Search

This work has been conducted to investigate the effect of accelerated ageing on the filler-free (control) handsheets and the ones having Precipitated Calcium Carbonate (PCC) and Zeolite (Clinoptilolite) fillers. The diagnosis approach of this work has been based on the use of the techniques of attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR) and X-ray diffraction (XRD). The FT-IR technique has allowed identifying the changes in cellulose components of handsheets. Likewise, the XRD technique has provided to diagnose the changes in crystallinity of the handsheets and fillers. The results found out that PCC and Zeolite fillers could be easily added to the structure of the paper network by changing various experimental variables. The loss of C−O functional groups and the formation of carbonyl groups in handsheets has been analysed by accelerated ageing. The spectroscopy results confirmed that usage of zeolite filler has a retarding and structurally improving effect on the glycosidic linkages. Recent findings have been provided new insights into the role of the synergistic effect of the combination of PCC and zeolite fillers in the decelerating of certain ageing mechanism. [ABSTRACT FROM AUTHOR]

The focus of this research is the stabilisation of paper with Verdigris, a green copper pigment. Due to its corrosive effects on paper, many important documents, paintings and maps are in danger. The efficiency of several commercially available deacidification agents on paper samples with Verdigris was tested, including magnesium-based Bookkeeper® dispersion, nano calcium hydroxide containing Nanorestore® and CaLoSiL® dispersions as well as a recently developed dispersion of nano calcium carbonate. The antioxidant tetrabutylammonium bromide was tested either alone or in combination with nano calcium based deacidification agents. The effect of the treatments was evaluated using colour, tensile strength, degree of polymerization and pH measurements. The results indicate that acidic degradation does not play a major role during accelerated degradation of paper containing Verdigris with moderately acidic pH value and that oxidative decay could be the main culprit of the decay. The method described, which involves the use of antioxidant tetrabutylammonium bromide in combination with calcium carbonate based deacidification dispersion, was proved to have a superior effect against degradation of paper with Verdigris in comparison to the treatments which involve deacidification agents only. Nano calcium hydroxide based deacidification agents result in high pH values of the paper samples and therefore cannot be advised for use on paper documents. [ABSTRACT FROM AUTHOR]

Strongly degraded cellulosic artworks usually need deacidification and consolidation. Alkaline nanoparticles are known to be effective in neutralizing the acidity, while cellulose nanocrystals have the potential to be used as compatible and effective strengthening agents. We have grafted cellulose nanocrystals with oleic acid using a 1′1-carbonyldiimidazole-mediated procedure, to increase their dispersibility in organic solvents, and synthesized Ca(OH) 2 or CaCO 3 nanoparticles via a solvothermal process. Grafted nanocellulose and alkaline nanoparticles were used to prepare ethanol-based "hybrids". Prior to the application, the physico-chemical properties of nanocellulose dispersions and "hybrids" were studied by rheology and small-angle X-ray scattering. Cellulose nanocrystals were effectively grafted and stably dispersed in ethanol. It was shown that the use of ethanol as a dispersing medium, and the addition of alkaline nanoparticles act in a synergistic way, increasing the interactions between grafted cellulose nanocrystals, leading to the formation of clusters. These dispersions are thixotropic, a behavior particularly appealing to conservation purposes, since they can be applied in the liquid state, or, when a more confined application is required, they can be applied in a gel-like state. As a result of the application, an improvement in the mechanical properties of paper and an increase of pH were obtained. [ABSTRACT FROM AUTHOR]

A composite filler was developed by pre-flocculation of fiber fines and precipitated calcium carbonate (PCC) particles with flocculants such as cationic polyacrylamide (cPAM) and bentonite. The composite filler was compared with a conventional loading method in terms of physical properties of handsheet and filler retention. The handsheets using the composite filler showed higher strength properties than that using a conventional loading at a similar paper ash content level, implying that paper ash content can be increased maintaining same level of paper strength. Optical properties such as opacity and brightness of the paper with the composite were quite similar with the paper with the conventional loading. Filler retention of the composite filler was slightly higher than that of the conventional loading even though retention aids were not used for the composite filler. Paper formation of the composite filler was better than the case of the conventional loading. However, the sheet with the composite filler showed lower bulk than that with the conventional loading. Conclusively, the composite filler technology by pre-flocculation of fines and filler has a potential to be utilized to produce a high loaded paper. [ABSTRACT FROM AUTHOR]

This article presents a novel method for integrating native corn starch and calcium carbonate (CaCO 3 ) into a hybrid pigment, which can be applied in papermaking to increase the amount of starch in paper and improve sheet bonding without impairing dewatering. Starch was first thermally treated to partially gelatinize and swell the granules. The aim of the treatment was to change the surface properties of starch and thus to improve the interaction with CaCO 3 particles. CaCO 3 shell was precipitated around the swollen granules and the encapsulated starch was then cooked to achieve complete gelatinization. When the granules were cooked, the starch became active for bonding, but its solubility was very limited due to the encapsulation. Particle size measurement and scanning electron microscopy were used to analyze the sample properties during the preparation. The hybrid pigment was added to paper sheets and its effect on the paper properties was examined. Starch was shown to be effectively bound to the pigment structure. The hybrid pigment allowed a large amount of native corn starch to be added to paper without interfering with the papermaking process. Furthermore, it gave excellent mechanical paper properties. [ABSTRACT FROM AUTHOR]

The purpose of this study was to evaluate the feasibility of using highly filled powders with 100 parts per weight of calcium carbonate and 10 parts per weight of polymer, acting as binder, as electrostatically applied paper coatings. Such powders prepared by different methods were evaluated as being suitable for electrostatic coating. Powders compacted at elevated temperatures demonstrated cohesion superior to that of calcium carbonate, and at best similar to that of aqueous coatings. Cohesion, porosity and thus absorption properties of compacted powders were affected by the powder preparation method, compaction process, and powder composition. Powders containing semicrystalline polymer turned out to be the most interesting for further testing. [ABSTRACT FROM AUTHOR]

Abstract: The commercially available copy papers and pure papers have been adopted to synthesize carbon nanomaterials. It is found that carbon nanocoils (CNCs) are efficiently synthesized on the copy paper substrates using Fe2(SO4)3/SnCl2 catalyst by a thermal chemical vapor deposition method, while only carbon nanotubes (CNTs) are obtained on the pure paper substrate using the same process. It is evidenced that the particles of calcium carbonate existing in copy paper aggregate catalyst and adsorb more sulfur elements which promote the growth of CNCs. In addition, CNCs can successfully grow out from the pure paper by adding calcium carbonate. [Copyright &y& Elsevier]

Precipitated calcium carbonate (PCC) is a filler that is widely used for papermaking, and lime sludge is a special type of PCC recovered from the black liquor from kraft pulping. There has been some concern that lime sludge may interfere with the development of paper's hydrophobicity in comparison with commercial PCC and ground calcium carbonate (GCC) due to the presence of impurities when alkyl ketene dimer (AKD) is used as the sizing additive. In this work, fillers with different particle size distributions were prepared, and the effects of particle composition on surface chemistry of fillers, adsorption for AKD, sizing degree of final paper sheets, and retention behavior of fillers were evaluated. The results showed that, through matching different particle size distributions for lime sludge fillers, the negative zeta potential decreased from -26.2 mV to -20.8 mV, the specific surface area decreased from 15.0 m²/g to 9.1 m²/g, and total pore volume decreased from 0.037 cm³/g to 0.026 cm³/g, which was favorable for the low adsorption for AKD. Consequently the sizing effect of filled paper was improved. Moreover, the retention rate also was increased by changing the particle size distribution of lime sludge. [ABSTRACT FROM AUTHOR]

The goal of this study was to analyze the effects of cellulose fibers loading by precipitation in-situ of calcium carbonate over the properties of printing paper obtained from mixtures of the softwood and hardwood fibers. The effects of fibers with in-situ loading were analyzed comparatively with conventional paper loading respectively, by adding precipitated calcium carbonate into fiber stock. The effectiveness of the methods was evaluated by various analyses and investigations: calcium carbonate content, Scanning electron microscope (SEM) images, X-ray diffraction, optical and mechanical properties of the paper sheets. The evaluation of the effects on paper properties led to the conclusion that, at the same filler content, the in-situ loading method gives higher opacity and brightness than conventional methods. The utilization of cellulose fibers with in-situ loading as additive, shown as a modification of the ratio between fibers with in-situ loading and fibers without loading, regardless of whether they are softwood or hardwood fibers, allowed us to optimize printing paper properties, especially regarding the relationship between optical and strength properties. [ABSTRACT FROM AUTHOR]

The paper has always been and it remains to be the primary information carrier though only 0.1% of the total information is recorded on this media. The paper production industry has a great impact on the environment which is mostly due to the use of raw materials (wood of conifers and deciduous trees), fillers (CaCO3), additional materials (dyes, glue, binders, retention aids), and chemicals (acids and bases). However, the greatest impact on the environment is caused by the extensive water consumption. To produce 1 ton of paper up to 60 m3 of fresh water are necessary. The water is not the only resource needed in the production cycle. Besides, the consumption of electrical energy (approximately 10,000 MJ/tpap), waste paper (paper represents 35 % of waste), and air pollution (paper production and transport) should be taken into consideration. In spite of the above mentioned environmental threats the paper still remains an important element of the everyday life and the use of modern information technology (personal computers, telefax, Internet) has increased its demand and consumption. It is important that the paper is produced from natural materials which are later released into environment without significant environmental consequences. The technology of paper recycling and re-use is widely known and a must of any responsible and professional social environment. Digitisation has increased the consumption of electrical energy as a consequence of production, use and reprocessing of different devices. Unlike a written record, a digital record has no permanent value and the electromagnetic field has a negative effect on the digital records. Digital records have to be constantly updated and adjusted to the computer software and hardware. A book and its content represent a treasure and an invaluable part of the cultural heritage. To use a book it is necessary to learn the alphabet whereas to read digital records we need to be computer and information literate. Negative effects of digitisation have affected the production of paper as the demand for graphic paper (newsprint, writing, printing paper) has decreased. The demand for raw materials, products and semi-manufactured products has decreased, too. Consequently, the level of investments in modernisation of equipment and in new production lines has been equally reduced. The proportion of employees directly or indirectly involved in the paper making and paper processing industry has been diminished. In the European Union paper and paper processing industry employ 1.9 million people in 200,000 enterprises representing 6.5 % of turnover in the production sector or 80 billion EUR or 16 billion EUR of the value added per year. The EU is expected to prevent the decline of paper and paper related industry (graphic, construction, logistic) which would endanger the production -- consumption cycle. After all, dismissals can ruin the social equilibrium. However, the paper production is faced with a difficult situation caused by digitisation. The competitiveness of the global market has an impact on the labour force costs, raw materials and energy products. Besides, production costs within the European Union are not competitive because of the EU Regulations and Directives which affect the price of raw materials, semi products and energy products. All these facts led to the decrease of workforce and the loss of market leading position and competitiveness. [ABSTRACT FROM AUTHOR]

The penetration of ink into paper affects the final appearance of printing and the amount of ink usage. In this work, UV-curing fluorescent rose ink was used to investigate the penetration and distribution of the ink pigments as well as their correlation with the surface topography of paper. The ink penetration and distribution were characterized with Confocal Laser Scanning Microscopy (CLSM), whereas the microstructure of the paper surface was observed using Atomic Force Microscopy (AFM). The AFM results showed that the surface of the paper coated with kaolin layer was the smoothest among the samples. Also the pore size of the calcium carbonate coating layer was smaller than that of the kaolin coating layer. Meanwhile, the pore size distribution of the calcium carbonate coating layer appeared to be relatively narrow, compared with other samples. The results of CLSM images indicated that the depth, size, and arrangement of pores affected the penetration depth and distribution of ink pigment on coated paper. The large pores led to deeper penetration of ink pigments, and uniform ink absorption occurred when the pore distribution was uniform. The UV-curing ink pigments not only set on the surface of the uncoated paper, but also they penetrated into the paper interior and adhered to the fiber surface. [ABSTRACT FROM AUTHOR]

Inorganic fillers are inexpensive materials used to increase the density, smoothness and other properties of paper that are important for printing. In the current study, the adhesion of pressure-sensitive adhesives (PSAs), a common type of adhesive used in labels and tapes, to papers containing varying amounts and types of fillers is investigated. Papers with three types of fillers, precipitated calcium carbonate (PCC), ground calcium carbonate (GCC) and kaolin clay, were investigated. The compositions of the papers were examined with SEM/EDX, while peel and double cantilever beam (DCB) tests were used to assess PSA-paper adhesion. The results indicate that fillers enhance the adhesion between PSA and paper. In the case of the peel tests, a combination of inter-fiber bond strength and PSA-paper adhesion determines the peel strength. While in the DCB tests, failure is isolated to the PSA-paper interface, thus allowing measurements of pure interfacial failure. [ABSTRACT FROM AUTHOR]

Abstract: Nanoscaled surface roughness with a hydrophobically modified surface has been widely used for preparation of superhydrophobic materials. However, the complicated procedure, high cost and harmful compounds used in most superhydrophobic surface modifications limited their applications. This research aims at fabricating superhydrophobic cellulosic or semi-superhydrophobic papers with low cost and nontoxic materials. Commercial PCC (precipitated calcium carbonate) particles, hydrophobic stearic acid and polymer latex particles were used for surface roughness control, surface hydrophobic modification agent, and polymer binder, respectively. A simple coating or dipping method was used to produce high contact angle and high water resistance papers. It was found that the surface pretreatment of PCC with fatty acid salt prior mixing with polymer binder plays important role for improving the water contact angle (WCA). The combination of surface coating with dipping treatment will further increase the water contact angle and water resistance of the paper. A WCA near 150° over modified paper surface has been achieved. At the same degree of water resistance, the total cost of the paper can be significantly reduced by our method. [Copyright &y& Elsevier]

Deacidification is an established conservation treatment for the prolongation of the acidic paper stability. Several different deacidification systems are in use today, such as the dispersions of alkaline nanoparticles in organic solvents. The aim of the study was to compare the effects of different calcium nanoparticle dispersions in alcohols on lignocellulosic paper. Commercially available nano calcium hydroxide dispersions for paper deacidification, and laboratory prepared nano calcium carbonate dispersions in ethanol and 2-propanol were investigated and compared as to their effectiveness in increasing the stability of paper. The FE-SEM analyses were used to determine the size of Ca(OH)2 and CaCO3 particles in the dispersions. The SEM–EDS analyses were performed both on the paper surface and its cross-section in order to ascertain the distribution of calcium ions following the deacidification treatment. An evaluation of the changes of color, molecular weight, pH and alkaline reserve on different lignocellulosic papers was performed. In comparison to untreated samples, our results indicate all the investigated deacidification treatments decrease the degradation rate constant of cellulose, as determined by accelerated degradation. However, the treatments involving nano calcium hydroxides in both alcohols noticeably affect the color of the treated lignocellulosic papers. According to the obtained results, nano calcium carbonate is therefore the more suitable deacidification agent for the lignin containing papers. [ABSTRACT FROM AUTHOR]

The article highlights the results of a study on the quantity of paper that comes from one tree by Phil Whiteman of Grand Ridge Plantations, operating in the Strzelecki Ranges, Victoria. The findings include: a typical plantation eucalypt has a volume of 1 m³, wood density is about 500 kg m³ requiring 7.14 liters of wood, pulp yield is about 50 percent requiring 3.57 kg of oven-dried wood, copy paper is about 80 percent fiber and 20 percent calcium carbonate and one ream of paper has 500 sheets and has area of 31.185 m².