedral procapsid, which then expands during DNA packaging (maturation). Efficient in vitro assembly makes this system suitable for design and production of monodisperse spherical nanoparticles (diameter approximately 50 nm). In this work, we explore the possibility of controlling the outcome of assembly by scaffolding protein engineering. The scaffolding protein exists in monomer-dimer-tetramer equilibrium. We address the role of monomers and dimers in assembly by using three different scaffolding proteins with altered monomer-dimer equilibrium (weak dimer, covalent dimer, monomer). The progress and outcome of assembly was monitored by time-resolved X-ray scattering, which allowed us to distinguish between closed shells and incomplete assembly intermediates. Binding of scaffolding monomer activates the coat protein for assembly. Excess dimeric scaffolding protein resulted in rapid nucleation and kinetic trapping yielding incomplete shells. Addition of monomeric wild-type scaffold with excess coat protein completed these metastable shells. Thus, the monomeric scaffolding protein plays an essential role in the elongation phase by activating the coat and effectively lowering its critical concentration for assembly.

An in vitro assembly system was developed to study prolate capsid assembly of phage ø29 biochemically, and to identify regions of scaffolding protein required for its functions. The crowding agent polyethylene glycol can induce bacteriophage ø29 monomeric capsid protein and dimeric scaffolding protein to co-assemble to form particles which have the same geometry as either prolate T=3 Q=5 procapsids formed in vivo or previously observed isometric particles. The formation of particles is a scaffolding-dependent reaction. The balance between the fidelity and efficiency of assembly is controlled by the concentration of crowding agent and temperature. The assembly process is salt sensitive, suggesting that the interactions between the scaffolding and coat proteins are electrostatic. Three N-terminal ø29 scaffolding protein deletion mutants, Delta 1-9, Delta 1-15 and Delta 1-22, abolish the assembly activity. Circular dichroism spectra indicate that these N-terminal deletions are accompanied by a loss of helicity. The inability of these proteins to dimerize suggests that the N-terminal region of the scaffolding protein contributes to the dimer interface and maintains the structural integrity of the dimeric protein. Two C-terminal scaffolding protein deletion mutants, Delta 79-97 and Delta 62-97, also fail to promote assembly. However, the secondary structure and the dimerization ability of these mutants are unchanged relative to wild-type, which suggests that the C terminus is the likely site of interaction with the capsid protein.

Viral capsids are dynamic structures which undergo a series of structural transformations to form infectious viruses. The dsDNA bacteriophage P22 is used as a model system to study the assembly and maturation of icosahedral dsDNA viruses. The P22 procapsid, which is the viral capsid precursor, is assembled from coat protein with the aid of scaffolding protein. Upon DNA packaging, the capsid lattice expands and becomes a stable virion. Limited proteolysis and biochemical experiments indicated that the coat protein consists of two domains connected by a flexible loop. To investigate the properties and roles of the sub-domains, we have cloned them and initiated structure and function studies. The N-terminal domain, which is made up of 190 amino acid residues, is largely unstructured in solution, while the C-terminal domain, which consists of 239 amino acid residues, forms a stable non-covalent dimer. The N-terminal domain adopts additional structure in the context of the C-terminal domain which might form a platform on which the N-terminal domain can fold. The local dynamics of the coat protein in both procapsids and mature capsids was monitored by hydrogen/deuterium exchange combined with mass spectrometry. The exchange rate for C-terminal domain peptides was similar in both forms. However, the N-terminal domain was more flexible in the empty procapsid shells than in the mature capsids. The flexibility of the N-terminal domain observed in the solution persisted into the procapsid form, but was lost upon maturation. The loop region connecting the two domains exchanged rapidly in the empty procapsid shells, but more slowly in the mature capsids. The global stabilization of the N-terminal domain and the flexibility encoded in the loop region may be a key component of the maturation process.

Bacteriophage with linear, double-stranded DNA genomes package DNA into preassembled protein shells called procapsids. Located at one vertex in the procapsid is a portal complex composed of a ring of 12 subunits of portal protein. The portal complex serves as a docking site for the DNA packaging enzymes, a conduit for the passage of DNA, and a binding site for the phage tail. An excess of the P22 portal protein alters the assembly pathway of the procapsid, giving rise to defective procapsid-like particles and aberrant heads. In the present study, we report the isolation of escape mutant phage that are able to replicate more efficiently than wild-type phage in the presence of excess portal protein. The escape mutations all mapped to the same phage genome segment spanning the portal, scaffold, coat, and open reading frame 69 genes. The mutations present in five of the escape mutants were determined by DNA sequencing. Interestingly, each mutant contained the same mutation in the scaffold gene, which changes the glycine at position 287 to glutamate. This mutation alone conferred an escape phenotype, and the heads assembled by phage harboring only this mutation had reduced levels of portal protein and exhibited increased head assembly fidelity in the presence of excess portal protein. Because this mutation resides in a region of scaffold protein necessary for coat protein binding, these findings suggest that the P22 scaffold protein may define the portal vertices in an indirect manner, possibly by regulating the fidelity of coat protein polymerization.

The human immunodeficiency virus type 1 (HIV-1) capsid protein (CA) plays a crucial role in both assembly and maturation of the virion. Numerous recent studies have focused on either the soluble form of CA or the polymer end product of in vitro CA assembly. The CA polymer, in particular, has been used to study CA-CA interactions because it is a good model for the CA interactions within the virion core. However, analysis of the process of in vitro CA assembly can yield valuable insights into CA-CA interactions and the mechanism of core assembly. We describe here a method for the analysis of CA assembly kinetics wherein the progress of assembly is monitored by using turbidity. At pH 7.0 the addition of either of the isolated CA domains (i.e., the N or the C domain) to an assembly reaction caused a decrease in the assembly rate by competing for binding to the full-length CA protein. At pH 8.0 the addition of the isolated C domain had a similar inhibitory affect on CA assembly. However, at pH 8.0 the isolated N domain had no affect on the rate of CA assembly but, when mixed with the C domain, it alleviated the C-domain inhibition. These data provide biochemical evidence for a pH-sensitive homotypic N-domain interaction, as well as for an N- and C-domain interaction.

Bacteriophage with double-stranded, linear DNA genomes package DNA into pre-assembled icosahedral procapsids through a unique vertex. The packaging vertex contains an oligomeric ring of a portal protein that serves as a recognition site for the packaging enzymes, a conduit for DNA translocation, and the site of tail attachment. Previous studies have suggested that the portal protein of bacteriophage P22 is not essential for shell assembly; however, when assembled in the absence of functional portal protein, the assembled heads are not active in vitro packaging assays. In terms of head assembly, this raises an interesting question: how are portal vertices defined during morphogenesis if their incorporation is not a requirement for head assembly? To address this, the P22 portal gene was cloned into an inducible expression vector and transformed into the P22 host Salmonella typhimurium to allow control of the dosage of portal protein during infections. Using pulse-chase radiolabeling, it was determined that the portal protein is recruited into virion during head assembly. Surprisingly, over-expression of the portal protein during wild-type P22 infection caused a dramatic reduction in the yield of infectious virus. The cause of this reduction was traced to two potentially related phenomena. First, excess portal protein caused aberrant head assembly resulting in the formation of T=7 procapsid-like particles (PLPs) with twice the normal amount of portal protein. Second, maturation of the PLPs was blocked during DNA packaging resulting in the accumulation of empty PLPs within the host. In addition to PLPs with normal morphology, smaller heads (apparently T=4) and aberrant spirals were also produced. Interestingly, maturation of the small heads was relatively efficient resulting in the formation of small mature particles that were tailed and contained a head full of DNA. These data suggest that incorporation of portal vertices into heads occurs during growth of the coat lattice at decision points that dictate head assembly fidelity., (Copyright 2002 Elsevier Science Limited.)

Salmonella phage P22, which serves as an assembly paradigm for icosahedral double-stranded DNA viruses, packages its viral genome through a capsid channel (portal) comprising 12 copies of a 725-residue subunit. Secondary and tertiary structures of the portal subunit in monomeric and dodecameric states have been investigated by Raman spectroscopy using a His6-tagged recombinant protein that self-assembles in vitro [Moore, S. D., and Prevelige, P. E., Jr. (2001) J. Biol. Chem. 276, 6779-6788]. The portal protein exhibits Raman secondary structure markers typical of a highly alpha-helical subunit fold that is little perturbed by assembly. On the other hand, Raman markers of subunit side chains change dramatically with assembly, an indication of extensive changes in side chain environments. The cysteinyl Raman signature of the portal consists of a complex pattern of sulfhydryl stretching bands, revealing diverse hydrogen-bonding states for the four S-H groups per subunit (Cys 153, Cys 173, Cys 283, and Cys 516). Upon assembly, the population of strongly hydrogen-bonded S-H groups decreases, while the population of weakly hydrogen-bonded S-H groups increases, implying that specific intrasubunit S-H.X hydrogen bonds must be weakened to effect dodecamer assembly and that the molecular mechanism involves reorganization of subunit domains without appreciable changes in domain conformations. Comparison with other viral protein assemblies suggests an assembly process not requiring metastable intermediates. The recently published X-ray structure of the phi29 portal [Simpson, A. A., et al. (2000) Nature 408, 745-750] shows that residues 125-225 lining the channel surface form alpha-helical modules spaced by short beta-strands and turns; a surprisingly close secondary structure homology is predicted for residues 240-350 of the P22 portal, despite no apparent sequence homology. This motif is proposed as an evolutionarily conserved domain involved in DNA translocation.

A wide variety of viruses require the transient presence of scaffolding proteins to direct capsid assembly. In the case of bacteriophage P22, a model in which the scaffolding protein selectively stabilizes on-pathway growing intermediates has been proposed. The stoichiometry and thermodynamics of binding of the bacteriophage P22 scaffolding protein within the procapsid were analyzed by light scattering and isothermal titration calorimetry. Calorimetric experiments carried out between 10 and 37 degrees C were consistent with the presence of at least two distinct populations of binding sites, in agreement with kinetic evidence obtained by a light scattering assay. Binding to the high-affinity sites occurred at 20 degrees C with a stoichiometry of approximately 60 scaffolding molecules per procapsid and an apparent K(d) of approximately 100-300 nM and was almost completely enthalpy-driven. For the second binding population, precise fitting of the data was impossible due to small heats of binding, but the thermodynamics of binding were clearly distinct from the high-affinity phase. The heat capacity change (DeltaC(p)()) of binding was large for the high-affinity sites and negative for both sets of sites. Addition of sodium chloride (1 M) greatly reduced the magnitude of the apparent DeltaH, in agreement with previous evidence that electrostatic interactions play a major role in binding. A mutant scaffolding protein that forms covalent dimers (R74C/L177I) bound only to the high-affinity sites. These data comprise the first quantitative measurements of the energetics of the coat protein/scaffolding protein interaction.

The dynamics of proteins within large cellular assemblies are important in the molecular transformations that are required for macromolecular synthesis, transport, and metabolism. The capsid expansion (maturation) accompanying DNA packaging in the dsDNA bacteriophage P22 represents an experimentally accessible case of such a transformation. A novel method, based on hydrogen-deuterium exchange was devised to investigate the dynamics of capsid expansion. Mass spectrometric detection of deuterium incorporation allows for a sensitive and quantitative determination of hydrogen-deuterium exchange dynamics irrespective of the size of the assembly. Partial digestion of the exchanged protein with pepsin allows for region-specific assignment of the exchange. Procapsids and mature capsids were probed under native and slightly denaturing conditions. These experiments revealed regions that exhibit different degrees of flexibility in the procapsid and in the mature capsid. In addition, exchange and deuterium trapping during the process of expansion itself was observed and allowed for the identification of segments of the protein subunit that become buried or stabilized as a result of expansion. This approach may help to identify residues participating in macromolecular transformations and uncover novel patterns and hierarchies of interactions that determine functional movements within molecular machines.

P22 serves as a model for the assembly and maturation of icosahedral double-stranded DNA viruses. The viral capsid precursor, or procapsid, is assembled from 420 copies of a 47 kDa coat protein subunit (gp5) that is rich in beta-strand secondary structure. Maturation to the capsid, which occurs in vivo upon DNA packaging, is accompanied by shell expansion and a large increase in the level of protection against deuterium exchange of amide NH groups. Accordingly, shell maturation resembles the final step in protein folding, wherein domain packing and an exchange-protected core become more fully developed [Tuma, R., Prevelige, P. E., Jr., and Thomas, G. J., Jr. (1998) Proc. Natl. Acad. Sci. U.S.A. 95, 9885-9890]. Here, we exploit recent advances in Raman spectroscopy to investigate the P22 coat protein subunit under conditions which stabilize the monomeric state, viz., in solution at very low concentrations. Under these conditions, the monomer exhibits an elongated shape, as demonstrated by small-angle X-ray scattering. Raman spectra allow the identification of conformation-sensitive marker bands of the monomer, as well as the characterization of NH exchange dynamics for comparison with procapsid and capsid shell assemblies. We show that procapsid assembly involves significant ordering of the predominantly beta-strand backbone. We propose that such ordering may mediate formation of the distinct subunit conformations required for assembly of a T = 7 icosahedral lattice. However, the monomer, like the subunit within the procapsid lattice, exhibits a moderate level of protection against low-temperature NH exchange, indicative of a nascent folding core. The environments and exchange characteristics of key side chains are also similar for the monomeric and procapsid subunits, and distinct from corresponding characteristics of the capsid subunit. The monomer thus represents a compact but metastable folding intermediate along the pathway to assembly of the procapsid and capsid.

Scaffolding proteins are required for high fidelity assembly of most high T number dsDNA viruses such as the large bacteriophages, and the herpesvirus family. They function by transiently binding and positioning the coat protein subunits during capsid assembly. In both bacteriophage P22 and the herpesviruses the extreme scaffold C terminus is highly charged, is predicted to be an amphipathic alpha-helix, and is sufficient to bind the coat protein, suggesting a common mode of action. NMR studies show that the coat protein-binding domain of P22 scaffolding protein exhibits a helix-loop-helix motif stabilized by a hydrophobic core. One face of the motif is characterized by a high density of positive charges that could interact with the coat protein through electrostatic interactions. Results from previous studies with a truncation fragment and the observed salt sensitivity of the assembly process are explained by the NMR structure., (Copyright 2000 Academic Press.)

Scaffolding proteins play a critical role in the assembly of certain viruses by directing the formation and maturation of a precursor capsid. Using electron cryomicroscopy difference mapping, we have identified an altered arrangement of a mutant scaffolding within the bacteriophage P22 procapsid. This mutant scaffolding allows us to directly visualize scaffolding density within the P22 procapsid. Based on these observations we propose a model for why the mutant prevents scaffolding release and capsid maturation.

Large-scale conformational transitions are involved in the life-cycle of many types of virus. The dsDNA phages, herpesviruses, and adenoviruses must undergo a maturation transition in the course of DNA packaging to convert a scaffolding-containing precursor capsid to the DNA-containing mature virion. This conformational transition converts the procapsid, which is smaller, rounder, and displays a distinctive skewing of the hexameric capsomeres, to the mature virion, which is larger and more angular, with regular hexons. We have used electron cryomicroscopy and image reconstruction to obtain 15 A structures of both bacteriophage P22 procapsids and mature phage. The maturation transition from the procapsid to the phage results in several changes in both the conformations of the individual coat protein subunits and the interactions between neighboring subunits. The most extensive conformational transformation among these is the outward movement of the trimer clusters present at all strict and local 3-fold axes on the procapsid inner surface. As the trimer tips are the sites of scaffolding binding, this helps to explain the role of scaffolding protein in regulating assembly and maturation. We also observe DNA within the capsid packed in a manner consistent with the spool model. These structures allow us to suggest how the binding interactions of scaffolding and DNA with the coat shell may act to control the packaging of the DNA into the expanding procapsids., (Copyright 2000 Academic Press.)

The bacteriophage P22 serves as a model for assembly of icosahedral dsDNA viruses. The P22 procapsid, which constitutes the precursor for DNA packaging, is built from 420 copies of a single coat protein with the aid of stoichiometric amounts of scaffolding protein. Upon DNA entry, the procapsid shell expands and matures into a stable virion. It was proposed that expansion is mediated by hinge bending and domain movement. We have used limited proteolysis to map the dynamic stability of the coat protein domain structures. The coat protein monomer is susceptible to proteolytic digestion, but limited proteolysis by small quantities of elastase or chymotrypsin yielded two metastable fragments (domains). The N-terminal domain (residues 1-180) is linked to the C-terminal domain (residues 205-429) by a protease-susceptible loop (residues 180-205). The two domains remain associated after the loop cleavage. Although only a small change of secondary structure results from the loop cleavage, both tertiary interdomain contacts and subunit thermostability are diminished. The intact loop is also required for assembly of the monomeric coat protein into procapsids. Upon assembly, coat protein becomes largely protease-resistant, baring cleavage within the loop region of about half of the subunits. Loop cleavage decreases the stability of the procapsids and facilitates heat-induced shell expansion. Upon expansion, the loop becomes protease-resistant. Our data suggest the loop region becomes more ordered during assembly and maturation and thereby plays an important role in both of these stages.

Assembly of certain classes of bacterial and animal viruses requires the transient presence of molecules known as scaffolding proteins, which are essential for the assembly of the precursor procapsid. To assemble a procapsid of the proper size, each viral coat subunit must adopt the correct quasiequivalent conformation from several possible choices, depending upon the T number of the capsid. In the absence of scaffolding protein, the viral coat proteins form aberrantly shaped and incorrectly sized capsids that cannot package DNA. Although scaffolding proteins do not form icosahedral cores within procapsids, an icosahedrally ordered coat/scaffolding interaction could explain how scaffolding can cause conformational differences between coat subunits. To identify the interaction sites of scaffolding protein with the bacteriophage P22 coat protein lattice, we have determined electron cryomicroscopy structures of scaffolding-containing and scaffolding-lacking procapsids. The resulting difference maps suggest specific interactions of scaffolding protein with only four of the seven quasiequivalent coat protein conformations in the T = 7 P22 procapsid lattice, supporting the idea that the conformational switching of a coat subunit is regulated by the type of interactions it undergoes with the scaffolding protein. Based on these results, we propose a model for P22 procapsid assembly that involves alternating steps in which first coat, then scaffolding subunits form self-interactions that promote the addition of the other protein. Together, the coat and scaffolding provide overlapping sets of binding interactions that drive the formation of the procapsid.

Bacteriophage P22 belongs to a family of double-stranded DNA viruses that share common morphogenetic features like DNA packaging into a procapsid precursor and maturation. Maturation involves cooperative expansion of the procapsid shell with concomitant lattice stabilization. The expansion is thought to be mediated by movement of two coat protein domains around a hinge. The metastable conformation of subunit within the procapsid lattice is considered to constitute a late folding intermediate. In order to understand the mechanism of expansion it is necessary to characterize the interactions stabilizing procapsid and mature capsid lattices, respectively. We employ pressure dissociation to compare subunit packing within the procapsid and expanded lattice. Procapsid shells contain larger cavities than the expanded shells, presumably due to polypeptide packing defects. These defects contribute to the metastable nature of the procapsid lattice and are cured during expansion. Improved packing contributes to the increased stability of the expanded shell. Comparison of two temperature-sensitive folding (tsf) mutants of coat protein (T294I and W48Q) with wild-type coat revealed that both mutations markedly destabilized the procapsid shell and yet had little effect on relative stability of the monomeric subunit. Thus, the regions affected by these packing defects constitute subunit interfaces of the procapsid shell. The larger activation volume of pressure dissociation observed for both T294I and W48Q indicates that the decreased stability of these particles is due to increase of cavity defects. These defects in the procapsid lattice are cured upon expansion suggesting that the intersubunit contacts affected by tsf mutations are absent or rearranged in the mature shell. The energetics of the in vitro expansion reaction also suggests that entropic stabilization contributes to the large free energy barrier for expansion., (Copyright 1999 Academic Press.)

A computer model is described for studying the kinetics of the self-assembly of icosahedral viral capsids. Solution of this problem is crucial to an understanding of the viral life cycle, which currently cannot be adequately addressed through laboratory techniques. The abstract simulation model employed to address this is based on the local rules theory of. Proc. Natl. Acad. Sci. USA. 91:7732-7736). It is shown that the principle of local rules, generalized with a model of kinetics and other extensions, can be used to simulate complicated problems in self-assembly. This approach allows for a computationally tractable molecular dynamics-like simulation of coat protein interactions while retaining many relevant features of capsid self-assembly. Three simple simulation experiments are presented to illustrate the use of this model. These show the dependence of growth and malformation rates on the energetics of binding interactions, the tolerance of errors in binding positions, and the concentration of subunits in the examples. These experiments demonstrate a tradeoff within the model between growth rate and fidelity of assembly for the three parameters. A detailed discussion of the computational model is also provided.

The first step in assembly of the bacteriophage P22 is the formation of a T=7 icosahedral "procapsid," the major components of which are the coat protein and an inner core composed of the scaffolding protein. Although not present in the mature virion, the scaffolding protein is required for procapsid assembly. Eleven amino-acid residues at the extreme carboxyl terminus of the scaffolding protein are required for binding to the coat protein, and upon deletion of these residues, approximately 20 additional residues become disordered. Sequence analysis and NMR data suggest that the 30 residues at the carboxyl terminus form a helix-loop-helix motif which is stabilized by interhelical hydrophobic interactions. This "coat protein recognition domain" presents an unusually high number of positively charged residues on one face, suggesting that electrostatic interactions between this domain and the coat protein may contribute to recognition and binding. We report here that high ionic strength (1 M NaCl) completely inhibited procapsid assembly in vitro. When scaffolding protein was added to empty procapsid "shells" of coat protein, 1 M NaCl partially inhibited the binding of scaffolding protein to the shells. This suggests that the positively charged coat protein recognition domain at the carboxyl terminus of the scaffolding protein binds to a negatively charged region on the coat protein. During DNA packaging, the scaffolding protein exits the procapsid; scaffolding protein exit is followed by the expansion of the procapsid into a mature capsid. Procapsid shells can be induced to undergo a similar expansion reaction in vitro by heating (45-70 degreesC); this process was also inhibited by 1 M NaCl. These results are consistent with a model in which negatively charged scaffold protein-binding domains in the coat proteins move apart during procapsid expansion; this relief of electrostatic repulsion could provide a driving force for expansion and subsequent maturation. High-salt concentrations would screen this repulsion, while packaging of DNA (a polyanion) in vivo may increase the instability of the procapsid enough to trigger its expansion., (Copyright 1998 Academic Press)

Folding mechanisms of proteins incorporated within supramolecular assemblies, including viruses, are little understood and may differ fundamentally from folding mechanisms of small globular proteins. We describe a novel Raman dynamic probe of hydrogen-isotope exchange to investigate directly these protein folding/assembly pathways. The method is applied to subunit folding in assembly intermediates of the double-stranded DNA bacteriophage P22. The icosahedral procapsid-to-capsid maturation (shell expansion) of P22 is shown to be accompanied by a large increase in exchange protection of peptide beta-strands. The molecular mechanism of shell expansion involves unfolding of metastable tertiary structure to form more stable quaternary contacts and is governed by a surprisingly high activation energy. The results demonstrate that coat subunit folding and capsid expansion are strongly coupled processes. Subunit structure in the procapsid represents a late intermediate along the folding/assembly pathway to the mature capsid. Coupling of folding and assembly is proposed as a general pathway for the construction of supramolecular complexes.

The scaffolding protein of bacteriophage P22 directs the assembly of an icosahedral procapsid, a metastable shell that is the precursor for DNA packaging. The full-length protein has been shown previously to exist in a monomer-dimer-tetramer equilibrium of elongated and predominantly alpha-helical molecules. Two deletion-mutant fragments of the scaffolding protein, comprising amino acid residues 141 to 303 and 141 to 292, respectively, have been constructed, overexpressed in Escherichia coli, and purified. Removal of residues 1 to 140 yields a protein that is assembly-active both in vitro and in vivo, while the removal of the C-terminal 11 residues (293 to 303) leads to complete loss of scaffolding activity. Sedimentation analysis reveals that both scaffolding fragments exist in a monomer-dimer equilibrium governed by apparent dissociation constants Kd(141-303)=640 microM and Kd(141-292)=880 microM. Tetramer formation is not observed for either fragment; thus, the tetramerization domain of the scaffolding subunit resides in the N-terminal portion of the polypeptide chain. Examination of both fragments by circular dichroism, Raman and NMR spectroscopies indicates a highly alpha-helical fold in each case. Nonetheless, pronounced differences are observed between spectral signatures of the two fragments. Notably, Raman spectra of fragments 141-292 and 141-303 indicate that elimination of residues 293 to 303 results in unfolding of an alpha-helical coat protein "recognition" domain encompassing about 20 to 30 residues. The thermostability of fragment 141-303, monitored over a wide concentration range by circular dichroism and Raman spectroscopy, indicates a broad denaturation transition for the monomeric (low concentration) form, while more cooperative unfolding is observed for the dimeric (high concentration) form. A lesser increase in cooperativity upon dimerization is obtained for fragment 141-292. Additionally, the C-terminal recognition domain constitutes the most stable and cooperative unit in the 141-303 fragment. Measurement of hydrogen-isotope exchange kinetics in scaffolding fragments by time-resolved Raman spectroscopy shows that the C terminus is the only protected segment of the polypeptide chain. On the basis of the measured hydrodynamic and spectroscopic properties, a domain structure is proposed for the scaffolding subunit. The roles of these domains in P22 procapsid assembly are discussed., (Copyright 1998 Academic Press.)

Virus capsids assemble through the repeated interaction of well-defined protein subunits in a highly specific process. Basic research into the mechanism of protein polymerisation and virus assembly suggest that inhibition of the protein-protein interactions necessary for assembly is a valid therapeutic strategy. Computer models of virus-capsid assembly have located vulnerable stages in assembly, and small-molecule inhibitors of virus assembly have been identified. The challenge will be identifying agents that block assembly with the required specificity.

The scaffolding protein of Salmonella typhimurium bacteriophage P22 is a 33.6 kDa protein required both in vivo and in vitro for the polymerization of the viral coat protein into closed T = 7 icosahedral procapsids. In vitro assembly reaction kinetics have previously been found to vary between second and third order with respect to scaffolding protein concentration, suggesting that dimers and/or higher-order oligomers may be the active species in assembly. Analytical ultracentrifugation experiments suggest that scaffolding protein undergoes a rapidly-reversible monomer/dimer/tetramer equilibrium, with higher association constants at 4 degrees C than at 20 degrees C. Under conditions in which in vitro assembly reactions are carried out (30 to 1000 microg/ml scaffolding protein, 20 degrees C), monomers are the predominant species, but the concentration of dimers is significant. A mutant scaffolding protein, R74C/L177I, which forms disulfide-linked dimers, catalyzed procapsid assembly at a higher rate than did the wild-type scaffolding protein; preincubation in dithiothreitol had little effect on the wild-type protein, but greatly reduced the activity of the mutant. These findings suggest that dimers and/or higher-order oligomers of scaffolding protein are active species in the assembly of P22.

The procapsids of bacterial viruses are the products of the polymerization of coat and scaffolding subunits, as well as the precursors in DNA packaging. Electron cryo-microscopy has been used to study the three-dimensional structures of bacteriophage P22 procapsids containing wild-type and mutant scaffolding proteins. The scaffolding mutant structure has been resolved to 19 A resolution and agrees with the 22 A resolution wild-type procapsid reconstruction. Both procapsid reconstructions contain an outer icosahedral coat protein shell and an inner scaffolding protein core. The outer core protein forms a T = 7 icosahedral lattice with distinctive channels present at the centers of the pentons and hexons. In addition, the hexons display a prominent skew. Computational isolation of the skewed hexon shows the presence of a local 2-fold axis that reduces the number of unique conformations in the asymmetric unit to four at this resolution. We have classified the four unique subunits into three distinct classes, based upon the shape of the upper domain and the presence of a channel leading to the inner coat protein surface. In addition, at the inner surface of the coat protein, finger-like regions that extend towards the scaffolding protein core are present in two of the subunits. The finger-like regions suggest the presence of an ordered interaction between the inner coat protein and the scaffolding protein. However, an icosahedral scaffolding protein shell is not formed, and the innermost scaffolding protein core does not pack with icosahedral symmetry.

An in vitro system for investigating the assembly of the Salmonella phage P22 has been exploited to elucidate the structural basis of recognition between scaffolding protein (gp8) and coat protein (gp5) subunits of the viral procapsid. Raman spectroscopy and circular dichroism have been employed to examine structural thermostabilities of both gp8 and gp5 in native procapsids, and to characterize structural changes accompanying scaffolding exit, procapsid expansion, and shell disassembly. It is found that the secondary structure of the isolated gp8 subunit is rich in alpha-helix (approximately 40%), is highly thermolabile, and is characterized by noncooperative unfolding (Tm approximately 49 degrees C). Conversely, the procapsid-bound gp8 subunit exhibits stabilization of its alpha-helical secondary structure, characterized by cooperative unfolding. Because cooperative unfolding of gp8 coincides with exit from the procapsid, the present results suggest that unfolding and release are coupled processes. Structural differences between procapsid-free and procapsid-bound gp8 subunits are also apparent in Raman markers which monitor environments of tyrosine and tryptophan side chains. Temperature-resolved Raman spectroscopy of the empty procapsid shell reveals three distinct structural transitions for the gp5 subunits. The first, which occurs between 50 and 65 degrees C, is attributed to shell expansion and results in an increase in beta-strand secondary structure. The two higher temperature transitions, occurring within intervals of 70-80 and 80-95 degrees C, respectively, are attributed to partial unfolding of the shell subunit and subsequent shell disassembly. The same gp5 structure transitions are detected for procapsids which contain scaffolding protein. On the basis of the observed thermodynamic coupling between gp8 unfolding and its release from the procapsid, we propose a model for P22 procapsid assembly. Implications of the model for in vivo assembly of dsDNA viruses are discussed.

Bacteriophage P22 is a double-stranded DNA containing phage. Its morphogenetic pathway requires the formation of a precursor procapsid that subsequently matures to the capsid. The stability of bacteriophage P22 coat protein in both monomeric and polymeric forms under hydrostatic pressure has been examined previously [Prevelige, P. E., King, J., & Silva, J. L. (1994) Biophys. J. 66, 1631-1641]. The monomeric protein is very unstable to pressure and undergoes denaturation at pressures below 1.5 kbar, whereas the procapsid shell is very stable to applied pressure and does not dissociate with pressure to 2.5 kbar. However, under applied pressure the procapsid shells are cold labile, suggesting they are entropically stabilized. We have analyzed the pressure stability of mutant procapsid shells having either of two single amino acid substitutions in the coat protein (G232D and W48Q) using light-scattering and fluorescence emission methods. While the wild-type shells were stable under 2.2 kbar of pressure at room temperature (22 degrees C), the G232D mutant shells showed time-dependent dissociation under these conditions. Decreasing the temperature to 1 degree C dramatically accelerated the dissociation of G232D mutant under applied pressure. On the other hand, the W48Q mutant shells could be dissociated easily by pressure at room temperature and displayed little dependence on temperature, suggesting a smaller entropic contribution to the stability of this mutant. The unpolymerized mutant subunits displayed a pressure stability similar to that of the wild type.(ABSTRACT TRUNCATED AT 250 WORDS)

The pressure stability of bacteriophage P22 coat protein in both monomeric and polymeric forms under hydrostatic pressure was examined using light scattering, fluorescence emission, polarization, and lifetime methodology. The monomeric protein is very unstable toward pressure and undergoes significant structural changes at pressures as low as 0.5 kbar. These structural changes ultimately lead to denaturation of the subunit. Comparison of the protein denatured by pressure to that in guanidine hydrochloride suggests that pressure results in partial unfolding, perhaps by a domain mechanism. Fluorescence lifetime measurements indicate that at atmospheric pressure the local environments of the tryptophans are remarkably similar, suggesting they may be clustered. In contrast to the monomeric protein subunit, the protein when polymerized into procapsid shells is very stable to applied pressure and does not dissociate with pressure up to 2.5 kbar. However, under applied pressure the procapsid shells are cold-labile, suggesting they are entropically stabilized. The significance of these results in terms of virus assembly are discussed.

The precursor shells of dsDNA bacteriophages are assembled by the polymerization of competent states of coat and scaffolding subunits. The fluorescent dye 1,1'-bi(4-anilinonaphthalene-5-sulfonic acid) (bisANS) binds to both the coat and scaffolding proteins from the Salmonella typhimurium bacteriophage P22. It displays little affinity for the polymerized forms of the proteins. The subunits with bound bisANS are incapable of assembling into procapsids. The binding constants of bisANS for both coat and scaffolding protein monomers have been measured and are 7 and 6 microM, respectively. Binding of bisANS to coat protein has little effect on the conformation as determined by circular dichroism and susceptibility to proteolysis. Binding of bisANS to scaffolding protein induces a change in the secondary structure consistent with a loss of alpha-helix, and an altered susceptibility to proteolysis. We suggest that the bisANS is probably binding at sites responsible for intersubunit interactions and thereby inhibiting capsid assembly.

Three-dimensional structures of the empty procapsid and the mature capsid of the Salmonella bacteriophage P22 have been determined to a resolution of 28 A using electron cryomicroscopy and computer image processing. The coat subunits in both the structures are arranged as pentamers and hexamers on a T = 7 icosahedral lattice. The two structures display significant differences in shape, size and intersubunit interactions. The empty procapsid is spherical in contrast to the distinctly larger and polyhedral mature capsid. The empty procapsid structure exhibits holes at all the quasi sixfold positions that are absent in the mature capsid. These holes may be the exit ports for scaffolding subunits. Detailed comparisons of the two structures indicate that extensive structural changes take place during maturation in all seven quasi-equivalent subunits. These changes cause flattening of the icosahedral facets, capsid expansion and closing of the holes. This process results in a stable and impenetrable capsid that protects the bacterial genome.

The polymerization of protein subunits into precursor shells empty of DNA is a critical process in the assembly of double-stranded DNA viruses. For the well-characterized icosahedral procapsid of phage P22, coat and scaffolding protein subunits do not assemble separately but, upon mixing, copolymerize into double-shelled procapsids in vitro. The polymerization reaction displays the characteristics of a nucleation limited reaction: a paucity of intermediate assembly states, a critical concentration, and kinetics displaying a lag phase. Partially formed shell intermediates were directly visualized during the growth phase by electron microscopy of the reaction mixture. The morphology of these intermediates suggests that assembly is a highly directed process. The initial rate of this reaction depends on the fifth power of the coat subunit concentration and the second or third power of the scaffolding concentration, suggesting that pentamer of coat protein and dimers or trimers of scaffolding protein, respectively, participate in the rate-limiting step.

In double-stranded DNA bacteriophages, packaging of dsDNA requires the transformation of a precursor procapsid into a mature viral capsid. Lattice expansion and release of scaffolding subunits accompanying DNA packaging. Three-dimensional structures of procapsid and mature phage lattices demonstrate that the capsid transformation involves substantial changes in subunit environment. Since this transformation occurs without subunit dissociation, it represents a transition between at least two stable subunit conformations. Using Raman spectroscopy, we have identified changes in coat protein secondary structure and side-chain environments which accompany the capsid transformation. The subunits of procapsid shells contain only 2.0 +/- 0.4% more alpha-helix and less beta-sheet than those of mature capsids; however, numerous side chains are substantially altered by the transformation, including tyrosines, tryptophans, phenylalanines, and aliphatics, which are widely distributed through the subunit sequence. We propose, therefore, that procapsid expansion is accomplished through the relative motion of coat subunit domains with little change in secondary structure. Such hinge-bending conformational transitions may couple ATP-dependent dsDNA condensation with shell expansion.

The formation of closed icosahedral capsids from a single species of coat protein subunit requires that the subunits assume different conformations at different lattice positions. In the double-stranded DNA bacteriophage P22, formation of correctly dimensioned capsids is mediated by interaction between coat protein subunits and scaffolding protein. Raman spectroscopy has been employed to compare the conformations of coat protein subunits which have been polymerized to form capsids in the presence and absence of the of scaffolding protein display a Raman spectrum characterized by a broad amide I band centered at 1665 cm-1 with a discernible shoulder near 1653 cm-1, and a broad amide III profile centered at 1238 cm-1 but asymmetrically skewed to higher frequency. These spectral features indicate that the protein conformation in procapsid shells is rich in beta-sheet secondary structure but contains also a significant distribution of alpha-helix. When biologically active, purified subunits assemble in the absence of scaffolding protein, they form polydisperse multimers lacking the proper dimensions of procapsid closed shells. We designate these multimers as "associated subunits" (AS). The Raman spectrum of associated subunits indicates a narrower distribution of secondary structure. The associated subunits are characterized by a sharper and more intense Raman amide I band at 1666 cm-1, with no prominent amide I shoulder of lower frequency. An analogous narrowing of the Raman amide III profile is also observed for AS particles, with an accompanying shift of the amide III band center to 1235 cm-1.(ABSTRACT TRUNCATED AT 250 WORDS)

Coat and scaffolding subunits derived from P22 procapsids have been purified in forms that co-assemble rapidly and efficiently into icosahedral shells in vitro under native conditions. The half-time for this reaction is approximately five minutes at 21 degrees C. The in vitro reaction exhibits the regulated features observed in vivo. Neither coat nor scaffolding subunits alone self-assemble into large structures. Upon mixing the subunits together they polymerize into procapsid-like shells with the in vivo coat and scaffolding protein composition. The subunits in the purified coat protein preparations are monomeric. The scaffolding subunits appear to be monomeric or dimeric. These results confirm that P22 procapsid formation does not proceed through the assembly of a core of scaffolding, which then organizes the coat, but requires copolymerization of coat and scaffolding. To explore the mechanisms of the control of polymerization, shell assembly was examined as a function of the input ratio of scaffolding to coat subunits. The results indicated that scaffolding protein was required for both initiation of shell assembly and continued polymerization. Though procapsids produced in vivo contain about 300 molecules of scaffolding, shells with fewer subunits could be assembled down to a lower limit of about 140 scaffolding subunits per shell. The overall results of these experiments indicate that coat and scaffolding subunits must interact in both the initiation and the growth phases of shell assembly. However, it remains unclear whether during growth the coat and scaffolding subunits form a mixed oligomer prior to adding to the shell or whether this occurs at the growing edge.