Search

The Space Plasma Environment Research Facility (SPERF) is a new ground-based experimental device for fundamental research studies on space plasma currently under construction at Harbin Institute of Technology in China. Scientific objectives of the SPERF include studying the asymmetric reconnection dynamics relevant to the interaction between the interplanetary and magnetospheric plasmas, reproducing the inner magnetosphere to simulate the processes of trapping, acceleration, and transport of energetic charged particles restrained in a dipole magnetic field configuration, and revealing the physical mechanism of the dipolarization front in the magnetotail. The device comprises a vacuum chamber, 11 coils consisting of 18 groups of sub-coils that are independently programmablely energized, and the plasma source system to provide the magnetic field and the plasma required by the physical experiments. Thus, each of these 18 groups of sub-coils requires a separate pulsed power supply; furthermore, the 18 pulsed power supplies constitute the pulsed power supply system of the SPERF of which the total storage energy is up to 18.3 MJ, and the technical challenges have to be overcome. The power supply energizing a dipole field coil (labeled OJC coil) wired by the copper wire to provide a dipole magnetic field is the most energetic power supply (labeled OJC power supply) with a 2.42 MJ, 16.8 mF capacitor bank charged to 20 kV. The OJC power supply delivers a current with a peak of 18 kA for a rise time of ∼26.69 ms, and the duration of the current is not less than 95% of the peak over 10 ms to the OJC coil. Meanwhile, the most challenging power supply is the power supply labeled poloidal field power supply with a 5.04 mF capacitor bank charged to 20 kV, which provides the excitation current for the load coil set with the current not less than 360 kA at the typical time of 0.11 ms to produce the sufficient growth of the magnetic field that the experiments need. In this paper, the overall design of the pulsed power supply system, the design concept of the modularization, and the principle selection basis of the key components are presented. The technical details of each power supply will be demonstrated in the future. [ABSTRACT FROM AUTHOR]

In order to generate a current pulse with tens of milliseconds flattop time on an inductive load for pulse magnetic window technology research, a prototype of pulsed power supply is fabricated and tested. It is composed of several pulse forming units with capacitor banks and a thyristor switch and can generate a flattop current pulse by triggering sequentially the thyristor valve of pulse forming units at certain time or adjust a current waveform by altering triggering time of units. The results show that the prototype with four pulse forming units can generate a current pulse with 5 ms flattop time and 35 kA peak current, and its energy transfer efficiency is significantly higher than that of conventional circuits such as parallel capacitor banks or pulse forming networks. [ABSTRACT FROM AUTHOR]