Search

This paper reports on the development of a micro electro mechanical system microphone consisting of a piezoresistive cantilever and a micro HR (Helmholtz resonator) for use as an ultrasonic proximity sensor. The resonance frequency of the HR was designed to be equal to that of the cantilever. Therefore, the HR increases the sensitivity of the microphone to ultrasonic waves. The dimensions of the fabricated HR and the cantilever are 1.2 mm × 1.2 mm × 0.6 mm and 130 &mgr;m × 40&mgr;m × 0.3 &mgr;m, respectively. At a resonance frequency of 22.6 kHz, the cantilever with the HR detected ultrasonic waves with 14 times greater sensitivity than that of the cantilever without the HR. We demonstrated that the fabricated sensor is capable of measuring distances between 0.5 and 6.0 m. [ABSTRACT FROM AUTHOR]

This paper describes a parallel piezoresistive cantilever that is composed of a force-sensing cantilever in addition to a reference cantilever for photoresponse compensation. Piezoresistive cantilevers have been applied in many cellular mechanical measurement studies because of their high sensitivity, high time resolution and ease of handling. However, the electrical resistance changes in response to the excitation light of the fluorescence microscope, which affects the cell measurements. We measured the I-V characteristics of a piezoresistive layer. These photoresponses occurred due to the internal photoelectric effect. We canceled the photoresponses using the reference cantilever. This paper demonstrates compensation of the cantilever photoresponse under irradiation at different angles, wavelengths and light intensities. As a result, the photoresponse could be decreased by 87%. [ABSTRACT FROM AUTHOR]