Search

Bone cements with the feature of easily shaping could ideally match the defect site and prevent the ingrowth of fibrous tissue. In this manuscript, a biodegradable tricalcium silicate (C 3 S)/glucono-delta-lactone (GDL)/calcium sulfate dihydrate (CSD) organic-inorganic composite cement was fabricated with shorter setting time (less than 15 min) and high preliminary mechanical property (5.27 MPa in the first hour). Many methods were applied to study the physicochemical and biological properties of the cement in vitro. The weight loss in PBS can reach 58% after 12 weeks soaking indicating the better biodegradability. The excellent bioactivity in vitro was emerging after the cement was soaked in the simulated body fluid. The cell experiments showed that suitable concentration of the extract liquid of cement was conducive to the proliferation, differentiation and extracellular matrix calcification of the mouse bone marrow stromal cells. Briefly, the C 3 S/GDL/CSD composite cement would have the bright capacity for bone filling., (Copyright © 2020 Elsevier B.V. All rights reserved.)

Calcium sulfate bone cement (CSC) is extensively used as a bone repair material due to its ability to self-solidify, degradability, and osteogenic ability. However, the fast degradation, low mechanical strength, and insufficient biological activity limit its application. This study used magnesium polyphosphate (MPP) and constructed a composite bone cement composed of calcium sulfate (CS), MPP, tricalcium silicate (C3S), and plasticizer hydroxypropyl methylcellulose (HPMC). The optimized CS/MPP/C3S composite bone cement has a suitable setting time of approximately 15.0 min, a compressive strength of 26.6 MPa, and an injectability of about 93%. The CS/MPP/C3S composite bone cement has excellent biocompatibility and osteogenic capabilities; our results showed that cell proliferation is up to 114% compared with the control after 5 days. After 14 days, the expression levels of osteogenic-related genes, including Runx2, BMP2, OCN, OPN, and COL-1, are about 1.8, 2.8, 2.5, 2.2, and 2.2 times higher than those of the control, respectively, while the alkaline phosphatase activity is about 1.7 times higher. Therefore, the CS/MPP/C3S composite bone cement overcomes the limitations of CSC and has more effective potential in bone repair. [ABSTRACT FROM AUTHOR]

Adenosine triphosphate (ATP), acting as a source of energy, has effects on cellular activities, such as adhesion, proliferation, and differentiation. In this study, ATP-loaded calcium sulfate hemihydrate/calcium citrate tetrahydrate cement (ATP/CSH/CCT) was successfully prepared for the first time. The effect of different contents of ATP on the structure and physicochemical properties of ATP/CSH/CCT was also studied in detail. The results indicated that incorporating ATP into the cement did not significantly alter their structures. However, the addition ratio of ATP directly impacted the mechanical properties and in vitro degradation properties of the composite bone cement. The compressive strength of ATP/CSH/CCT gradually decreased with an increasing ATP content. The degradation rate of ATP/CSH/CCT did not significantly change at low concentrations of ATP, but it increased with a higher ATP content. The composite cement induced the deposition of a Ca-P layer in a phosphate buffer solution (PBS, pH = 7.4). Additionally, the release of ATP from the composite cement was controlled. The ATP was controlled releasing at the 0.5% and 1% ATP in cement by the diffusion of ATP and the degradation of the cement, whereas it was controlled by the diffusion process merely at the 0.1% ATP in cement. Furthermore, ATP/CSH/CCT demonstrated good cytoactivity with the addition of ATP and is expected to be used for the repair and regeneration of bone tissue. [ABSTRACT FROM AUTHOR]