1. Utilizing 3,4-ethylenedioxythiophene (EDOT)-bridged non-fullerene acceptors for efficient organic solar cells
- Author
-
Young Hoon Kim, Sung Jae Jeon, Nam Gyu Yang, Ie Na Kim, Doo Kyung Moon, and Ji Hee Yun
- Subjects
Fullerene ,Materials science ,Organic solar cell ,business.industry ,Band gap ,Photovoltaic system ,Energy conversion efficiency ,Energy Engineering and Power Technology ,02 engineering and technology ,010402 general chemistry ,021001 nanoscience & nanotechnology ,01 natural sciences ,0104 chemical sciences ,Fuel Technology ,Electrochemistry ,Optoelectronics ,0210 nano-technology ,business ,Ternary operation ,Absorption (electromagnetic radiation) ,HOMO/LUMO ,Energy (miscellaneous) - Abstract
A rational design of efficient low-band-gap non-fullerene acceptors (NFAs) for high-performance organic solar cells (OSCs) remains challenging; the main constraint being the decrease in the energy level of the lowest unoccupied molecular orbitals (LUMOs) as the bandgap of A-D-A-type NFAs decrease. Therefore, the short current density (Jsc) and open-circuit voltage (Voc) result in a trade-off relationship, making it difficult to obtain efficient OSCs. Herein, three NFAs (IFL-ED-4F, IDT-ED-4F, and IDTT-ED-2F) were synthesized to address the above-mentioned issue by introducing 3,4-ethylenedioxythiophene (EDOT) as a π-bridge. These NFAs exhibit relatively low bandgaps (1.67, 1.42, and 1.49 eV, respectively) and upshifted LUMO levels (-3.88, −3.84, and −3.81 eV, respectively) compared with most reported low-band-gap NFAs. Consequently, the photovoltaic devices based on IDT-ED-4F blended with a PBDB-T donor polymer showed the best power conversion efficiency (PCE) of 10.4% with a high Jsc of 22.1 mA cm−2 and Voc of 0.884 V among the examined NFAs. In contrast, IDTT-ED-4F, which was designed with an asymmetric structure of the D-π-A type, showed the lowest efficiency of 1.5% owing to the poor morphology and charge transport properties of the binary blend. However, when this was introduced as the third component of the PM6:BTP-BO-4Cl, complementary absorption and cascade energy-level alignment between the two substances could be achieved. Surprisingly, the IDTT-ED-4F-based ternary blend device not only improved the Jsc and Voc, but also achieved a PCE of 15.2%, which is approximately 5.3% higher than that of the reference device with a minimized energy loss of 0.488 eV. In addition, the universality of IDTT-ED-2F as a third component was effectively demonstrated in other photoactive systems, specifically, PM6:BTP-eC9 and PTB7-Th:IEICO-4F. This work facilitates a better understanding of the structure–property relationship for utilizing efficient EDOT-bridged NFAs in high-performance OSC applications.
- Published
- 2022